- Fixed read remote feature timeout when using coded phy
- Fixed disconnection issue(0x08) when using 125k coded phy
- Fixed disconnection issue(0x08) when updating connection param
- Fixed disconnection issue(0x08) when using multi connection
- Avoid error when adding duplicate device to whitelist
- Support disable channel assessment by vendor hci
- Support smaller connection interval (3.75 ms)
- Support duplicate exception list in EVT ADV
fix(mbedtls): Fix `test_rebuild_source_files` failure on Windows caused by unstable CMake Ninja paths
Closes IDFCI-10453
See merge request espressif/esp-idf!47984
On RISC-V chips with SPIRAM support (esp32c5, esp32c61, esp32h4, esp32p4,
esp32s31), esp_restart_noos() was disabling the cache while the current
stack pointer could still be in external RAM. Any stack access after cache
disable (function call, local variable spill) would then fault with
"Cache disabled but cached memory region accessed".
Xtensa chips (esp32, esp32s2, esp32s3) already had this guard via the
SET_STACK macro. Add the equivalent for RISC-V:
- Add rv_utils_set_sp() to riscv/rv_utils.h (plain "mv sp, %0" with a
memory clobber; no window register management needed on RISC-V)
- In each affected system_internal.c, under
CONFIG_FREERTOS_TASK_CREATE_ALLOW_EXT_MEM, check whether the current
SP is in PSRAM and if so switch it to the top of internal BSS before
any cache disable or writeback operation
- Fix xTaskCreateStaticPinnedToCore() stack size argument in the
spiram_stack test (was passing bytes instead of word count)
- Mark the null-pointer write in func_do_exception() as volatile to
prevent the compiler from optimizing it away
- Extend the [spiram_stack] tests to RISC-V by sharing fibonacci() and
the task/finish helpers across architectures, guarding only the
Xtensa-specific WINDOWBASE/WINDOWSTART prints
esp_mem.c in the builtin target via
target_sources(builtin PRIVATE ...) called from the parent CMakeLists.
This cross-directory source injection causes CMake's Ninja generator on
Windows to produce unstable TARGET_PDB/RSP_FILE paths across
reconfigures, changing the ninja command hash and forcing a re-archive
of libmbed-builtin.a on every cmake run — even when no source changed.
This broke test_rebuild_source_files.
Fix by adding esp_mem.c to the IDF mbedtls component library
(mbedtls_srcs) instead. The final ELF link uses --start-group, so
builtin's platform.o resolves esp_mbedtls_mem_calloc/free from the
component library regardless of archive order. esp_mem.c is IDF-specific
code (heap_caps_calloc, sdkconfig.h) and belongs in the port layer, not
in any submodule target.
fix(ulp/lp_core): fix LP UART data_bits validation and add full word-length test coverage
Closes PM-715, PM-660, IDFCI-10410, and IDFCI-10464
See merge request espressif/esp-idf!47432
Add LP SPI HAL LL layer for ESP32-S31 and ESP32-P4, enable the
peripheral in soc_caps, and port the HP-side and LP-core-side SPI
drivers to use the new LL abstraction.
Marius Vikhammer
Guillaume Souchere
Ma Jing Jing
Shu Chen
Island
Wang Meng Yang
Fu Hanxi
zhanghaipeng
Jakub Kocka
Xu Si Yu
Armando (Dou Yiwen)
Chen Chen
renpeiying
ShenWeilong
Euripedes Rocha
Jiang Jiang Jian
Sudeep Mohanty
Rahul Tank
morris
Aditya Patwardhan
Lv Xin Yue
Harshal Patil
luoxu
Marek Fiala