Correct "802.154" to "802.15.4" and change the EUI-64 derivation notation
from base_mac[0:3]/base_mac[3:6] to the inclusive base_mac[0:2]/base_mac[3:5]
in the esp32h2/esp32h21/esp32h4 Kconfig.mac help text and the EN/zh_CN
misc_system_api docs.
Co-authored-by: Cursor <cursoragent@cursor.com>
(cherry picked from commit 811c64c17c)
Add help text to the esp32h2/esp32h21/esp32h4 Kconfig.mac explaining
that these chips only consume one universally administered MAC address:
the IEEE 802.154 EUI-64 is derived from the base MAC and MAC_EXT, and
Bluetooth reuses the base MAC as-is (no BT offset, since there is no
Wi-Fi).
Add a matching 1-MAC derivation table and note to misc_system_api.rst
(EN and zh_CN) under a new `.. only:: esp32h2 or esp32h21 or esp32h4`
block, and exclude these targets from the generic 4/2 table.
Add an esp32s31-only note stating that the "Four" option may only be
used with a customer-provided custom base MAC range, since ESP32-S31
only provides two universally administered MAC addresses in eFuse.
Co-authored-by: Cursor <cursoragent@cursor.com>
(cherry picked from commit e3bc260178)
- esp_tls_mbedtls: require cert when PSA-backed server/client key is set
- esp_tls_mbedtls: drop redundant pk_init/x509_crt_init (calloc handles it)
- psa SE driver: copy callbacks/opaque_key by value (no lifetime coupling)
- psa SE driver: replace atomic CAS with simple null check on register
- psa SE driver: use sig_len from sign callback with bounds validation
- psa SE driver: validate pubkey_len returned by export_pubkey callback
- psa SE driver: check hash sub-alg in RSA PKCS1V15 branch of validate_request
- psa SE driver: align secure_element_register_callbacks doc with value-copy impl
- esp_https_server: initialize server_key in HTTPD_SSL_CONFIG_DEFAULT
- mbedtls: move SECURE_ELEMENT_DRIVER_ENABLED to esp_config.h for parity
with ESP_ECDSA_DRIVER_ENABLED; drop target_compile_definitions
- docs: fix esp_tls_cfg_t -> esp_http_client_config_t cross-reference
- docs: check psa_import_key() status in ESP-TLS PSA example
- hints/error_output: point at CONFIG_MBEDTLS_SECURE_ELEMENT_DRIVER_ENABLED
(cherry picked from commit 08b567ef3b)
Update esp_tls, esp_http_client docs and migration guide to reflect
the new esp_key_config_t interface and secure element PSA driver.
(cherry picked from commit 37808e2386)
Add generic secure element PSA driver with runtime callback registration.
Consolidate Kconfig into single MBEDTLS_SECURE_ELEMENT_DRIVER_ENABLED option.
Closes https://github.com/espressif/esp-idf/issues/18388
(cherry picked from commit 1c20f525b4)
Add async color convert coverage for direct RGB24/BGR24 byte-order swaps
and
thread both TX and RX CSC state through DMA2D transactions for future
extensibility.
Embed a 720p BGR raw asset and stream the encoded JPEG over UART so
this example no longer depends on SD card setup.
Add pytest coverage that reconstructs the JPEG from base64 output and
compares it against a checked-in golden image.
Define per-target SDIO slave descriptor buffer limits in the LL layer and validate queued send buffers against the 4-byte aligned effective maximum. Update the public docs to describe the chip-dependent limit instead of hardcoding 4092 bytes.
Co-authored-by: Cursor <cursoragent@cursor.com>
Default timeout for interrupt WDT was increased by default
on ESP32, due to some heap integrity check APIs taking a long
time on large PSRAMs and causing timeouts.
But this adjustment was only done for ESP32, not later chips,
even though they may experience the same issue.
Adjusted to have the same behavior on all chips with PSRAM
enabled, making it consistant with the docs.
Closes https://github.com/espressif/esp-idf/issues/18360
After startup is done and app_main is reached, all calls to
heap_caps_add_region_with_caps (adding a new heap to the list of registered
heaps) will not affect the minimum free heap size value.
For heaps created before startup, this won't apply and their size will
end up being taken into account in the calculation of the minimum.
