Wrap MWDT-related code under SOC_WDT_SUPPORTED so targets without a main
watchdog can compile.
Add SOC_RTC_WDT_SUPPORTED for RTC watchdog usage (bootloader, slow-clock
paths) and regenerate Kconfig.soc_caps.in. Bootloader RWDT setup stays
under SOC_RTC_WDT_SUPPORTED; MWDT flashboot teardown stays under
SOC_WDT_SUPPORTED.
ESP_INT_WDT, ESP_TASK_WDT_EN, and BOOTLOADER_WDT_ENABLE depend on
SOC_WDT_SUPPORTED where applicable. Build xt_wdt.c only when
SOC_XT_WDT_SUPPORTED. Provide no-op panic WDT helpers when
SOC_WDT_SUPPORTED is disabled.
rename SOC_GPIO_DEEP_SLEEP_WAKE_VALID_GPIO_MASK to SOC_GPIO_HP_PERIPH_PD_SLEEP_WAKEABLE_MASK
rename SOC_GPIO_DEEP_SLEEP_WAKE_SUPPORTED_PIN_CNT to SOC_GPIO_HP_PERIPH_PD_SLEEP_WAKEABLE_PIN_CNT
rename SOC_GPIO_SUPPORT_DEEPSLEEP_WAKEUP to SOC_GPIO_SUPPORT_HP_PERIPH_PD_SLEEP_WAKEUP
bugfix(wifi): fix incomplete phy initialization due to absence of bb clocks at...
Closes ESPCS-1007 and ESPCS-997
See merge request espressif/esp-idf!42511
- Remove GPTIMER and TIMG related definitions from soc_caps_full.h files
- Move timer peripheral definitions to appropriate HAL layer files
- Update references across components to use proper HAL abstractions
- Consolidate timer group and GPTIMER capabilities organization
- Ensure consistent timer configuration across all ESP32 variants
This refactoring improves the separation of concerns between SOC
capabilities and HAL implementations for timer-related functionality.
The `-mtune=esp-base` option is identical to the default tuning profile,
except that `slow_unaligned_access` is set to false.
This reduces the instruction count for built-in `memcpy` and improves
performance, since our chips can handle misaligned access with minimal
penalty (without triggering exceptions).
Example:
void load(uint32_t *r, char* x) {
memcpy(r, x, sizeof(uint32_t));
}
void store(char* x, uint32_t v) {
memcpy(x, &v, sizeof(uint32_t));
}
Previously generated code:
load:
lbu a5,2(a1)
lbu a3,0(a1)
lbu a4,1(a1)
sb a5,2(a0)
sb a3,0(a0)
sb a4,1(a0)
lbu a5,3(a1)
sb a5,3(a0)
ret
store:
srli a3,a1,8
srli a4,a1,16
srli a5,a1,24
addi sp,sp,-16
sb a1,0(a0)
sb a3,1(a0)
sb a4,2(a0)
sb a5,3(a0)
addi sp,sp,16
jr ra
With `-mtune=esp-base`:
load:
lw a5,0(a1)
sw a5,0(a0)
ret
store:
sw a1,0(a0)
ret
Inlining behavior
=================
Without `-mtune=esp-base`:
- `memcpy()` is inlined only when the compile-time size is ≤ 12 bytes.
- Maximum cost: ~25 instructions
With `-mtune=esp-base`:
- `memcpy()` is inlined for all compile-time constant sizes.
- Maximum cost: ~14 instructions
As a result, some applications may see reduced code size, while others
may increase slightly. However, performance always improves because
extra `memcpy` calls are eliminated.
Performance results
===================
esp32p4 (Ethernet iperf):
- No noticeable difference
esp32c61 (Wi-Fi iperf):
- ~2 Mb/s increase for TCP and UDP TX (may be within measurement error)
NOTE
====
Applies only to RISC-V chips that do not have the hardware issue marked
by the SOC_CPU_MISALIGNED_ACCESS_ON_PMP_MISMATCH_ISSUE macro.
morris
muhaidong
gaoxu
wuzhenghui
wanckl
Song Ruo Jing
Meet Patel
He Binglin
Chen Chen
Armando (Dou Yiwen)
Jiang Jiang Jian
liuning
C.S.M
Jaroslav Burian
Harshal Patil
Chen Jichang
Alexey Lapshin