Fix DTM TX buffer leak in the BLE controller that could cause memory exhaustion and Interrupt WDT timeout during or after DTM TX tests. (6.0)
See merge request espressif/esp-idf!52615
BDL diskio test part only; the rest of the commit is already on release/v6.0
via 4f7b1af0f9, which predates components/fatfs/test_apps/bdl.
(cherry picked from commit a8b5b8d582)
The BLE log compression feature (CONFIG_BT_LOG_CRITICAL_ONLY ->
BLE_COMPRESSED_LOG_ENABLE) failed to build on Windows while working
correctly on Linux, due to two shell/platform-specific issues in the
compression script.
1. Module/source argument quoting. CMakeLists.txt passes the
semicolon-separated module and source lists wrapped in single quotes
("'${MODULES}'") to protect ';' from POSIX shells, which strip them.
cmd.exe does not treat single quotes as quoting characters, so on
Windows the quotes reached the script literally and
args.module.split(';') produced "'BLE_MESH" / "BLE_HOST'" instead of
the clean names. These never matched the YAML module keys, every
module was skipped ("Skipping module ... - config not found"), the
compressed sources were never generated, and the build failed. Strip
surrounding quote characters before splitting; this is a no-op on
Linux/macOS where the shell already removed them.
2. CRLF line endings. With core.autocrlf=true the IDF sources are
checked out as CRLF on Windows. The generated *_log_index.h macros
use backslash-newline line-continuation; a backslash followed by
'\r\n' is not a valid continuation in C, producing floods of syntax
errors when the header is compiled. Write generated headers with
newline='' to force LF, and normalize source content to LF right
after reading so '\r' embedded inside multi-line argument expressions
is also handled. Byte offsets stay consistent because both tree-sitter
parsing and tag replacement operate on the normalized content.
Verified by full clean builds of examples/bluetooth/esp_ble_mesh/
vendor_models/vendor_client (esp32c6, bluedroid + mesh) from both
cmd.exe and PowerShell; both produce an identical vendor_client.bin.
(cherry picked from commit aa9b565a6d)
Co-authored-by: luoxu <luoxu@espressif.com>
bt_mesh_bta_gatts_cb did not always answer ATT Read/Write Requests:
- READ: on a callback error it only logged a warning and sent nothing; a
0-byte read (Read Blob at an offset equal to the value length) also sent
nothing, although it is a successful empty read.
- WRITE: on a callback error it sent nothing, and a partial/zero write was
treated as success.
- Both: when the handle was not found or the attribute had no read/write
callback, the request was silently dropped.
An ATT Request must always be answered:
- READ: len >= 0 is success -> Read Response (a 0-byte read yields an empty
value); len < 0 -> ATT Error Response carrying the callback's error code
(-len, since BLE_MESH_GATT_ERR(x) == -x). The copy length is clamped to
the source buffer size as a defensive bound. If the handle is unknown or
the attribute has no read callback, respond with INVALID_HANDLE /
READ_NOT_PERMITTED.
- WRITE: when need_rsp is set, always reply. len == write length -> Write
Response; otherwise (negative ATT error, partial write, or 0) -> ATT
Error Response (the negative code, or UNLIKELY for partial/0). If the
handle is unknown or the attribute has no write callback, respond with
INVALID_HANDLE / WRITE_NOT_PERMITTED. Write Without Response still sends
no response.
A non-success status passed to BTA_GATTS_SendRsp is turned into an ATT
Error Response by the GATT layer (gatt_sr_process_app_rsp ->
gatt_send_error_rsp).
(cherry picked from commit ed1f4de3a3)
Co-authored-by: luoxu <luoxu@espressif.com>
The SoC RC_FAST approximation is a nominal figure that can be off by ~10%
from the clock the LP core actually runs at, which made
ulp_lp_core_delay_us() over-delay by up to 9% and the LP core delay test
flake on ESP32-C5 and ESP32-C6.
Use a measured per-target value instead, and fail the build for targets
that have no measured value so that new chips cannot silently inherit a
wrong one.
1. Added validation for password and reserved data length in ESPTouch v2
2. Added bound check for data index in ESPTouch v1 HT40
3. prevent buffer overflow when parsing MBSSID beacon
Lock take called esp_timer_get_time() before trying the spinlock, and the
C3 default timestamp went through esp_timer's tick-to-us conversion.
Try the lock first, and read systimer ticks directly.
(cherry picked from commit 4709507f3e)
Jiang Jiang Jian
Wang Meng Yang
Euripedes Rocha
morris
Ondrej Kosta
Island
linruihao
Marius Vikhammer
Mahavir Jain
Rahul Tank
Shreeyash Bhakare
hejiaxin
Alexey Gerenkov
zhaoweiliang
muhaidong
Guillaume Souchere
Ashish Sharma
Shu Chen
Steven (Yang Minghui)
zwx
Martin Vychodil
sonika.rathi
LiPeng
Luo Xu
zhangyanjiao
Erhan Kurubas