Delta Chat for Android does not support Android 4 anymore,
so there is no reason to keep using unsupported NDK.
r27 is the latest LTS version of Android NDK.
Tested:
- `nix build .#deltachat-rpc-server-arm64-v8a-android`
- `nix build .#deltachat-rpc-server-armv6l-linux`
`nix build .#deltachat-rpc-server-x86_64-android`
and
`nix build .#deltachat-rpc-server-x86-android`
still fail, but we do not build it in CI.
Explicit check for `-----BEGIN PGP MESSAGE-----` is unnecessary
and not sufficient to ensure that the message is valid.
We have already checked the MIME type,
so ASCII-armored OpenPGP message should be inside.
If it's not, decryption will fail anyway.
close#2338
Concat error messages when receiving new ndns.
This PR adds a newline followed by the new NDN error to the error text.
Maybe we should use something more prominent like
```
-----------------------------------------------------------------------
```
or more newlines, but I'm not sure. This maybe has to be tested on a
real device to see what works best.
3f9242a saves name from all QR codes to `name` (i.e. manually edited name), but for SecureJoin QR
codes the name should be saved to `authname` because such QR codes are generated by the
inviter. Other QR codes may be generated locally and not only by Delta Chat, so the name from them
mustn't go to `authname` and be revealed to the network or other contacts.
If the number of retries for message is exceeded,
do not fail when marking it as failed if the message does not exist.
Otherwise we may never delete the message from SMTP queue
because corresponding msg_id is not valid anymore.
The server should decode the URL and according to RFC 3986
query parameters may or may not be URL-encoded,
but at some servers don't decode the dot correctly.
`@` is decoded correctly by autoconfig.murena.io
This may indicate that there was a new \Seen flag
that we don't want to skip.
Also don't drain unsolicited responses while scanning folders. Now we
only drain unsolicited responses right before IDLE and always redo the
whole fetch cycle if there have been some. Some message in the scanned
folder may not be fetched that would be previously fetched otherwise,
but it will be picked up on the next folder scan.
Just a small refactoring. Instead of rebinding res all the time just use
`and` and `and_then`how they are inteded to be used. Improves code
readability imo.
This adds a function to `Message`:
```rust
pub fn new_text(text: String) -> Self {
Message {
viewtype: Viewtype::Text,
text,
..Default::default()
}
}
```
I keep expecting that a function like this must exist and being
surprised that it doesn't.
Open question is whether it should be `pub` or `pub(crate)` - I made it
`pub` for now because it may be useful for others and we currently we
aren't thinking about the Rust API that much, anyway, but I can make it
`pub(crate)`, too (then it can't be used in deltachat-jsonrpc and
deltachat-repl).
I replaced some usages of Message::new(Viewtype::Text), but not all yet,
I'm going to do this in a follow-up, which will remove another around 65
LOC.
Right now, when there is an SMTP connection error, the connectivity view
will always show "Error: SMTP connection failure: SMTP failed to
connect".
Instead, I just used the same method that is used in imap connect()
already.
0a63083df7 (fix: Shorten message text in locally sent messages too)
sets `msgs.mime_modified` for long outgoing messages, but forgets to save full message text.
I.e. add the "Messages are guaranteed to be end-to-end encrypted from now on." message and mark the
chat as protected again because no user action is required in this case. There are a couple of
problems though:
- If the program crashes earlier than the protection is restored, the chat remains
protection-broken. But this problem already exists because `ChatId::set_protection()` is never
retried.
- If multiple old unverified messages are received, protection messages added in between don't
annihilate, so they clutter the chat.
Let's always set `Config::NotifyAboutWrongPw` before saving configuration, better if a wrong
password notification is shown once more than not shown at all. It shouldn't be a big problem
because reconfiguration is a manual action and isn't done frequently.
Also for the same reason reset `Config::NotifyAboutWrongPw` only after a successful addition of the
appropriate device message.
Otherwise it always fails with SQLITE_READONLY:
```
WARNING src/sql.rs:769: Failed to run incremental vacuum: attempt to write a readonly database: Error code 8: Attempt to write a readonly database.
```
this PR adds a function that can be used to create any QR code, in a raw
form.
this can be used to create add-contact as well as add-second-device QR
codes (eg. `dc_create_qr_svg(dc_get_securejoin_qr())`) - as well as for
other QR codes as proxies.
the disadvantage of the rich-formatted QR codes as created by
`dc_get_securejoin_qr_svg()` and `dc_backup_provider_get_qr_svg()` were:
- they do not look good and cannot interact with UI layout wise (but
also tapping eg. an address is not easily possible)
- esp. text really looks bad. even with
[some](e5dc8fe3d8)
[hacks](https://github.com/deltachat/deltachat-android/pull/2215) it
[stays buggy](https://github.com/deltachat/deltachat-ios/issues/2200);
the bugs mainly come from different SVG implementation, all need their
own quirks
- accessibility is probably bad as well
we thought that time, SVG is a great thing for QR codes, but apart from
basic geometrics, it is not.
so, we avoid text, this also means to avoid putting an avatar in the
middle of the QR code (we can put some generic symbol there, eg.
different ones for add-contact and add-second-device).
while this looks like a degradation, also other messengers use more raw
QR codes. also, we removed many data from the QR code anyway, eg. the
email address is no longer there. that time, sharing QR images was more
a thing, meanwhile we have invite links, that are much better for that
purpose.
in theory, we could also leave the SVG path completely and go for PNG -
which we did not that time as PNG and text looks bad, as the system font
is not easily usable :) but going for PNG would add further challenges
as passing binary data around, and also UI-implemtation-wise, that would
be a larger step. so, let's stay with SVG in a form we know is
compatible.
the old QR code functions are deprecated.
this PR allows setting a "private tag" for a profile, see
https://github.com/deltachat/deltachat-android/pull/3373 for a possible
UI.
currently, the core does not do anything with the tag (so, it could also
be a ui.-config option), however, this may change in the future - it
might bet synced, and become also otherwise useful in core. also, having
this in core is better documentation-wise, as otherwise each UI easily
does its own things :)
This adds "stale-while-revalidate" in-memory cache for DNS. Instead of
calling `tokio::net::lookup_host` we use previous result of
`tokio::net::lookup_host` immediately and spawn revalidation task in the
background. This way all lookups after the first successful one return
immediately.
Most of the time results returned by resolvers are the same anyway, but
with this cache we avoid waiting 60 second timeout if DNS request is
lost. Common reason result may be different is round-robin DNS load
balancing and switching from IPv4 to IPv6 network. For round-robin DNS
we don't break load balancing but simply use a different result, and for
IPv6 we anyway likely have a result in persistent cache and can use IPv4
otherwise.
Especially frequent should be the case when you send a message over SMTP
and SMTP connection is stale (older than 60 s), so we open a new one.
With this change new connection will be set up faster as you don't need
to wait for DNS resolution, so message will be sent faster.
rust-analyzer was showing warnings here because it is always also
building in the Test configuration, and EventType has a
```rust
#[cfg(test)]
Test,
```
variant, which was not matched.
On main, when running `cargo build`, the following warning is emitted:
> warning:
/home/jonathan/deltachat-android/jni/deltachat-core-rust/deltachat-ffi/Cargo.toml:
`default-features` is ignored for deltachat, since `default-features`
was not specified for `workspace.dependencies.deltachat`, this could
become a hard error in the future
This is because when referring to a workspace dependency, it's not
possible to remove features, it's only possible to add features, so that
the `vendored` feature was always enabled with no possibility to disable
it.
This PR restores the wanted behavior of enabling vendoring by default
with the possibility to disable it with "default-features = false".
It fixes `nix build .#python-docs` by not passing
`--no-default-features` when building deltachat with nix.
If a message from an old contact's setup is received, the outdated Autocrypt header isn't applied,
so the contact verification preserves. But the chat protection breaks because the old message is
sorted to the bottom as it mustn't be sorted over the protection info message (which is `InNoticed`
moreover). Would be nice to preserve the chat protection too e.g. add a "protection broken" message,
then the old message and then a new "protection enabled" message, but let's record the current
behaviour first.
To avoid reordering, wait for "member removed" message
to be received before sending "member added".
The test failed at least once
because email server may reorder the messages internally
while delivering.
Otherwise instead of "old address"
ac2 may receive "member added",
resulting in this failure:
```
> assert msg_in_1.text == msg_out.text
E AssertionError: assert 'Member Me (c...hat.computer.' == 'old address'
E - old address
E + Member Me (ci-hfpxxe@***) added by ci-8e7mkr@***.
```
This ensures we do not get stuck trying DNS resolver results
when we have a known to work IP address in the cache
and DNS resolver returns garbage
either because it is a captive portal
or if it maliciously wants to get us stuck
trying a long list of unresponsive IP addresses.
This also limits the number of results we try to 10 overall.
If there are more results, we will retry later
with new resolution results.
It is impossible to set no display name anyway
in Delta Chat Android at least
because we don't want email addresses
in the UI.
This test does not work with long domains
that may get wrapped, so better remove it
instead of trying to prevent wrapping of domains.
Received messages shouldn't mingle with just sent ones and appear somewhere in the middle of the
chat, so we go after the newest non fresh message.
But if a received outgoing message is older than some `InSeen` message, better sort the received
message purely by timestamp (this is an heuristic in order not to break the Gmail-like case
simulated by `verified_chats::test_old_message_4()`). We could place the received message just
before that `InSeen` message, but anyway the user may not notice it.
At least this fixes outgoing messages sorting for shared accounts where messages from other devices
should be sorted the same way as incoming ones.
Otherwise backups exported from the current core and imported in versions < 1.144.0 have QR codes
not working. The breaking change which removed the column is
5a6efdff44.
Before file extensions were also limited to 32 chars, but extra chars in the beginning were just cut
off, e.g. "file.with_lots_of_characters_behind_point_and_double_ending.tar.gz" was considered to
have an extension "d_point_and_double_ending.tar.gz". Better to take only "tar.gz" then.
Also don't include whitespace-containing parts in extensions. File extensions generally don't
contain whitespaces.
There is already code below that emits
progress 0 or 1000 depending on whether
configuration succeeded or failed.
Before this change cancelling resulted
in progress 0 emitted,
immediately followed by progress 1000.
Before this change progress bar only started
when database is already transferred.
Database is usually the largest file
in the whole transfer, so the transfer appears
to be stuck for the sender.
With this change progress bar
starts for backup export
as soon as connection is received
and counts bytes transferred over the connection
using AsyncWrite wrapper.
Similarly for backup import,
AsyncRead wrapper counts the bytes
received and emits progress events.
Instead of treating NULL type error
as absence of the row,
handle NULL values with SQL.
Previously we sometimes
accidentally treated a single column
being NULL as the lack of the whole row.
The "Cannot establish guaranteed end-to-end encryption with ..." info
message can have lots of causes, and it happened twice to us now that it
took us some time to figure out which one it is.
So, include some more detail in the info message by simply adding the
non-translated error message in parantheses.
If we want to put in some more effort for nicer error messages, we
could:
- Introduce one new translated string "Cannot establish guaranteed
end-to-end encryption with …. Cause: %2$s" or similar (and remove the
old stock string)
- And/Or: Introduce new translated strings for all the possible errors
- And/Or: Maybe reword it in order to account better for the case that
the chat already is marked as g-e2ee, or use a different wording
(because if the chat is marked as g-e2ee then it might be nice to notify
the user that something may have gone wrong, but it's still working,
just that maybe the other side doesn't have us verified now)
Info messages are added
at the beginning of unpromoted group chats
("Others will only see this group after you sent a first message."),
may be created by WebXDC etc.
They are not sent outside
and have local Message-ID that
is not known to other recipients
so they should be skipped when constructing
In-Reply-To and References.
Without this fix IMAP loop may get stuck
trying to download non-existing message over and over
like this:
```
src/imap.rs:372: Logging into IMAP server with LOGIN.
src/imap.rs:388: Successfully logged into IMAP server
src/scheduler.rs:361: Failed to download message Msg#3467: Message Msg#3467 does not exist.
src/scheduler.rs:418: Failed fetch_idle: Failed to download messages: Message Msg#3467 does not exist
```
The whole download operation fails
due to attempt to set the state of non-existing message
to "failed". Now download of the message
will "succeed" if the message does not exist
and we don't try to set its state.
HTTPS requests are used to fetch
remote images in HTML emails,
to fetch autoconfig XML,
to POST requests for `DCACCOUNT:` QR codes
to make OAuth 2 API requests
and to connect to HTTPS proxies.
Rustls is more aggressive than OpenSSL
in deprecating cryptographic algorithms
so we cannot use it for IMAP and SMTP
to avoid breaking compatibility,
but for HTTPS requests listed
above this should not result in problems.
As HTTPS requests use only strict TLS checks,
there is no `strict_tls` argument
in `wrap_rustls` function.
Rustls is already used by iroh,
so this change does not introduce new dependencies.
This should fix ad-hoc groups splitting when messages are fetched out of order from different
folders or otherwise reordered, or some messages are missing so that the messages reference chain is
broken, or a member was removed from the thread and readded later, etc. Even if this way two
different threads are merged, it looks acceptable, having many threads with the same name/subject
and members isn't a common use case.
Instead of generating 72 random bits
and reducing them to 66 bits of Base64 characters,
generate 144 bits (18 bytes)
which is exactly 24 Base64 characters.
This should still be accepted by existing
Delta Chat clients which expect group ID
to be between 11 and 32 characters.
Message-ID creation is also simplified
to not have `Mr.` prefix
and dot in between two IDs.
Now it is a single ID followed by `@localhost`.
Some outdated documentation comments
are removed, e.g. group messages
don't start with `Gr.` already.
The greeting is now always read manually,
even for STARTTLS connections,
so the errors returned on failure to read form the stream
are the same regardless of the connection type.
Why:
- With IMAP APPEND we can upload messages directly to the DeltaChat folder (for non-chatmail
accounts).
- We can set the `\Seen` flag immediately so that if the user has other MUA, it doesn't alert about
a new message if it's just a sync message (there were several such reports on the support
forum). Though this also isn't useful for chatmail.
- We don't need SMTP envelope and overall remove some overhead on processing sync messages.
If a displayname equals to the address, adding it looks excessive.
Moreover, it's not useful for Delta Chat receiving the message because
`sanitize_name_and_addr()` removes such a displayname anyway. Also now
at least DC Android requires specifying profile name, so there should be
a fallback for users having meaningful addresses to keep the old
behaviour when Core generates `From` w/o the profile name, and this
question has already appeared on the forum.
This reverts commit 1caf672904.
Otherwise public key signature is regenerated each time the key is
loaded and test `key::tests::test_load_self_existing` which loads the
key twice fails when two loads happen on different seconds.
Closes#5976
Groups promotion to other devices and QR code tokens synchronisation are not synchronised processes,
so there are reasons why a QR code token may arrive earlier than the first group message:
- We are going to upload sync messages via IMAP while group messages are sent by SMTP.
- If sync messages go to the mvbox, they can be fetched earlier than group messages from Inbox.
`chat::create_send_msg_jobs()` already handles `Config::BccSelf` as needed. The only exception is
Autocrypt setup messages. This change unifies the logic for the self-chat and groups only containing
`SELF`.
This makes possible to schedule one more sending of the message, the existing jobs are not
cancelled. Otherwise it's complicated to implement bots that resend messages when a new member joins
the group.
This change removes OAuth2 for Gmail
as Delta Chat does not have a working
client ID anymore.
Tests are adjusted to test against Yandex
and MX queries for OAuth2 are always disabled
because they were only used to detect Google Workspace.
This change introduces new config options
`proxy_enabled` and `proxy_url`
that replace `socks5_*`.
Tested with deltachat-repl
by starting it with
`cargo run --locked -p deltachat-repl -- deltachat-db` and running
```
> set proxy_enabled 1
> set proxy_url ss://...
> setqr dcaccount:https://chatmail.example.org/new
> configure
```
And also:
- Make it `pub(crate)`.
- Use it in `should_request_mdns()` as using `config_exists()` there isn't correct because the
latter doesn't look at environment.
I.e. treat `DeleteServerAfter == None` as "delete at once". But when a backup is exported, set
`DeleteServerAfter` to 0 so that the server decides when to delete messages, in order not to break
the multi-device case. Even if a backup is not aimed for deploying more devices, `DeleteServerAfter`
must be set to 0, otherwise the backup is half-useful because after a restoration the user wouldn't
see new messages deleted by the device after the backup was done. But if the user explicitly set
`DeleteServerAfter`, don't change it when exporting a backup. Anyway even for non-chatmail case the
app should warn the user before a backup export if they have `DeleteServerAfter` enabled.
Also do the same after a backup import. While this isn't reliable as we can crash in between, this
is a problem only for old backups, new backups already have `DeleteServerAfter` set if necessary.
---------
Co-authored-by: Hocuri <hocuri@gmx.de>
There are providers in the provider database
that do not have servers specified.
For such providers default list should be tried
just like when configuring unknown providers.
Documentation comment says forward and backward verification is set,
but the code was not doing it.
`vc-contact-confirm` and `vg-member-added` messages
indicate that other device finished securejoin protocol
so we know Bob has our key marked as verified.
bcc_self has been enabled by default
since core version 1.95.0
by merging
PR <https://github.com/deltachat/deltachat-core-rust/pull/3612>.
However deltachat.h documentation
still incorrectly said that bcc_self is disabled by default.
This change replaces
usage of `reqwest` and `hyper-util`
with custom connection establishment code
so it is done in the same way
as for IMAP and SMTP connections.
This way we control HTTP, IMAP and SMTP
connection establishment
and schedule connection attempts
to resolved IP addresses
in the same way for all 3 protocols.
With current implementation
every time connection fails
we take the next delay from `delays` iterator.
In the worst case first 4 DNS results
immediately refuse connection
and we start fifth connection attempt
with 1 year timeout,
effectively continuing all remaining
connection attempts without concurrency.
With new implementation
new connection attempts are
added to `connection_attempt_set`
independently of connection failures
and after 10 seconds
we always end up with five
parallel connection attempts
as long as there are enough IP addresses.
Previously for each connection candidate (essentially host and port
pair) after resolving the host to a list of IPs Delta Chat iterated IP
addresses one by one. Now for IMAP and SMTP we try up to 5 IP addresses
in parallel. We start with one connection and add more connections
later. If some connection fails, e.g. we try to connect to IPv6 on IPv4
network and get "Network is unreachable" (ENETUNREACH) error, we replace
failed connection with another one immediately.
Co-authored-by: Hocuri <hocuri@gmx.de>
This ensures we don't add multiple Auto-Submitted headers
when bots send vg-request or vc-request messages.
The change fixes failing
receive_imf::tests::test_bot_accepts_another_group_after_qr_scan
test.
This fixes the bug that sometimes made QR scans fail.
The problem was:
When sorting headers into unprotected/hidden/protected, the From: header
was added twice for all messages: Once into unprotected_headers and once
into protected_headers. For messages that are `is_encrypted && verified
|| is_securejoin_message`, the display name is removed before pushing it
into unprotected_headers.
Later, duplicate headers are removed from unprotected_headers right
before prepending unprotected_headers to the message. But since the
unencrypted From: header got modified a bit when removing the display
name, it's not exactly the same anymore, so it's not removed from
unprotected_headers and consequently added again.
I.e. to all messages except "v{c,g}-request" as they sent out on a QR code scanning which is a
manual action and "vg-member-added" as formally this message is auto-submitted, but the member
addition is a result of an explicit user action. Otherwise it would be strange to have the
Auto-Submitted header in "member-added" messages of verified groups only.
Before the fix HTTP client
had no connection timeout,
so it only had a chance
to test one IPv6 and one IPv4
address if the first addresses timed out.
Now it can test at least 4 addresses
of each family and more if some addresses
refuse connection rather than time out.
Otherwise if DNS server returns incorrect results,
we may never try preloaded DNS results.
For example, we may get our first results
from a captive portal.
To test, add `127.0.0.1 example.org`
and try to create an account.
Without this change we only try 127.0.0.1 and fail.
With this change preloaded DNS results are tried as well.
this PR adds the type DC_QR_SOCKS5_PROXY to `dc_check_qr()` for
**supporting telegram proxy QR codes**. if returned, the UI should ask
the user if they want to us the proxy and call
`dc_set_config_from_qr();` afterwards (plus maybe `dc_configure()`).
idea is to improve our proxy story, follow ups may be:
- in UI, - move proxy out of "Account & Password", as a **separate
"Proxy Activity"** (it should stay in "Advanced" for now, however, below
"Server", which might be moved up)
- allow **opening the "Proxy Activity" from the welcome screens**
three-dot-menu (that would also solve a long standing issue that
entering the email address bypasses the proxy
- show proxy usage in the "Connectivity View" and/or add an **icon** to
the main chatlist screen (beside three-dot menu) in case some proxy is
in use; tapping this icon will open the "Proxy Activity"
- the the new "Proxy Activity", add a **share / show proxy QR code**
button. that would generate invite links in the form
`https://i.delta.chat/socks#...` - so that tapping then opens the app.
support for these links need to be added to core then.
- handle a list of proxies in core, offer selection in UI. the list
could be one for all profiles and could be filled eg. by normal invite
links or other channels
---------
Co-authored-by: iequidoo <117991069+iequidoo@users.noreply.github.com>
Fix a typo in the config name
(by using `Config::` to avoid it)
and make sure we don't panic on unknown values.
Also test that we don't panic on unknown
`configured_imap_certificate_checks` values.
Apparently some providers fail TLS connection
with "no_application_protocol" alert
even when requesting "imap" protocol for IMAP connection
and "smtp" protocol for SMTP connection.
Fixes <https://github.com/deltachat/deltachat-core-rust/issues/5892>.
configured_imap_certificate_checks=0 means
accept invalid certificates unless provider database
says otherwise or SOCKS5 is enabled.
It should not be saved into the database anymore.
This bug was introduced in
<https://github.com/deltachat/deltachat-core-rust/pull/5854>
(commit 6b4532a08e)
and affects released core 1.142.4, 1.142.5 and 1.142.6.
Fix reverts faulty fix from
<https://github.com/deltachat/deltachat-core-rust/pull/5886>
(commit a268946f8d)
which changed the way configured_imap_certificate_checks=0
is interpreted and introduced problems
for existing setups with configured_imap_certificate_checks=0:
<https://github.com/deltachat/deltachat-core-rust/issues/5889>.
Existing test from previous fix is not reverted
and still applies.
Regression test is added to check that
configured_imap_certificate_checks
is not "0" for new accounts.
If user has not set any settings manually
and provider is not configured,
default to strict TLS checks.
Bug was introduced in
<https://github.com/deltachat/deltachat-core-rust/pull/5854>
(commit 6b4532a08e)
and affects released core 1.142.4 and 1.142.5.
The problem only affects accounts configured
using these core versions with provider
not in the provider database or when using advanced settings.
`imap::Session::store_seen_flags_on_imap()` handles messages from multiple folders, so not being
able to select one folder mustn't fail the whole function.
`cargo install` ignores lockfile by default.
Without lockfile current build fails
due to iroh-net 0.21.0 depending on `derive_more` 1.0.0-beta.6
but failing to compile with `derive_more` 1.0.0.-beta.7.
This particular error will be fixed by upgrading to iroh 0.22.0,
but using lockfile will avoid similar problems in the future.
- To avoid receiving undecryptable MDNs by bots and replying to them if the bot's key changes.
- MDNs from bots don't look useful in general, usually the user expects some reply from the bot, not
just that the message is read.
Recently there are many questions on the Delta Chat forum why some unexpected encrypted messages
appear in Inbox. Seems they are mainly sync messages, though that also obviously happens to
SecureJoin messages. Anyway, regardless of the `MvboxMove` setting, auto-generated outgoing messages
should be moved to the DeltaChat folder so as not to complicate co-using Delta Chat with other MUAs.
Otherwise cargo emits these warnings:
warning: .../deltachat-core-rust/deltachat-ffi/Cargo.toml: `default-features` is ignored for deltachat, since `default-features` was not specified for `workspace.dependencies.deltachat`, this could become a hard error in the future
warning: .../deltachat-core-rust/deltachat-rpc-server/Cargo.toml: `default-features` is ignored for deltachat, since `default-features` was not specified for `workspace.dependencies.deltachat`, this could become a hard error in the future
warning: .../deltachat-core-rust/deltachat-rpc-server/Cargo.toml: `default-features` is ignored for deltachat-jsonrpc, since `default-features` was not specified for `workspace.dependencies.deltachat-jsonrpc`, this could become a hard error in the future
Previously Delta Chat tried to use local part of email address as well.
This configuration is very uncommon,
but trying it doubled the time of configuration try
in the worst case, e.g. when the password is typed in incorrectly.
Single function smtp::connect::connect_stream
returns a stream of a single `dyn` type
that can be a TLS, STARTTLS or plaintext
connection established over SOCKS5 or directly.
This way we can't get an account with missing blobs if there's not enough disk space.
Also delete already unpacked files if all files weren't unpacked successfully. Still, there are some
minor problems remaining:
- If a db wasn't imported successfully, unpacked blobs aren't deleted because we don't know at which
step the import failed and whether the db will reference the blobs after restart.
- If `delete_and_reset_all_device_msgs()` fails, the whole `import_backup()` fails also, but after a
restart delete_and_reset_all_device_msgs() isn't retried. Probably errors from it should be
ignored at all.
Previously Delta Chat tried all DNS resolution results
in sequence until TCP connection is established successfully,
then tried to establish TLS on top of the TCP connection.
If establishing TLS fails, the whole
connection establishment procedure failed
without trying next DNS resolution results.
In particular, in a scenario
where DNS returns incorrect result
pointing e.g. to a server
that listens on the TCP port
but does not have correpsponding TLS certificate,
Delta Chat now will fall back to the cached result
and connect successfully.
while adapting strings for the recent change about read receipts,
https://github.com/deltachat/deltachat-core-rust/pull/5712 , it turns
out in discussions eg. at
https://github.com/deltachat/deltachat-android/issues/3179 that
untranslated english for the read receipts seem to be sufficient or even
better:
- do not reveal the sender's language
- unexpected languages are confusing - even if you chat in english, you
may get Chinese read receipts
- many clients do not show the text anyways, iirc, eg. Outlook display
the read receipts in context, and Delta Chat of course as well
- afaik, we're leaving comparable `multipart/report` untranslated as
well (sync, but also webxdc updates are practically english only)
- less code, fewer translations needed :)
There are many reasons why we may fail to find valid signatures in a message, e.g. we don't yet know
a public key attached in the same message, anyway, if From is forged, the message must be rejected.
Also always take the displayname from encrypted From, even if no valid signatures are found.
This is a hint for apps that a WebXDC icon should be shown in the summary, e.g. in the
chatlist. Otherwise it's not clear when it should be shown, e.g. it shouldn't be shown in a reaction
summary.
For hardcoded built-in DNS results
there is no cache entry in `dns_cache` table
so they cannot be prioritized if DNS resolution
never returned these results yet.
If there is no entry, a new one should be created.
SQL UPSERT does this.
Follow-up to 3cf78749df "Emit DC_EVENT_MSGS_CHANGED for
DC_CHAT_ID_ARCHIVED_LINK when the number of archived chats with unread messages increases (#3940)".
In general we don't want to make an extra db query to know if a noticied chat is
archived. Emitting events should be cheap, better to allow false-positive `MsgsChanged` events.
`Context::send_sync_msg()` mustn't be called from multiple tasks in parallel to avoid sending the
same sync items twice because sync items are removed from the db only after successful
sending. Let's guarantee this by calling `send_sync_msg()` only from the SMTP loop. Before
`send_sync_msg()` could be called in parallel from the SMTP loop and another task doing
e.g. `chat::sync()` which led to `test_multidevice_sync_chat` being flaky because of events
triggered by duplicated sync messages.
New protocol streams .tar into iroh-net
stream without traversing all the files first.
Reception over old backup protocol
is still supported to allow
transferring backups from old devices
to new ones, but not vice versa.
The "Chat-Group-Member-Removed" header is added to ad-hoc group messages as well, so we should check
for its presense before creating an ad-hoc group as we do for DC-style groups.
Before, update sending might be delayed due to rate limits and later merged into large
messages. This is undesirable for apps that want to send large files over WebXDC updates because the
message with aggregated update may be too large for actual sending and hit the provider limit or
require multiple attempts on a flaky SMTP connection.
So, don't aggregate updates if the size of an aggregated update will exceed the limit of 100
KiB. This is a soft limit, so it may be exceeded if a single update is larger and it limits only the
update JSON size, so the message with all envelopes still may be larger. Also the limit may be
exceeded when updates are sent together with the WebXDC instance when resending it as the instance
size isn't accounted to not complicate the code. At least this is not worse than the previous
behaviour when all updates were attached.
Bridge bots like matterdelta need to set a quoted text without referencing the quoted message, this
makes easier bridging messages from other platforms to Delta Chat or even bridging Delta Chat groups
in different accounts where you can not set a quoted message by the message id from another account.
Even though SMTP ALPN is not officially registered (unlike IMAP),
it is an obvious choice that will allow
to multiplex SMTP and other protocols on the same TLS port.
Newer node-gyp uses newer gyp
which requires newer python
that is not available in Debian 10
container that is
used for building node prebuilds
with old glibc.
Follow-up to 5fa7cff46. Let's still not send a sync message if the contact wasn't modified. This is
not very important, but just for consistency with the `chat::rename_ex()` behaviour.
This way it's clearer which key is which and also adding the key fingerprint to the file name avoids
overwriting another previously exported key. I think this is better than adding an incremental
number as we do for backups, there's no need to export a key several times to different files.
For purposes of building a message it's better to consider the self-chat as verified. Particularly,
this removes unencrypted name from the "From" header.
If currently there are no multi-device bots, let's disable sync messages for bots at all. Another
option is to auto-disable sync messages when `Config::Bot` is set, so sync messages can be reenabled
if needed. But let's leave this option for the future.
About the first TODO: I tried this out, but it didn't actually improve
things, for two reasons:
1. The trick with `#![cfg_attr(not(test),
warn(clippy::indexing_slicing))]` that enables the lint everywhere
except for tests doesn't work with workspace-wide lints. (Context: We
want to lint against indexing because it might panic, but in a test
panicking is fine, so we don't want to enable the lint in tests).
2. Most of our crates have different sets of lints right now, so it
would only be very few crates that use the workspace-wide list of lints.
About the second TODO:
It's not feasible right now to fully parse vCards, and for our
good-enough parser the current behavior is fine, I think. If we fail to
parse some realworld vCards because of this, we can still improve it.
Notification server uses APNS server
for heartbeat notifications,
so registering FCM tokens there
will result in failing to notify them
and unregistering them anyway.
It's possible that when rebasing a PR adding a migration a merge-conflict doesn't occur if another
migration was added in the target branch. Better to have at least runtime checks that the migration
version is correct. Looks like compile-time checks are not possible because Rust doesn't allow to
redefine constants, only vars.
Instead of constructing lists of protected,
unprotected and hidden headers,
construct a single list of headers
and then sort them into separate lists
based on the well-defined policy.
This also fixes the bug
where Subject was not present in the IMF header
for signed-only messages.
Closes#5713
Bot processes are run asynchronously, so we shouldn't send messages to a bot before it's fully
initialised and skipped existing messages for processing, i.e. before DC_EVENT_IMAP_INBOX_IDLE is
emitted.
we're always checking the configuration encrypted.
saying it is 'preferred' encrypted is misleading,
therfore, just remove it.
i do not think, it is worth saying that we do not query 'http',
this is clear from the source code.
moreover, fix two typos.
Looks like it has no sense to send any profile data (From/To names, self-status; self-avatar was
never sent even before) in MDNs, they aren't normal messages and aren't seen in a MUA. Better not to
reveal profile data to the network and even to contacts in MDNs and make them more lightweight.
Follow-up to b771311593. Since that commit names are not revealed in
verified chats, but during verification (i.e. SecureJoin) they are still sent unencrypted. Moreover,
all profile data mustn't be sent even encrypted before the contact verification, i.e. before
"v{c,g}-request-with-auth". That was done for the selfavatar in
304e902fce, now it's done for From/To names and the self-status as
well. Moreover, "v{c,g}-request" and "v{c,g}-auth-required" messages are deleted right after
processing, so other devices won't see the received profile data anyway.
Probably sync messages generated for a not yet configured account are useless because there are no
other devices yet. And even if this is not true, we don't want to depend on the order of setting
`Config::SyncMsgs` and other keys. Also w/o this the Python tests don't work if we start syncing
`Config::MvboxMove` because they don't expect that sync messages are sent while configuring
accounts.
NB: We don't restart IO from the synchronisation code, so `MvboxMove` isn't effective immediately if
`ConfiguredMvboxFolder` is unset, but only after a reconnect to IMAP.
Before, if the user deleted a message too quickly after sending, it was deleted only locally. The
fix is to remember for tombstones that the corresponding message should be deleted on the server
too.
This is a way to prevent redownloading locally deleted messages. Otherwise if a message is deleted
quickly after sending and `bcc_self` is configured, the BCC copy is downloaded and appears as a new
message as it happens for messages sent from another device.
Delta Chat -style groups have names w/o prefixes like "Re: " even if the user is added to an already
existing group, so let's remove prefixes from ad-hoc group names too. Usually it's not very
important that the group is a classic email thread existed before, this info just eats up screen
space. Also this way a group name is likely to preserve if the first message was missed.
SQLite search with `LIKE` is case-insensitive only for ASCII chars. To make it case-insensitive for
all messages, create a new column `msgs.txt_normalized` defaulting to `NULL` (so we do not bump up
the database size in a migration) and storing lowercased/normalized text there when the row is
created/updated. When doing a search, search over `IFNULL(txt_normalized, txt)`.
Before, if `Config::FetchExistingMsgs` is set, existing messages were received with the `InSeen`
state set, but for bots they must be `InFresh` and also `IncomingMsg` events should be emitted for
them so that they are processed by bots as it happens with new messages.
Since commit c0a17df344
(PR https://github.com/deltachat/deltachat-core-rust/pull/3402)
`send_smtp_messages` returns an error
as soon as it encounters the first message it failed to send.
Since this worked like this for about 2 years
without any problems, there is no need to revert the change,
but outdated comment should be removed.
If a display name should be protected (i.e. opportunistically encrypted), only put the corresponding
address to the unprotected headers. We protect the From display name only for verified chats,
otherwise this would be incompatible with Thunderbird and K-9 who don't use display names from the
encrypted part. Still, we always protect To display names as compatibility seems less critical here.
When receiving a messge, overwrite the From display name but not the whole From field as that would
allow From forgery. For the To field we don't really care. Anyway as soon as we receive a message
from the user, the display name will be corrected.
Co-authored-by: iequidoo <dgreshilov@gmail.com>
Otherwise it's impossible to remove a member with missing key from a protected group. In the worst
case a removed member will be added back due to the group membership consistency algo.
The "I left the group" message can't be sent to a protected group if some member's key is missing,
in this case we should remain in the group. The problem should be fixed first, then the user may
retry to leave the group.
There was a comment in `fetch_existing_msgs()`: "Bots don't want those messages". If a bot doesn't
want this setting, why enable it? It's disabled by default anyway.
`IsChatmail` is set also by `inbox_fetch_idle()`, but it isn't called during `configure()`. Setting
`IsChatmail` from `inbox_fetch_idle()` is necessary to handle client/server upgrades, but
`IsChatmail` also should be available for the app after configuring an account, e.g. DC Android
needs it to know whether to ask the user to disable battery optimisations.
Before this fix LogSink was dropped immediately,
resulting in no logs printed for contexts created using
TextContext::new_alice(), but printed for contexts created
using TextContext::new().
`!to_ids().is_empty()` check is needed in cases of 1:1 chat creation
because otherwise `to_id` is undefined,
but in case of outgoing group message without recipients
observed on a second device creating a group should be allowed.
Previously OpenSSL was pinned due to problems
with Zig toolchain used back then
and then not unpinned even after switching from Zig to Nix
due to <https://github.com/alexcrichton/openssl-src-rs/issues/235>.
The problem should be fixed now
and we can try to unpin OpenSSL again.
When doing an AEAP transition, we mustn't just delete the old peerstate as this would break
encryption to it. This is critical for non-verified groups -- if we can't encrypt to the old
address, we can't securely remove it from the group (to add the new one instead).
-remove `DELTA_CHAT_SKIP_PATH` environment variable
- remove version check / search for dc rpc server in $PATH
- remove `options.skipSearchInPath`
- add `options.takeVersionFromPATH`
async-broadcast returns Overflowed error once
if channel overflow happened.
Public APIs such as get_next_event JSON-RPC method
are only expecting an error if the channel is closed,
so we should not propagate overflow error outside.
In particular, Delta Chat Desktop
stop receiving events completely if an error
is returned once.
If overflow happens, we should ignore it
and try again until we get an event or an error because
the channel is closed (in case of recv())
or empty (in case of try_recv()).
If multiple headers with the same name are present,
we must take the last one.
This is the one that is DKIM-signed if
this header is DKIM-signed at all.
Ideally servers should prevent adding
more From, To and Cc headers by oversigning
them, but unfortunately it is not common
and OpenDKIM in its default configuration
does not oversign any headers.
closes#5533
adds the functions that were still missing for migration to jsonrpc (the
ones that the cffi already had, so just should be quick to review ;)
It's actually `deltachat::contact::Contact::authname` by semantics. `display_name`/`name` shouldn't
be shared, it's the name given by the user locally.
Add a function parsing a vCard file at the given path.
Co-authored-by: Hocuri <hocuri@gmx.de>
Co-authored-by: Asiel Díaz Benítez <asieldbenitez@gmail.com>
When there are no parent references,
Delta Chat inserts Message-ID into References.
Such references should be ignored
because otherwise fully downloaded message
may be assigned to the same chat as previously incorrectly assigned
partially downloaded message.
Fixes receive_imf::tests::test_create_group_with_big_msg
Chat-Group-ID always correctly identifies the chat
message was sent to, while In-Reply-To and References
may point to a message that has itself been incorrectly
assigned to a chat.
This protects Bob (the joiner) of sending unexpected-unencrypted messages during an otherwise nicely
running SecureJoin.
If things get stuck, however, we do not want to block communication -- the chat is just
opportunistic as usual, but that needs to be communicated:
1. If Bob's chat with Alice is `Unprotected` and a SecureJoin is started, then add info-message
"Establishing guaranteed end-to-end encryption, please wait..." and let `Chat::can_send()` return
`false`.
2. Once the info-message "Messages are guaranteed to be e2ee from now on" is added, let
`Chat::can_send()` return `true`.
3. If after SECUREJOIN_WAIT_TIMEOUT seconds `2.` did not happen, add another info-message "Could not
yet establish guaranteed end-to-end encryption but you may already send a message" and also let
`Chat::can_send()` return `true`.
Both `2.` and `3.` require the event `ChatModified` being sent out so that UI pick up the change wrt
`Chat::can_send()` (this is the same way how groups become updated wrt `can_send()` changes).
SECUREJOIN_WAIT_TIMEOUT should be 10-20 seconds so that we are reasonably sure that the app remains
active and receiving also on mobile devices. If the app is killed during this time then we may need
to do step 3 for any pending Bob-join chats (right now, Bob can only join one chat at a time).
`ChatId::lookup_by_contact()` returns `None` for blocked chats, so it should be only used if we need
to filter out blocked chats, e.g. when building a chatlist.
E.g. the multi-device synchronisation creates the "Saved Messages" chat as blocked, in this case the
chat icon wasn't updated before and the user avatar was displayed instead.
- [x] figgure out how to build the packages (that it installs native
optional package automatically)
- [X] Make the gluecode
- [x] expose both the lowerlevel api that desktop uses (~~send objects
and receive objects~~, getting path of rpc-server is enough)
- [X] and the higher level api needed for bots (jsonrpc client)
- [X] typescript types
- [x] automatically pick the right binary from npm or allow getting it
from env var, or give out an error (throw error)
- [x] find out how to dev locally (use local built core in dc desktop) -
there is the question of how to link the typescript client and the task
to add a search in the cargo target folder for a debug build or a
different way, find out some good flow that we can use and document for
dc desktop + locally built core development
- [x] build the packages in ci
- [x] fix that deltachat-rpc-server is not executable
postponed:
- [ ] publish from ci
- [ ] add key/token to deploy to npm
Closes#4694
## Related prs
- https://github.com/deltachat-bot/echo/pull/69
- https://github.com/deltachat/deltachat-desktop/pull/3567
---------
Co-authored-by: link2xt <link2xt@testrun.org>
this PR checks if the quotes are used in a reasonable way:
- quoted messages should be send to the same chat
- or to one-to-one chats
if the quote's chat ID is not the same than the sending chat _and_ the
sending chat is not a one-to-one chat, sending is aborted.
usually, the UIs does not allow quoting in other ways, so, this check is
only a "last defence line" to avoid leaking data in case the UI has
bugs, as recently in
https://github.com/deltachat/deltachat-android/issues/3032
@iequidoo @link2xt @adbenitez i am not 100% sure about this PR, maybe
i've overseen a reasonable usecase where other quotes make sense
---------
Co-authored-by: link2xt <link2xt@testrun.org>
Otherwise, e.g. if a message is a large GIF, but its viewtype is set to `Image` by the app, this GIF
will be recoded to JPEG to reduce its size. GIFs and other special viewtypes must be always detected
and sent as is.
Otherwise location-only messages
that should be sent every 60 seconds
are never sent because location loop
waits until the end of location streaming
and is only interrupted by location streaming
ending in other chats or being enabled in other chats.
This is similar to `test_modify_chat_disordered`,
but tests that recovery works in the simplest case
where next message is not modifying group membership.
... and fails if file already exists. The UI should open the file saving dialog, defaulting to
Downloads and original filename, when asked to save the file. After confirmation it should call
dc_msg_save_file().
This way we avoid an immediate retry if the network is not yet ready exhausting the ratelimiter's
quota of two connection attempts. Also notify the ratelimiter only after a successful connection so
that it only limits the server load, but not connection attempts.
Otherwise an error
"The encoder or decoder for Jpeg does not support the color type `Rgba8`"
is returned if image has an alpha channel.
This is caused by the recent change of JPEG encoder
in `image` crate: <https://github.com/image-rs/image/issues/2211>
This makes `EventTracker` receive events immediately
instead of being moved from event emitter to event tracker
by a task spawned from `TestContext::new_internal`.
This makes `EventTracker.clear_events` reliable
as it is guaranteed to remove all events emitted
by the time it is called rather than only events
that have been moved already.
as discussed in several chats, this PR starts making it possible to use
Webxdc as integrations to the main app. In other word: selected parts of
the main app can be integrated as Webxdc, eg. Maps [^1]
this PR contains two parts:
- draft an Webxdc Integration API
- use the Webxdc Integration API to create a Maps Integration
to be clear: a Webxdc is not part of this PR. the PR is about marking a
Webxdc being used as a Map - and core then feeds the Webxdc with
location data. from the view of the Webxdc, the normal
`sendUpdate()`/`setUpdateListener()` is used.
things are still marked as "experimental", idea is to get that in to
allow @adbenitez and @nicodh to move forward on the integrations into
android and desktop, as well as improving the maps.xdc itself.
good news is that we currently can change the protocol between Webxdc
and core at any point :)
# Webxdc Integration API
see `dc_init_webxdc_integration()` in `deltachat.h` for overview and
documentation.
rust code is mostly in `webxdc/integration.rs` that is called by other
places as needed. current [user of the API is
deltachat-ios](https://github.com/deltachat/deltachat-ios/pull/1912),
android/desktop will probably follow.
the jsonrpc part is missing and can come in another PR when things are
settled and desktop is really starting [^2] (so we won't need to do all
iterations twice :) makes also sense, when this is done by someone
actually trying that out on desktop
while the API is prepared to allow other types of integrations (photo
editor, compose tools ...) internally, we currently ignore the type. if
that gets more crazy, we probably also need a dedicated table for the
integrations and not just a single param.
# Maps Integration
rust code is mostly in `webxdc/maps_integration.rs` that is called by
`webxdc/integration.rs` as needed.
EDIT: the idea of having a split here, is that
`webxdc/maps_integration.rs` really can focus on the json part, on the
communication with the .xdc, including tests
this PR is basic implementation, enabling to move forward on
integrations on iOS, but also on desktop and android.
the current implementation allows already the following:
- global and per-chat maps
- add and display POIs
- show positions and tracks of the last 24 hours
the current maps.xdc uses leaflet, and is in some regards better than
the current android/desktop implementations (much faster, show age of
positions, fade out positions, always show names of POIs, clearer UI).
however, we are also not bound to leaflet, it can be anything
> [**screenshots of the current
state**](https://github.com/deltachat/deltachat-ios/pull/1912)
> 👆
to move forward faster and to keep this PR small, the following will go
to a subsequent PR:
- consider allowing webxdc to use a different timewindow for the
location
- delete POIs
- jsonrpc
[^1]: maps are a good example as anyways barely native (see android
app), did cause a lot of pain on many levels in the past (technically,
bureaucratically), and have a comparable simple api
[^2]: only going for jsonrpc would only make sense if large parts of
android/ios would use jsonrpc, we're not there
---------
Co-authored-by: link2xt <link2xt@testrun.org>
As trashed messages can't be loaded from the db now by `Message::load_from_db()` returning an error
for such messages, errors from `Message::load_from_db()` should be logged as warnings. If it's
really an error like a db failure, it should be logged internally.
As trashed messages can't be loaded from the db now, `get_message_by_id()` returns None in some
tests e.g. in `test_deleted_msgs_dont_reappear()`. A `PerAccount` hook shouldn't be called if so.
There's no need to load an updated message state from the db to implement `is_outgoing()` and also
this function is implicitly called in some tests where a message is already trashed and a call to
`dc_get_msg()` generates an unexpected error.
Previously test did not trigger
deletion of ephemeral messages
and worked because clear_events() did not
remove just emitted events from `send_text_msg`.
It keeps timing out with the default timeout of 2 s on macOS runners.
Also fix comment in the integration test which
said that timeout is 1 minute but sets it to 3 minutes.
Set this timeout to 5 minutes as well.
API now pretends that trashed messages don't exist.
This way callers don't have to check if loaded message
belongs to trash chat.
If message may be trashed by the time it is attempted to be loaded,
callers should use Message::load_from_db_optional.
Most changes are around receive_status_update() function
because previously it relied on loading trashed status update
messages immediately after adding them to the database.
This way nightly clippy warnings are not generated
when devshell is used.
Nighly Rust is also not cached, e.g. rust-analyzer has to be rebuilt
if version from fenix is used.
This fixes things for Gmail f.e. Before, `Imap::fetch_move_delete()` was called before looking for
Trash and returned an error because of that failing the whole `fetch_idle()` which prevented
configuring Trash in turn.
`a.clone_from(&b)` is equivalent to `a = b.clone()` in functionality,
but can be overridden to reuse the resources of a to avoid unnecessary
allocations.
When the env var CARGO_BUILD_TARGET is set, cargo will crossbuild for the given arch triplet. In this case, the targets will not be put into target/release/, but target/$CARGO_BUILD_TARGET/release/. Add this subdirectory, if neccessary.
If `delete_device_after` is configured, that period should be counted for webxdc instances from the
last status update, otherwise nothing prevents from deleting them. Use `msgs.timestamp_rcvd` to
store the last status update timestamp, it anyway isn't used for anything except displaying a
detailed message info. Also, as `ephemeral::select_expired_messages()` now also checks
`timestamp_rcvd`, we have an improvement that a message is guaranteed not to be deleted for the
`delete_device_after` period since its receipt. Before only the sort timestamp was checked which is
derived from the "sent" timestamp.
Let's add a 1-minute tolerance to `Params::MemberListTimestamp`.
This adds to the group membership consistency algo the following properties:
- If remote group membership changes were made by two members in parallel, both of them are applied,
no matter in which order the messages are received.
- If we remove a member locally, only explicit remote member additions/removals made in parallel are
allowed, but not the synchronisation of the member list from "To". Before, if somebody managed to
reply earlier than receiving our removal of a member, we added it back which doesn't look good.
This change avoids the race between
`provide_backup` changing the state from NoProvider to Pending
and a call to `get_backup_qr` or `get_backup_qr_svg`.
With this change `get_backup_qr` and `get_backup_qr_svg`
always block until QR code is available,
even if `provide_backup` was not called yet.
- Always emit `ContactsChanged` from `contact::update_last_seen()` if a contact was seen recently
just for simplicity and symmetry with `RecentlySeenLoop::run()` which also may emit several events
for single contact.
- Fix sleep time calculation in `RecentlySeenLoop::run()` -- `now` must be updated on every
iteration, before the initial value was used every time which led to progressively long sleeps.
Instead, look up the 1:1 chat in `receive_imf::add_parts()`. This is a more generic approach to fix
assigning outgoing reactions to 1:1 chats in the multi-device setup. Although currently both
approaches give the same result, this way we can even implement a "react privately"
functionality. Maybe it sounds useless, but it seems better to have less reaction-specific code.
we checked for tombstones already using `is_trash()`,
however, we've overseen that tombstones get deleted at some point :)
therefore, just do not treat loading failures of the weak msg_id as errors -
usually, they are not - and if, just the normal summary is shown.
in theory, we could check for existance explicitly before tryong load_from_db,
however, that would be additional code (and maybe another database call)
and not worth the effort.
anyways, this commit also adds an explicit test
for physical deletion after housekeeping.
use get_summary_text_without_prefix() to get raw summaries without prefixes,
this is needed for reaction summaries,
where we also do not show the name, so we do not want to show "Forwarded" as well.
shows the last reaction in chatlist's summaries if there is no
newer message.
the reason to show reactions in the summary, is to make them a _little_
more visible when one is not in the chat. esp. in not-so-chatty or in
one-to-ones chats this becomes handy: imaging a question and someone
"answers" with "thumbs up" ...
otoh, reactions are still tuned down on purpose: no notifications, chats
are opend as usual, the chatlist is not sorted by reactions and also the
date in the summary refer to the last message - i thought quite a bit
about that, this seems to be good compromise and will raise the fewest
questions. it is somehow clear to the users that reactions are not the
same as a real message. also, it is comparable easy to implement - no
UI changes required :)
all that is very close to what whatsapp is doing (figured that out by
quite some testing ... to cite @adbenitez: if in doubt, we can blame
whatsapp :)
technically, i first wanted to go for the "big solution" and add two
more columns, chat_id and timestamp, however, it seemed a bit bloated if
we really only need the last one. therefore, i just added the last
reaction information to the chat's param, which seems more performant
but also easier to code :)
`is_probably_private_reply()` checks
if a message should better go to the one to one chat
instead of the chat already identified by the `In-Reply-To`.
this functionality is needed to make "Reply Privately" work.
however, this functionality is never true for reactions.
if we would return `true` here, own reactions seen by a second device
would not get the correct chat assiged.
We update version in several .toml and .json files
on every release anyway, so updating pyproject.toml is easy.
setuptools_scm makes it more difficult to build
python packages for software distributions
because it requires full git checkout
with tags rather than just a worktree.
It is also possible to remove or move tags
after the release, so git revision no longer
pins python package version if setuptools_scm is used.
- the `jobs` table is no longer in use,
no need to track files on housekeeping,
no need to clear it from repl tool
- some `Params` were used for jobs table only,
they can be used freely for other purposes on other tables.
param 'protection settings timestamp' was never used in practise,
its code is removed as well, so we can free the Param as well.
it was used by iOS to know when a background fetch was complete;
meanwhile the superiour `dc_accounts_background_fetch()` is used for
that.
there is still the corresponding context function `dc_all_work_done()`,
this not used by any UI as well, however, it is in use by a python
tests.
not sure, what to do with it, at a first glance, the test still seems
useful.
Don't attach selfavatar in "v{c,g}-request" and "v{c,g}-auth-required" messages:
- These messages are deleted right after processing, so other devices won't see the avatar.
- It's also good for privacy because the contact isn't yet verified and these messages are auto-sent
unlike usual unencrypted messages.
the rendered time output seems different on different systems and timezomes,
eg. on my local machine, it is
`Sent: 2024.03.20 10:00:01 ` and not `Sent: 2024.03.20 09:00:01`,
maybe because of winter/summer time, idk.
as the gist of the test is to check the name,
however, i just removed the whole time check.
Do not include oldest reference, because chat members
which have been added later and have not seen the first message
do not have referenced message in the database.
Instead, include up to 3 recent Message-IDs.
If user specifies build directory, respect this
instead of building inside the target/ directory.
Also remove outdated comment about Rust 1.50.0 support.
Current MSRV is 1.70.0 and we use 2021 edition
which implies version 2 resolver.
This is a test reproducing the problem
in <https://github.com/deltachat/deltachat-core-rust/issues/5339>.
Fix would be to avoid reordering on the server side,
so the test checks that the unverified message
is replaced with a square bracket error
as expected if messages arrive in the wrong order.
Add white background instead of the default black one to avatars when recoding to JPEG. But not for
"usual" images to spare the CPU. The motivation is to handle correctly
"black-on-transparent-background" avatars which are quite common.
as turned out on recent researches wrt a slow database, setting
`save_mime_headers` will result in 25x larger databases.
this is definetely something we want to know at least in the debug info.
(the option cannot be enabled in current UIs,
however, esp. devs find options to set this.
apart from that, save_mime_headers is only used in some python tests)
ftr: the huge database was more than 10 times slower, leading to missing
notifications on ios (as things do not finish within the few seconds iOS
gave us).
moreover, the hugeness also avoids exporting; this is fixed by
https://github.com/deltachat/deltachat-core-rust/pull/5349
this PR fixes one of the issues we had with an (honestly accidentally)
huge database of >2gb.
this database could not be exported on iOS, as ram memory is limited
there, leading to the app just crashing.
it is unclear if that would be better on eg. Android, however,
temp_store=FILE is not working as well there, this is the smaller
drawback there.
before merging, this PR should be tested on time with export/import on
iOS (export/import uses VACUUM which uses /tmp) EDIT: did so, works on
iphone7 with ios15
`Param::MemberListTimestamp` was updated only from `receive_imf::apply_group_changes()` i.e. for
received messages. If we sent a message, that timestamp wasn't updated, so remote group membership
changes always overrode local ones. Especially that was a problem when a message is sent offline so
that it doesn't incorporate recent group membership changes.
When scheduler is destroyed, e.g. during a key import,
there is some time between destroying the interrupt channel
and the loop task.
To avoid busy looping, tasks should terminate if
receiving from the interrupt loop fails
instead of treating it as the interrupt.
An unencrypted message with already known Autocrypt key, but sent from another address, means that
it's rather a new contact sharing the same key than the existing one changed its address, otherwise
it would already have our key to encrypt.
If Subject is multiline-formatted, `mailparse` adds the leading whitespace to it. The solution is to
always remove the leading whitespace, because if Subject isn't multiline-formatted, it never
contains the leading whitespace anyway. But as for the trailing whitespace -- i checked -- it's
never removed, so let's keep this as is.
This fixes the following identity-misbinding attack:
It appears that Bob’s messages in the SecureJoin protocol do not properly “bind” to Alice’s public
key or fingerprint. Even though Bob’s messages carry Alice’s public key and address as a gossip in
the protected payload, Alice does not reject the message if the gossiped key is different from her
own key. As a result, Mallory could perform an identity-misbinding attack. If Mallory obtained
Alice’s QR invite code, she could change her own QR code to contain the same tokens as in Alice’s QR
code, and convince Bob to scan the modified QR code, possibly as an insider attacker. Mallory would
forward messages from Bob to Alice and craft appropriate responses for Bob on his own. In the end,
Bob would believe he is talking to Mallory, but Alice would believe she is talking to Bob.
Secure-Join-Group is only expected by old core in vg-request-with-auth.
There is no reason to leak group ID in unencrypted vg-request.
Besides that, Secure-Join-Group is deprecated
as Alice knows Group ID corresponding to the auth code,
so the header can be removed completely eventually.
If a message is sent from SELF, but signed with a foreign key, it mustn't be considered
Autocrypt-encrypted and shown with a padlock. Currently this is broken.
Compilation of vendored OpenSSL inside Nix is broken since
<https://github.com/alexcrichton/openssl-src-rs/pull/229> due to build
script changes.
There is anyway no need to compile vendored OpenSSL as nixpkgs already
contains OpenSSL package.
This fixes `nix build .#deltachat-rpc-server-x86_64-linux` and similar
commands which are used during releases.
The way it was implemented it threw out all remaining messages after finding the next incoming
message. Better use FFIEventTracker functions, they are used in all the tests anyway.
Connection establishment now happens only in one place in each IMAP loop.
Now all connection establishment happens in one place
and is limited by the ratelimit.
Backoff was removed from fake_idle
as it does not establish connections anymore.
If connection fails, fake_idle will return an error.
We then drop the connection and get back to the beginning of IMAP
loop.
Backoff may be still nice to have to delay retries
in case of constant connection failures
so we don't immediately hit ratelimit if the network is unusable
and returns immediate error on each connection attempt
(e.g. ICMP network unreachable error),
but adding backoff for connection failures is out of scope for this change.
ratelimit can be exhausted quickly if the network is not available,
i.e. if every connection attempt returns "network unreachable" error.
When the network becomes available, we want to retry connecting
as soon as maybe_network is called without waiting for ratelimiter.
Before group avatar was sent as an attachment. Let's do the same as with user avatar and send group
avatar as base64. Receiver code uses the same functions for user and chat avatars, so base64 avatars
are supported for most receivers already.
`deltachat-rpc-server` releases are built
with Nix and LLVM/clang toolchains now
that fully support atomics.
Zig toolchain that required disabling atomics
and resulted in problems with OpenSSL 3.2 releases
is not used anymore.
It was broken completely and before "fix: apply Autocrypt headers if timestamp is unchanged" that
didn't show up because the message from the second Bob's device never had "Date" greater than one
from the message sent before from the first device.
In this case connection failure
may be a connection timeout (currently 1 minute),
so it does not make sense to fake idle for another minute immediately after.
However, failure may be immediate if the port is closed
and the server refuses connection every time.
To prevent busy loop in this case
we apply ratelimit to connection attempts rather than login attempts.
This partially reverts ccec26ffa7
Even if 1:1 chat with alice is protected,
we should send vc-request unencrypted.
This happens if Alice changed the key
and QR-code Bob scans contains fingerprint
that is different from the verified fingerprint.
Sending vc-request encrypted to the old key
does not help because Alice is not able
to decrypt it in this case.
Use sync messages for that as it is done for e.g. Config::Displayname. Maybe we need to remove
self-status synchronisation via usual messages then, but let's think of it a bit.
Use sync messages for that as it is done for e.g. Config::Displayname. Maybe we need to remove
avatar synchronisation via usual messages then, but let's think of it a bit.
Encryption subkey is incorrectly referred to as public key
in variable names.
This is incorrect because generated encryption key
is secret too just as the signing primary key.
Generated OpenPGP secret key consists of primary signing key
and encryption subkey.
Then OpenPGP public key consisting of
the primary signing public key
and encryption public key is generated.
Keypair consists of the secret OpenPGP key and public OpenPGP key,
each of them has a primary key and subkey inside.
Also disable --progress.
It is not disabled by default for backward compatibility,
but solves the problem of lots of progress lines
in the downloadable raw output:
https://github.com/actions/checkout/pull/1067
The limit is better enforced by webxdc distributors,
e.g. xdc store bots or actually email providers
to allow for experimentation with large frameworks
or porting existing apps and testing them
before reducing their size.
Besides that, the comment on WEBXDC_SENDING_LIMIT was outdated,
it was not updated when the limit was increased to 640 kB.
Even if `vc-request-with-auth` is received with a delay, the protection message must have the sort
timestamp equal to the Sent timestamp of `vc-request-with-auth`, otherwise subsequent chat messages
would also have greater sort timestamps and while it doesn't affect the chat itself (because Sent
timestamps are shown to a user), it affects the chat position in the chatlist because chats there
are sorted by sort timestamps of the last messages, so the user sees chats sorted out of
order. That's what happened in #5088 where a user restores the backup made before setting up a
verified chat with their contact and fetches new messages, including `vc-request-with-auth` and also
messages from other chats, after that.
Add a new crate `deltachat_time` with a fake `struct SystemTimeTools` for mocking
`SystemTime::now()` for test purposes. One still needs to use `std::time::SystemTime` as a struct
representing a system time. I think such a minimalistic approach is ok -- even if somebody uses the
original `SystemTime::now()` instead of the mock by mistake, that could break only tests but not the
program itself. The worst thing that can happen is that tests using `SystemTime::shift()` and
checking messages timestamps f.e. wouldn't catch the corresponding bugs, but now we don't have such
tests at all which is much worse.
after merging:
6. Tag the release: `git tag -a v1.135.0`.
7. Push the release tag: `git push origin v1.135.0`.
8. Create a GitHub release: `gh release create v1.135.0 -n ''`.
---------
Co-authored-by: link2xt <link2xt@testrun.org>
PR #5099 removed some columns in the database that were actually in use.
usually, to not worsen UX unnecessarily
(releases take time - in between, "Add Second Device", "Backup" etc.
would fail), we try to avoid such schema changes (checking for
db-version would avoid import etc. but would still worse UX),
see discussion at #2294.
these are the errors, the user will be confronted with otherwise:
<img width=400
src=https://github.com/deltachat/deltachat-core-rust/assets/9800740/e3f0fd6e-a7a9-43f6-9023-0ae003985425>
it is not great to maintain the old columns, but well :)
as no official releases with newer cores are rolled out yet, i think, it
is fine to change the "107" migration
and not copy things a second time in a newer migration.
(this issue happens to me during testing, and is probably also the issue
reported by @lk108 for ubuntu-touch)
The system clock may be adjusted and even go back, so caching system time in code sections where
it's not supposed to change may even protect from races/bugs.
If a time value doesn't need to be sent to another host, saved to the db or otherwise used across
program restarts, a monotonically nondecreasing clock (`Instant`) should be used. But as `Instant`
may use `libc::clock_gettime(CLOCK_MONOTONIC)`, e.g. on Android, and does not advance while being in
deep sleep mode, get rid of `Instant` in favor of using `SystemTime`, but add `tools::Time` as an
alias for it with the appropriate comment so that it's clear why `Instant` isn't used in those
places and to protect from unwanted usages of `Instant` in the future. Also this can help to switch
to another clock impl if we find any.
Restart the IO scheduler if needed to make the new config value effective (for `MvboxMove,
OnlyFetchMvbox, SentboxWatch` currently). Also add `set_config_internal()` which doesn't affect
running the IO scheduler. The reason is that `Scheduler::start()` itself calls `set_config()`,
although not for the mentioned keys, but still, and also Rust complains about recursive async calls.
Currently when a user sets up another device by logging in, a new key is created. If a message is
sent from either device outside, it cannot be decrypted by the other device.
The message is replaced with square bracket error like this:
```
<string name="systemmsg_cannot_decrypt">This message cannot be decrypted.\n\n• It might already help to simply reply to this message and ask the sender to send the message again.\n\n• If you just re-installed Delta Chat then it is best if you re-setup Delta Chat now and choose "Add as second device" or import a backup.</string>
```
(taken from Android repo `res/values/strings.xml`)
If the message is outgoing, it does not help to "simply reply to this message". Instead, we should
add a translatable device message of a special type so UI can link to the FAQ entry about second
device. But let's limit such notifications to 1 per day. And as for the undecryptable message
itself, let it go to Trash if it can't be assigned to a chat by its references.
Before it was emitted only on the source device and `test_sync()` didn't catch the bug because of
the interference of the previous call to `set_config_bool()`. Now there's a separate test that does
its job well.
Before moving emails to the mvbox we need to remember its UIDVALIDITY, otherwise emails moved before
that wouldn't be fetched but considered "old" instead.
Also:
- Don't use `session.create()` to create mvbox as `select_with_uidvalidity()` already creates mvbox
on its own.
- Don't try to create compat folders like "INBOX.DeltaChat", but only look for them.
If `escaper::decode_html_buf_sloppy()` just truncates the text (which happens when it fails to
html-decode it at some position), then it's probably not HTML at all and should be left as
is. That's what happens with hyperlinks f.e. and there was even a test on this wrong behaviour which
is fixed now. So, now hyperlinks are not truncated in messages and should work as expected.
If a Delta Chat message has the Message-ID already existing in the db, but a greater "Date", it's a
resent message that can be deleted. Messages having the same "Date" mustn't be deleted because they
can be already seen messages moved back to INBOX. Also don't delete messages having lesser "Date" to
avoid deleting both messages in a multi-device setting.
Use `create_smeared_timestamp()` for this. This allows to dedup messages on the receiver -- if it
sees the same Message-ID, but a different timestamp, then it's a resent message that can be deleted.
"Auto-Submitted: auto-replied" messages mustn't be considered as sent by either bots or non-bots,
e.g. MDNs have this header value and it's the same for bots and non-bots.
In particular TLSRPT reports
contain files that may be interesting for admins.
Currently Delta Chat drops the attachment
so message appears as a text message without actual payload.
@adbenitez wants this feature on Deltalab to display a bot tag.
Other UIs might also want to adopt this feature :)
---------
Co-authored-by: link2xt <link2xt@testrun.org>
If we wait for inviter success,
vg-member-added message may be still in flight
and reach ac2 after device resetup.
Making ac2 wait for joining the group ensures that old
device receives vg-member-added message
and new device will not receive it and fail to decrypt.
Other instances of wait_for_securejoin_inviter_success()
in the same tests are also replaced for reliability.
Previously the message was removed from `download` table,
but message bubble was stuck in InProgress state.
Now download state is updated by the caller,
so it cannot be accidentally skipped.
This allows to send existing messages (incoming and outgoing) taken from encrypted chats, to
unencrypted ones. `Param::ForcePlaintext` is removed as well -- if a message can be sent encrypted
this time, nothing bad with this.
Currently `Chat.send_msg()` modifies the source message and returns another message object
equivalent to the source one. That's how it works in the core and thus in Python bindings too.
This is needed to protect from ESPs (such as gmx.at) doing their own Quoted-Printable encoding and
thus breaking messages and signatures. It's unlikely that the reader uses a MUA not supporting
Quoted-Printable encoding. And RFC 2646 "4.6" also recommends it for encrypted messages.
Trying non-strict TLS checks is not necessary
for most servers with proper TLS setup,
but doubles the time needed to fail configuration
when the server is not responding, e.g.
when all connection attempts time out.
There is also a risk of accidentally
configuring non-strict TLS checks in a rare case
that strict TLS check configuration spuriously failed,
e.g. on a bad network.
If the server has a known broken TLS setup,
it can still be added to the provider database
or configured with non-strict TLS check manually.
User can also configure another email provider,
such as chatmail servers, instead of using the server
with invalid TLS hostname.
This change does not affect exising setups.
deltachat.h uses `@defgroup` commands to create topics
for groups of constants. Prior to Doxygen 1.9.8
defining a group created a "module"
and all constants were visible from the modules.html page.
In Doxygen 1.9.8 "modules" were renamed into "topics"
as C++20 modules have taken their place,
so Delta Chat documentation does not have modules
in Doxygen sense anymore.
The change is to replace "modules.html" with "topics.html"
in the DoxygenLayout.xml.
See <https://www.doxygen.nl/manual/grouping.html> for
Doxygen documentation about groups and their relation to topics.
This PR stops MDNs from being forced to be sent unencrypted.
If no encryption is possible (by `should_encrypt`), the fix#5152 still
applies.
close#5168
Send `EventType::ConnectivityChanged` when using the context methods
`start_io` and `stop_io`.
close#5097
---------
Co-authored-by: Septias <scoreplayer2000@gmail.comclear>
Add an event for a case if a multi-device synced config value changed. Maybe the app needs to
refresh smth on such an event. For uniformity it is emitted on the source device too. The value is
omitted, otherwise it would be logged which might not be good for privacy.
2024-01-11 21:53:26 -03:00
240 changed files with 35225 additions and 12934 deletions
@@ -32,6 +32,66 @@ on the contributing page: <https://github.com/deltachat/deltachat-core-rust/cont
We format the code using `rustfmt`. Run `cargo fmt` prior to committing the code.
Run `scripts/clippy.sh` to check the code for common mistakes with [Clippy].
### SQL
Multi-line SQL statements should be formatted using string literals,
for example
```
sql.execute(
"CREATE TABLE messages (
id INTEGER PRIMARY KEY AUTOINCREMENT,
text TEXT DEFAULT '' NOT NULL -- message text
) STRICT",
)
.await?;
```
Do not use macros like [`concat!`](https://doc.rust-lang.org/std/macro.concat.html)
or [`indoc!](https://docs.rs/indoc).
Do not escape newlines like this:
```
sql.execute(
"CREATE TABLE messages ( \
id INTEGER PRIMARY KEY AUTOINCREMENT, \
text TEXT DEFAULT '' NOT NULL \
) STRICT",
)
.await?;
```
Escaping newlines
is prone to errors like this if space before backslash is missing:
```
"SELECT foo\
FROM bar"
```
Literal above results in `SELECT fooFROM bar` string.
This style also does not allow using `--` comments.
---
Declare new SQL tables with [`STRICT`](https://sqlite.org/stricttables.html) keyword
to make SQLite check column types.
Declare primary keys with [`AUTOINCREMENT`](https://www.sqlite.org/autoinc.html) keyword.
This avoids reuse of the row IDs and can avoid dangerous bugs
like forwarding wrong message because the message was deleted
and another message took its row ID.
Declare all new columns as `NOT NULL`
and set the `DEFAULT` value if it is optional so the column can be skipped in `INSERT` statements.
Dealing with `NULL` values both in SQL and in Rust is tricky and we try to avoid it.
If column is already declared without `NOT NULL`, use `IFNULL` function to provide default value when selecting it.
Use `HAVING COUNT(*) > 0` clause
to [prevent aggregate functions such as `MIN` and `MAX` from returning `NULL`](https://stackoverflow.com/questions/66527856/aggregate-functions-max-etc-return-null-instead-of-no-rows).
Don't delete unused columns too early, but maybe after several months/releases, unused columns are
still used by older versions, so deleting them breaks downgrading the core or importing a backup in
an older version. Also don't change the column type, consider adding a new column with another name
instead. Finally, never change column semantics, this is especially dangerous because the `STRICT`
keyword doesn't help here.
### Commit messages
Commit messages follow the [Conventional Commits] notation.
We use [git-cliff] to generate the changelog from commit messages before the release.
[^1]: Out of date / unmaintained, if you like those languages feel free to start maintaining them. If you have questions we'll help you, please ask in the issues.
* Inform that set of chats or the order of the chats in the chatlist has changed.
*
* Sometimes this is emitted together with `DC_EVENT_CHATLIST_ITEM_CHANGED`.
*/
#define DC_EVENT_CHATLIST_CHANGED 2300
/**
* Inform that all or a single chat list item changed and needs to be rerendered
* If `chat_id` is set to 0, then all currently visible chats need to be rerendered, and all not-visible items need to be cleared from cache if the UI has a cache.
*
* @param data1 (int) chat_id chat id of chatlist item to be rerendered, if chat_id = 0 all (cached & visible) items need to be rerendered
*/
#define DC_EVENT_CHATLIST_ITEM_CHANGED 2301
/**
* Inform that some events have been skipped due to event channel overflow.
*
* @param data1 (int) number of events that have been skipped
/// This means that you should refresh the connectivity view
@@ -288,19 +231,54 @@ pub enum EventType {
/// getConnectivityHtml() for details.
ConnectivityChanged,
/// Deprecated by `ConfigSynced`.
SelfavatarChanged,
/// A multi-device synced config value changed. Maybe the app needs to refresh smth. For
/// uniformity this is emitted on the source device too. The value isn't here, otherwise it
/// would be logged which might not be good for privacy.
ConfigSynced{
/// Configuration key.
key: String,
},
#[serde(rename_all = "camelCase")]
WebxdcStatusUpdate{
msg_id: u32,
status_update_serial: u32,
},
/// Data received over an ephemeral peer channel.
#[serde(rename_all = "camelCase")]
WebxdcRealtimeData{msg_id: u32,data: Vec<u8>},
/// Advertisement received over an ephemeral peer channel.
/// This can be used by bots to initiate peer-to-peer communication from their side.
#[serde(rename_all = "camelCase")]
WebxdcRealtimeAdvertisementReceived{msg_id: u32},
/// Inform that a message containing a webxdc instance has been deleted
#[serde(rename_all = "camelCase")]
WebxdcInstanceDeleted{
msg_id: u32,
},
WebxdcInstanceDeleted{msg_id: u32},
/// Tells that the Background fetch was completed (or timed out).
/// This event acts as a marker, when you reach this event you can be sure
/// that all events emitted during the background fetch were processed.
///
/// This event is only emitted by the account manager
AccountsBackgroundFetchDone,
/// Inform that set of chats or the order of the chats in the chatlist has changed.
///
/// Sometimes this is emitted together with `UIChatlistItemChanged`.
ChatlistChanged,
/// Inform that a single chat list item changed and needs to be rerendered.
/// If `chat_id` is set to None, then all currently visible chats need to be rerendered, and all not-visible items need to be cleared from cache if the UI has a cache.
#[serde(rename_all = "camelCase")]
ChatlistItemChanged{chat_id: Option<u32>},
/// Inform than some events have been skipped due to event channel overflow.
EventChannelOverflow{n: u64},
}
implFrom<CoreEventType>forEventType{
@@ -332,13 +310,20 @@ impl From<CoreEventType> for EventType {
- Then pass it as an artifact to the last CI action that publishes the main package.
- upload all packages from `deltachat-rpc-server/npm-package/platform_package`.
- then publish `deltachat-rpc-server/npm-package`,
- this will run `update_optional_dependencies_and_version.js` (in the `prepack` script),
which puts all platform packages into `optionalDependencies` and updates the `version` in `package.json`
## How to build a version you can use localy on your host machine for development
You can not install the npm packet from the previous section locally, unless you have a local npm registry set up where you upload it too. This is why we have seperate scripts for making it work for local installation.
- If you just need your host platform run `python scripts/make_local_dev_version.py`
- note: this clears the `platform_package` folder
- (advanced) If you need more than one platform for local install you can just run `node scripts/update_optional_dependencies_and_version.js` after building multiple plaftorms with `build_platform_package.py`
## Thanks to nlnet
The initial work on this package was funded by nlnet as part of the [Delta Tauri](https://nlnet.nl/project/DeltaTauri/) Project.
File diff suppressed because it is too large
Load Diff
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
