refactor(parlio_rx): use gdma_link for better gdma link management
Closes IDF-13369, IDF-13627, and IDFGH-16449
See merge request espressif/esp-idf!40743
feat(openthread): optimize fail cases in CI test
Closes IDFCI-2537, IDFCI-2642, IDFCI-3576, IDFCI-3623, IDFCI-3955, IDFCI-5136, IDFCI-5072, IDFCI-5065, IDFCI-4997, IDFCI-3026, IDFCI-3019, and IDFCI-3020
See merge request espressif/esp-idf!42971
Currently, the toolchain CMake files use the remove_duplicated_flags
function from utilities.cmake. The cmakev2 implementation also includes
this function for backward compatibility. Move the
remove_duplicated_flags function to a separate file,
deduplicate_flags.cmake, so it can be shared between cmakev1 and
cmakev2.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Enable check-kconfig-files. It was temporarily disabled because it was
not possible to add a new sourced file through an environment variable,
as kconfcheck had a fixed list of allowed environment variable names.
This issue should now be resolved.
Currently, the buildv2 tests are initiated using the same patterns as
the tests for the current build system. This means that any change in
the current build system will also trigger the buildv2 tests. Initially,
it might be wise not to block the CI for changes in the current build
system in case there is an issue with buildv2. Therefore, let's
explicitly start the buildv2 tests only when the buildv2 label is set.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
The esp_libc relies on the stdio implementation of the vfs component if
CONFIG_VFS_SUPPORT_IO is enabled. This is not an issue in cmakev1
because if the vfs component is not included in the project build, its
configuration is not available, and CONFIG_VFS_SUPPORT_IO is not set.
However, in cmakev2, the configuration for all components is available,
and the presence of some component configuration options does not
necessarily mean that the component is included in the project build.
When esp_libc is compiled without the vfs dependency but with
CONFIG_VFS_SUPPORT_IO enabled, the libc initialization will encounter a
panic due to a NULL pointer dereference (fp->_flags) in __swsetup_r, as
fopen in esp_libc_init_global_stdio will return NULL.
Although the current documentation exposes only limited functionality,
which is unlikely to change, add an explicit note that the build system
v2 is currently a technical preview intended for testing and early
evaluation.
Ensure consistency in referring to v2 throughout the documentation. In
some places, it is referred to as V2 or Version 2; unify this to v2.
Additionally, update the hello_world example for v2 to use the
idf::spi_flash alias instead of the interface variable to maintain
consistency with the rest of the documentation.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Extend the current documentation to recommend using the
idf_component_register function as the preferred method for creating a
new component for v2.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Using idf_component_register is the preferred method for creating new
components for cmakev2. This approach ensures compatibility with both
versions of the build system. The KCONFIG and KCONFIG_PROJBUILD options
have been removed from the API documentation, but are retained in code
in case a cmakev1 component uses these options to warn about
incompatibility. Also remove a note about `project_include.cmake`,
because cmakev2 includes all project_include files.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Enhance the `esp_target_info` component example by adding some of
the missing features that the component might require. This includes
adding a linker script, a linker fragment, linking the component archive
as a whole library, and providing an example of how the linker options
can be set.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Components designed exclusively for cmakev2 are not compatible with
cmakev1 due to the lack of forward compatibility. It is important to
clarify this at the very beginning of the `Creating a New Component`
section. Additionally recommended a guidance on how to create a
component that will be compatible with both versions.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Currently, the archive file name is set only in the cmakev1
idf_component_register shim. The predictable component archive file name
is important, for example, for usage in linker fragments. Ensure that
the cmakev2 component also has the archive file name set.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Currently, when the cmakev2 component sources are set, the SRCS target
property is used. This is obviously wrong because the correct CMake
property is SOURCES.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Rename the LINKER_SCRIPTS_STATIC component property to LINKER_SCRIPTS.
This property stores linker scripts that are not processed by ldgen,
which essentially includes all of them. The only linker script processed
by ldgen is sections.ld, which is handled by the esp_system component.
This implies that there is likely no practical use case for other
components to utilize ldgen processed linker scripts. This change is
purely cosmetic to allow components to add linker scripts with:
idf_component_set_property(${COMPONENT_TARGET} LINKER_SCRIPTS linker_script.ld APPEND)
instead of
idf_component_set_property(${COMPONENT_TARGET} LINKER_SCRIPTS_STATIC linker_script.ld APPEND)
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Add very basic documentation. It is currently written with the
expectation that the reader is already familiar with the existing build
system and focuses more on the changes that might be necessary to adapt
existing components to work with cmakev2. Additionally, it provides
basic information on how to create a new component and project.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Currently, we include numerous functions in the automatically generated
documentation for the build system API. Let's begin with only the
essential functions and gradually add more to the API based on requests
and actual needs.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
This commit adds a workaround in idf_build_component shim to avoid
initialization of a duplicate managed component. The component manager
when running on a Windows system returns duplicate managed components
upon successive invocations.
The current approach involves wrapping the library target within the
library interface target with the whole-archive flags, such as for the
GCC linker. However, this does not work as expected because the library
target is expanded, and the whole-archive flags are also applied to
other library targets that the wrapped library target depends on. IOW
the whole-archive flags surround multiple archives, not just the one
requrested. Generally, using linker flags like whole-archive in the
library INTERFACE(INTERFACE_LINK_LIBRARIES) does not seem to work as
CMake may perform deduplication and rearrange the flags [1].
The proof of concept used `CMAKE_LINK_LIBRARY_USING_<FEATURE>` with the
WHOLE_ARCHIVE feature, which was introduced in CMake 3.24 to specify how
the library target should be linked. There are two issues with this.
First, this feature is only available from CMake 3.24 onwards, while our
minimum CMake version is set to 3.22. More importantly, all occurrences
of a library on the link line are wrapped. For example, if a library
like `vfs` appears multiple times on the link line due to dependencies,
each occurrence will be wrapped with whole-archive, causing the linker
to complain about multiple symbol definitions. Therefore, even though
WHOLE_ARCHIVE is recommended for handling whole-archive linkage, it does
not seem suitable for our purposes. This was overlooked in the PoC
because only a simple testing component was used to check the
WHOLE_ARCHIVE behavior.
One way to address this issue is to adopt the same approach used in
cmakev1, which involves specifying the whole-archive flags when linking
component library targets to the final executable. In this case, CMake
retains the flags without any alteration, unlike when the flags are
specified in INTERFACE_LINK_LIBRARIES for the component interface
targets. While this approach is feasible, it would alter the current
logic, where we have a single library interface for the entire idf
library that can be linked to the executable. This change would also
complicate the direct use of the idf library, as it would no longer be
possible to simply link it to the executable. Instead, the executable
would need to correctly link the component libraries with the
whole-archive flags. We could encapsulate this process within the
idf_build_executable function, but projects that only use
idf_build_library would need to implement the same solution.
It appears possible to address this issue by using target_link_options
instead. This allows to specify exactly what should appear on the link
command line. One side effect of this approach is that the library
appears on the link command line multiple times: first when used with
target_link_options and second when used in target_link_libraries.
However, this does not seem to pose a problem. The flags specified with
target_link_options appear on the command line first, ensuring that the
whole-archive is prioritized, and the component archive libraries may be
repeated on the link line anyway due to dependencies. Essentially, the
final link command line is very similar to the one from cmakev1. We may
revisit this approach in the future, but for now, it seems to work as
expected.
[1] https://gitlab.kitware.com/cmake/cmake/-/issues/20078
[2] https://cmake.org/cmake/help/latest/variable/CMAKE_LINK_LIBRARY_USING_FEATURE.html
[3] https://discourse.cmake.org/t/automatically-wrapping-a-static-library-
in-whole-archive-no-whole-archive-when-used-during-linking/5883
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Currently, when the cmakev1 properties for INCLUDE_DIRS and
PRIV_INCLUDE_DIRS are constructed in the
__set_component_cmakev1_properties function, the return values from the
get_target_property function for INCLUDE_DIRECTORIES and
INTERFACE_INCLUDE_DIRECTORIES properties are not checked. If a component
target does not set e.g. INCLUDE_DIRECTORIES property,
get_target_property will return a value such as `include_dirs-NOTFOUND`.
This value is subsequently passed to __get_relative_paths in the PATHS
argument, causing the file(RELATIVE_PATH) call in __get_relative_paths
to fail with an error.
```
CMake Error at /home/fhrbata/work/esp-idf/tools/cmakev2/utilities.cmake:235 (file):
file RELATIVE_PATH must be passed a full path to the file:
include_dirs-NOTFOUND
```
Fix this by explicitly set the PATHS to an empty list before passing it
to the __get_relative_paths function if the property is not set.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
