- Add BLE UART service example with OpenCode companion docs
- Add BLE UART bridge demo for opencode integration
- Add BLE UART common library improvements
On ESP32C2 with BT_CTRL_RUN_IN_FLASH_ONLY, the bt_default linker scheme
routes .iram1 sections to flash_text, causing BLE_LOG_IRAM_ATTR functions
to end up in flash instead of IRAM. Define a dedicated .ble_log_iram1
section for ESP32C2 and route it to iram0_bt_text unconditionally.
- Use __atomic_fetch_add for stat_mgr counters to prevent lost updates
under concurrent ISR/task access (H1)
- Use __atomic_load_n with ACQUIRE ordering for ref_count spin-loops (L1)
- Remove unnecessary BLE_LOG_IRAM_ATTR from ble_log_rt_task since it
calls flash-resident functions and cannot run during flash ops (L3)
- Add parentheses to BLE_LOG_TRANS_FREE_SPACE and BLE_LOG_MAKE_FRAME_META
macro parameters to prevent operator precedence bugs (M6)
- Reorder deinit: stop RT task before destroying peripheral driver to
prevent sending transports to a NULL dev_handle on dual-core (H2)
- Drain remaining queue items in rt_deinit to clean up transport state
- Add atomic flush_in_progress guard to prevent two concurrent
ble_log_flush() callers from deadlocking on ref_count spin-wait (H5)
- Handle scheduler-suspended and ISR context in UART redirect path
to prevent xSemaphoreTake crash during light sleep (C1)
- Check uart_driver_install return value before setting inited flag (M1)
- Always clean up SPI device handle in deinit even if acquire_bus fails (M4)
During light sleep transitions, the FreeRTOS scheduler is suspended but
xPortInIsrContext() returns false, causing xQueueSend with portMAX_DELAY
to hit a configASSERT. Add a check for taskSCHEDULER_SUSPENDED and use
a non-blocking send with rollback on queue-full to avoid resource leaks.
idf-ci discovers pyproject.toml pytest config and runs a separate
collection pass with --target all, which finds 0 target tests and
raises RuntimeError. Add to .idf_ci.toml exclude_dirs instead of
deleting tests. Restore all 227 unit tests with lint/mypy fixes.
(cherry picked from commit 205bc49fd6)
Co-authored-by: Zhou Xiao <zhouxiao@espressif.com>
Reflect changes from dev/ble-log-202603: ping-pong to multi-buffer
transport (4 buffers/LBM), renamed Kconfig options (LBM_TRANS_SIZE →
LBM_TRANS_BUF_SIZE with new defaults), always-enabled checksum and
enhanced statistics, UART redirection support, UHCI Out removal,
SPI Out deprecation, and updated memory estimation.
(cherry picked from commit aec896b6b9)
Co-authored-by: Zhou Xiao <zhouxiao@espressif.com>
Move per-chip BLE log Kconfig options (esp32c2/c5/c6/h2) into
components/bt/common/Kconfig.in for single-source-of-truth configuration.
Restructure menu as "BT Logs" with "Log Sources" sub-menu containing
controller log config options. Controller log output mode choice defaults
to BLE Log v2 when BLE_LOG_ENABLED, with legacy mode as deprecated
fallback. Migrate wrap_panic_handler and task_wdt_user_handler configs
as well since they depend on BT_LE_CONTROLLER_LOG_ENABLED.
(cherry picked from commit b5b886fd1e)
Co-authored-by: Zhou Xiao <zhouxiao@espressif.com>
Replace the two-step acquire() + get_trans() flow with a unified
acquire_trans() that iterates all candidate pools. When a pool's
buffers are exhausted, the lock is released and the next pool is
tried, enabling load balancing across pools instead of only
resolving lock contention.
(cherry picked from commit 1cc66e3888)
Co-authored-by: Zhou Xiao <zhouxiao@espressif.com>
Add BufUtilTracker to record per-LBM inflight peak data, wire it
through StatsAccumulator and StatsUpdated message for thread-safe
delivery to the UI. Buffer utilization is displayed in a dedicated
BufUtilScreen accessible via the 'm' keybinding, separate from
the frame stats screen ('d').
Also reject false INIT_DONE frames with version==0 caused by
misaligned data during parser sync, preventing spurious stats resets.
(cherry picked from commit ca920a8e8f)
Co-authored-by: Zhou Xiao <zhouxiao@espressif.com>
Add BUF_UTIL=5 to InternalSource, BufUtilPool enum, BufUtilResult
TypedDict, BufUtilEntry dataclass, and name resolution helpers.
Add decode branch in internal_decoder with pool/index extraction
from the packed lbm_id field. Tests cover valid decode, pool/index
extraction, and truncated payload handling.
(cherry picked from commit d9a4d15203)
Co-authored-by: Zhou Xiao <zhouxiao@espressif.com>
Replace __atomic_exchange_n with __atomic_load_n in
ble_log_emit_buf_util() so inflight_peak reports the all-time peak
since init rather than resetting to zero after each report.
(cherry picked from commit 257c4db455)
Co-authored-by: Zhou Xiao <zhouxiao@espressif.com>
Migrate all LBM, RT, and peripheral backend code from 2-buffer
ping-pong to 4-buffer transport with bitmask index arithmetic.
LBM changes:
- Init sets owner on each transport buffer
- get_trans/flush/dump use (idx+1) & (cnt-1) instead of !idx
- get_trans/flush use __atomic_load_n(ACQUIRE) for prph_owned
- New ble_log_write_buf_util() emits BUF_UTIL telemetry frames,
exchange peak with 0 to avoid stale baseline after bursts
RT changes:
- Queue depth uses unified BLE_LOG_TRANS_TOTAL_CNT
- rt_queue_trans uses __atomic_store_n for prph_owned, tracks
per-LBM inflight count and peak via lock-free CAS
- ISR path captures pxHigherPriorityTaskWoken and yields
Peripheral changes:
- All tx_done callbacks: decrement inflight before releasing
prph_owned with __atomic_store_n(RELEASE)
- SPI/UART send_trans error paths: decrement inflight and
release prph_owned to allow retry on next get_trans pass
- Dummy send_trans: recycle buffer immediately (pos=0, decrement
inflight, release prph_owned) since no DMA hardware to wait for
- Redir LBM upgraded to 4-buffer with owner and reset support
- All peripherals implement ble_log_prph_reset_util_counters()
(cherry picked from commit 75eef04a2c)
Co-authored-by: Zhou Xiao <zhouxiao@espressif.com>
- Click-based CLI entry point (console.py) with --port, --baudrate,
--log-dir options and interactive Launch Screen when --port omitted
- Deprecation warning for --output CLI flag
- 'ls' subcommand to list saved capture files
- PyInstaller build scripts (build.sh, build.bat, build_exe.py)
- Convenience run scripts (run.sh, run.bat)
- README rewrite with installation, usage, architecture docs, and
troubleshooting guide
- User guides in English and Chinese
- Remove old single-file ble_log_console.py
- Register new scripts in executable-list.txt
(cherry picked from commit a51d879d1b)
Co-authored-by: Zhou Xiao <zhouxiao@espressif.com>
TUI frontend built on Textual with thread-safe backend integration:
- Launch screen with port/baud/log-dir selection and auto-refresh
- Log view with scrollable RichLog and color-coded write methods;
Rich markup escaped to prevent crash on bracket characters
- Stats screen split into two tables by time base:
- Firmware Counters (since chip init): Written and Buffer Loss
- Console Measurements (since console start): Average Throughput
and Peak Write — each with separate frames and bytes sub-columns
- Column widths constrained with min_width/max_width for stable layout
- Division-by-zero guard when peak window is zero
- Shortcut screen overlay
- Status panel with sync state, checksum mode, and transport metrics;
speed display uses named UART_BITS_PER_BYTE constant
- Main app wiring: UART reader thread with threading.Lock for serial
access, frame parser pipeline, stats emission via StatsUpdated
messages (including funnel snapshots via public accessor for
thread-safe delivery), BackendStopped message for disconnect
- BackendStopped posted on open_serial failure (prevents stuck status)
- Select.BLANK guard for baud rate in launch screen
- Explicit None guards replace asserts in backend worker
- Wall-clock burst tracking for REDIR frames (no chip-side timestamp)
- SN gap alerts (FrameLossDetected) and traffic spike notifications
(cherry picked from commit 02f1960e56)
Co-authored-by: Zhou Xiao <zhouxiao@espressif.com>
Add BLE_LOG_GET_FRAME_SN() on the buffer-full loss path so the SN
counter advances even when frames are dropped. This allows the console
to detect firmware-side buffer loss via SN gaps. Bump BLE_LOG_VERSION
to reflect the semantic change.
(cherry picked from commit 42f2aeedb7)
Co-authored-by: Zhou Xiao <zhouxiao@espressif.com>
Introduce stream write API with deferred frame encapsulation for UART
redirection on port 0. Redirected data is now properly framed (header +
payload + checksum) instead of being sent as raw ASCII, preventing frame
parser sync oscillation on the receiver.
- Add stream_seal/stream_write/stream_flush in ble_log_lbm.c
- Add BLE_LOG_SRC_REDIR source and BLE_LOG_UART_REDIR_ENABLED gate
- Simplify redir_uart_tx_chars and timer callback to use stream API
- Flush pending stream data in ble_log_prph_deinit
- Make get_trans static (no external callers after refactor)
- Move UART wrap linker flags outside CONFIG_BT_ENABLED guard
- Default UART DMA peripheral when SOC_UHCI_SUPPORTED
- Default baud rate 921600 -> 3000000
(cherry picked from commit a181fc156d)
Co-authored-by: Zhou Xiao <zhouxiao@espressif.com>
Replace embedded ble_log_enh_stat_t (packed wire struct) inside
ble_log_stat_mgr_t with flat uint32_t counters. Natural 4-byte
alignment ensures each load/store compiles to a single l32i/s32i
on Xtensa/RISC-V, making individual field access atomic without
locks.
Build the packed wire format on the stack inside a critical section
in ble_log_write_enh_stat() so the full snapshot is consistent.
(cherry picked from commit 4d193873f1)
Co-authored-by: Zhou Xiao <zhouxiao@espressif.com>
Remove CONFIG_BLE_LOG_PAYLOAD_CHECKSUM_ENABLED conditional compilation
-- payload checksum is always computed over the full frame.
Remove CONFIG_BLE_LOG_XOR_CHECKSUM_ENABLED conditional -- XOR checksum
is always used; delete the sum checksum dead code path.
Remove CONFIG_BLE_LOG_ENH_STAT_ENABLED conditional -- enhanced
statistics (frame/byte counters per source) are always active.
Remove incorrect select on choice symbol
BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2 from BLE_LOG_IS_ESP_CONTROLLER.
(cherry picked from commit 3eb2f57605)
Co-authored-by: Zhou Xiao <zhouxiao@espressif.com>
Move ble_log_spi_out.c and ble_log_spi_out.h into a deprecated/
subdirectory under components/bt/common/ble_log/. Extract all
BT_BLE_LOG_SPI_OUT_* Kconfig options into deprecated/Kconfig.in
with an if-block to reduce depends-on repetition, sourced from
ble_log/Kconfig.in inside a "Legacy SPI Log Output (Deprecated)"
menu. Add mutual exclusion with BLE_LOG_ENABLED so that the legacy
SPI Out and the new BLE Log Module cannot be enabled simultaneously.
Update CMakeLists.txt source path and add deprecated/include to
include dirs so existing callers are unaffected. The BLE Log
Module's SPI Master DMA peripheral transport is the replacement.
(cherry picked from commit e2d38955de)
Co-authored-by: Zhou Xiao <zhouxiao@espressif.com>
Delete ble_log_uhci_out.c and its header. Remove the UHCI Out source
from CMakeLists.txt and all BT_BLE_LOG_UHCI_OUT_* Kconfig options.
Remove per-chip BT_LE_CONTROLLER_LOG_UHCI_OUT_ENABLED Kconfig and
all UHCI Out caller references in esp32c5/c6/h2 controller bt.c.
Update ble_log_console README to reference the new BLE Log Module
UART DMA config. The functionality is superseded by the BLE Log
Module's UART DMA peripheral transport.
(cherry picked from commit d51892380b)
Co-authored-by: Zhou Xiao <zhouxiao@espressif.com>
Add ble_log_write_hci macro that encodes upstream/downstream direction
in MSB of HCI type byte. Update all 4 callsites (NimBLE + Bluedroid)
to use the new macro. Parser reads MSB to determine direction;
backward compatible (old firmware MSB=0 defaults to "sent").
(cherry picked from commit 8fd5dbb730)
Co-authored-by: Zhou Xiao <zhouxiao@espressif.com>
Zhou Xiao
