`__COMPONENT_TARGETS` is evaluated very early when components and
component directories are added to the build, which means that all
components (including the ones which are in EXCLUDE_COMPONENTS) have
a build system target defined. The component manager was given the
list of all known components (derived from the list of targets), not
the list of components after EXCLUDE_COMPONENTS were processed.
Because of that, EXCLUDE_COMPONENTS didn't effectively exclude the
component from the consideration of the component manager.
Changes accumulated since 20210826 release:
- Fixed cache flush emulation
- Fixed loading of baremetal ELF files via -kernel arg
- Added emulation of AES peripheral
- Fixed division by zero in UART emulation
- Fixed APP CPU using same ROM code as PRO CPU
- Base QEMU version upgraded from 6.1.0 to 7.0.0
Since both chips have built-in JTAG functionality, and there are no
official boards with FT2232H for these chips, use the built-in JTAG
by default.
To use them with esp-prog, set:
OPENOCD_COMMANDS="-f board/esp32c3-ftdi.cfg"
or pass this via the --openocd-commands argument to idf.py.
Blocking read from cdcacm VFS could return less bytes than requested.
This didn’t match the behaviour of other VFS drivers, and higher level
code could misbehave.
Previously, reset over USB CDC was done by calling esp_restart from
an interrupt handler. This works only until some restart hook function
is registered using esp_register_shutdown_handler, and the hook
function tries to do something that isn’t allowed in an interrupt
handler. One such case is with Wi-Fi. When Wi-Fi driver is installed,
it registers esp_wifi_stop as a shutdown handler function. However
esp_wifi_stop cannot be called from an ISR, and hence we shouldn’t
call esp_restart from an ISR either.
This commit modifies USB CDC driver to call esp_restart by posting it
to esp_timer task.
Closes https://github.com/espressif/esp-idf/issues/7404
This allows calling esp_log_level_set function from the console.
Together with CONFIG_LOG_MAXIMUM_LEVEL option, this allows enabling
logs from different tags at run time.
* Some components have initialization dependencies. To account for
them, simple numeric priority values are introduced.
* esp_system_init_fn_array moved into Flash from DRAM
* System init functions defined using ESP_SYSTEM_INIT_FN now return
an error code. This enables simpler and more consistent error
handling in the init functions. Returning an error from an init
function is now a valid approach — the startup code will print
an error and abort.
Many of the more complicated CMake projects can't be added to the IDF
build system simply by calling add_subdirectory.
"add_subdirectory" also cannot be used with projects which use build
systems other than CMake (for example GNU Make or cargo).
This commit changes the example to use ExternalProject_Add, instead,
which is a more general way of adding subprojects.
As part of this change, tinyxml2 is now downloaded from the Internet,
which allows removing one submodule.
XTAL_CLK_FREQ now depends on the actual XTAL used, remove this macro
and get the XTAL frequency from the RTC register instead.
No uses of XTAL_CLK_FREQ found, other than in the UART LL.
When ESP32-C2 is paired with a 26 MHz XTAL, the systimer tick
frequency becomes equal to 26 / 2.5 = 10.4 MHz. Previously we always
assumed that systimer tick frequency is integer (and 1 MHz * power of
two, above that!).
This commit introduces a new LL macro, SYSTIMER_LL_TICKS_PER_US_DIV.
It should be set in such a way that:
1. SYSTIMER_LL_TICKS_PER_US / SYSTIMER_LL_TICKS_PER_US_DIV equals the
actual systimer tick frequency,
2. and SYSTIMER_LL_TICKS_PER_US is integer.
For ESP32-C2 this means that SYSTIMER_LL_TICKS_PER_US = 52 and
SYSTIMER_LL_TICKS_PER_US_DIV = 5.
This introduced two possible issues:
1. Overflow when multiplying systimer counter by 5
- Should not be an issue, since systimer counter is 52-bit, so
counter * 5 is no more than 55-bit.
2. The code needs to perform:
- divide by 5: when converting from microseconds to ticks
- divide by 52: when converting from ticks to microseconds
The latter potentially introduces a performance issue for the
esp_timer_get_time function.
Some esp32c2 boards will be produced with a 26 MHz XTAL. This commit
adds the basic Kconfig option for this type of hardware.
Support for CONFIG_ESP32C2_XTAL_FREQ_26 in other areas of IDF will be
implemented in subsequent commits.
In C++20, using the result of an assignment to a 'volatile' value is
deprecated.
Breaking change: register "setter" or modification macros can no
longer be used as expressions.
Closes https://github.com/espressif/esp-idf/issues/9170
The bundled version of asio uses legacy concepts syntax
(https://en.cppreference.com/w/cpp/experimental/constraints) which is
not accepted by GCC with -std=c++20.
Disable the concepts support until asio is upgraded to a version which
supports the new syntax.
The previously used splits between memory allocated for ROM code,
2nd stage bootloader and the app were somewhat safe and conservative.
This resulted in some space being unavailable for static allocation
in the app.
This commit increases the space available for static allocation to the
maximum possible amount.
1. Some of the ROM code static allocation is only used in UART/USB/SPI
download modes. This region ("shared buffers") has been placed at
the lower end of ROM memory area, to be reusable in flash boot
mode. The 2nd stage bootloader linker script is modified to "pack"
all sections exactly up to the end but with roughly 8K margin between
startup stacks.
2. Instead of calculating the sections placement and hardcoding the
addresses in the LD script again, rewrite it to calculate the
start address of each memory region automatically based on the
logic above.
3. Adjust the app memory layout (SRAM_IRAM_END) accordingly,
increasing the space available for static allocation.
Overall these changes increase the space available for static
allocation by about 78kB.
The downside of these changes is that the 2nd stage bootloader .data
segment is now directly adjacent to the startup stack on the PRO CPU.
Previously, there was effectively about 78kB of extra stack space for
the PRO CPU, before the stack would run into the data segment.
mktime function uses tm_isdst member as an indicator whether the time
stamp is expected to be in daylight saving time (1) or not (0).
FAT filesystem uses local time as mtime, so no information about DST
is available from the filesystem.
According to mktime documentation, tm_isdst can be set to -1, in which
case the C library will try to determine if DST was or wasn't in
effect at that time, and will set UTC time accordingly.
Note that the conversion from UTC to local time and then back to UTC
(time_t -> localtime_r -> FAT timestamp -> mktime -> time_t) does not
always recover the same UTC time. In particular, the local time in the
hour before DST comes into effect can be interpreted as "before DST"
or "after DST", which would correspond to different UTC values. In
this case which option the C library chooses is undefined.
Closes https://github.com/espressif/esp-idf/issues/9039
Originally reported in https://github.com/espressif/arduino-esp32/issues/6786
Previous version of the code used a fixed constant (500 ms) for the
erase timeout and added 1 ms for each sector erased.
This commit improves timeouts calculation:
- For SD cards, check if erase timeout information is present in the
SSR register. If yes, use it for erase timeout calculation.
Otherwise assume 250ms per erase block, same as Linux does.
- For eMMC assume 250ms per erase block (but no less than 1 second).
This has to be improved later to use the erase timeout info in the
extended CSD register.
Same as for write operation, some errors are reported only via CMD13.
Without the R1b response support in sdspi driver, this check would
fail. Now that R1b support is implemented, erase command response is
zero (success) on all cards under test.
Also remove the now-unnecessary card reset after erase in the test
case.
During write operation (CMD24 or CMD25), the card can report some of
the errors in the 1-byte response tokens. Other types of errors are
not reported, the host has to get them by issuing CMD13.
This commit adds CMD13 request at the end of write operations and
reports error to the user if the card status isn't zero.
Numerical value of MMC_SEND_STATUS is the same as SD_APP_SD_STATUS,
so there is no functional change. Just making this consistent with the
sdmmc_send_app_cmd call later on.
Replaces the previously used Docker Hub autobuild infrastructure.
This allows for more flexible configuration of the build process,
at the expense of some extra maintenance of CI workflow files
required.
These two arguments can be used to reduce the size of the Docker
image:
- Setting IDF_CLONE_SHALLOW enables shallow cloning.
- Setting IDF_INSTALL_TARGETS to the comma separated list of targets
results in toolchains being installed only for these targets.
SD card example prints the line which looks like:
Name: 00000
If only part of the line is received, the regular expression in the
test still matches, and partial name is obtained. Later the example
test expects to see the same name in the file read from the SD card.
This check fails, because only partial name was received earlier.
Fix by adding a CR to the regular expression so that the entire name
is matched.
The iperf version used in older version of CI docker images had the
following output format:
[ 3] 0.0-10.0 sec 1.25 MBytes 1.05 Mbits/sec 0.000 ms 0/ 892 (0%)
The newer iperf version which was recently included in the container
prints more digits after the decimal point:
[ 3] 0.0000-10.0148 sec 1.25 MBytes 1.05 Mbits/sec 0.002 ms 0/ 895 (0%)
The regular expression to match this line expected a single zero after
the decimal point, so the new format no longer matches.
The fix is to expect any number of digits in the fractional part.
Previously linenoiseProbe would accept any 4 byte response, even one
that isn't expected. This adds a check that the first byte of the
response is ESC.
Suggested in https://github.com/espressif/esp-idf/issues/8839.
When vfs component is not added to the build, bare minimum syscalls
are provided by newlib component. These syscalls currently don't
perform CR/LF translation.
This commit makes the 'get_test_name' function work with minimal
syscalls and also adds echo, so that the user sees what they type.
Ivan Grokhotkov