feat(ble_audio): Add specific libs for BLE Audio log compression

examples/bluetooth/esp_ble_audio/bap/broadcast_sink/sdkconfig.defaults

@@ -38,3 +38,15 @@ CONFIG_FREERTOS_HZ=1000
 # CONFIG_BT_ISO_HEAP_EXTERNAL_MEMORY=y
 # CONFIG_BT_AUDIO_BSS_SEG_EXTERNAL_MEMORY=y
 # CONFIG_BT_AUDIO_HEAP_EXTERNAL_MEMORY=y
+
+# Bandwidth-optimized (critical-only) compressed BLE Audio/ISO logging over
+# UART DMA. Pins shown are for esp32s31 (UART0 TX = GPIO58, 3000000 baud); set
+# CONFIG_BLE_LOG_PRPH_UART_DMA_* values to the port/pin your capture reads.
+# CONFIG_BLE_LOG_ENABLED=y
+# CONFIG_BT_LOG_CRITICAL_ONLY=y
+# CONFIG_BLE_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_ISO_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA_PORT=0
+# CONFIG_BLE_LOG_PRPH_UART_DMA_BAUD_RATE=3000000
+# CONFIG_BLE_LOG_PRPH_UART_DMA_TX_IO_NUM=58

examples/bluetooth/esp_ble_audio/bap/broadcast_source/sdkconfig.defaults

@@ -28,3 +28,15 @@ CONFIG_FREERTOS_HZ=1000
 # CONFIG_BT_ISO_HEAP_EXTERNAL_MEMORY=y
 # CONFIG_BT_AUDIO_BSS_SEG_EXTERNAL_MEMORY=y
 # CONFIG_BT_AUDIO_HEAP_EXTERNAL_MEMORY=y
+
+# Bandwidth-optimized (critical-only) compressed BLE Audio/ISO logging over
+# UART DMA. Pins shown are for esp32s31 (UART0 TX = GPIO58, 3000000 baud); set
+# CONFIG_BLE_LOG_PRPH_UART_DMA_* values to the port/pin your capture reads.
+# CONFIG_BLE_LOG_ENABLED=y
+# CONFIG_BT_LOG_CRITICAL_ONLY=y
+# CONFIG_BLE_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_ISO_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA_PORT=0
+# CONFIG_BLE_LOG_PRPH_UART_DMA_BAUD_RATE=3000000
+# CONFIG_BLE_LOG_PRPH_UART_DMA_TX_IO_NUM=58

examples/bluetooth/esp_ble_audio/bap/unicast_client/sdkconfig.defaults

@@ -30,3 +30,15 @@ CONFIG_FREERTOS_HZ=1000
 # CONFIG_BT_ISO_HEAP_EXTERNAL_MEMORY=y
 # CONFIG_BT_AUDIO_BSS_SEG_EXTERNAL_MEMORY=y
 # CONFIG_BT_AUDIO_HEAP_EXTERNAL_MEMORY=y
+
+# Bandwidth-optimized (critical-only) compressed BLE Audio/ISO logging over
+# UART DMA. Pins shown are for esp32s31 (UART0 TX = GPIO58, 3000000 baud); set
+# CONFIG_BLE_LOG_PRPH_UART_DMA_* values to the port/pin your capture reads.
+# CONFIG_BLE_LOG_ENABLED=y
+# CONFIG_BT_LOG_CRITICAL_ONLY=y
+# CONFIG_BLE_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_ISO_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA_PORT=0
+# CONFIG_BLE_LOG_PRPH_UART_DMA_BAUD_RATE=3000000
+# CONFIG_BLE_LOG_PRPH_UART_DMA_TX_IO_NUM=58

examples/bluetooth/esp_ble_audio/bap/unicast_server/sdkconfig.defaults

@@ -37,3 +37,15 @@ CONFIG_FREERTOS_HZ=1000
 # CONFIG_BT_ISO_HEAP_EXTERNAL_MEMORY=y
 # CONFIG_BT_AUDIO_BSS_SEG_EXTERNAL_MEMORY=y
 # CONFIG_BT_AUDIO_HEAP_EXTERNAL_MEMORY=y
+
+# Bandwidth-optimized (critical-only) compressed BLE Audio/ISO logging over
+# UART DMA. Pins shown are for esp32s31 (UART0 TX = GPIO58, 3000000 baud); set
+# CONFIG_BLE_LOG_PRPH_UART_DMA_* values to the port/pin your capture reads.
+# CONFIG_BLE_LOG_ENABLED=y
+# CONFIG_BT_LOG_CRITICAL_ONLY=y
+# CONFIG_BLE_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_ISO_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA_PORT=0
+# CONFIG_BLE_LOG_PRPH_UART_DMA_BAUD_RATE=3000000
+# CONFIG_BLE_LOG_PRPH_UART_DMA_TX_IO_NUM=58

examples/bluetooth/esp_ble_audio/cap/acceptor/sdkconfig.defaults

@@ -44,3 +44,15 @@ CONFIG_FREERTOS_HZ=1000
 # CONFIG_BT_ISO_HEAP_EXTERNAL_MEMORY=y
 # CONFIG_BT_AUDIO_BSS_SEG_EXTERNAL_MEMORY=y
 # CONFIG_BT_AUDIO_HEAP_EXTERNAL_MEMORY=y
+
+# Bandwidth-optimized (critical-only) compressed BLE Audio/ISO logging over
+# UART DMA. Pins shown are for esp32s31 (UART0 TX = GPIO58, 3000000 baud); set
+# CONFIG_BLE_LOG_PRPH_UART_DMA_* values to the port/pin your capture reads.
+# CONFIG_BLE_LOG_ENABLED=y
+# CONFIG_BT_LOG_CRITICAL_ONLY=y
+# CONFIG_BLE_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_ISO_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA_PORT=0
+# CONFIG_BLE_LOG_PRPH_UART_DMA_BAUD_RATE=3000000
+# CONFIG_BLE_LOG_PRPH_UART_DMA_TX_IO_NUM=58

examples/bluetooth/esp_ble_audio/cap/initiator/sdkconfig.defaults

@@ -35,3 +35,15 @@ CONFIG_FREERTOS_HZ=1000
 # CONFIG_BT_ISO_HEAP_EXTERNAL_MEMORY=y
 # CONFIG_BT_AUDIO_BSS_SEG_EXTERNAL_MEMORY=y
 # CONFIG_BT_AUDIO_HEAP_EXTERNAL_MEMORY=y
+
+# Bandwidth-optimized (critical-only) compressed BLE Audio/ISO logging over
+# UART DMA. Pins shown are for esp32s31 (UART0 TX = GPIO58, 3000000 baud); set
+# CONFIG_BLE_LOG_PRPH_UART_DMA_* values to the port/pin your capture reads.
+# CONFIG_BLE_LOG_ENABLED=y
+# CONFIG_BT_LOG_CRITICAL_ONLY=y
+# CONFIG_BLE_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_ISO_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA_PORT=0
+# CONFIG_BLE_LOG_PRPH_UART_DMA_BAUD_RATE=3000000
+# CONFIG_BLE_LOG_PRPH_UART_DMA_TX_IO_NUM=58

examples/bluetooth/esp_ble_audio/tmap/bmr/sdkconfig.defaults

@@ -35,3 +35,15 @@ CONFIG_FREERTOS_HZ=1000
 # CONFIG_BT_ISO_HEAP_EXTERNAL_MEMORY=y
 # CONFIG_BT_AUDIO_BSS_SEG_EXTERNAL_MEMORY=y
 # CONFIG_BT_AUDIO_HEAP_EXTERNAL_MEMORY=y
+
+# Bandwidth-optimized (critical-only) compressed BLE Audio/ISO logging over
+# UART DMA. Pins shown are for esp32s31 (UART0 TX = GPIO58, 3000000 baud); set
+# CONFIG_BLE_LOG_PRPH_UART_DMA_* values to the port/pin your capture reads.
+# CONFIG_BLE_LOG_ENABLED=y
+# CONFIG_BT_LOG_CRITICAL_ONLY=y
+# CONFIG_BLE_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_ISO_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA_PORT=0
+# CONFIG_BLE_LOG_PRPH_UART_DMA_BAUD_RATE=3000000
+# CONFIG_BLE_LOG_PRPH_UART_DMA_TX_IO_NUM=58

examples/bluetooth/esp_ble_audio/tmap/bms/sdkconfig.defaults

@@ -30,3 +30,15 @@ CONFIG_FREERTOS_HZ=1000
 # CONFIG_BT_ISO_HEAP_EXTERNAL_MEMORY=y
 # CONFIG_BT_AUDIO_BSS_SEG_EXTERNAL_MEMORY=y
 # CONFIG_BT_AUDIO_HEAP_EXTERNAL_MEMORY=y
+
+# Bandwidth-optimized (critical-only) compressed BLE Audio/ISO logging over
+# UART DMA. Pins shown are for esp32s31 (UART0 TX = GPIO58, 3000000 baud); set
+# CONFIG_BLE_LOG_PRPH_UART_DMA_* values to the port/pin your capture reads.
+# CONFIG_BLE_LOG_ENABLED=y
+# CONFIG_BT_LOG_CRITICAL_ONLY=y
+# CONFIG_BLE_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_ISO_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA_PORT=0
+# CONFIG_BLE_LOG_PRPH_UART_DMA_BAUD_RATE=3000000
+# CONFIG_BLE_LOG_PRPH_UART_DMA_TX_IO_NUM=58

examples/bluetooth/esp_ble_audio/tmap/central/sdkconfig.defaults

@@ -40,6 +40,18 @@ CONFIG_BT_TBS_SUPPORTED_FEATURES=3
 # CONFIG_BT_AUDIO_BSS_SEG_EXTERNAL_MEMORY=y
 # CONFIG_BT_AUDIO_HEAP_EXTERNAL_MEMORY=y
 
+# Bandwidth-optimized (critical-only) compressed BLE Audio/ISO logging over
+# UART DMA. Pins shown are for esp32s31 (UART0 TX = GPIO58, 3000000 baud); set
+# CONFIG_BLE_LOG_PRPH_UART_DMA_* values to the port/pin your capture reads.
+# CONFIG_BLE_LOG_ENABLED=y
+# CONFIG_BT_LOG_CRITICAL_ONLY=y
+# CONFIG_BLE_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_ISO_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA_PORT=0
+# CONFIG_BLE_LOG_PRPH_UART_DMA_BAUD_RATE=3000000
+# CONFIG_BLE_LOG_PRPH_UART_DMA_TX_IO_NUM=58
+
 CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE=y
 
 CONFIG_FREERTOS_HZ=1000

examples/bluetooth/esp_ble_audio/tmap/peripheral/sdkconfig.defaults

@@ -54,3 +54,15 @@ CONFIG_FREERTOS_HZ=1000
 # CONFIG_BT_ISO_HEAP_EXTERNAL_MEMORY=y
 # CONFIG_BT_AUDIO_BSS_SEG_EXTERNAL_MEMORY=y
 # CONFIG_BT_AUDIO_HEAP_EXTERNAL_MEMORY=y
+
+# Bandwidth-optimized (critical-only) compressed BLE Audio/ISO logging over
+# UART DMA. Pins shown are for esp32s31 (UART0 TX = GPIO58, 3000000 baud); set
+# CONFIG_BLE_LOG_PRPH_UART_DMA_* values to the port/pin your capture reads.
+# CONFIG_BLE_LOG_ENABLED=y
+# CONFIG_BT_LOG_CRITICAL_ONLY=y
+# CONFIG_BLE_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_ISO_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA_PORT=0
+# CONFIG_BLE_LOG_PRPH_UART_DMA_BAUD_RATE=3000000
+# CONFIG_BLE_LOG_PRPH_UART_DMA_TX_IO_NUM=58

examples/bluetooth/esp_ble_iso/big_broadcaster/sdkconfig.defaults

@@ -24,3 +24,15 @@ CONFIG_FREERTOS_HZ=1000
 # CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY=y
 # CONFIG_BT_ISO_BSS_SEG_EXTERNAL_MEMORY=y
 # CONFIG_BT_ISO_HEAP_EXTERNAL_MEMORY=y
+
+# Bandwidth-optimized (critical-only) compressed BLE Audio/ISO logging over
+# UART DMA. Pins shown are for esp32s31 (UART0 TX = GPIO58, 3000000 baud); set
+# CONFIG_BLE_LOG_PRPH_UART_DMA_* values to the port/pin your capture reads.
+# CONFIG_BLE_LOG_ENABLED=y
+# CONFIG_BT_LOG_CRITICAL_ONLY=y
+# CONFIG_BLE_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_ISO_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA_PORT=0
+# CONFIG_BLE_LOG_PRPH_UART_DMA_BAUD_RATE=3000000
+# CONFIG_BLE_LOG_PRPH_UART_DMA_TX_IO_NUM=58

examples/bluetooth/esp_ble_iso/big_receiver/sdkconfig.defaults

@@ -24,3 +24,15 @@ CONFIG_FREERTOS_HZ=1000
 # CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY=y
 # CONFIG_BT_ISO_BSS_SEG_EXTERNAL_MEMORY=y
 # CONFIG_BT_ISO_HEAP_EXTERNAL_MEMORY=y
+
+# Bandwidth-optimized (critical-only) compressed BLE Audio/ISO logging over
+# UART DMA. Pins shown are for esp32s31 (UART0 TX = GPIO58, 3000000 baud); set
+# CONFIG_BLE_LOG_PRPH_UART_DMA_* values to the port/pin your capture reads.
+# CONFIG_BLE_LOG_ENABLED=y
+# CONFIG_BT_LOG_CRITICAL_ONLY=y
+# CONFIG_BLE_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_ISO_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA_PORT=0
+# CONFIG_BLE_LOG_PRPH_UART_DMA_BAUD_RATE=3000000
+# CONFIG_BLE_LOG_PRPH_UART_DMA_TX_IO_NUM=58

examples/bluetooth/esp_ble_iso/cis_central/sdkconfig.defaults

@@ -23,3 +23,15 @@ CONFIG_FREERTOS_HZ=1000
 # CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY=y
 # CONFIG_BT_ISO_BSS_SEG_EXTERNAL_MEMORY=y
 # CONFIG_BT_ISO_HEAP_EXTERNAL_MEMORY=y
+
+# Bandwidth-optimized (critical-only) compressed BLE Audio/ISO logging over
+# UART DMA. Pins shown are for esp32s31 (UART0 TX = GPIO58, 3000000 baud); set
+# CONFIG_BLE_LOG_PRPH_UART_DMA_* values to the port/pin your capture reads.
+# CONFIG_BLE_LOG_ENABLED=y
+# CONFIG_BT_LOG_CRITICAL_ONLY=y
+# CONFIG_BLE_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_ISO_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA_PORT=0
+# CONFIG_BLE_LOG_PRPH_UART_DMA_BAUD_RATE=3000000
+# CONFIG_BLE_LOG_PRPH_UART_DMA_TX_IO_NUM=58

examples/bluetooth/esp_ble_iso/cis_peripheral/sdkconfig.defaults

@@ -23,3 +23,15 @@ CONFIG_FREERTOS_HZ=1000
 # CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY=y
 # CONFIG_BT_ISO_BSS_SEG_EXTERNAL_MEMORY=y
 # CONFIG_BT_ISO_HEAP_EXTERNAL_MEMORY=y
+
+# Bandwidth-optimized (critical-only) compressed BLE Audio/ISO logging over
+# UART DMA. Pins shown are for esp32s31 (UART0 TX = GPIO58, 3000000 baud); set
+# CONFIG_BLE_LOG_PRPH_UART_DMA_* values to the port/pin your capture reads.
+# CONFIG_BLE_LOG_ENABLED=y
+# CONFIG_BT_LOG_CRITICAL_ONLY=y
+# CONFIG_BLE_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_ISO_COMPRESSED_LOG_ENABLE=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA=y
+# CONFIG_BLE_LOG_PRPH_UART_DMA_PORT=0
+# CONFIG_BLE_LOG_PRPH_UART_DMA_BAUD_RATE=3000000
+# CONFIG_BLE_LOG_PRPH_UART_DMA_TX_IO_NUM=58