* add dc_resend_msgs() to ffi
* add 'resend' to repl
* implement resend_msgs()
* allow only resending if allowed by chat-protection
this means, resending is denied if a chat is protected and we cannot encrypt
(normally, however, we should not arrive in that state)
* allow only resending of normal, non-info-messages
* allow only resending of own messages
* reset sending state to OutPending on resending
the resulting state is always OutDelivered first,
OutMdnRcvd again would be applied when a read receipt is received.
preserving old state is doable, however,
maybe this simple approach is also good enough, at least for now
(or maybe the simple approach is even just fine :)
another thing: when we upgrade to resending foreign messages,
we do not have a simple way to mark them as pending
as incoming message just do not have such a state -
but this is sth. for the future.
* show 'Not connected' if storage information are not yet available
'One moment' is a bit misleading in case the device is offline
as it will take more than a moment until that will be updated :)
* update CHANGELOG
this bypasses the replication safety introduced by letting the caller track the last serial,
however, in case of bots that do not track much state and do not playback updates anyway,
it is still useful.
* (r10s, adb, hpk) remove getAllUpdates() and add a typical replica-API that works with increasing serials. Streamline docs a bit.
* adapt ffi to new api
* documentation: updates serials may have gaps
* get_webxdc_status_updates() return updates larger than a given serial
* remove status_update_id from status-update-event; it is not needed (ui should update from the last known serial) and easily gets confused with last_serial
* unify wording to 'StatusUpdateSerial'
* remove legacy payload format, all known webxdc should be adapted
* add serial and max_serial to status updates
* avoid races when getting max_serial by avoiding two SQL calls
* update changelog
Co-authored-by: B. Petersen <r10s@b44t.com>
* Make set_config() look a bit nicer
* Add OnlyFetchMvbox option
* Add test for the config
* Add option to only watch mvbox
This is supposed to support having a server-side rule which moves
emails to the mvbox already. The new option makes sure the mvbox is
wathched and also makes sure no messages are feched from folders other
than the mvbox and the spam folder if enabled. It does not interact
with the other settings.
* Fixup ignore conditions
* Cleanup some bits
* Watch the mvbox when `WatchMvboxOnly` is set
* Rename back to only_fetch_mvbox (flub said it's OK for him)
* typo
* clippy, more typos
Co-authored-by: Hocuri <hocuri@gmx.de>
the summary can be modified by the apps using
`sendUpdate({summary: "foo", payload: ...})`
the summary is updated when there is no newer update
and chat will be informed by the change as usual by
`DC_EVENT_MSGS_CHANGED`.
To create encrypted account with account manager, call
dc_accounts_add_closed_account(). Open this account with
dc_context_open() using the passphrase you want to use for encryption.
When application is loaded next time and account manager is created,
it will open all accounts that have no passphrase set. For encrypted
accounts dc_context_is_open() will return 0. To open them, call
dc_context_open() with the correct passphrase. After opening, call
dc_context_start_io() on this account or just dc_accounts_start_io()
to start all accounts that are not started yet.
Support for legacy SQLite-based backup format is removed in this
commit.
Also resultified `get_watched_folders`.
Python test `test_moved_markseen` is modified to test using incoming
message instead of BCC-self message, because BCC-self message is
detected immediately in the Inbox.
* we no longer set a draft on group creation
* remove probably outdated comment
the comment was added at
https://github.com/deltachat/deltachat-core/pull/457
where draft revamping was done half only
and was probably forgotten to being removed later.
at least, i cannot make any sense out of the comment.
ASCII armored keys can be easily generated with `sq key generate` and
used to encrypt and decrypt test messages with `sq` and `gpg` without
converting them to binary using `base64 -d` first.
* generate qr code svg prototype
* qr code for groups
fix formatting
* - letter avatar in qrcode
- escape xml in userinput (display/groupname)
- fix "Me" display name
- merge import declarations
* remove dot at the end of VerifyContactQRDescription
* if addr == displayname, show only one of them
Especially useful for yggmail accounts without usernames,
because the text would overflow otherwise.
* use real clipPath for rounded avatar
* - center avatar text better (dominant-baseline)
- add "sans-serif" to font fallback for text if arial is missing
* make corner always blue
* add [logo + "get.delta.chat"] footer to qrcode
* Update deltachat-ffi/deltachat.h
Co-authored-by: bjoern <r10s@b44t.com>
* Apply suggestions from code review
Co-authored-by: bjoern <r10s@b44t.com>
* new card design
- add stockstrings
- update changelog
* make qrcode pixels also #f2f2f2 instead of full white
* rename VERIFY_CONTACT_QR_DESC to SETUP_CONTACT
make footer text a tiny bit darker upon r10s's request
* avoid using which is a doxygen command
* point out that one will join a group (this is still shorted and was also suggested in recent chats)
* add option to generate qr-code-svg to repl tool
* use same font-family in text and footer
* thinner card border
* remove superfluous <tspan> from footer to make color tweaking easier
* move font-weight to style, ios renderer does not pick it up from attribute; remove default font attributes not used consequently
* make get.delta.chat more visible
* align properly using dominant-baseline=central and alignment-baseline=middle, this makes things nice on all systems but android (before, ios was wrong and all others not 100% aligned as font metrics are ignored) (android needs a subsequent improvement)
Co-authored-by: bjoern <r10s@b44t.com>
It was there since the C core, labeled with "/* last_seen is for
future use */" but never actually used. The comment was lost during
the translation from C to Rust.
* refactor: cleanup send_handshake_msg()
- rename to send_alice_handshake_msg() as used by Alice only
- remove dead code from Bob
(Bob's code is at BobState::send_handshake_message() since some time)
- take a contact_id and not a chat_id;
this makes things less confusing when
info-messages are put to the final group chat
* always directly return chat-id from dc_join_securejoin()
* take care not to create a group twice
* adapt documentation
* add info-msg on group invites; add inviter directly after creation
* document existing 'joinqr' command in repl tool
* do not create empty one-to-one chats for group-joins
* refactor: cleanup fingerprint_equals_sender()
- the function takes a contact_id directly now.
before it consumes the first contact of a one-to-one chat -
which may be easily confused with the group-chat in creation.
moreover, the conversion contact_id -> chat_id -> contact_id
is unneeded overhead.
* show info-messages in destination chat for alice
* fingerprint_equals_sender() returns Err on database failure
* tweak documentation
* clarify what an 'unfinished tasks' task is.
* add regression test for create_for_contact_with_blocked()
* rename Blocked::Manually to better fitting Blocked::Yes
* tweak test_secure_join() and make sure, Alice and Bob have only on chat after a group-join
* add basic multi-device-sync functions
* generate json
* add context.parse_sync_items()
* add context.execute_sync_items()
* piggyback sync-commands message, add body for human-readable part
* avoid double json renderings
* mimeparser parses incoming .json sync-files
* do not piggyback sync-files
* execute sync items
* return status of send_sync_msg()
* send sync messages as multipart/report
* add a per-item-timestamp and also allow adding other per-item-fields in the future
* if the self-chat does not exist, create it blocked/hidden
* create tokens closer to real qr-code needs
* respect bcc_self setting, add test for that
* sync qr code tokens after promoting groups
* send sync-messages only if an experimental switch is set
* trigger send_sync_msg() after sending messages and after creating/redraw/revive qr-code
* add DC_STR_* constants to deltachat.h
* adapt to refactored qr module as of #2729
* tweak test
* use SendSyncMsgs config name instead of SendExperimentalSyncMsgs - we can remove or rename the config nevertheless, but have the option to keep it without renaming
* tweak docs
* remove currently unused effective timestamp calculation
* clarify when send_sync_msg() is called
* make sure, sync-messages are encrypted and are sent by SELF
* tweak docs, fix typos
* Add DC_EVENT_SELFAVATAR_CHANGED
* Add test.
Unfortunately I can't easily also test that the avatar is not copied
from unencrypted messages:
In the second encrypted message, the avatar would not be sent again
then, because we only send avatars once a day or so.
* Unfortunately I can't easily also test that the avatar is not copied from unencrypted messages:
In the second encrypted message, the avatar would not be sent again
then, because we only send avatars once a day or so.
* add Chattype::Broadcast and create_broadcast_list()
* do not disclose recipients for broadcasts
* allow sending/add-/remove-member for broadcast
* set broadcast subject same as for one-to-one chats
* broadcast-recipient-list does not include SELF
* use special icon for broadcast groups
* generate initial broadcast names
* make clippy happy
* send BCC message unencrypted to avoid unexpected disclosing; encryption is opportunistic anyway. if we have 'protected chats' at some point, we can think that over.
* reword 'To:'-group
* simplify can-send-check
* add broadcast tests
* tweak comments
* Update deltachat-ffi/deltachat.h
Co-authored-by: Hocuri <hocuri@gmx.de>
* change name of can_edit() to is_self_in_chat()
Co-authored-by: Hocuri <hocuri@gmx.de>
* add missing stock strings for connectivity and quota
* reword quota error
* use 'Incoming/Outgoing Messages' instead of 'Inbox/Outbox'
* just say 'Not supported by your provider.' if quota cannot be read.
- the context is already given by the headline
'Storage on domain.org'
- the string is short and does not disturb much
(it is a very common error)
- the string does not mention 'quota' as such,
which will be hard to translate ('Kontingentsinformationen') -
even if ppl as we know about the Quota extensions an such things.
there was also the idea to hide the whole section,
however, that is confusing in a multi-device-usage
when things are sometimes shown and sometimes not.
before, MsgsChanged(chat_id, new_msg_id) was emitted,
but that does not cover the deleted message.
in theory, we could emit both,
however, that would just be a waste of refresh in uis.
also before, events were used this way,
however, also the documentations are updated to
reflect reality better.
