Since #8350 (2026-09-09) deltachat-jsonrpc-bindings build-depends
on deltachat-jsonrpc, so clippy, nextest and the doctests,
which select the whole workspace, compiled core
and its whole dependency tree a second time for the host.
The lint job also checked every dependency twice, once per panic strategy,
and repeated clippy's checks in a separate all-features `cargo check`.
With a warm cache on 4 CPUs on my machine, the lint job drops
from 150 to 60 seconds and the tests build
from 100 to 75 seconds.
Peak memory falls for lint from
5.1 to 3.5 GiB and for tests
7.5 to 5.4 GiB.
RPC server subprocess may exit for various reasons,
e.g. because of panic or because of debug_assert! during testing,
or because the process is killed manually or by OOM killer.
We still want to shutdown all threads cleanly in this case
and not fail in Rpc.close(). Otherwise Python process cannot exit
as it waits forever for all threads to terminate.
Without the fix, when added test is run in pytest,
pytest prints "ERROR at teardown of test_shutdown" and gets stuck.
When pytest is manually terminated with ^C, the following error is printed:
```
Exception ignored while joining a thread in _thread._shutdown():
Traceback (most recent call last):
File "/usr/lib/python3.14/threading.py", line 1583, in _shutdown
_thread_shutdown()
KeyboardInterrupt:
```
_thread_shutdown() is the function waiting for all non-daemon threads to finish.
Previously, when we disconnected from the current transport, we forgot
to reset the `transport_id` and `from`. I couldn't find any bug that is caused by
this today, but it was a lingering problem.
`ImageReader::with_guessed_format()` returns I/O errors, meaning the file is likely not readable.
If we wanted to check for the case when file format was not guessed,
the correct way would be to check if imgreader.format() returns `None`.
All the widely used formats (JPEG, PNG, GIF, WebP) are guessable from the first bytes,
so the code is not worth fixing as we cannot test it.
We already have context for HTTP(S) "CONNECT" command failures,
"Failed to connect to SOCKS5 proxy" and "Failed to connect to Shadowsocks proxy",
but when TCP connection to HTTP(S) fails the error is bubbled up as is.
This resulted in confusing "All connection attempts failed: Connection to host:port failed: ..." error
when configuring a relay, without any indication that "host:port" is the proxy address.
This factors out all MDN-related code that was previously inside `MimeFactory`
into a `mimefactory::mdn` function that constructs `QueuedMail` directly,
similarly to `mimefactory::keyupdate_message`.
Removing MDN-related code from MimeFactory also means that MimeFactory only handles non-MDN messages now
and we don't have to `match` on `MimeFactory.loaded` everywhere to access `msg` and `chat`.
Unlike `MimeFactory::from_mdn`, `mimefactory::mdn` does not need to fill `MimeFactory.from_addr`.
This removes one `get_primary_self_addr()` call. `mimefactory::mdn` also does not need to fill
various fields that are never used for MDNs such as `past_members`.
It looks like the function is only called for File and Image viewtypes,
so there is no way to get into the Sticker branch
that checks the corners for transparency.
A join request is sent to every relay of an inviter, but the answering
inviter device only deleted the copy it downloaded. Another device of the inviter
fetching a different relay later answered the request again, re-adding
members who had left or been removed in the meantime.
this PR makes it easier to spot unwanted "add second device" actions, if
the unlocked device is left unattended and/or a system lock is not in
place (so cannot be checked directly before doing the "add second
device" action).
already today, the sending device gets the message "ℹ️ Profile
transferred to your second device", which, however, can be deleted.
with this PR, if the message is deleted soon after the transfer, it
first looks as if this was successful. however, the message is re-added
later, at the first housekeeping at least an hour after the transfer.
deleting the message after that is final, so users can still get rid of
it.
It is clear that this does not catch all eventualities, it is
best-effort. e.g. it is known that subsequent "add second device"
attempts remove checks of previous ones.
First line of defense is device locking and asking for secret explicitly
before adding a second device.
previous discussions about that at
https://github.com/chatmail/core/issues/4303
Paths in deltachat.pc are passed via env variables to build.rs. With
this fix, the pc will be regenerated if these env variables change.
This came up when building via CMake: the paths depend on
CMAKE_INSTALL_PREFIX, if the CMAKE_INSTALL_PREFIX changes during a
reconfigure, deltachat.pc should have the corresponding paths adjusted.
This PR fixes how addresses in securejoin invite codes (i.e. QR codes
and invite links) are percent-encoded.
Before this PR,
- `@` in the addresses was percent-encoded. This makes the invite code
harder to read, and is not necessary; at least, every software we tested
correctly handled links that contain `@` (Signal, WhatsApp, Telegram,
Thunderbird, Delta Chat on Android, iOS, and Desktop)
- _But_, the first address in the `r=` parameter of a securejoin link
was not percent-encoded at all. This was a sneaky bug caused by using
the `reduce` function; I always find it hard to follow code that uses
`reduce` (and similar functions like `fold`), and apparently others have
the same problem since neither @j-g00da nor @link2xt noticed the problem
when implementing & reviewing the PR that introduced the bug.
With this PR:
- `@` is allowed in addresses in securejoin invite codes
- all addresses are percent-encoded
- `reduced` is not used anymore
---------
Co-authored-by: l <link2xt@testrun.org>
Stop logging the time migration takes
and don't log anything when migration runs on a fresh database
and only creates empty tables.
Without these changes every time profile is created,
the following info lines are logged:
src/sql/migrations.rs:35: Starting key-contact transition.
src/sql/migrations.rs:82: Not yet configured, no need to migrate key-contacts
src/sql/migrations.rs:1942: key-contacts migration took 1.143721ms in total.
This is not a correct way to reset the database, it does not even clear the transports table
so account stays configured. If someone needs a fresh database, then REPL should be restarted
with a new path.
Users downgrading to UIs that load legacy config values is unlikely,
and cannot work correctly with multiple transports.
BREAKING CHANGE: core does not set deprecated config values `addr`, `mail_pw` etc. Use `list_transports()` API instead.
This adds two tests for rendering unencrypted messages.
As a follow-up to,
https://github.com/chatmail/core/pull/8543#issuecomment-5207509885, I
would like to make sure that sensitive headers don't go into unencrypted
messages. While looking into this, I noticed that we don't have any
tests at all yet that test how exactly an unencrypted message is
rendered, only for specific parts.
Right now, we're sending `Chat-Disposition-Notification-To:
alice@example.org` in unencrypted messages, I think it should be
removed, I'll make a follow-up PR with a whitelist of allowed
unencrypted headers.
We don't look at the address in OPENPGP4FPR QR codes anymore.
If we cannot find a contact by fingerprint,
then we return an error without trying to look up
the contact by address.
Scanning OPENPGP4FPR can now only return FprOk
if matching key-contact is found, or an error.
BREAKING CHANGE: removed DC_QR_FPR_WITHOUT_ADDR and DC_QR_FPR_MISMATCH constants from CFFI
BREAKING CHANGE: removed FprWithoutAddr and FprMismatch variants from JSON-RPC QrObject returned by check_qr
holger krekel
link2xt
Hocuri
dependabot[bot]
biørn
d2weber
missytake