* store msg-id in msg-object on set_draft(), add a test for that
* test deleting drafts
* keep draft-ids on updating drafts, set draft-state
* do not allow forwarding of drafts
in general, it should be possbile,
however, it is not needed.
drafts and forwarding have lots of cornercases
even when not used in combination :)
* keep draft-ids on preparing and sending
* add comments about keeping msg_id
* early exit when trying to forward drafts
* tweak tests
* get rid of old C to Rust conversion code
* allow soon checking of increation-state, add a test for that
* we no longer set a draft on group creation
* remove probably outdated comment
the comment was added at
https://github.com/deltachat/deltachat-core/pull/457
where draft revamping was done half only
and was probably forgotten to being removed later.
at least, i cannot make any sense out of the comment.
unknown keys may come from upgrades (previously used key no longer defined)
or from downgrades (when an upgrade before uses a new key).
the latter was probalby responsible for some avatar loss,
mainly by testers, that usually switch versions forth and back much more often.
* fix missing MX resolver eg. on android
switching completely to /etc/resolv.conf (see #2780)
does not work at least on some Androids
(see https://github.com/deltachat/deltachat-android/issues/2151 )
therefore, we use the old approach as a fallback.
* log a warning, when we again have problems with figuring out MX resolvers
* test adding members in a multi-device setup
* fix system messages for multi-device-setup
* enhance test to check multi-device messages for removing-members and group-renames
* repl: allow groupname arguments with more than one word (came over that when testing qr codes)
* calcualte text-size from the real number of lines
* shift text and watermark apart when text get longer
* make clippy happy
* test one-to-one chats on setup-contact/secure-join
only one chat is created after scanning a QR code:
- on setup-contact, one-to-ones are created on both sided
- on secure-join, the joined group chat is created;
one-to-ones are not created intitally,
but should become visible on receiving messages
* make sure, Alice creates the chat with Bob on setup-contact
not totally sure if that change in #2508 was on-purpose,
however, all yet released versions
did create the one-to-one chat also on the Inviter's (Alice) side,
so, let's stay with that,
i do not see many reasons to change that.
* unblock hidden (Blocked::Yes) one-to-one chats
one-to-one chats may be hidden by secure-join,
in case someone later writes a message to it
(not unlikely), the chat needs to be shown.
before, messages are just not shown,
the corresponding chat did not appear.
the 'Blocked' wording of a 'Chat' must not be mixed with the
'Blocking' of a contact. 'Chat-Blocking' is mostly a visibility thing,
that may change as messages come in.
this change should not affect _really_ blocked contacts -
they are filtered out already before
and their messages are usually not even downloaded.
also, before allow_creation is checked,
that may disallow chat creation for show_emails reasons.
all in all, it just does the same
as if the user has manualy deleted the chat before and it would be created.
* simplify test
* refactor: cleanup send_handshake_msg()
- rename to send_alice_handshake_msg() as used by Alice only
- remove dead code from Bob
(Bob's code is at BobState::send_handshake_message() since some time)
- take a contact_id and not a chat_id;
this makes things less confusing when
info-messages are put to the final group chat
* always directly return chat-id from dc_join_securejoin()
* take care not to create a group twice
* adapt documentation
* add info-msg on group invites; add inviter directly after creation
* document existing 'joinqr' command in repl tool
* do not create empty one-to-one chats for group-joins
* refactor: cleanup fingerprint_equals_sender()
- the function takes a contact_id directly now.
before it consumes the first contact of a one-to-one chat -
which may be easily confused with the group-chat in creation.
moreover, the conversion contact_id -> chat_id -> contact_id
is unneeded overhead.
* show info-messages in destination chat for alice
* fingerprint_equals_sender() returns Err on database failure
* tweak documentation
* clarify what an 'unfinished tasks' task is.
* add regression test for create_for_contact_with_blocked()
* rename Blocked::Manually to better fitting Blocked::Yes
* tweak test_secure_join() and make sure, Alice and Bob have only on chat after a group-join
* add basic multi-device-sync functions
* generate json
* add context.parse_sync_items()
* add context.execute_sync_items()
* piggyback sync-commands message, add body for human-readable part
* avoid double json renderings
* mimeparser parses incoming .json sync-files
* do not piggyback sync-files
* execute sync items
* return status of send_sync_msg()
* send sync messages as multipart/report
* add a per-item-timestamp and also allow adding other per-item-fields in the future
* if the self-chat does not exist, create it blocked/hidden
* create tokens closer to real qr-code needs
* respect bcc_self setting, add test for that
* sync qr code tokens after promoting groups
* send sync-messages only if an experimental switch is set
* trigger send_sync_msg() after sending messages and after creating/redraw/revive qr-code
* add DC_STR_* constants to deltachat.h
* adapt to refactored qr module as of #2729
* tweak test
* use SendSyncMsgs config name instead of SendExperimentalSyncMsgs - we can remove or rename the config nevertheless, but have the option to keep it without renaming
* tweak docs
* remove currently unused effective timestamp calculation
* clarify when send_sync_msg() is called
* make sure, sync-messages are encrypted and are sent by SELF
* tweak docs, fix typos
* add let's encrypt certificate missing on some older android devices
* create Certificate with Lazy::new()
* document certificate source
* use smaller *.der format instead of *.pem
* better readable enum
* add a failing test
* let new secure-joins abort existing ones
before, a stale secure-join or setup-contact
made the whole qr-scanning unusable until
the app is restarted,
resulting in "QR process failed" errors.
this commit fixes the issue by
aborting existing scans -
in cases, a user really wants two concurrect joins running,
this is not perfect, but that did not worked before as well.
* remove unused AlreadyRunning variant
* make clippy happy
* add Chattype::Broadcast and create_broadcast_list()
* do not disclose recipients for broadcasts
* allow sending/add-/remove-member for broadcast
* set broadcast subject same as for one-to-one chats
* broadcast-recipient-list does not include SELF
* use special icon for broadcast groups
* generate initial broadcast names
* make clippy happy
* send BCC message unencrypted to avoid unexpected disclosing; encryption is opportunistic anyway. if we have 'protected chats' at some point, we can think that over.
* reword 'To:'-group
* simplify can-send-check
* add broadcast tests
* tweak comments
* Update deltachat-ffi/deltachat.h
Co-authored-by: Hocuri <hocuri@gmx.de>
* change name of can_edit() to is_self_in_chat()
Co-authored-by: Hocuri <hocuri@gmx.de>
this is needed for targeting "non-blocking group QR joins"
as create_multiuser_record() would also be needed from other places.
this will make rebasing/rewriting and finally reviewing #2508 easier.
in the past, group-messages were marked as "read by recipient"
only when at least 50% of the group members have send a read receipt -
in practise, this does happen never or much too late esp. in larger groups.
setting the state OutMdnRcvd already on the first read-receipt
seems to be much more intuitive and useful as you at least know
one person has read the message.
this is also what other messengers as telegram are doing here.
moreover, this fixes a bug that did not add all read-receipts
to the "Info" screen - once "enough" read-receipts were received,
and the state was already set to OutMdnRcvd, subsequent read-receipts
were ignored.
probably because the "Info" screen did not show the read-receipts since forever -
and for the second tick, the addutional read-receipts are not needed.
* let quota-warning reappear after import
an import removes all device-messages,
including the quota warning.
resetting `Config::QuotaExceeding` makes sure,
the warning reappears soon after import -
otherwise the warning would reappear only after
storage is cleaned up and exceeds again.
* a second quota warning when 95% storage exceeded
* factor out warning-check and add a test for that
* add missing stock strings for connectivity and quota
* reword quota error
* use 'Incoming/Outgoing Messages' instead of 'Inbox/Outbox'
* just say 'Not supported by your provider.' if quota cannot be read.
- the context is already given by the headline
'Storage on domain.org'
- the string is short and does not disturb much
(it is a very common error)
- the string does not mention 'quota' as such,
which will be hard to translate ('Kontingentsinformationen') -
even if ppl as we know about the Quota extensions an such things.
there was also the idea to hide the whole section,
however, that is confusing in a multi-device-usage
when things are sometimes shown and sometimes not.
before, MsgsChanged(chat_id, new_msg_id) was emitted,
but that does not cover the deleted message.
in theory, we could emit both,
however, that would just be a waste of refresh in uis.
also before, events were used this way,
however, also the documentations are updated to
reflect reality better.
* add a test for xing mailinglists
* strip long hash-prefixes from mailinglist name if we got the name from the List-Id as a last resort
* add a test for newsletter@ mailinglists
these mailinglists have the list-name in `From:`
and can be detected by addresses starting with `newsletter@`.
* if not list-name is set, use the `From:` name for addresses starting with `newsletter@`
this is similar to what we do with `notifications@`
* Update src/dc_receive_imf.rs
Co-authored-by: Hocuri <hocuri@gmx.de>
* add an example to the regex
Co-authored-by: Hocuri <hocuri@gmx.de>
* draft a download-api
* basic implementation
* allow partial downloads for protected chats
* use a separate column for download_state
* force a minimal timeout for delete_server_after in combination with partial messages
* add a warning if a possible download may expire by delete_server_after
* test load_imap_deletion_msgid()
* add a test for a partial download
* improve documentation and visibility
* let get_download_limit() return Result<Option>
* rusty getters
* apply MIN_DELETE_SERVER_AFTER to shown availability time
* move stub-creation to download.rs, use stock-strings, nicer logging
* make clippy happy (cargo clippy --tests)
* refine tests and comments
* fix typo
* remove superfluous closure in ffi
* respect partial_download for immediately scheduled DeleteMsgOnImap jobs
* add a test for .xt.local mailinglists
* get correct names of .xt.local mailinglists
these mailinglist probably come from the xt:Commerce system
and are pretty widely used.
i have not seen an .xt.local mailinglist with name set in List-Id,
however, if that happens, it will still be taken.
only if the name is unset,
we use the name from the From-header.
* check update timestamps for signatures, user-avatars, ephemeral-settings, last-subject
* check update timestamp for group-avatars
* check update timestamp for group-names
* check update timestamp for memberlist
* check update timestamp for protection-settings
* add a more advanced test
* add another more advanced test
* set last-subject-timestamp more carefully
* bubble up errros from set_*timestamp() and check for from_id==0 before
* simplify Params::set_i64()
* remove comment that is more confusing than helpful
* use update_timestamp() wording consistently
* resultify update_recent_quota()
* add a device-message if quota exceeds QUOTA_WARN_THRESHOLD_PERCENTAGE
* check if a quota warning should be added during housekeeping, this is at least once a day
* dc_get_config("quota_exceeding") is useful for bots
* make clippy happy
* reword QuotaExceedingMsgBody message
* avoid lots of warnings if quota jitters around the warning threshold
* allow clippy::assertions_on_constants
these constants depend on each other, it makes sense to check that they are not changed in an incompatible way
the 'device chat about' was shown as a single message
as at that time, there was just not 'status'.
meanwhile, we have the status option,
and it feels much more natural to get the information there,
esp. as the subtitle on all UIs already read
'Messages in this chat are generated locally' -
and a tap on that will show the hint, without scrolling or so.
this also teaches the user where to find such information -
and the "welcome" chat is less spammy and really starts with the text
"Welcome to Delta Chat!"
* allow dotless domains and hostnames
* update provider database
ran ./src/provider/update.py ../provider-db/_providers/ > src/provider/data.rs
to pull in recent changes from https://github.com/deltachat/provider-db
* add imap::get_quota_roots()
* schedule quote-checking job on getting connectivity-html
* get quota and debug print it
* basic quota output
* update quota at most once per minute, emit event on changes
* use more meaningful names
* add some comments, move update_recent_quota() to quota.rs
* show root name only if there are several roots
* make clippy happy, some refactorings
* allow only one update-quota job per time
* add now supported QUOTA to standards.md
the WAL files come from sqlite WAL mode,
they have the same name as the database file with an extra `-wal` suffix.
according to https://sqlite.org/wal.html#the_wal_file ,
the WAL file is part of the persistent state of the database
and should be kept with the database if the database is copied or moved.
"Archived Chats" also contain old contact requests now
(an maybe new one if the user archives them),
so, there may be easily some thousands chats in "Archived Chats" -
and the count has no real meaning to the user,
esp. as we not even display the number of "Real Chats".
Might be that this "Link" will go away anyway sooner or later,
however, for now, it is just fine to remove the badge counter.
* add a test for archived requests
* fix archived requests
* move requests but the last one to "Archived Chats"
this way, the app looks familiar after the contact request upgrade.
the subselect was copied from the old get_last_deaddrop_fresh_msg()
(which was removed by the contact request upgrade #2514)
* just move all old requests to "Archived Chats"
ux-wise, the advantage of keeping the last one is questionable,
one may think, always the last one is shown in chatlist.
showing _all_ fresh request is not doable
as past cores did not really take care of that
and the db-state is not consistent in that regard.
that would make the already complicated code even more complicated,
so we decided to go the easy way.
* escape strings added to html
* use more common emojis for connectivity report
all emojis are from 2010 and older now.
an alternative would have been to use css,
however, that may have other issues
and as the whole report is subject to change anyway,
i go for the easy solution.
* use 'modern' meta pattern, remove unused div and styles
* use css instead emojis; looks better that way
also, we have the same look on all systems.
* add connectivity command to repl tool
in most (all?) UIs, import/export works on an already created account,
so, dc_accounts_import_account() does not really help here -
but adds some noise and confusion
eg. as for the other dc_accounts_t functions,
the corrsponding dc_context_t functions must not be called.
if really a new account is required for import,
it seems to be easier to call add_account() before import.
as by reviving qr codes,
there may be more than one token for a chat,
ensure, the most recent token and only one token is returned
by the sql-command for looking up tokens
(used for generating new codes)
B. Petersen
