* escape strings added to html
* use more common emojis for connectivity report
all emojis are from 2010 and older now.
an alternative would have been to use css,
however, that may have other issues
and as the whole report is subject to change anyway,
i go for the easy solution.
* use 'modern' meta pattern, remove unused div and styles
* use css instead emojis; looks better that way
also, we have the same look on all systems.
* add connectivity command to repl tool
fix https://github.com/deltachat/deltachat-core-rust/issues/2463fix#2116
The email could be private (i.e. only sent to me) or non-private (i.e. also sent to sb else). Also, it could be a classical email or a chat message. Below, I'm describing for each of the four combinations whether they should be assigned to a chat by create_or_lookup_group() or lookup_chat_by_reply(). Because I needed to use these function names a lot, I shortened them to l:group() and l:by_reply() in this PR description.
(!) means todo, (! -> Done) means I fixed something.
## Private classical email:
l:group() and l:by_reply() must both take care not to put it into group
l:group() no (! -> Done), l:by_reply no (! -> Done)
except for classical MUA replies to two-member-groups, they should be put into the parent group
### wrt alias-support:
A private classical email is very probably not going to be an answer to email that went to an alias address:
Suppose Alice writes to support@example.com.
support@example.com forwards to bob@example.com and claire@example.com.
When Bob answers, he will _probably_ answer `To: alice@example.com, support@example.com` (=> it's a non-private classical email).
With this PR, if he does only answer `To: alice@example.com`, (=> it's a private classical email), Alice's DC will show the answer in the private chat with Bob. Which actually makes more sense than showing it in the support@example.com chat I think. Also, if it was shown in the support@example.com chat, then Alice would answer in the support@example.com chat, then Claire would get Alice's message but not Bob's and therefore miss some context.
That being said - **I could change this**. Pretty easily actually, I would just have to remove the call to `is_probably_private_reply()` from `lookup_chat_by_reply()`. Didn't think through all edge cases yet, but should work.
## Private chat message:
l:group() has to put private chat messages into the group: It won't mistakenly put a message there (because it can rely on Chat-Group-Id). Currently, `is_probably_private_reply()` returns true for private chat messages, but l:group still has to put them into the group chat. (it's not nice that the function called is_probably_private_reply returns true for all private chat messages, but I didn't find any nicer solution) l:by_reply() must not assign it to sth special
l:group yes, l:by_reply no
By the way, for chat messages, `try_getting_grpid()` doesn't look at InReplyTo or References, in order not to put private chat-message replies into the group chat.
For alias-support, the same goes as for the private classical emails.
## Non-private classical email:
Just put it into any group, and if there is none, create one.
_Off-topic:
We currently don't look at the recipients lists, which means that a message can easily be assigned to a group although it was not sent to all group members. One day we could somehow compare the recipients list with the members list, but that needs some more discussing (esp. what do we do if they don't match? Create a new group? Show a hint in the UI?) and is nothing for a bug-fixing PR like this one._
l_group yes, l_by_reply yes, even for outgoing messages (! -> Done, this also was the issue reported by @gerryfrancis in the testing group:
Outgoing messages were not put into a chat by In-Reply-To/References, which is correct for chat messages, but for non-private classical outgoing emails, a new ad-hoc group was created everytime.
So, I added this: https://github.com/deltachat/deltachat-core-rust/pull/2465/files#diff-e7606b521f6710ddc6e5236ba5d7eefc917b7ad744b9e71762fd42830c55485bR703-R711)
## Non-private chat message:
Can be put into chat by l:by_reply() because it must be a group message
l:group yes, l:by_reply yes (to make alias support work if the support person uses DC)
Nothing to test or fix here; we have to put chat group messages into the group, which is trivial. And we have to make sure that alias-support works, which already was well tested.
* changelog: update to include prevous changes
and use new format/structure
* changelog: capitalize API
* changelog: add a missing pr refernece
* Apply suggestions from code review
Co-authored-by: Hocuri <hocuri@gmx.de>
Co-authored-by: Hocuri <hocuri@gmx.de>
See https://support.delta.chat/t/discussion-how-to-show-error-states/1363/10 <!-- comment -->
It turns out that it's pretty easy to distinguish between lots of states (currently Error/NotConnected, Connecting…, Getting new messages… and Connected). What's not that easy is distinguishing between an actual error and no network, because if the server just doesn't respond, it could mean that we don't have network or that we are trying ipv6, but only ipv4 works.
**WRT debouncing:**
Sending of EVENT_CONNECTIVITY_CHANGED is not debounced, but emitted every time one of the 3 threads (Inbox, Mvbox and Sentbox) has a network error, starts fetching data, or is done fetching data.
This means that it is emitted:
- 9 times when dc_maybe_network() is called or we get network connection
- 12 times when we lose network connection
Some measurements: dc_get_connectivity() takes a little more than 1ms (in my measurements back in March), dc_get_connectivity_html() takes 10-20ms. This means that it's no immmediate problem to call them very often, might increase battery drain though. For the UI it may be a lot of work to update the title everytime; at least Android is smart enough to update the title only once.
Possible problems (we don't have to worry about them now I think):
- Due to the scan_folders feature, if the user has lots of folders, the state could be "Connecting..." for quite a long time, generally DC seemed a little unresponsive to me because it took so long for "Connecting..." to go away. Telegram has a state "Updating..." that sometimes comes after "Connecting...".
To be done in other PRs:
- Better handle the case that the password was changed on the server and authenticating fails, see https://github.com/deltachat/deltachat-core-rust/issues/1923 and https://github.com/deltachat/deltachat-core-rust/issues/1768
- maybe event debouncing (except for "Connected" connectivity events)
fix https://github.com/deltachat/deltachat-android/issues/1760
in most (all?) UIs, import/export works on an already created account,
so, dc_accounts_import_account() does not really help here -
but adds some noise and confusion
eg. as for the other dc_accounts_t functions,
the corrsponding dc_context_t functions must not be called.
if really a new account is required for import,
it seems to be easier to call add_account() before import.
Do not process names, avatars, location XMLs, message signature
etc. for duplicate messages.
Previously only `add_parts` was stopped early, but not
`dc_receive_imf`. Also, `dc_receive_imf` processed From: and To:
fields and applied names to contacts even before checking the
Message-ID.
Fake Message-ID generation procedure is changed to operate on raw
header values to avoid interacting with the database.
as by reviving qr codes,
there may be more than one token for a chat,
ensure, the most recent token and only one token is returned
by the sql-command for looking up tokens
(used for generating new codes)
Raw MIME messages may contain non-ASCII characters. Attempting to
store them as TEXT by using String::from_utf8_lossy results in
non-ASCII characters being replaced with Unicode U+FFFD "REPLACEMENT
CHARACTER" which is later incorrectly decoded when attempting to parse
`mime_headers` content into HTML.
Normally they should not end up in contact requests, but if they do,
we want to show them. Otherwise it is completely impossible to see
them until the chat is moved out of contact requests.
Previously chats created by outgoing classic emails went into contact
requests (deaddrop). Outgoing messages are not shown in contact
requests, so created chat was not shown anywhere. With this fix chat
is created both for outgoing classic emails and outgoing chat emails.
Since classical messages are not deleted when show_emails setting is
set to "0" and remain in the database, they should be shown
somewhere. Otherwise they may reappear later when the setting is
enabled again.
New `dc_msg_is_bot()` C API and corresponding `Message.is_bot()`
Python API can be used to check if incoming message is sent by a bot,
e.g. to avoid two echo bots replying indefinitely to each other.
"Bot" flag is not set for outgoing messages, but may be set for
BCC-self messages. For now documentation says that `dc_msg_is_bot()`
return value is unspecified for outgoing messages. It can be better
specified later if needed for specific applications, e.g. sharing an
account with a helper bot.
the default account created by dc_accounts_new()
is annoying when doing a migrate/import account;
in this case, you must not forget to remove the default account.
in between you have two account,
and accounts are swiched.
it seems to be better
to just call add_account() on a new account object as needed.
