mirror of
https://github.com/espressif/esp-idf.git
synced 2026-09-22 13:01:16 +03:00
3dfd8f0154
ESP32-S31 uses the same trace encoder IP as ESP32-P4. Of the E-Trace v2.0 parameters the two targets report, only privilege_width_p differs (1 on P4, 2 on S31), and it affects both the sync packet layout and the filter's privilege selector. - Add the SOC_RISCV_TRACE_* caps for ESP32-S31 along with the esp32s31 LL, and declare TRACE0/TRACE1 in the target's trace_struct.h. - Carry privilege_width_p as SOC_RISCV_TRACE_PRIV_WIDTH so the sync packet decoder can locate the address field, which starts one bit later on targets that implement supervisor mode. - Use the RISC-V architectural privilege encoding (0 user, 1 supervisor, 3 machine) in the public filter enum so the values do not change per target, and let each LL narrow them to its own register field. - Add riscv_trace_ll_priv_is_supported() per target, so a privilege level the selector cannot represent is rejected with ESP_ERR_NOT_SUPPORTED rather than being silently narrowed to a different level. It lives next to the narrowing code so the two cannot drift apart. - Fix trace buffer allocation on targets whose internal RAM is not reached through a cache. esp_cache_get_alignment() reports 0 there, which underflowed the size check and failed every allocation. Align base and size to the larger of the reported cache line and the encoder's 4-byte write granularity.