Let panic-related components register their hooks through
esp_sys_event so panic sequencing stays extensible without
hardcoded esp_system dependencies.
Moved the linux spinlock.h stub into esp_hw_support/include/linux.
esp_hw_support's INCLUDE_DIRS already places include/linux before
include, so the correct include files are picked up for the linux
target.
- Drop the FreeRTOS-Kernel-SMP linux spinlock.h duplicate.
- rv_decode_test: use PRIV_REQUIRES esp_hw_support instead of
hardcoding component include paths.
Wrap MWDT-related code under SOC_WDT_SUPPORTED so targets without a main
watchdog can compile.
Add SOC_RTC_WDT_SUPPORTED for RTC watchdog usage (bootloader, slow-clock
paths) and regenerate Kconfig.soc_caps.in. Bootloader RWDT setup stays
under SOC_RTC_WDT_SUPPORTED; MWDT flashboot teardown stays under
SOC_WDT_SUPPORTED.
ESP_INT_WDT, ESP_TASK_WDT_EN, and BOOTLOADER_WDT_ENABLE depend on
SOC_WDT_SUPPORTED where applicable. Build xt_wdt.c only when
SOC_XT_WDT_SUPPORTED. Provide no-op panic WDT helpers when
SOC_WDT_SUPPORTED is disabled.
- Remove GPTIMER and TIMG related definitions from soc_caps_full.h files
- Move timer peripheral definitions to appropriate HAL layer files
- Update references across components to use proper HAL abstractions
- Consolidate timer group and GPTIMER capabilities organization
- Ensure consistent timer configuration across all ESP32 variants
This refactoring improves the separation of concerns between SOC
capabilities and HAL implementations for timer-related functionality.
'running' - task that was running when execution stopped
'selected' - task that was selected by used in GDB (command "thread <id>")
Note that initially, after the program is interrupted 'selected' == 'running'
This commit renames all registers in xtensa/specreg.h to by adding the
prefix XT_REG_. This is done to avoid naming collisions with similar
variable names. A new register file, viz., xt_specreg.h is created. The
previous names are still available to use but have been deprecated.
Closes https://github.com/espressif/esp-idf/issues/12723
Merges https://github.com/espressif/esp-idf/pull/16040
This commit updates the Panic handler behavior Kconfig setting to make
the GDBStub on Panic (CONFIG_ESP_SYSTEM_PANIC_GDBSTUB) option to be only
available when esp_gdbstub is part of the component list of the build.
Closes https://github.com/espressif/esp-idf/issues/13218
For C6/H2/P4/C5, there is no SoC specific debug range. Instead the same
address range is part of CPU Subsystem range which contains debug mode
specific code and interrupt config registers (CLINT, PLIC etc.).
For now the PMP entry is provided with RWX permission for both machine
and user mode but we can save this entry and allow the access to only
machine mode for this range.
For P4/C5 case, this PMP entry can have RW permission as the debug mode
specific code is not present in this memory range.
This commit deprecates the "freertos/xtensa_context.h" and "xtensa/xtensa_context.h"
include paths. Users should use "xtensa_context.h" instead.
- Replace legacy include paths
- Removed some unnecessary includes of "xtensa_api.h"
- Add warning to compatibility header
This commit deprecates xTaskGetAffinity(), xTaskGetCurrentTaskHandleForCPU()
and xTaskGetIdleTaskHandleForCPU() APIs for IDF-FreeRTOS kernel.
Instead, users are directed to use alternatives. All other
components in IDF using these functions have been updated accordingly.
* All components which won't build (yet) on Linux are excluded.
This enables switching to Linux in an application without
explicitly setting COMPONENTS to main in the main
CMakeLists.txt.
* ESP Timer provides headers for Linux now
* automatically disabling LWIP in Kconfig if it is not available
doc(linux): brought section
"Component Linux/Mock Support Overview" up to date
This commit adds `pvTaskGetCurrentTCBForCore()` to get a void pointer to the
current TCB of a particular core. This removes the need to `extern `pxCurrentTCB`
in esp_gdbstub.
Task snapshot API were never intended to be called from user code. This commit
makes task snapshot a private API thus moves `#include "freertos/task_snapshot.h"`
to `#include "esp_private/freertos_debug.h"`.
Task snapshot related Kconfig options have also been hidden.
Note: Added 'freertos_common' mapping to ldgen mapping execptions lists due to
inlining of 'freertos_debug.h' functions.
This commit adds beta support for the FreeRTOS v10.5.1 kernel which can be
enabled by enabling the CONFIG_FREERTOS_USE_KERNEL_10_5_1 option.
The following changes have been made:
- Updated freertos/CMakeLists.txt to build v10.5.1 kernel with v10.4.3. ports
- Updated existing Xtensa and RISC-V ports to work with V10.5.1
- Modifications to other ESP-IDF components to work with v10.5.1
- Added some ESP-IDF specific tracing changes to v10.5.1 kernel
- Make CONFIG_FREERTOS_USE_KERNEL_10_5_1 a public option
Note: The beta release is missing some minor fixes, performance improvements,
and features. Using this beta release for production is not recommended.
Closes https://github.com/espressif/esp-idf/issues/7137
Previously, Task Snapshot could be conditionally built based on the
CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT option. However, there is no overhead
with always enabling Task Snapshot functions, as the linker will remove any
functions if they are not called.
This commit...
- removes all ESP-IDF dependencies on the CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT
option so that Task Snapshot functions are always available.
- Makes CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT a hidden option to maintain
compatibility with user code.
- adds documentation regarding Task Snapshot.
