- Add nira attr and verification for pasn auth frames
- Refine key clearing and pairing complete logic for pasn verify
- Add NIRA own-service resolution, cached NIK checks, and dynamic
pairing IE construction for bootstrap vs verify paths.
- Replace NAN bootstrap events by private callbacks
Replace nik/nik_valid in wifi_nan_sync_config_t with reset_current_nvs_creds
and use_nvs_for_caching. On NAN start, load the saved own NIK and peer
credentials from NVS (or erase them when reset is requested); generate and
persist a fresh own NIK only when none is valid and caching is enabled.
PASN reuses the SAE module (PWE/crypto and the comeback-token mechanism),
so define CONFIG_SAE whenever SoftAP-SAE or PASN is enabled. This fixes the
undefined references to check_comeback_token()/auth_build_token_req() when
SOFTAP config is disabled.
Use scripts/station_gen_build with -B and -D SDKCONFIG so generate_and_check
does not read the station example's sdkconfig or build tree. Apply
sdkconfig.defaults and IDF_TARGET=esp32 for stable header preprocessing.
Unset GIT_DIR/GIT_INDEX_FILE (and related vars) before git subprocesses so
pre-commit and git worktrees do not mis-resolve paths after cd into scripts/.
1) Add support for MAC randomization in Active scan and connect
2) Add support for randomizaton of sequence numbers
3) Add support for randomization of dialog token for GAS frames
- Route NAN pairing bootstrap via NPBA receive path
- extend datapath_req wait time to fit secured M1-M4 handshake
- Plug ND-PMK derived from KDK into NDP
- prefers paired-peer cached ND-PMK (from PASN pairing complete), when available
- carry ND-PMK metadata in pairing install callback
- Extend PASN key-installed callback payload to include role, mapped NDP CSID
and derived ND-PMK so the NAN layer can populate paired-peer security cache.
Co-authored-by: Akshat Agrawal <akshat.agrawal@espressif.com>
Co-authored-by: Sarvesh Bodakhe <sarvesh.bodakhe@espressif.com>
- Add container struct for internal extra params for follow-up
- Support for parsing Shared Key Desc in Pairing follow-up
- Implement NAN Pairing API's with required parameters
- In KeyData set cipher_ver to 0, Key Info to 0x12C8
(AKM-defined | Pairwise | Install | ACK |
Secure | Encrypted Key Data) for iOS compatibility
- Move NAN PASN into esp_nan_supplicant.c, move declarations
to esp_private/esp_supp_nan.h
- Align PASN/ND-PMK derivation with hostap
Co-authored-by: Sajia <sajia.ali@espressif.com>
Co-authored-by: Akshat Agrawal <akshat.agrawal@espressif.com>
Co-authored-by: Sarvesh Bodakhe <sarvesh.bodakhe@espressif.com>
- Create pasn module from upstream. Changes till 1a791e9c
- Add ecdh prime len api to MbedTLS port
- Integrate nan and pasn modules for PIN code method
- Fix KCK length and add auth timeout
- Add NAN Pairing PASN support
- Implement the bootstrapping handshake phase of NAN pairing (spec 7.6.4.1).
- Add pairing support to NAN Publish/Subscribe APIs:
- Add dummy NIRA , MME Attributes
security_cfg in wifi_nan_publish_cfg_t / wifi_nan_subscribe_cfg_t is a
large struct; pass it by pointer so callers don't bloat their cfg copy.
Driver deep-copies during publish/subscribe, so caller may free right
after the API returns. Add NULL-check when security_reqd is set.
Update both example apps to declare a local security_cfg and assign its
address. Add help text on EXAMPLE_NAN_SECURITY_ENABLED.
- Rename NAN_IPV6_ADDR_ID_LEN / IS_ZERO_NAN_ADDR_ID to ..._IPV6_IDENTIFIER
so the names no longer read like MAC-address constants; drop the
duplicate macro definition in esp_nan.h.
- Replace literal lengths with named macros: WIFI_OUI_LEN for
nan_vendor_ie_t.vendor_oui, and a new WIFI_MAC_ADDR_LEN (private)
applied to the NAN-related structs and callbacks in esp_private/wifi.h.
- Document each callback in struct nan_sync_callbacks and each helper
in struct nan_secure_dp_funcs: when fired / when invoked, what each
argument means, and the matching spec section where useful.
- Note in wifi_nan_datapath_req_t / wifi_nan_datapath_resp_t that they
cover the NCS-SK credential model only; pairing-based cipher suites
(NCS-PK-PASN) install per-peer ND-PMKs via a separate pairing API
without changing these structs. Record why per-NDP credential
injection at response time is not viable: the responder's PMKID
lookup happens at M1 receive time, before the indication event
surfaces to the host.
Replace scalar passphrase/PMK in wifi_nan_discovery_security_params_t
with wifi_nan_credential_t[N] array (cap 4) per Wi-Fi Aware v4.0
§9.5.21.4. Drop public PMKID array and service-level csid_bitmap.
Rename wifi_nan_datapath_security_params_t -> wifi_nan_security_params_t;
add wifi_nan_peer_sdf_security_t for multi-PMKID peer-RX. The
derive_security_params callback takes (svc_name, sec_cfg, out_derived[])
and runs once per credential on the WiFi task. Split nan_record_own_svc
into claim/finalize so the WiFi-task callback finds the pending slot
by name and mirrors derived material — no main-task PBKDF2.
Implement the NAN Data Path encrypted datapath per Wi-Fi Aware v4.0
(§7.1.3.5, §9.5.16):
- Responder + initiator sides of the M1-M4 Shared-Key Descriptor
exchange, with MIC compute/verify, PTK derivation, and PMK/PMKID
derivation via PBKDF2-SHA256 over passphrase or pre-shared PMK.
- CSIA / SCIA attribute build + parse, NCS-SK-128 cipher suite.
- Per-NDL security context on ndl_info::security_ctx; per-svc PMK cache.
- ndp_response_indication callback for initiator peer-NDI binding.
- host<->blob ABI migrated from 27 direct esp_nan_* externs to a single
nan_secure_dp_funcs callback struct in esp_private/wifi.h.
- nan_security.c split out of nan_app.c (~340 lines de-duplicated into
shared M1-M4 helpers).
- CONFIG_ESP_WIFI_NAN_ENCRYPTED_DATAPATH gates the secure path so non-
security builds compile out the crypto/handshake code.
- ROM patch (esp32s31): mask ieee80211_encap_esfbuf to match the
c5/c6/c61 pattern for NAN-capable chips.
Hardening: PMK stack copies zeroized on every return, NDP attribute
parsers bounds-checked, CSID range-checked before shifting, NDL slot
reuse only when handshake state is IDLE, get_csia/scia_len aligned with
their builders on empty input.
API surface: NDP security types moved out of esp_wifi_types_generic.h
into esp_private/wifi.h (internal-only). security pointer dropped from
struct ndp_cb_peer_info. Discovery-side wifi_nan_security_type_t and
the NDP Info callbacks removed (subsumed by csid_bitmap and SSI
respectively).
- Add Country Code, Vendor IE to NAN frames
- Support parsing of multiple availibility & SDA attributes
- Add parsing of service response filter
- Support Bloom filter parsing and generation
- Record peer_svc for nan_indication_cb
- Add support for NDPE Extension attribute
- OWE: clear PRK on HKDF failure; wipe PMK with bin_clear_free; reuse PMK
buffer when size matches.
- 4-way handshake: drop extra OWE check so WPA2-PSK can try the next passphrase.
- SoftAP: simpler OWE key setup and assoc response IEs (skip useless RSNXE step).
