When parsing ND-JSON streams, this is needed to indicate the
point when the ND-JSON stream is considered open, which
occurs just after the last HTTP_EVENT_ON_HEADER.
ND-JSON stream clients cannot rely on the first HTTP_EVENT_ON_DATA,
since that is only triggered by an event, which are optional and
may never be sent, or only sent well after the last HTTP_EVENT_ON_HEADER.
Closes#15952
Fixed memory leak in emac_esp_new_dma function.
Polished ESP EMAC cache management.
Added emac_periph definitions based on SoC features and improved(generalized) ESP EMAC GPIO
initialization.
Added ESP EMAC GPIO reservation.
Added check for frame error condition indicated by EMAC DMA and created a target test.
In esp_eth_test_apps.c:
Add test of loopback functionality. Change speed/duplex/autonegotiation test - remove need to enable loopback (required
for it to work on some phys supported by ESP-IDF)
In Kconfig.projbuild:
Add parameters to select which configuration is used - standard or custom.
Add for custom configuration parameters to select MDC and MDIO pins (required to work with WESP-32 and other boards that
use non-standard pin assignments).
In esp_eth_test_common.c:
Add code to support changes made in Kconfig
In sdkconfig.ci.default_rtl8201:
Change config which is used. Now custom is used and MDC is gpio 16, MDIO is gpio 17. Reuqired to work with WESP-32
In esp_eth_phy_802_3.h:
Make 802.3 API public.
In esp_eth_phy_802_3.c:
Add loopback check in eth_phy_802_3_set_duplex(). Now ESP_ERR_INVALID_STATE is invoked on attempt to set duplex to half
when loopback is enabled.
Remove static property from esp_eth_phy_802_3_autonego_ctrl and esp_eth_phy_802_3_loopback.
In esp_eth_phy_dm9051.c:
Add dm9051_loopback() because DM9051 requires setting additional bit to enable auto-negotiation loopback for data to be
received. Add dm9051_set_speed() which invokes ESP_ERR_INVALID_STATE on attempt to set speed to 10 Mbps when loopback is
enabled because such speed configuration is unsupported.
In esp_eth_phy_ksz80xx.c:
Add ksz80xx_set_speed() which invokes ESP_ERR_INVALID_STATE on attempt to set speed to 10 Mbps when loopback is enabled
because such speed configuration is unsupported.
In esp_eth_phy_ksz8851snl.c:
Change phy_ksz8851_set_duplex() to invoke ESP_ERR_INVALID_STATE on attempt to set duplex to half when loopback is enabled.
In esp_eth_phy_dp83848.c, esp_eth_phy_rtl8201.c:
Add autonego_ctrl implementation which prevents enabling autonegotiation when loopback is enabled.
Add loopback implementation which disables autonegotiation prior to enabling loopback.
In esp_eth_phy_lan87xx.c:
Add autonego_ctrl implementation which prevents enabling autonegotiation when loopback is enabled.
Add loopback implementation which disables autonegotiation prior to enabling loopback.
Fix link indicating being down when loopback is enabled by force setting link up.
Ondrej Kosta
Chen Jichang
Guilherme Ferreira
Fu Hanxi
igor.udot
Evgeny Torbin
hebinglin
Ashish Sharma
armando
wuzhenghui
Marek Fiala
Marius Vikhammer
nilesh.kale
Richard Allen
Shen Meng Jing
David Cermak
morris
Ivan Grokhotkov
Chen Yudong
Bogdan Kolendovskyy