- Fixed power state setting when entering modem sleep
- Support get the range of TX power level
- Support clear legacy adv using vendor hci
- Fix bugs in setting adv data and response data when data length is zero
- Add new mesh types for exception list on ESP32-C3
- Fixed address resolution for directed adv with RPA when scanning on ESP32-C3
- Fixed resolvable private address renew after timeout on ESP32-C3
- Fixed extended adv address setting after adv restart on ESP32-C3
- Fixed scan channel index setting for extended scan on ESP32-C3
- Add API to set aux channel index for extended adv on ESP32-C3
- modify mesh proxy solic uuid to 0x18590303 on ESP32-C3
- Fixed DTM payload length cannot be 0 on ESP32-C3
- Added config to enable Hw recorrect eco on ESP32-C3
- report the number of packets sent on the TX end on ESP32-C3
1: add param check for HCI_Recevie_Synchronization_Train.
2: add param check for HCI_Set_Connectionless_Peripheral_Broadcast.
3: fix slave cannot take a secure authentication.
- Support BLE RX error packet count record
- Fixed adv random delay when adv interval is less than 20ms
- Fixed adv random address setting when owner address type is public
1. Fix WiFi not working with Tsens on ESP32S2.
2. WiFi RX multimpath optimization.
3. BLE TX sideband optimization for C3.
4. Fix WiFi and BLE calibration conflict issue.
1. Fixed LC_AFH_UPDATE_IND has not benn processed causing memory exhaustion
2. Fixed no free elt in prog push
3. Fixed disconnect due to sniff with error Dsniff
4. Fixed the problem that the host continued to send ACL data to the controller after disconnection, which caused the connection to fail again
1 Fixed disconnection delay on peripheral when slave latency is not zero
2 Fixed LLCP info init for central and peripheral
3 Fixed sent cmd status evt twice when process disconnect cmd
1. Fixed crash after controller disable and re-enable
2. Fixed the crash caused by processing the HCI_Read_Remote_Extented_Features command in the non-connected state
3. Fixed disconnection due to not handling lmp_unsniff_req in LC_WAIT_SNIFF_SUB_RSP state
4. Fixed crash caused by supervision timeout greater than sniff interval
Closes https://github.com/espressif/esp-idf/issues/11164
Closes https://github.com/espressif/esp-idf/issues/10835
- Add config to set duplicate scan list refresh period
- overwrite the oldest device infor if the list is full
- Fixed duplicate scan period is not accurate
- Add config to set duplicate scan list refresh period
- overwrite the oldest device infor if the list is full
- Fixed duplicate scan period is not accurate
- Fixed some memory was not released after bluetooth controller initialization failed
- Fixed privacy errorr for directed advertising
- Fixed multiple periodic advertising sync failed in air
- Fixed lld_con.c line 3048 assert
- Fixed crash sometimes when connected as a slave by the 8th device
1 change default TX power to 9 dBm
2 fixed disconnect reason 0x1f (unspecified error)
3 fixed connection timeout due to terminate ind has not been acknowledged
- Added config to disable scan backoff
- Fixed llm_scan.c assert at line 1485 during controller deinit if duplicate scan is not stopped
- Call pll track in controller task
- Fixed the usage of PLL track related baseband IRQs
- Fixed connect failed due to error sync found signal
- Fixed BLE disconnect failed due to terminate_ind have sent but no ACK is received
- Added ADV mode error check in ADV rx isr handler function
- Fixed BLE RAL_UNDERRUN and TX_CRYPT_ERR assert
- Disable scan continue
- Fixed scan forever if scan continue is disable
- Fixed BLE disconnection issue when channel map update failed due to bad channels
