This commit implements a workaround that allows ESP32-C5 to run at 240MHz CPU frequency
normally, while automatically reducing CPU frequency during encrypted flash writes to
ensure correct operation. The frequency limit is chip revision dependent:
- v1.2 and above: limited to 160MHz during encrypted writes
- v1.0 and below: limited to 80MHz during encrypted writes
Key implementation details:
- Frequency limiting is triggered automatically when esp_flash_write_encrypted() is called
- Uses start() flags (ESP_FLASH_START_FLAG_LIMIT_CPU_FREQ) to integrate with OS layer
- Works with both PM enabled and disabled configurations
- Frequency is automatically restored after encrypted write completes
- For ESP32-C5 with 120MHz flash, Flash clock and timing registers are adjusted when
CPU frequency is reduced to 80MHz
- SPI1 timing registers are configured during frequency switching since encrypted writes
use SPI1 and must work correctly at reduced CPU frequencies
Code improvements:
- Use SOC_MSPI_FREQ_AXI_CONSTRAINED capability macro instead of hardcoded chip checks
- Control workaround via Kconfig (CONFIG_PM_WORKAROUND_FREQ_LIMIT_ENABLED) instead of
hardcoded macros
- Add comprehensive test cases covering various PM configurations and edge cases
This workaround enables ESP32-C5 applications to benefit from 240MHz CPU performance
while maintaining reliable encrypted flash write functionality.
Prior to this change, `spi_flash_hal_supports_direct_write` and
`spi_flash_hal_supports_direct_read` will check the buffer pointer
place, which should be done in driver layer, instead of HAL layer.
Including:
1. Change the write bytes/read bytes parameter in the host driver into slicers to meet the requirements of complicated cases.
2. Refactor the esp_flash_api code a bit so that we can use the code in the ROM laster
3. Provide get_temp_buffer and release_temp_buffer in the os_functions when the buffer passed by application cannot be used directly.
4. Make timeout of operations configurable in the chip_driver.
5. Make dummy number configurable.
During coredump, dangerous-area-checking should be disabled, and cache
disabling should be replaced by a safer version.
Dangerous-area-checking used to be in the HAL, but it seems to be more
fit to os functions. So it's moved to os functions. Interfaces are
provided to switch between os functions during coredump.
