1. fix(wifi): Rename old NAN configuration to NAN-Sync
- Rename CONFIG_ESP_WIFI_NAN_ENABLE to CONFIG_ESP_WIFI_NAN_SYNC_ENABLE to indicate
the support for Synchronized NAN (Wi-Fi Aware).
- Because the original flag really controls the synchronized feature set, rename it
to CONFIG_ESP_WIFI_NAN_SYNC_ENABLE so the NAN-Sync and NAN-USD paths can be
selected independently without confusion.
2. Document esp_wifi_start requirement and fix USD examples
3. Rename nan_callbacks to nan_sync_callbacks
4. Remove the discovery_flag, clarify docs for sync vs USD flows, and add USD start/stop APIs
5. Require esp_wifi_start() before USD start
6. docs(nan): add NAN-USD application examples
7. add migration guide and hints for NAN-USD proto field
8. Improve allow_broadcast documentation
9. Add attention to the API esp_wifi_remain_on_channel
10. fix(wifi): align NAN API renames and docs for v6.0
- keep shared APIs under esp_wifi_nan_* while reserving
sync/usd names for mode-specific entry points
- clarify synchronized-cluster scope in headers, docs, and migration notes (EN/zh-CN)
- update examples for renamed helpers and WIFI_NAN_SYNC_CONFIG_DEFAULT()
- rename `wifi_nan_config_t` to `wifi_nan_sync_config_t`
11. Mark NAN-USD as esp-idf experimental feature
1. Remove redundant fixes in upstream wpa_supplicant for USD
- Upstream supplicant has mostly fixed the issues regarding the
unnecessary resetting pauseStateTimeout.
- Upstream supplicant still needs one fix to avoid resetting the
pauseStateTimeout when subscribe message is received from the peer
which had triggered the pauseStateTimeout previously.
2. Replace array-based channel list with bitmap for NaN-USD
Use `wifi_scan_channel_bitmap_t` to represent the channel list for NaN-USD
publisher and subscriber configurations. This replaces the previous approach
that used a large array to store allowed channels.
Also aligns with internal scan bitmap conventions across Wi-Fi stack.
3. call esp_wifi_nan_stop() after USD exchange or STA stop
Ensure esp_wifi_nan_stop() is called after publish/subscribe activity
completes or when WIFI_EVENT_STA_STOP is received. This prevents NAN stop
errors due to inactive interface. NaN-USD currently uses STA interface
for Tx/Rx.
4. Fix task watchdog timer triggered in active USD subscriber:
As both USD supplicant and offchan TX component gets executed
in the wifi task, it created a deadlock like scenario where offchan TX
done callback was never getting executed and supplicant 'nan_de_timer'
keeps running but failing to send any subscribe frame.
5. Make sure that device is able to recieve action management frames
of size more than 1400 bytes.
6. Update proto field in SSI to match Wi-Fi Aware (NaN) spec format
The 'proto' field in the 'wifi_nan_wfa_ssi_t' structure previously used an
enum (wifi_nan_svc_proto_t), resulting in a 32-bit field. According to
the Wi-Fi NAN Specification (Table 5.7), this field must be a single
octet (8 bits). This commit updates the type to uint8_t to ensure
compliance with the specification.
This mismatch previously triggered warnings but did not cause functional
errors.
7. Set `allow_broadcast` to true in USD Remain on channel
This enables the peer discovery as USD uses NAN-Network Multicast BSSID
as A3 address in publish frames.
8. Implement custom channel<->frequency conversion for NAN-USD
NaN-USD only permits 20 MHz bandwidth channels in the 2.4 GHz and 5 GHz bands
(as per section 4.5.3 of the Wi-Fi Aware Specification v4.0). To avoid linking
a large portion of upstream supplicant code for frequency-to-channel and
channel-to-frequency conversion, implement minimal custom helper functions.
9. Limit NAN_DE_MAX_SERVICE to 2 for ESP_SUPPLICANT
10. Note: Upstream clamps negative `os_reltime` deltas to zero in `nan_de_srv_time_to_next()`,
but our ESP_SUPPLICANT port keeps `os_time_t` unsigned, so that guard just provokes a
compiler warning. We skip it for now because the scheduling loop validates past timestamps
before computing the diff.
Co-authored-by: Shyamal Khachane <shyamal.khachane@espressif.com>
- Fix issues in Max Idle period negotiation and protected keep alive
- Add BSS Max Idle config in SoftAP config and create a feature flag
- Add a unit test case to test both STA and SoftAP implementation
- Avoid downgrading TLS ciphersuites when client RSA keys are larger than RSA-2048 bit.
- Note that when using bigger certificates on low-power chips without crypto
hardware acceleration, it is recommended to adjust the task watchdog timer (TWDT)
if it is enabled. For precise information on timing requirements, you can check
performance numbers at https://github.com/espressif/mbedtls/wiki/Performance-Numbers.
Update wifi lib with below -
1. Create NAN Discovery SM for beaconing & cluster formation
2. Create NAN interface for Tx/Rx of beacons & action frames
3. Add commands & events for NAN Services Publish/Subscribe/Followup
4. Add NAN Datapath definitions, Events, Peer structures
5. Support for forming and parsing of Datapath related attributes
6. Modules for NDP Req, Resp, Confirm, Term, Peer management
7. NAN Interface related additions in Datapath, Data Tx Q's
In addition include below changes -
1. Add netif and driver support for NAN Interface
2. Add simple examples for Publisher-Subscriber usecases
3. Add an advanced console example that supports commands
for NAN Discovery, Services & Datapath
4. Add wifi_apps for providing better NAN API's and Peer management
Co-authored-by: Shyamal Khachane <shyamal.khachane@espressif.com>
modem retention: Support esp32c6 wifi MAC and baseband sleep retention
sleep_modem: wifi MAC modem wakeup protect in modem state before PMU trigger sleep enable request
sleep modem: provide a interface to get whether the Modem power domain is allowed to power off during sleep
add i2c_ana master header file to project
auto beacon: release PMU's lock on root clock source (it is locked in the PLL)
wifi receiving beacon frame in PMU modem state strongly depends on the BBPLL
clock, PMU will forcibly lock the root clock source as PLL, when the root
clock source of the software system is selected as PLL, we need to release
the root clock source locking.
When it is judged that the PLL is locked by PMU after wakeing up from the PMU
modem state, switch the root clock source to the PLL in the sleep process (a
critical section).
auto beacon: fix the failure to receive broadcast/multicast frames in modem state
When the multicast field in the beacon frame received in the PMU modem state is
True, the PMU switches to the PMU active state (the PMU waits for the HP LDO to
stabilize and then restores the MAC context) and starts to receive
broadcast/multicast frames (Broadcast/Multicast frames will be sent after a
minimum delay of 48 us after the beacon frame), because the PMU waits for the HP
LDO to stabilize too long (~154 us), which will cause broadcast/multicast frame
reception to be missed.
auto beacon: select the PLL clock source as the REGDMA backup clock source when the PMU switches to ACTIVE from MODEM state
update Digital Peripheral (M2A switch) REGDMA restore time parameter
auto beacon: fix the issue that only channel 1 can connect to AP in modem state
