Add a helper function for printing multi-line post-build messages on a
target. The message lines are joined with newlines, written to a file at
configure time, and printed at build time using a single cmake -E cat
command, replacing the need for repeated cmake -E echo invocations.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Add a public API function to check that the bootloader binary does not
overlap the partition table, mirroring the existing idf_check_binary_size
pattern for application binaries.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
The KEYFILE argument value was stored in a misspelled variable
"keyfle" instead of "keyfile", causing custom keyfile paths to
be silently ignored.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
The commonly required components are configured solely for backward
compatibility with cmakev1. Since the bootloader build explicitly sets
commonly required components, we need to support this feature in cmakev2
as well. Ideally, there should be no commonly required components, and
each component should specify its requirements explicitly.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Some config options, like IDF_TARGET, are present in
sdkconfig.defaults even though they are promptless. The build system
handles them manually and passes them to esp-idf-kconfig via
config.env. However, esp-idf-kconfig reports them like a normal
promptless symbol, which causes confusion.
This commit adds KCONFIG_PROMPTLESS_NO_WARN — a semicolon-separated
list of config option names that, even though promptless, should be
excluded from the report.
Closes https://github.com/espressif/esp-idf/issues/18441
Add a buildv2 test that reconfigures the test app with both GCC and
clang toolchains and asserts that the selected IDF_TOOLCHAIN value
is propagated to sdkconfig. The clang case is skipped when a clang
compiler is not available in PATH.
In the cmakev2 build framework, the selected toolchain was not
consistently propagated to sdkconfig generation. For clang builds,
this produced a configuration that was incompatible with the clang
toolchain and broke compilation.
Ensure the toolchain selection is observed consistently so sdkconfig
and component configuration reflect the intended toolchain for both
GCC and clang builds.
Made-with: Cursor
idf-ci discovers pyproject.toml pytest config and runs a separate
collection pass with --target all, which finds 0 target tests and
raises RuntimeError. Add to .idf_ci.toml exclude_dirs instead of
deleting tests. Restore all 227 unit tests with lint/mypy fixes.
(cherry picked from commit 205bc49fd6)
Co-authored-by: Zhou Xiao <zhouxiao@espressif.com>
Add BufUtilTracker to record per-LBM inflight peak data, wire it
through StatsAccumulator and StatsUpdated message for thread-safe
delivery to the UI. Buffer utilization is displayed in a dedicated
BufUtilScreen accessible via the 'm' keybinding, separate from
the frame stats screen ('d').
Also reject false INIT_DONE frames with version==0 caused by
misaligned data during parser sync, preventing spurious stats resets.
(cherry picked from commit ca920a8e8f)
Co-authored-by: Zhou Xiao <zhouxiao@espressif.com>
Add BUF_UTIL=5 to InternalSource, BufUtilPool enum, BufUtilResult
TypedDict, BufUtilEntry dataclass, and name resolution helpers.
Add decode branch in internal_decoder with pool/index extraction
from the packed lbm_id field. Tests cover valid decode, pool/index
extraction, and truncated payload handling.
(cherry picked from commit d9a4d15203)
Co-authored-by: Zhou Xiao <zhouxiao@espressif.com>
- Click-based CLI entry point (console.py) with --port, --baudrate,
--log-dir options and interactive Launch Screen when --port omitted
- Deprecation warning for --output CLI flag
- 'ls' subcommand to list saved capture files
- PyInstaller build scripts (build.sh, build.bat, build_exe.py)
- Convenience run scripts (run.sh, run.bat)
- README rewrite with installation, usage, architecture docs, and
troubleshooting guide
- User guides in English and Chinese
- Remove old single-file ble_log_console.py
- Register new scripts in executable-list.txt
(cherry picked from commit a51d879d1b)
Co-authored-by: Zhou Xiao <zhouxiao@espressif.com>
TUI frontend built on Textual with thread-safe backend integration:
- Launch screen with port/baud/log-dir selection and auto-refresh
- Log view with scrollable RichLog and color-coded write methods;
Rich markup escaped to prevent crash on bracket characters
- Stats screen split into two tables by time base:
- Firmware Counters (since chip init): Written and Buffer Loss
- Console Measurements (since console start): Average Throughput
and Peak Write — each with separate frames and bytes sub-columns
- Column widths constrained with min_width/max_width for stable layout
- Division-by-zero guard when peak window is zero
- Shortcut screen overlay
- Status panel with sync state, checksum mode, and transport metrics;
speed display uses named UART_BITS_PER_BYTE constant
- Main app wiring: UART reader thread with threading.Lock for serial
access, frame parser pipeline, stats emission via StatsUpdated
messages (including funnel snapshots via public accessor for
thread-safe delivery), BackendStopped message for disconnect
- BackendStopped posted on open_serial failure (prevents stuck status)
- Select.BLANK guard for baud rate in launch screen
- Explicit None guards replace asserts in backend worker
- Wall-clock burst tracking for REDIR frames (no chip-side timestamp)
- SN gap alerts (FrameLossDetected) and traffic spike notifications
(cherry picked from commit 02f1960e56)
Co-authored-by: Zhou Xiao <zhouxiao@espressif.com>
Delete ble_log_uhci_out.c and its header. Remove the UHCI Out source
from CMakeLists.txt and all BT_BLE_LOG_UHCI_OUT_* Kconfig options.
Remove per-chip BT_LE_CONTROLLER_LOG_UHCI_OUT_ENABLED Kconfig and
all UHCI Out caller references in esp32c5/c6/h2 controller bt.c.
Update ble_log_console README to reference the new BLE Log Module
UART DMA config. The functionality is superseded by the BLE Log
Module's UART DMA peripheral transport.
(cherry picked from commit d51892380b)
Co-authored-by: Zhou Xiao <zhouxiao@espressif.com>
Verify that setting IDF_COMPONENT_MANAGER=0 skips the component manager
flow entirely and produces a successful build. The test also asserts that
no "Component manager round" messages appear in the output, confirming
the manager loop is not entered.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
When the component manager is disabled via IDF_COMPONENT_MANAGER=0, the
cmakev2 build system still entered the full component manager flow
(__fetch_components_from_registry), which called
__download_managed_component(). That function returned early with
result=0 without creating the expected output file, violating the
post-condition in __download_component_level_managed_components() that
checks result==0 => file exists, causing a fatal error.
Instead of patching the low-level function to write an empty stub file,
this commit properly skips the entire component manager flow when the
manager is disabled:
- Move __init_component_manager() to idf.cmake global initialization
sequence alongside other __init_*() calls, so IDF_COMPONENT_MANAGER
build property is available early.
- Set __SDKCONFIG_ORIG to the real sdkconfig path in __init_kconfig()
as its default value. Previously it was only set inside
__create_sdkconfig_orig_copy() and had a defensive fallback in
__create_base_kconfgen_command(). The default ensures __SDKCONFIG_ORIG
is always valid regardless of whether the component manager runs.
- Guard __create_sdkconfig_orig_copy() with an IDF_COMPONENT_MANAGER
check. The sdkconfig backup exists solely to preserve unknown Kconfig
options from managed components during intermediate kconfgen rounds.
When the manager is disabled, no managed components exist, so the
backup is unnecessary.
- Guard __fetch_components_from_registry() call in project.cmake behind
IDF_COMPONENT_MANAGER == 1. When disabled, only the manifest warning
is issued. No download loop runs, no temp files are created, and no
"Component manager round N..." messages are printed.
- Remove the now-redundant IDF_COMPONENT_MANAGER guard from
__download_managed_component(), since it is only reachable when the
manager is enabled.
Closes https://github.com/espressif/esp-idf/issues/18372
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
The cherry-pick in the backport of \!46287 (test/buildv2_pytest_build_v6.0)
dropped the deletion of tools/cmakev2/test/CMakeLists.txt. The original MR
deleted all 15 files from the tools/cmakev2/test/ directory, but the
cherry-pick only captured 14 deletions. This commit removes the missed file.
Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>
Frantisek Hrbata
Roland Dobai
Marek Fiala
Mahavir Jain
Euripedes Rocha
Fu Hanxi
Jan Beran
Ivan Grokhotkov
Roland Dobai
Sudeep Mohanty
David Cermak
Erhan Kurubas
Ashish Sharma
Marius Vikhammer
Zhou Xiao
Jiang Jiang Jian
igor.udot