Merge branch 'feat/ble_log_compression_module_cfg_update_v6.1' into 'release/v6.1'

Feat/ble log compression module cfg update (6.1)

See merge request espressif/esp-idf!49876

components/bt/common/ble_log/extension/log_compression/Kconfig.in

@@ -15,786 +15,7 @@ config BLE_COMPRESSED_LOG_ENABLE
         for installation instructions.
 
 if BLE_COMPRESSED_LOG_ENABLE
-    menuconfig BLE_MESH_COMPRESSED_LOG_ENABLE
+    source "$IDF_PATH/components/bt/common/ble_log/extension/log_compression/profile/mesh/Kconfig.mesh.in"
-        bool "Enable BLE Mesh log compression(Preview)"
+    source "$IDF_PATH/components/bt/common/ble_log/extension/log_compression/iso/audio/Kconfig.iso.in"
-        depends on BLE_COMPRESSED_LOG_ENABLE
+    source "$IDF_PATH/components/bt/common/ble_log/extension/log_compression/host/Kconfig.host.in"
-        depends on BLE_MESH
-        default n
-        help
-            Apply compression to ESP-BLE-MESH protocol stack logs. Requires
-            base BLE compression to be enabled. Specifically optimizes log
-            storage and transmission for ble mesh.
-
-            Note: This library depends on additional Python packages. It will
-            function correctly only after these dependencies are installed;
-            refer to:
-            "components/bt/common/ble_log/log_compression/README.en.md"
-            for installation instructions.
-
-            If the required packages are not installed, the log-compression
-            mechanism will remain disabled even when this Config is enabled.
-
-    config BLE_MESH_COMPRESSED_LOG_BUFFER_LEN
-        int "BLE Mesh log buffer length"
-        depends on BLE_MESH_COMPRESSED_LOG_ENABLE
-        default 400
-        help
-            Maximum output length for a single log
-
-    if BLE_MESH_COMPRESSED_LOG_ENABLE
-        menu "Select the stack log tag to be compressed"
-            config BLE_MESH_STACK_ERR_LOG_COMPRESSION
-                bool "Compress ERROR log of ESP-BLE-MESH"
-                default y
-                help
-                    The error log in the BLE-MESH component will be compressed
-            config BLE_MESH_STACK_ERR_LOG_PRESERVE
-                bool "Keep the original error log statement"
-                depends on BLE_MESH_STACK_ERR_LOG_COMPRESSION
-                default y
-                help
-                    When this option is enabled, the log data will be output
-                    through both the compressed log interface and the original
-                    UART interface at the same time, meaning that the log
-                    statements will appear on both paths. However, please note
-                    that this dual-output approach introduces additional code
-                    and string constants, which will increase the size of the
-                    firmware binary file. When this option is disabled, the
-                    logs will no longer be printed through the original UART
-                    output path; instead, they will only be output through the
-                    compressed log interface. As the code and strings related
-                    to the original UART output are omitted, the size of the
-                    firmware binary file can be effectively reduced.
-
-            config BLE_MESH_STACK_WARN_LOG_COMPRESSION
-                bool "Compress warn log of ESP-BLE-MESH"
-                default y
-                help
-                    The warn log in the BLE-MESH component will be compressed
-            config BLE_MESH_STACK_WARN_LOG_PRESERVE
-                bool "Keep the original warn log statement"
-                depends on BLE_MESH_STACK_WARN_LOG_COMPRESSION
-                default y
-                help
-                    Please refer to the help information in BLE_MESH_STACK_ERR_LOG_PRESERVE
-            config BLE_MESH_STACK_INFO_LOG_COMPRESSION
-                bool "Compress info log of ESP-BLE-MESH"
-                default y
-                help
-                    The info log in the BLE-MESH component will be compressed
-            config BLE_MESH_STACK_INFO_LOG_PRESERVE
-                bool "Keep the original info log statement"
-                depends on BLE_MESH_STACK_INFO_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_MESH_STACK_ERR_LOG_PRESERVE
-            config BLE_MESH_STACK_DEBUG_LOG_COMPRESSION
-                bool "Compress debug log of ESP-BLE-MESH"
-                default y
-                help
-                    The debug log in the BLE-MESH component will be compressed
-            config BLE_MESH_STACK_DEBUG_LOG_PRESERVE
-                bool "Keep the original debug log statement"
-                depends on BLE_MESH_STACK_DEBUG_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_MESH_STACK_ERR_LOG_PRESERVE
-        endmenu
-        menu "Select the net buf log tag to be compressed"
-            config BLE_MESH_NET_BUF_ERR_LOG_COMPRESSION
-                bool "Compress ERROR log of ESP-BLE-MESH"
-                default y
-                help
-                    The error log in the BLE-MESH component will be compressed
-            config BLE_MESH_NET_BUF_ERR_LOG_PRESERVE
-                bool "Keep the original error log statement"
-                depends on BLE_MESH_NET_BUF_ERR_LOG_COMPRESSION
-                default y
-                help
-                    When this option is enabled, the log data will be output
-                    through both the compressed log interface and the original
-                    UART interface at the same time, meaning that the log
-                    statements will appear on both paths. However, please note
-                    that this dual-output approach introduces additional code
-                    and string constants, which will increase the size of the
-                    firmware binary file. When this option is disabled, the
-                    logs will no longer be printed through the original UART
-                    output path; instead, they will only be output through the
-                    compressed log interface. As the code and strings related
-                    to the original UART output are omitted, the size of the
-                    firmware binary file can be effectively reduced.
-            config BLE_MESH_NET_BUF_WARN_LOG_COMPRESSION
-                bool "Compress warn log of ESP-BLE-MESH"
-                default y
-                help
-                    The warn log in the BLE-MESH component will be compressed
-            config BLE_MESH_NET_BUF_WARN_LOG_PRESERVE
-                bool "Keep the original warn log statement"
-                depends on BLE_MESH_NET_BUF_WARN_LOG_COMPRESSION
-                default y
-                help
-                    Please refer to the help information in BLE_MESH_NET_BUF_ERR_LOG_PRESERVE
-            config BLE_MESH_NET_BUF_INFO_LOG_COMPRESSION
-                bool "Compress info log of ESP-BLE-MESH"
-                default y
-                help
-                    The info log in the BLE-MESH component will be compressed
-            config BLE_MESH_NET_BUF_INFO_LOG_PRESERVE
-                bool "Keep the original info log statement"
-                depends on BLE_MESH_NET_BUF_INFO_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_MESH_NET_BUF_ERR_LOG_PRESERVE
-            config BLE_MESH_NET_BUF_DEBUG_LOG_COMPRESSION
-                bool "Compress debug log of ESP-BLE-MESH"
-                default y
-                help
-                    The debug log in the BLE-MESH component will be compressed
-            config BLE_MESH_NET_BUF_DEBUG_LOG_PRESERVE
-                bool "Keep the original debug log statement"
-                depends on BLE_MESH_NET_BUF_DEBUG_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_MESH_NET_BUF_ERR_LOG_PRESERVE
-        endmenu
-    endif
-
-    menuconfig BLE_HOST_COMPRESSED_LOG_ENABLE
-        bool "Enable BLE Host log compression(Preview)"
-        depends on BLE_COMPRESSED_LOG_ENABLE
-        depends on BT_BLUEDROID_ENABLED || BT_NIMBLE_ENABLED
-        default n
-        help
-            Apply compression to host logs. Requires
-            base BLE compression to be enabled. Specifically optimizes log
-            storage and transmission.
-
-            Note: This library depends on additional Python packages. It will
-            function correctly only after these dependencies are installed;
-            refer to:
-            "components/bt/common/ble_log/log_compression/README.en.md"
-            for installation instructions.
-
-    config BLE_HOST_COMPRESSED_LOG_BUFFER_LEN
-        int "Host log buffer length"
-        depends on BLE_HOST_COMPRESSED_LOG_ENABLE
-        default 300
-        help
-                Maximum output length for a single log
-
-    if BLE_HOST_COMPRESSED_LOG_ENABLE && BT_BLUEDROID_ENABLED
-        menu "Select the BTM layer log tag to be compressed"
-            config BLE_BLUEDROID_BTM_ERROR_LOG_COMPRESSION
-                bool "Compress error log of Bluedroid host"
-                default y
-                help
-                    The error log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_BTM_ERROR_LOG_PRESERVE
-                bool "Keep the original error log statement"
-                depends on BLE_BLUEDROID_BTM_ERROR_LOG_COMPRESSION
-                default y
-                help
-                    When this option is enabled, the log data will be output
-                    through both the compressed log interface and the original
-                    UART interface at the same time, meaning that the log
-                    statements will appear on both paths. However, please note
-                    that this dual-output approach introduces additional code
-                    and string constants, which will increase the size of the
-                    firmware binary file. When this option is disabled, the
-                    logs will no longer be printed through the original UART
-                    output path; instead, they will only be output through the
-                    compressed log interface. As the code and strings related
-                    to the original UART output are omitted, the size of the
-                    firmware binary file can be effectively reduced.
-
-            config BLE_BLUEDROID_BTM_WARNING_LOG_COMPRESSION
-                bool "Compress warning log of Bluedroid host"
-                default y
-                help
-                    The warning log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_BTM_WARNING_LOG_PRESERVE
-                bool "Keep the original warning log statement"
-                depends on BLE_BLUEDROID_BTM_WARNING_LOG_COMPRESSION
-                default y
-                help
-                    Please refer to the help information in BLE_BLUEDROID_BTM_ERROR_LOG_PRESERVE
-
-            config BLE_BLUEDROID_BTM_API_LOG_COMPRESSION
-                bool "Compress api log of Bluedroid host"
-                default y
-                help
-                    The api log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_BTM_API_LOG_PRESERVE
-                bool "Keep the original api log statement"
-                depends on BLE_BLUEDROID_BTM_API_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_BLUEDROID_BTM_ERROR_LOG_PRESERVE
-
-            config BLE_BLUEDROID_BTM_EVENT_LOG_COMPRESSION
-                bool "Compress event log of Bluedroid host"
-                default y
-                help
-                    The event log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_BTM_EVENT_LOG_PRESERVE
-                bool "Keep the original event log statement"
-                depends on BLE_BLUEDROID_BTM_EVENT_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_BLUEDROID_BTM_ERROR_LOG_PRESERVE
-
-            config BLE_BLUEDROID_BTM_DEBUG_LOG_COMPRESSION
-                bool "Compress debug log of Bluedroid host"
-                default y
-                help
-                    The debug log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_BTM_DEBUG_LOG_PRESERVE
-                bool "Keep the original debug log statement"
-                depends on BLE_BLUEDROID_BTM_DEBUG_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_BLUEDROID_BTM_ERROR_LOG_PRESERVE
-
-            config BLE_BLUEDROID_BTM_VERBOSE_LOG_COMPRESSION
-                bool "Compress verbose log of Bluedroid host"
-                default y
-                help
-                    The verbose log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_BTM_VERBOSE_LOG_PRESERVE
-                bool "Keep the original verbose log statement"
-                depends on BLE_BLUEDROID_BTM_VERBOSE_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_BLUEDROID_BTM_ERROR_LOG_PRESERVE
-
-        endmenu
-        menu "Select the LA2CAP layer log tag to be compressed"
-            config BLE_BLUEDROID_L2CAP_ERROR_LOG_COMPRESSION
-                bool "Compress error log of Bluedroid host"
-                default y
-                help
-                    The error log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_L2CAP_ERROR_LOG_PRESERVE
-                bool "Keep the original error log statement"
-                depends on BLE_BLUEDROID_L2CAP_ERROR_LOG_COMPRESSION
-                default y
-                help
-                    When this option is enabled, the log data will be output
-                    through both the compressed log interface and the original
-                    UART interface at the same time, meaning that the log
-                    statements will appear on both paths. However, please note
-                    that this dual-output approach introduces additional code
-                    and string constants, which will increase the size of the
-                    firmware binary file. When this option is disabled, the
-                    logs will no longer be printed through the original UART
-                    output path; instead, they will only be output through the
-                    compressed log interface. As the code and strings related
-                    to the original UART output are omitted, the size of the
-                    firmware binary file can be effectively reduced.
-
-            config BLE_BLUEDROID_L2CAP_WARNING_LOG_COMPRESSION
-                bool "Compress warning log of Bluedroid host"
-                default y
-                help
-                    The warning log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_L2CAP_WARNING_LOG_PRESERVE
-                bool "Keep the original warning log statement"
-                depends on BLE_BLUEDROID_L2CAP_WARNING_LOG_COMPRESSION
-                default y
-                help
-                    Please refer to the help information in BLE_BLUEDROID_L2CAP_ERROR_LOG_PRESERVE
-
-            config BLE_BLUEDROID_L2CAP_API_LOG_COMPRESSION
-                bool "Compress api log of Bluedroid host"
-                default y
-                help
-                    The api log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_L2CAP_API_LOG_PRESERVE
-                bool "Keep the original api log statement"
-                depends on BLE_BLUEDROID_L2CAP_API_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_BLUEDROID_L2CAP_ERROR_LOG_PRESERVE
-
-            config BLE_BLUEDROID_L2CAP_EVENT_LOG_COMPRESSION
-                bool "Compress event log of Bluedroid host"
-                default y
-                help
-                    The event log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_L2CAP_EVENT_LOG_PRESERVE
-                bool "Keep the original event log statement"
-                depends on BLE_BLUEDROID_L2CAP_EVENT_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_BLUEDROID_L2CAP_ERROR_LOG_PRESERVE
-
-            config BLE_BLUEDROID_L2CAP_DEBUG_LOG_COMPRESSION
-                bool "Compress debug log of Bluedroid host"
-                default y
-                help
-                    The debug log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_L2CAP_DEBUG_LOG_PRESERVE
-                bool "Keep the original debug log statement"
-                depends on BLE_BLUEDROID_L2CAP_DEBUG_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_BLUEDROID_L2CAP_ERROR_LOG_PRESERVE
-
-            config BLE_BLUEDROID_L2CAP_VERBOSE_LOG_COMPRESSION
-                bool "Compress verbose log of Bluedroid host"
-                default y
-                help
-                    The verbose log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_L2CAP_VERBOSE_LOG_PRESERVE
-                bool "Keep the original verbose log statement"
-                depends on BLE_BLUEDROID_L2CAP_VERBOSE_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_BLUEDROID_L2CAP_ERROR_LOG_PRESERVE
-        endmenu
-        menu "Select the GAP layer log tag to be compressed"
-            config BLE_BLUEDROID_GAP_ERROR_LOG_COMPRESSION
-                bool "Compress error log of Bluedroid host"
-                default y
-                help
-                    The error log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_GAP_ERROR_LOG_PRESERVE
-                bool "Keep the original error log statement"
-                depends on BLE_BLUEDROID_GAP_ERROR_LOG_COMPRESSION
-                default y
-                help
-                    When this option is enabled, the log data will be output
-                    through both the compressed log interface and the original
-                    UART interface at the same time, meaning that the log
-                    statements will appear on both paths. However, please note
-                    that this dual-output approach introduces additional code
-                    and string constants, which will increase the size of the
-                    firmware binary file. When this option is disabled, the
-                    logs will no longer be printed through the original UART
-                    output path; instead, they will only be output through the
-                    compressed log interface. As the code and strings related
-                    to the original UART output are omitted, the size of the
-                    firmware binary file can be effectively reduced.
-
-            config BLE_BLUEDROID_GAP_WARNING_LOG_COMPRESSION
-                bool "Compress warning log of Bluedroid host"
-                default y
-                help
-                    The warning log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_GAP_WARNING_LOG_PRESERVE
-                bool "Keep the original warning log statement"
-                depends on BLE_BLUEDROID_GAP_WARNING_LOG_COMPRESSION
-                default y
-                help
-                    Please refer to the help information in BLE_BLUEDROID_GAP_ERROR_LOG_PRESERVE
-
-            config BLE_BLUEDROID_GAP_API_LOG_COMPRESSION
-                bool "Compress api log of Bluedroid host"
-                default y
-                help
-                    The api log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_GAP_API_LOG_PRESERVE
-                bool "Keep the original api log statement"
-                depends on BLE_BLUEDROID_GAP_API_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_BLUEDROID_GAP_ERROR_LOG_PRESERVE
-
-            config BLE_BLUEDROID_GAP_EVENT_LOG_COMPRESSION
-                bool "Compress event log of Bluedroid host"
-                default y
-                help
-                    The event log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_GAP_EVENT_LOG_PRESERVE
-                bool "Keep the original event log statement"
-                depends on BLE_BLUEDROID_GAP_EVENT_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_BLUEDROID_GAP_ERROR_LOG_PRESERVE
-
-            config BLE_BLUEDROID_GAP_DEBUG_LOG_COMPRESSION
-                bool "Compress debug log of Bluedroid host"
-                default y
-                help
-                    The debug log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_GAP_DEBUG_LOG_PRESERVE
-                bool "Keep the original debug log statement"
-                depends on BLE_BLUEDROID_GAP_DEBUG_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_BLUEDROID_GAP_ERROR_LOG_PRESERVE
-
-            config BLE_BLUEDROID_GAP_VERBOSE_LOG_COMPRESSION
-                bool "Compress verbose log of Bluedroid host"
-                default y
-                help
-                    The verbose log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_GAP_VERBOSE_LOG_PRESERVE
-                bool "Keep the original verbose log statement"
-                depends on BLE_BLUEDROID_GAP_VERBOSE_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_BLUEDROID_GAP_ERROR_LOG_PRESERVE
-        endmenu
-        menu "Select the GATT layer log tag to be compressed"
-            config BLE_BLUEDROID_GATT_ERROR_LOG_COMPRESSION
-                bool "Compress error log of Bluedroid host"
-                default y
-                help
-                    The error log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_GATT_ERROR_LOG_PRESERVE
-                bool "Keep the original error log statement"
-                depends on BLE_BLUEDROID_GATT_ERROR_LOG_COMPRESSION
-                default y
-                help
-                    When this option is enabled, the log data will be output
-                    through both the compressed log interface and the original
-                    UART interface at the same time, meaning that the log
-                    statements will appear on both paths. However, please note
-                    that this dual-output approach introduces additional code
-                    and string constants, which will increase the size of the
-                    firmware binary file. When this option is disabled, the
-                    logs will no longer be printed through the original UART
-                    output path; instead, they will only be output through the
-                    compressed log interface. As the code and strings related
-                    to the original UART output are omitted, the size of the
-                    firmware binary file can be effectively reduced.
-
-            config BLE_BLUEDROID_GATT_WARNING_LOG_COMPRESSION
-                bool "Compress warning log of Bluedroid host"
-                default y
-                help
-                    The warning log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_GATT_WARNING_LOG_PRESERVE
-                bool "Keep the original warning log statement"
-                depends on BLE_BLUEDROID_GATT_WARNING_LOG_COMPRESSION
-                default y
-                help
-                    Please refer to the help information in BLE_BLUEDROID_GATT_ERROR_LOG_PRESERVE
-
-            config BLE_BLUEDROID_GATT_API_LOG_COMPRESSION
-                bool "Compress api log of Bluedroid host"
-                default y
-                help
-                    The api log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_GATT_API_LOG_PRESERVE
-                bool "Keep the original api log statement"
-                depends on BLE_BLUEDROID_GATT_API_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_BLUEDROID_GATT_ERROR_LOG_PRESERVE
-
-            config BLE_BLUEDROID_GATT_EVENT_LOG_COMPRESSION
-                bool "Compress event log of Bluedroid host"
-                default y
-                help
-                    The event log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_GATT_EVENT_LOG_PRESERVE
-                bool "Keep the original event log statement"
-                depends on BLE_BLUEDROID_GATT_EVENT_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_BLUEDROID_GATT_ERROR_LOG_PRESERVE
-
-            config BLE_BLUEDROID_GATT_DEBUG_LOG_COMPRESSION
-                bool "Compress debug log of Bluedroid host"
-                default y
-                help
-                    The debug log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_GATT_DEBUG_LOG_PRESERVE
-                bool "Keep the original debug log statement"
-                depends on BLE_BLUEDROID_GATT_DEBUG_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_BLUEDROID_GATT_ERROR_LOG_PRESERVE
-
-            config BLE_BLUEDROID_GATT_VERBOSE_LOG_COMPRESSION
-                bool "Compress verbose log of Bluedroid host"
-                default y
-                help
-                    The verbose log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_GATT_VERBOSE_LOG_PRESERVE
-                bool "Keep the original verbose log statement"
-                depends on BLE_BLUEDROID_GATT_VERBOSE_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_BLUEDROID_GATT_ERROR_LOG_PRESERVE
-        endmenu
-        menu "Select the SMP layer log tag to be compressed"
-            config BLE_BLUEDROID_SMP_ERROR_LOG_COMPRESSION
-                bool "Compress error log of Bluedroid host"
-                default y
-                help
-                    The error log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_SMP_ERROR_LOG_PRESERVE
-                bool "Keep the original error log statement"
-                depends on BLE_BLUEDROID_SMP_ERROR_LOG_COMPRESSION
-                default y
-                help
-                    When this option is enabled, the log data will be output
-                    through both the compressed log interface and the original
-                    UART interface at the same time, meaning that the log
-                    statements will appear on both paths. However, please note
-                    that this dual-output approach introduces additional code
-                    and string constants, which will increase the size of the
-                    firmware binary file. When this option is disabled, the
-                    logs will no longer be printed through the original UART
-                    output path; instead, they will only be output through the
-                    compressed log interface. As the code and strings related
-                    to the original UART output are omitted, the size of the
-                    firmware binary file can be effectively reduced.
-
-            config BLE_BLUEDROID_SMP_WARNING_LOG_COMPRESSION
-                bool "Compress warning log of Bluedroid host"
-                default y
-                help
-                    The warning log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_SMP_WARNING_LOG_PRESERVE
-                bool "Keep the original warning log statement"
-                depends on BLE_BLUEDROID_SMP_WARNING_LOG_COMPRESSION
-                default y
-                help
-                    Please refer to the help information in BLE_BLUEDROID_SMP_ERROR_LOG_PRESERVE
-
-            config BLE_BLUEDROID_SMP_API_LOG_COMPRESSION
-                bool "Compress api log of Bluedroid host"
-                default y
-                help
-                    The api log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_SMP_API_LOG_PRESERVE
-                bool "Keep the original api log statement"
-                depends on BLE_BLUEDROID_SMP_API_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_BLUEDROID_SMP_ERROR_LOG_PRESERVE
-
-            config BLE_BLUEDROID_SMP_EVENT_LOG_COMPRESSION
-                bool "Compress event log of Bluedroid host"
-                default y
-                help
-                    The event log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_SMP_EVENT_LOG_PRESERVE
-                bool "Keep the original event log statement"
-                depends on BLE_BLUEDROID_SMP_EVENT_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_BLUEDROID_SMP_ERROR_LOG_PRESERVE
-
-            config BLE_BLUEDROID_SMP_DEBUG_LOG_COMPRESSION
-                bool "Compress debug log of Bluedroid host"
-                default y
-                help
-                    The debug log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_SMP_DEBUG_LOG_PRESERVE
-                bool "Keep the original debug log statement"
-                depends on BLE_BLUEDROID_SMP_DEBUG_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_BLUEDROID_SMP_ERROR_LOG_PRESERVE
-
-            config BLE_BLUEDROID_SMP_VERBOSE_LOG_COMPRESSION
-                bool "Compress verbose log of Bluedroid host"
-                default y
-                help
-                    The verbose log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_SMP_VERBOSE_LOG_PRESERVE
-                bool "Keep the original verbose log statement"
-                depends on BLE_BLUEDROID_SMP_VERBOSE_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_BLUEDROID_SMP_ERROR_LOG_PRESERVE
-        endmenu
-        menu "Select the APPL layer log tag to be compressed"
-            config BLE_BLUEDROID_APPL_ERROR_LOG_COMPRESSION
-                bool "Compress error log of Bluedroid host"
-                default y
-                help
-                    The error log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_APPL_ERROR_LOG_PRESERVE
-                bool "Keep the original error log statement"
-                depends on BLE_BLUEDROID_APPL_ERROR_LOG_COMPRESSION
-                default y
-                help
-                    When this option is enabled, the log data will be output
-                    through both the compressed log interface and the original
-                    UART interface at the same time, meaning that the log
-                    statements will appear on both paths. However, please note
-                    that this dual-output approach introduces additional code
-                    and string constants, which will increase the size of the
-                    firmware binary file. When this option is disabled, the
-                    logs will no longer be printed through the original UART
-                    output path; instead, they will only be output through the
-                    compressed log interface. As the code and strings related
-                    to the original UART output are omitted, the size of the
-                    firmware binary file can be effectively reduced.
-
-            config BLE_BLUEDROID_APPL_WARNING_LOG_COMPRESSION
-                bool "Compress warning log of Bluedroid host"
-                default y
-                help
-                    The warning log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_APPL_WARNING_LOG_PRESERVE
-                bool "Keep the original warning log statement"
-                depends on BLE_BLUEDROID_APPL_WARNING_LOG_COMPRESSION
-                default y
-                help
-                    Please refer to the help information in BLE_BLUEDROID_APPL_ERROR_LOG_PRESERVE
-
-            config BLE_BLUEDROID_APPL_API_LOG_COMPRESSION
-                bool "Compress api log of Bluedroid host"
-                default y
-                help
-                    The api log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_APPL_API_LOG_PRESERVE
-                bool "Keep the original api log statement"
-                depends on BLE_BLUEDROID_APPL_API_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_BLUEDROID_APPL_ERROR_LOG_PRESERVE
-
-            config BLE_BLUEDROID_APPL_EVENT_LOG_COMPRESSION
-                bool "Compress event log of Bluedroid host"
-                default y
-                help
-                    The event log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_APPL_EVENT_LOG_PRESERVE
-                bool "Keep the original event log statement"
-                depends on BLE_BLUEDROID_APPL_EVENT_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_BLUEDROID_APPL_ERROR_LOG_PRESERVE
-
-            config BLE_BLUEDROID_APPL_DEBUG_LOG_COMPRESSION
-                bool "Compress debug log of Bluedroid host"
-                default y
-                help
-                    The debug log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_APPL_DEBUG_LOG_PRESERVE
-                bool "Keep the original debug log statement"
-                depends on BLE_BLUEDROID_APPL_DEBUG_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_BLUEDROID_APPL_ERROR_LOG_PRESERVE
-
-            config BLE_BLUEDROID_APPL_VERBOSE_LOG_COMPRESSION
-                bool "Compress verbose log of Bluedroid host"
-                default y
-                help
-                    The verbose log in the  Bluedroid host component will be compressed
-            config BLE_BLUEDROID_APPL_VERBOSE_LOG_PRESERVE
-                bool "Keep the original verbose log statement"
-                depends on BLE_BLUEDROID_APPL_VERBOSE_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_BLUEDROID_APPL_ERROR_LOG_PRESERVE
-        endmenu
-    endif
-
-    # ---------------------------------------------------------------------
-    # BLE ISO log compression (esp_ble_iso component)
-    # ---------------------------------------------------------------------
-    menuconfig BLE_ISO_COMPRESSED_LOG_ENABLE
-        bool "Enable BLE ISO log compression(Preview)"
-        depends on BLE_COMPRESSED_LOG_ENABLE
-        depends on BT_ISO
-        default n
-        help
-            Apply compression to ESP-BLE-ISO host shim logs (the
-            esp_ble_iso component) AND every IDF-source consumer that
-            shares the ISO LOG_* macro family — currently esp_ble_audio,
-            and future modules such as HID-over-ISO. All such sources
-            share one iso_log_index.h with one monotonic log-id counter.
-            Requires base BLE compression to be enabled.
-
-            Note: prebuilt libraries (e.g. libble_audio.a) emit logs via
-            an independent runtime callback (BLE_AUDIO_LIB) and are not
-            governed by this option.
-
-            Note: This library depends on additional Python packages. It
-            will function correctly only after these dependencies are
-            installed; refer to:
-            "components/bt/common/ble_log/log_compression/README.en.md"
-            for installation instructions.
-
-            If the required packages are not installed, the
-            log-compression mechanism will remain disabled even when this
-            Config is enabled.
-
-    config BLE_ISO_COMPRESSED_LOG_BUFFER_LEN
-        int "BLE ISO log buffer length"
-        depends on BLE_ISO_COMPRESSED_LOG_ENABLE
-        default 512
-        help
-            Maximum output length for a single log. Shared by every IDF
-            source compiled into the BLE_ISO compression channel
-            (esp_ble_iso, esp_ble_audio, and future ISO consumers).
-
-    if BLE_ISO_COMPRESSED_LOG_ENABLE
-
-        menu "Select the stack log tag to be compressed"
-            config BLE_ISO_STACK_ERR_LOG_COMPRESSION
-                bool "Compress ERROR log"
-                default y
-                help
-                    The error log in the BLE-ISO component will be compressed
-
-            config BLE_ISO_STACK_ERR_LOG_PRESERVE
-                bool "Keep the original error log statement"
-                depends on BLE_ISO_STACK_ERR_LOG_COMPRESSION
-                default y
-                help
-                    When this option is enabled, the log data will be output
-                    through both the compressed log interface and the original
-                    UART interface at the same time, meaning that the log
-                    statements will appear on both paths. However, please note
-                    that this dual-output approach introduces additional code
-                    and string constants, which will increase the size of the
-                    firmware binary file. When this option is disabled, the
-                    logs will no longer be printed through the original UART
-                    output path; instead, they will only be output through the
-                    compressed log interface. As the code and strings related
-                    to the original UART output are omitted, the size of the
-                    firmware binary file can be effectively reduced.
-
-            config BLE_ISO_STACK_WARN_LOG_COMPRESSION
-                bool "Compress warn log"
-                default y
-                help
-                    The warn log in the BLE-ISO component will be compressed.
-
-            config BLE_ISO_STACK_WARN_LOG_PRESERVE
-                bool "Keep the original warn log statement"
-                depends on BLE_ISO_STACK_WARN_LOG_COMPRESSION
-                default y
-                help
-                    Please refer to the help information in BLE_ISO_STACK_ERR_LOG_PRESERVE.
-
-            config BLE_ISO_STACK_INFO_LOG_COMPRESSION
-                bool "Compress info log"
-                default y
-                help
-                    The info log in the BLE-ISO component will be compressed.
-
-            config BLE_ISO_STACK_INFO_LOG_PRESERVE
-                bool "Keep the original info log statement"
-                depends on BLE_ISO_STACK_INFO_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_ISO_STACK_ERR_LOG_PRESERVE.
-
-            config BLE_ISO_STACK_DEBUG_LOG_COMPRESSION
-                bool "Compress debug log"
-                default y
-                help
-                    The debug log in the BLE-ISO component will be compressed.
-
-            config BLE_ISO_STACK_DEBUG_LOG_PRESERVE
-                bool "Keep the original debug log statement"
-                depends on BLE_ISO_STACK_DEBUG_LOG_COMPRESSION
-                default n
-                help
-                    Please refer to the help information in BLE_ISO_STACK_ERR_LOG_PRESERVE.
-
-        endmenu
-    endif
 endif

components/bt/common/ble_log/extension/log_compression/cmake/ble_host_bluedroid_tags.cmake

@@ -149,6 +149,358 @@ set(_BLE_HOST_TAG_MAP
     CONFIG_BLE_BLUEDROID_APPL_VERBOSE_LOG_PRESERVE
     APPL_TRACE_VERBOSE
 
+    # HCI Layer
+    CONFIG_BLE_BLUEDROID_HCI_ERROR_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_HCI_ERROR_LOG_PRESERVE
+    HCI_TRACE_ERROR
+
+    CONFIG_BLE_BLUEDROID_HCI_WARNING_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_HCI_WARNING_LOG_PRESERVE
+    HCI_TRACE_WARNING
+
+    CONFIG_BLE_BLUEDROID_HCI_EVENT_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_HCI_EVENT_LOG_PRESERVE
+    HCI_TRACE_EVENT
+
+    CONFIG_BLE_BLUEDROID_HCI_DEBUG_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_HCI_DEBUG_LOG_PRESERVE
+    HCI_TRACE_DEBUG
+
+    # SDP Layer
+    CONFIG_BLE_BLUEDROID_SDP_ERROR_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_SDP_ERROR_LOG_PRESERVE
+    SDP_TRACE_ERROR
+
+    CONFIG_BLE_BLUEDROID_SDP_WARNING_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_SDP_WARNING_LOG_PRESERVE
+    SDP_TRACE_WARNING
+
+    CONFIG_BLE_BLUEDROID_SDP_API_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_SDP_API_LOG_PRESERVE
+    SDP_TRACE_API
+
+    CONFIG_BLE_BLUEDROID_SDP_EVENT_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_SDP_EVENT_LOG_PRESERVE
+    SDP_TRACE_EVENT
+
+    CONFIG_BLE_BLUEDROID_SDP_DEBUG_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_SDP_DEBUG_LOG_PRESERVE
+    SDP_TRACE_DEBUG
+
+    # RFCOMM Layer
+    CONFIG_BLE_BLUEDROID_RFCOMM_ERROR_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_RFCOMM_ERROR_LOG_PRESERVE
+    RFCOMM_TRACE_ERROR
+
+    CONFIG_BLE_BLUEDROID_RFCOMM_WARNING_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_RFCOMM_WARNING_LOG_PRESERVE
+    RFCOMM_TRACE_WARNING
+
+    CONFIG_BLE_BLUEDROID_RFCOMM_API_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_RFCOMM_API_LOG_PRESERVE
+    RFCOMM_TRACE_API
+
+    CONFIG_BLE_BLUEDROID_RFCOMM_EVENT_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_RFCOMM_EVENT_LOG_PRESERVE
+    RFCOMM_TRACE_EVENT
+
+    CONFIG_BLE_BLUEDROID_RFCOMM_DEBUG_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_RFCOMM_DEBUG_LOG_PRESERVE
+    RFCOMM_TRACE_DEBUG
+
+    # BNEP Layer
+    CONFIG_BLE_BLUEDROID_BNEP_ERROR_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_BNEP_ERROR_LOG_PRESERVE
+    BNEP_TRACE_ERROR
+
+    CONFIG_BLE_BLUEDROID_BNEP_WARNING_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_BNEP_WARNING_LOG_PRESERVE
+    BNEP_TRACE_WARNING
+
+    CONFIG_BLE_BLUEDROID_BNEP_API_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_BNEP_API_LOG_PRESERVE
+    BNEP_TRACE_API
+
+    CONFIG_BLE_BLUEDROID_BNEP_EVENT_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_BNEP_EVENT_LOG_PRESERVE
+    BNEP_TRACE_EVENT
+
+    CONFIG_BLE_BLUEDROID_BNEP_DEBUG_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_BNEP_DEBUG_LOG_PRESERVE
+    BNEP_TRACE_DEBUG
+
+    # PAN Layer
+    CONFIG_BLE_BLUEDROID_PAN_ERROR_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_PAN_ERROR_LOG_PRESERVE
+    PAN_TRACE_ERROR
+
+    CONFIG_BLE_BLUEDROID_PAN_WARNING_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_PAN_WARNING_LOG_PRESERVE
+    PAN_TRACE_WARNING
+
+    CONFIG_BLE_BLUEDROID_PAN_API_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_PAN_API_LOG_PRESERVE
+    PAN_TRACE_API
+
+    CONFIG_BLE_BLUEDROID_PAN_EVENT_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_PAN_EVENT_LOG_PRESERVE
+    PAN_TRACE_EVENT
+
+    CONFIG_BLE_BLUEDROID_PAN_DEBUG_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_PAN_DEBUG_LOG_PRESERVE
+    PAN_TRACE_DEBUG
+
+    # A2D Layer
+    CONFIG_BLE_BLUEDROID_A2D_ERROR_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_A2D_ERROR_LOG_PRESERVE
+    A2D_TRACE_ERROR
+
+    CONFIG_BLE_BLUEDROID_A2D_WARNING_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_A2D_WARNING_LOG_PRESERVE
+    A2D_TRACE_WARNING
+
+    CONFIG_BLE_BLUEDROID_A2D_API_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_A2D_API_LOG_PRESERVE
+    A2D_TRACE_API
+
+    CONFIG_BLE_BLUEDROID_A2D_EVENT_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_A2D_EVENT_LOG_PRESERVE
+    A2D_TRACE_EVENT
+
+    CONFIG_BLE_BLUEDROID_A2D_DEBUG_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_A2D_DEBUG_LOG_PRESERVE
+    A2D_TRACE_DEBUG
+
+    # AVDT Layer
+    CONFIG_BLE_BLUEDROID_AVDT_ERROR_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_AVDT_ERROR_LOG_PRESERVE
+    AVDT_TRACE_ERROR
+
+    CONFIG_BLE_BLUEDROID_AVDT_WARNING_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_AVDT_WARNING_LOG_PRESERVE
+    AVDT_TRACE_WARNING
+
+    CONFIG_BLE_BLUEDROID_AVDT_API_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_AVDT_API_LOG_PRESERVE
+    AVDT_TRACE_API
+
+    CONFIG_BLE_BLUEDROID_AVDT_EVENT_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_AVDT_EVENT_LOG_PRESERVE
+    AVDT_TRACE_EVENT
+
+    CONFIG_BLE_BLUEDROID_AVDT_DEBUG_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_AVDT_DEBUG_LOG_PRESERVE
+    AVDT_TRACE_DEBUG
+
+    # AVCT Layer
+    CONFIG_BLE_BLUEDROID_AVCT_ERROR_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_AVCT_ERROR_LOG_PRESERVE
+    AVCT_TRACE_ERROR
+
+    CONFIG_BLE_BLUEDROID_AVCT_WARNING_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_AVCT_WARNING_LOG_PRESERVE
+    AVCT_TRACE_WARNING
+
+    CONFIG_BLE_BLUEDROID_AVCT_API_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_AVCT_API_LOG_PRESERVE
+    AVCT_TRACE_API
+
+    CONFIG_BLE_BLUEDROID_AVCT_EVENT_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_AVCT_EVENT_LOG_PRESERVE
+    AVCT_TRACE_EVENT
+
+    CONFIG_BLE_BLUEDROID_AVCT_DEBUG_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_AVCT_DEBUG_LOG_PRESERVE
+    AVCT_TRACE_DEBUG
+
+    # AVRC Layer
+    CONFIG_BLE_BLUEDROID_AVRC_ERROR_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_AVRC_ERROR_LOG_PRESERVE
+    AVRC_TRACE_ERROR
+
+    CONFIG_BLE_BLUEDROID_AVRC_WARNING_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_AVRC_WARNING_LOG_PRESERVE
+    AVRC_TRACE_WARNING
+
+    CONFIG_BLE_BLUEDROID_AVRC_API_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_AVRC_API_LOG_PRESERVE
+    AVRC_TRACE_API
+
+    CONFIG_BLE_BLUEDROID_AVRC_EVENT_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_AVRC_EVENT_LOG_PRESERVE
+    AVRC_TRACE_EVENT
+
+    CONFIG_BLE_BLUEDROID_AVRC_DEBUG_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_AVRC_DEBUG_LOG_PRESERVE
+    AVRC_TRACE_DEBUG
+
+    # MCA Layer
+    CONFIG_BLE_BLUEDROID_MCA_ERROR_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_MCA_ERROR_LOG_PRESERVE
+    MCA_TRACE_ERROR
+
+    CONFIG_BLE_BLUEDROID_MCA_WARNING_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_MCA_WARNING_LOG_PRESERVE
+    MCA_TRACE_WARNING
+
+    CONFIG_BLE_BLUEDROID_MCA_API_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_MCA_API_LOG_PRESERVE
+    MCA_TRACE_API
+
+    CONFIG_BLE_BLUEDROID_MCA_EVENT_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_MCA_EVENT_LOG_PRESERVE
+    MCA_TRACE_EVENT
+
+    CONFIG_BLE_BLUEDROID_MCA_DEBUG_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_MCA_DEBUG_LOG_PRESERVE
+    MCA_TRACE_DEBUG
+
+    # HIDH Layer
+    CONFIG_BLE_BLUEDROID_HIDH_ERROR_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_HIDH_ERROR_LOG_PRESERVE
+    HIDH_TRACE_ERROR
+
+    CONFIG_BLE_BLUEDROID_HIDH_WARNING_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_HIDH_WARNING_LOG_PRESERVE
+    HIDH_TRACE_WARNING
+
+    CONFIG_BLE_BLUEDROID_HIDH_API_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_HIDH_API_LOG_PRESERVE
+    HIDH_TRACE_API
+
+    CONFIG_BLE_BLUEDROID_HIDH_EVENT_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_HIDH_EVENT_LOG_PRESERVE
+    HIDH_TRACE_EVENT
+
+    CONFIG_BLE_BLUEDROID_HIDH_DEBUG_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_HIDH_DEBUG_LOG_PRESERVE
+    HIDH_TRACE_DEBUG
+
+    # HIDD Layer
+    CONFIG_BLE_BLUEDROID_HIDD_ERROR_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_HIDD_ERROR_LOG_PRESERVE
+    HIDD_TRACE_ERROR
+
+    CONFIG_BLE_BLUEDROID_HIDD_WARNING_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_HIDD_WARNING_LOG_PRESERVE
+    HIDD_TRACE_WARNING
+
+    CONFIG_BLE_BLUEDROID_HIDD_API_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_HIDD_API_LOG_PRESERVE
+    HIDD_TRACE_API
+
+    CONFIG_BLE_BLUEDROID_HIDD_EVENT_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_HIDD_EVENT_LOG_PRESERVE
+    HIDD_TRACE_EVENT
+
+    CONFIG_BLE_BLUEDROID_HIDD_DEBUG_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_HIDD_DEBUG_LOG_PRESERVE
+    HIDD_TRACE_DEBUG
+
+    CONFIG_BLE_BLUEDROID_HIDD_VERBOSE_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_HIDD_VERBOSE_LOG_PRESERVE
+    HIDD_TRACE_VERBOSE
+
+    # BTIF Layer
+    CONFIG_BLE_BLUEDROID_BTIF_ERROR_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_BTIF_ERROR_LOG_PRESERVE
+    BTIF_TRACE_ERROR
+
+    CONFIG_BLE_BLUEDROID_BTIF_WARNING_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_BTIF_WARNING_LOG_PRESERVE
+    BTIF_TRACE_WARNING
+
+    CONFIG_BLE_BLUEDROID_BTIF_API_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_BTIF_API_LOG_PRESERVE
+    BTIF_TRACE_API
+
+    CONFIG_BLE_BLUEDROID_BTIF_EVENT_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_BTIF_EVENT_LOG_PRESERVE
+    BTIF_TRACE_EVENT
+
+    CONFIG_BLE_BLUEDROID_BTIF_DEBUG_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_BTIF_DEBUG_LOG_PRESERVE
+    BTIF_TRACE_DEBUG
+
+    CONFIG_BLE_BLUEDROID_BTIF_VERBOSE_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_BTIF_VERBOSE_LOG_PRESERVE
+    BTIF_TRACE_VERBOSE
+
+    # BTC Layer
+    CONFIG_BLE_BLUEDROID_BTC_ERROR_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_BTC_ERROR_LOG_PRESERVE
+    BTC_TRACE_ERROR
+
+    CONFIG_BLE_BLUEDROID_BTC_WARNING_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_BTC_WARNING_LOG_PRESERVE
+    BTC_TRACE_WARNING
+
+    CONFIG_BLE_BLUEDROID_BTC_API_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_BTC_API_LOG_PRESERVE
+    BTC_TRACE_API
+
+    CONFIG_BLE_BLUEDROID_BTC_EVENT_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_BTC_EVENT_LOG_PRESERVE
+    BTC_TRACE_EVENT
+
+    CONFIG_BLE_BLUEDROID_BTC_DEBUG_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_BTC_DEBUG_LOG_PRESERVE
+    BTC_TRACE_DEBUG
+
+    CONFIG_BLE_BLUEDROID_BTC_VERBOSE_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_BTC_VERBOSE_LOG_PRESERVE
+    BTC_TRACE_VERBOSE
+
+    # OSI Layer
+    CONFIG_BLE_BLUEDROID_OSI_ERROR_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_OSI_ERROR_LOG_PRESERVE
+    OSI_TRACE_ERROR
+
+    CONFIG_BLE_BLUEDROID_OSI_WARNING_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_OSI_WARNING_LOG_PRESERVE
+    OSI_TRACE_WARNING
+
+    CONFIG_BLE_BLUEDROID_OSI_API_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_OSI_API_LOG_PRESERVE
+    OSI_TRACE_API
+
+    CONFIG_BLE_BLUEDROID_OSI_EVENT_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_OSI_EVENT_LOG_PRESERVE
+    OSI_TRACE_EVENT
+
+    CONFIG_BLE_BLUEDROID_OSI_DEBUG_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_OSI_DEBUG_LOG_PRESERVE
+    OSI_TRACE_DEBUG
+
+    CONFIG_BLE_BLUEDROID_OSI_VERBOSE_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_OSI_VERBOSE_LOG_PRESERVE
+    OSI_TRACE_VERBOSE
+
+    # BLUFI Layer
+    CONFIG_BLE_BLUEDROID_BLUFI_ERROR_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_BLUFI_ERROR_LOG_PRESERVE
+    BLUFI_TRACE_ERROR
+
+    CONFIG_BLE_BLUEDROID_BLUFI_WARNING_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_BLUFI_WARNING_LOG_PRESERVE
+    BLUFI_TRACE_WARNING
+
+    CONFIG_BLE_BLUEDROID_BLUFI_API_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_BLUFI_API_LOG_PRESERVE
+    BLUFI_TRACE_API
+
+    CONFIG_BLE_BLUEDROID_BLUFI_EVENT_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_BLUFI_EVENT_LOG_PRESERVE
+    BLUFI_TRACE_EVENT
+
+    CONFIG_BLE_BLUEDROID_BLUFI_DEBUG_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_BLUFI_DEBUG_LOG_PRESERVE
+    BLUFI_TRACE_DEBUG
+
+    CONFIG_BLE_BLUEDROID_BLUFI_VERBOSE_LOG_COMPRESSION
+    CONFIG_BLE_BLUEDROID_BLUFI_VERBOSE_LOG_PRESERVE
+    BLUFI_TRACE_VERBOSE
+
 )
 
 include(${CMAKE_CURRENT_LIST_DIR}/tag_table_function.cmake)

components/bt/common/ble_log/extension/log_compression/host/Kconfig.host.in

@@ -0,0 +1,26 @@
+
+menuconfig BLE_HOST_COMPRESSED_LOG_ENABLE
+    bool "Enable BLE Host log compression(Preview)"
+    depends on BLE_COMPRESSED_LOG_ENABLE
+    depends on BT_BLUEDROID_ENABLED || BT_NIMBLE_ENABLED
+    default n
+    help
+            Apply compression to host logs. Requires
+            base BLE compression to be enabled. Specifically optimizes log
+            storage and transmission.
+
+            Note: This library depends on additional Python packages. It will
+            function correctly only after these dependencies are installed;
+            refer to:
+            "components/bt/common/ble_log/log_compression/README.en.md"
+            for installation instructions.
+
+config BLE_HOST_COMPRESSED_LOG_BUFFER_LEN
+    int "Host log buffer length"
+    depends on BLE_HOST_COMPRESSED_LOG_ENABLE
+    default 300
+    help
+                Maximum output length for a single log
+
+source "$IDF_PATH/components/bt/common/ble_log/extension/log_compression/host/Kconfig.host.bluedroid.in"
+source "$IDF_PATH/components/bt/common/ble_log/extension/log_compression/host/Kconfig.host.nimble.in"

components/bt/common/ble_log/extension/log_compression/host/Kconfig.host.nimble.in

@@ -0,0 +1,3 @@
+
+if BLE_HOST_COMPRESSED_LOG_ENABLE && BT_NIMBLE_ENABLED
+endif

components/bt/common/ble_log/extension/log_compression/iso/audio/Kconfig.iso.in

@@ -0,0 +1,28 @@
+
+menuconfig BLE_ISO_COMPRESSED_LOG_ENABLE
+    bool "Enable BLE Audio/ISO log compression(Preview)"
+    depends on BLE_COMPRESSED_LOG_ENABLE
+    depends on BT_ISO
+    default n
+    help
+            Apply compression to BLE Audio/ISO protocol stack logs. Requires
+            base BLE compression to be enabled. Specifically optimizes log
+            storage and transmission for BLE Audio and ISO.
+
+            Note: This library depends on additional Python packages. It will
+            function correctly only after these dependencies are installed;
+            refer to:
+            "components/bt/common/ble_log/log_compression/README.en.md"
+            for installation instructions.
+
+            If the required packages are not installed, the log-compression
+            mechanism will remain disabled even when this Config is enabled.
+
+config BLE_ISO_COMPRESSED_LOG_BUFFER_LEN
+    int "BLE Audio/ISO log buffer length"
+    depends on BLE_ISO_COMPRESSED_LOG_ENABLE
+    default 300
+    help
+            Maximum output length for a single log
+
+source "$IDF_PATH/components/bt/common/ble_log/extension/log_compression/iso/audio/Kconfig.iso.tags.in"

components/bt/common/ble_log/extension/log_compression/iso/audio/Kconfig.iso.tags.in

@@ -0,0 +1,62 @@
+if BLE_ISO_COMPRESSED_LOG_ENABLE
+    menu "Select the Audio/ISO stack log tag to be compressed"
+        config BLE_ISO_STACK_ERR_LOG_COMPRESSION
+            bool "Compress ERROR log of BLE Audio/ISO"
+            default y
+            help
+                    The error log in the BLE Audio/ISO component will be compressed
+        config BLE_ISO_STACK_ERR_LOG_PRESERVE
+            bool "Keep the original error log statement"
+            depends on BLE_ISO_STACK_ERR_LOG_COMPRESSION
+            default y
+            help
+                    When this option is enabled, the log data will be output
+                    through both the compressed log interface and the original
+                    UART interface at the same time, meaning that the log
+                    statements will appear on both paths. However, please note
+                    that this dual-output approach introduces additional code
+                    and string constants, which will increase the size of the
+                    firmware binary file. When this option is disabled, the
+                    logs will no longer be printed through the original UART
+                    output path; instead, they will only be output through the
+                    compressed log interface. As the code and strings related
+                    to the original UART output are omitted, the size of the
+                    firmware binary file can be effectively reduced.
+
+        config BLE_ISO_STACK_WARN_LOG_COMPRESSION
+            bool "Compress WARN log of BLE Audio/ISO"
+            default y
+            help
+                    The warn log in the BLE Audio/ISO component will be compressed
+        config BLE_ISO_STACK_WARN_LOG_PRESERVE
+            bool "Keep the original warn log statement"
+            depends on BLE_ISO_STACK_WARN_LOG_COMPRESSION
+            default y
+            help
+                    Please refer to the help information in BLE_ISO_STACK_ERR_LOG_PRESERVE
+
+        config BLE_ISO_STACK_INFO_LOG_COMPRESSION
+            bool "Compress INFO log of BLE Audio/ISO"
+            default y
+            help
+                    The info log in the BLE Audio/ISO component will be compressed
+        config BLE_ISO_STACK_INFO_LOG_PRESERVE
+            bool "Keep the original info log statement"
+            depends on BLE_ISO_STACK_INFO_LOG_COMPRESSION
+            default n
+            help
+                    Please refer to the help information in BLE_ISO_STACK_ERR_LOG_PRESERVE
+
+        config BLE_ISO_STACK_DEBUG_LOG_COMPRESSION
+            bool "Compress DEBUG log of BLE Audio/ISO"
+            default y
+            help
+                    The debug log in the BLE Audio/ISO component will be compressed
+        config BLE_ISO_STACK_DEBUG_LOG_PRESERVE
+            bool "Keep the original debug log statement"
+            depends on BLE_ISO_STACK_DEBUG_LOG_COMPRESSION
+            default n
+            help
+                    Please refer to the help information in BLE_ISO_STACK_ERR_LOG_PRESERVE
+    endmenu
+endif

components/bt/common/ble_log/extension/log_compression/profile/mesh/Kconfig.mesh.in

@@ -0,0 +1,28 @@
+
+menuconfig BLE_MESH_COMPRESSED_LOG_ENABLE
+    bool "Enable BLE Mesh log compression(Preview)"
+    depends on BLE_COMPRESSED_LOG_ENABLE
+    depends on BLE_MESH
+    default n
+    help
+            Apply compression to ESP-BLE-MESH protocol stack logs. Requires
+            base BLE compression to be enabled. Specifically optimizes log
+            storage and transmission for ble mesh.
+
+            Note: This library depends on additional Python packages. It will
+            function correctly only after these dependencies are installed;
+            refer to:
+            "components/bt/common/ble_log/log_compression/README.en.md"
+            for installation instructions.
+
+            If the required packages are not installed, the log-compression
+            mechanism will remain disabled even when this Config is enabled.
+
+config BLE_MESH_COMPRESSED_LOG_BUFFER_LEN
+    int "BLE Mesh log buffer length"
+    depends on BLE_MESH_COMPRESSED_LOG_ENABLE
+    default 400
+    help
+            Maximum output length for a single log
+
+source "$IDF_PATH/components/bt/common/ble_log/extension/log_compression/profile/mesh/Kconfig.mesh.tags.in"

components/bt/common/ble_log/extension/log_compression/profile/mesh/Kconfig.mesh.tags.in

@@ -0,0 +1,117 @@
+if BLE_MESH_COMPRESSED_LOG_ENABLE
+    menu "Select the stack log tag to be compressed"
+        config BLE_MESH_STACK_ERR_LOG_COMPRESSION
+            bool "Compress ERROR log of ESP-BLE-MESH"
+            default y
+            help
+                    The error log in the BLE-MESH component will be compressed
+        config BLE_MESH_STACK_ERR_LOG_PRESERVE
+            bool "Keep the original error log statement"
+            depends on BLE_MESH_STACK_ERR_LOG_COMPRESSION
+            default y
+            help
+                    When this option is enabled, the log data will be output
+                    through both the compressed log interface and the original
+                    UART interface at the same time, meaning that the log
+                    statements will appear on both paths. However, please note
+                    that this dual-output approach introduces additional code
+                    and string constants, which will increase the size of the
+                    firmware binary file. When this option is disabled, the
+                    logs will no longer be printed through the original UART
+                    output path; instead, they will only be output through the
+                    compressed log interface. As the code and strings related
+                    to the original UART output are omitted, the size of the
+                    firmware binary file can be effectively reduced.
+
+        config BLE_MESH_STACK_WARN_LOG_COMPRESSION
+            bool "Compress warn log of ESP-BLE-MESH"
+            default y
+            help
+                    The warn log in the BLE-MESH component will be compressed
+        config BLE_MESH_STACK_WARN_LOG_PRESERVE
+            bool "Keep the original warn log statement"
+            depends on BLE_MESH_STACK_WARN_LOG_COMPRESSION
+            default y
+            help
+                    Please refer to the help information in BLE_MESH_STACK_ERR_LOG_PRESERVE
+        config BLE_MESH_STACK_INFO_LOG_COMPRESSION
+            bool "Compress info log of ESP-BLE-MESH"
+            default y
+            help
+                    The info log in the BLE-MESH component will be compressed
+        config BLE_MESH_STACK_INFO_LOG_PRESERVE
+            bool "Keep the original info log statement"
+            depends on BLE_MESH_STACK_INFO_LOG_COMPRESSION
+            default n
+            help
+                    Please refer to the help information in BLE_MESH_STACK_ERR_LOG_PRESERVE
+        config BLE_MESH_STACK_DEBUG_LOG_COMPRESSION
+            bool "Compress debug log of ESP-BLE-MESH"
+            default y
+            help
+                    The debug log in the BLE-MESH component will be compressed
+        config BLE_MESH_STACK_DEBUG_LOG_PRESERVE
+            bool "Keep the original debug log statement"
+            depends on BLE_MESH_STACK_DEBUG_LOG_COMPRESSION
+            default n
+            help
+                    Please refer to the help information in BLE_MESH_STACK_ERR_LOG_PRESERVE
+    endmenu
+    menu "Select the net buf log tag to be compressed"
+        config BLE_MESH_NET_BUF_ERR_LOG_COMPRESSION
+            bool "Compress ERROR log of ESP-BLE-MESH"
+            default y
+            help
+                    The error log in the BLE-MESH component will be compressed
+        config BLE_MESH_NET_BUF_ERR_LOG_PRESERVE
+            bool "Keep the original error log statement"
+            depends on BLE_MESH_NET_BUF_ERR_LOG_COMPRESSION
+            default y
+            help
+                    When this option is enabled, the log data will be output
+                    through both the compressed log interface and the original
+                    UART interface at the same time, meaning that the log
+                    statements will appear on both paths. However, please note
+                    that this dual-output approach introduces additional code
+                    and string constants, which will increase the size of the
+                    firmware binary file. When this option is disabled, the
+                    logs will no longer be printed through the original UART
+                    output path; instead, they will only be output through the
+                    compressed log interface. As the code and strings related
+                    to the original UART output are omitted, the size of the
+                    firmware binary file can be effectively reduced.
+        config BLE_MESH_NET_BUF_WARN_LOG_COMPRESSION
+            bool "Compress warn log of ESP-BLE-MESH"
+            default y
+            help
+                    The warn log in the BLE-MESH component will be compressed
+        config BLE_MESH_NET_BUF_WARN_LOG_PRESERVE
+            bool "Keep the original warn log statement"
+            depends on BLE_MESH_NET_BUF_WARN_LOG_COMPRESSION
+            default y
+            help
+                    Please refer to the help information in BLE_MESH_NET_BUF_ERR_LOG_PRESERVE
+        config BLE_MESH_NET_BUF_INFO_LOG_COMPRESSION
+            bool "Compress info log of ESP-BLE-MESH"
+            default y
+            help
+                    The info log in the BLE-MESH component will be compressed
+        config BLE_MESH_NET_BUF_INFO_LOG_PRESERVE
+            bool "Keep the original info log statement"
+            depends on BLE_MESH_NET_BUF_INFO_LOG_COMPRESSION
+            default n
+            help
+                    Please refer to the help information in BLE_MESH_NET_BUF_ERR_LOG_PRESERVE
+        config BLE_MESH_NET_BUF_DEBUG_LOG_COMPRESSION
+            bool "Compress debug log of ESP-BLE-MESH"
+            default y
+            help
+                    The debug log in the BLE-MESH component will be compressed
+        config BLE_MESH_NET_BUF_DEBUG_LOG_PRESERVE
+            bool "Keep the original debug log statement"
+            depends on BLE_MESH_NET_BUF_DEBUG_LOG_COMPRESSION
+            default n
+            help
+                    Please refer to the help information in BLE_MESH_NET_BUF_ERR_LOG_PRESERVE
+    endmenu
+endif

components/bt/common/ble_log/extension/log_compression/scripts/ble_log_compress.py

@@ -295,7 +295,7 @@ class LogCompressor:
                     logs.append(log_info)
             except Exception as e:
                 LOGGER.error(f'Error processing log node: {e}\n{traceback.format_exc()}')
-                raise
+                continue
 
         return logs
 

components/bt/common/ble_log/extension/log_compression/scripts/module_scripts/bluedroid/make_bluedroid_log_macro.py

@@ -9,6 +9,22 @@ BLUEDROID_LOG_MODE_LEVEL_GET = {
     'GATT': 'gatt_cb.trace_level',
     'SMP': 'smp_cb.trace_level',
     'APPL': 'appl_trace_level',
+    'HCI': 'HCI_INITIAL_TRACE_LEVEL',
+    'SDP': 'sdp_cb.trace_level',
+    'RFCOMM': 'rfc_cb.trace_level',
+    'BNEP': 'bnep_cb.trace_level',
+    'PAN': 'pan_cb.trace_level',
+    'A2D': 'a2d_cb.trace_level',
+    'AVDT': 'avdt_cb.trace_level',
+    'AVCT': 'avct_cb.trace_level',
+    'AVRC': 'avrc_cb.trace_level',
+    'MCA': 'mca_cb.trace_level',
+    'HIDH': 'hh_cb.trace_level',
+    'HIDD': 'hd_cb.trace_level',
+    'BTIF': 'btif_trace_level',
+    'BTC': 'BTC_INITIAL_TRACE_LEVEL',
+    'OSI': 'OSI_INITIAL_TRACE_LEVEL',
+    'BLUFI': 'BLUFI_INITIAL_TRACE_LEVEL',
 }