feat(hal):graudate the LCD hal driver into a new component

- Introduced new HAL components for LCD and MIPI DSI, including:
  - `lcd_hal.c` and `lcd_hal.h` for LCD hardware abstraction layer.
  - `mipi_dsi_hal.c` and `mipi_dsi_hal.h` for MIPI DSI hardware
abstraction layer.
  - Peripheral connection definitions in `lcd_periph.c` and
`lcd_periph.h`.
  - Added necessary types and utility functions in `lcd_types.h` and
`mipi_dsi_types.h`.

- Updated CMakeLists to include the new HAL components in the build
system.
- Removed legacy references to LCD and MIPI DSI in the HAL and SOC
CMakeLists.

components/soc/esp32/include/soc/Kconfig.soc_caps.in

@@ -87,6 +87,14 @@ config SOC_I2S_SUPPORTED
     bool
     default y
 
+config SOC_I2S_I80_LCD_SUPPORTED
+    bool
+    default y
+
+config SOC_LCD_I80_SUPPORTED
+    bool
+    default y
+
 config SOC_RMT_SUPPORTED
     bool
     default y
@@ -419,22 +427,6 @@ config SOC_I2S_PDM_MAX_RX_LINES
     int
     default 1
 
-config SOC_I2S_SUPPORTS_LCD_CAMERA
-    bool
-    default y
-
-config SOC_LCD_I80_SUPPORTED
-    bool
-    default y
-
-config SOC_LCD_I80_BUSES
-    int
-    default 2
-
-config SOC_LCD_I80_BUS_WIDTH
-    int
-    default 24
-
 config SOC_LEDC_HAS_TIMER_SPECIFIC_MUX
     bool
     default y

components/soc/esp32/include/soc/soc_caps.h

@@ -87,6 +87,8 @@
 #define SOC_RTC_SLOW_MEM_SUPPORTED  1
 #define SOC_RTC_MEM_SUPPORTED       1
 #define SOC_I2S_SUPPORTED           1
+#define SOC_I2S_I80_LCD_SUPPORTED   1
+#define SOC_LCD_I80_SUPPORTED       1
 #define SOC_RMT_SUPPORTED           1
 #define SOC_SDM_SUPPORTED           1
 #define SOC_GPSPI_SUPPORTED         1
@@ -226,13 +228,6 @@
 #define SOC_I2S_SUPPORTS_PDM2PCM    (1)     // Support to input PDM format but read PCM format data with the help of PDM to PCM filter
 #define SOC_I2S_PDM_MAX_TX_LINES    (1U)
 #define SOC_I2S_PDM_MAX_RX_LINES    (1U)
-#define SOC_I2S_SUPPORTS_LCD_CAMERA (1)
-
-/*-------------------------- LCD CAPS ----------------------------------------*/
-/* Notes: On esp32, LCD intel 8080 timing is generated by I2S peripheral */
-#define SOC_LCD_I80_SUPPORTED      (1)  /*!< Intel 8080 LCD is supported */
-#define SOC_LCD_I80_BUSES          (2)  /*!< Both I2S0/1 have LCD mode */
-#define SOC_LCD_I80_BUS_WIDTH      (24) /*!< Intel 8080 bus width */
 
 /*-------------------------- LEDC CAPS ---------------------------------------*/
 #define SOC_LEDC_HAS_TIMER_SPECIFIC_MUX  (1)

components/soc/esp32/include/soc/soc_caps_full.h

@@ -22,9 +22,6 @@
 /*------------------------------- I2S ---------------------------------------*/
 // helper macros to access module attributes
 #define _SOC_CAPS_I2S_INST_NUM                    2  // Number of I2S instances
-#define _SOC_CAPS_I2S_MAX_DATA_WIDTH              24 // Maximum data line width of I2S
-#define _SOC_CAPS_I2S_TRANS_SIZE_ALIGN_WORD       1  // I2S DMA transfer size must be aligned to word
-#define _SOC_CAPS_I2S_SUPPORT_ADC_DAC             1  // I2S supports to connect to ADC / DAC converters
 
 /*------------------------------- Touch Sensor ------------------------------------*/
 #define _SOC_CAPS_TOUCH_CHAN_NUM                  10 // Number of touch sensor channels