Mirrors/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2026-10-02 03:00:34 +03:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'bugfix/fix_ble_read_remote_feature_timeout_v5.3' into 'release/v5.3'

Browse Source 
Fixed read remote feature timeout when using coded phy(2f683593) (5.3)

See merge request espressif/esp-idf!48061
This commit is contained in:
Island
2026-05-12 18:01:44 +08:00
parent 47f2059950 98312614ba
commit cd34546970
14 changed files with 125 additions and 39 deletions
Download Patch File Download Diff File Expand all files Collapse all files
components/bt/controller/esp32c3/Kconfig.in
+25
View File
@@ -561,6 +561,31 @@ config BT_CTRL_CHECK_CONNECT_IND_ACCESS_ADDRESS
This improves security by ensuring that only connection requests with valid Access Addresses are accepted.
If disabled, only basic checks are applied, improving compatibility.
config BT_CTRL_BLE_MIN_CONN_INTERVAL_ENABLE
bool "Allow BLE connection interval below the spec minimum"
default y
select BT_BLE_HOST_ALLOW_SUB_SPEC_MIN_CONN_INT if BT_BLUEDROID_ENABLED
help
Enabling this option allows the BLE controller to use a connection interval
smaller than the Bluetooth Core specification minimum of 7.5 ms. On
ESP32-C3/S3, when this option is enabled, the connection interval can go as
low as 3 * 1.25 ms = 3.75 ms.
Note: Because the connection interval is very short, the time available within
a single connection event is also very limited. It is best not to send or
receive long payloads (e.g. large ATT MTU, Data Length Extension with large
Tx/Rx octets) when this lower interval is used.
This option is enabled by default. Disable it to stay compliant with the BLE
specification (minimum connection interval 7.5 ms).
Host stack: When Bluedroid is the BLE host, enabling this option also selects
BT_BLE_HOST_ALLOW_SUB_SPEC_MIN_CONN_INT so the host accepts connection
intervals below the spec minimum. NimBLE host does not provide equivalent
support yet; it is planned for a future release. Until then, use Bluedroid
if you need coordinated host and controller behavior for sub-minimum
intervals.
menu "Controller debug log Options (Experimental)"
config BT_CTRL_LE_LOG_EN
depends on BT_CTRL_RUN_IN_FLASH_ONLY
components/bt/controller/esp32c3/bt.c
+4
View File
@@ -308,6 +308,7 @@ extern void ets_backup_dma_copy(uint32_t reg, uint32_t mem_addr, uint32_t num, b
extern void btdm_cca_feature_enable(void);
extern void btdm_aa_check_enhance_enable(void);
extern void ble_min_conn_interval_enable(uint16_t min_interval);
/* BLE Log module */
#if CONFIG_BT_CTRL_LE_LOG_EN
@@ -1347,6 +1348,9 @@ static void btdm_funcs_table_ready_wrapper(void)
#if BLE_CTRL_CHECK_CONNECT_IND_ACCESS_ADDRESS_ENABLED
btdm_aa_check_enhance_enable();
#endif
#if CONFIG_BT_CTRL_BLE_MIN_CONN_INTERVAL_ENABLE
ble_min_conn_interval_enable(3); // 3 * 1.25 = 3.75ms
#endif
#if CONFIG_BT_CTRL_RUN_IN_FLASH_ONLY
// do nothing
#else
components/bt/controller/lib_esp32c3_family
+1 -1
Submodule components/bt/controller/lib_esp32c3_family updated: ebd6043a8e...58d499bba1
components/bt/host/bluedroid/Kconfig.in
+17
View File
@@ -1272,6 +1272,23 @@ config BT_BLE_RPA_TIMEOUT
This set RPA timeout of Controller and Host.
Default is 900 s (15 minutes). Range is 1 s to 1 hour (3600 s).
config BT_BLE_HOST_ALLOW_SUB_SPEC_MIN_CONN_INT
bool "Allow BLE connection interval below Bluetooth Core Spec minimum (disable host check)"
depends on BT_BLE_ENABLED
default n
help
When enabled, the Bluedroid host skips the minimum BLE connection
interval validation (Bluetooth Core Spec minimum is 0x0006 / 7.5 ms)
and accepts any non-zero interval value from the application. The
BLE controller then enforces what is actually allowed; how small the
connection interval may be depends on controller capability and its
own configuration, not on this host option text.
End users should NOT set this option directly. In typical IDF builds it
follows the active Controller integration when that Controller supports
this mode; use the Controller's own configuration (menu entries and symbol
names differ by chip) instead of toggling this host symbol manually.
menuconfig BT_BLE_50_FEATURES_SUPPORTED
bool "Enable BLE 5.0 and above features(please disable BLE 4.2 if enable BLE 5.0)"
depends on (BT_BLE_ENABLED && ((BT_CONTROLLER_ENABLED && SOC_BLE_50_SUPPORTED) || BT_CONTROLLER_DISABLED))
components/bt/host/bluedroid/api/esp_gap_ble_api.c
+10 -10
View File
@@ -154,8 +154,8 @@ esp_err_t esp_ble_gap_update_conn_params(esp_ble_conn_update_params_t *params)
return ESP_FAIL;
}
if (ESP_BLE_IS_VALID_PARAM(params->min_int, ESP_BLE_CONN_INT_MIN, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(params->max_int, ESP_BLE_CONN_INT_MIN, ESP_BLE_CONN_INT_MAX) &&
if (ESP_BLE_IS_VALID_PARAM(params->min_int, BLE_CONN_INT_MIN_HOST_CHECK, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(params->max_int, BLE_CONN_INT_MIN_HOST_CHECK, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(params->timeout, ESP_BLE_CONN_SUP_TOUT_MIN, ESP_BLE_CONN_SUP_TOUT_MAX) &&
(params->latency <= ESP_BLE_CONN_LATENCY_MAX) &&
((params->timeout * 10) >= ((1 + params->latency) * ((params->max_int * 5) >> 1))) && params->min_int <= params->max_int) {
@@ -393,8 +393,8 @@ esp_err_t esp_ble_gap_set_prefer_conn_params(esp_bd_addr_t bd_addr,
return ESP_ERR_INVALID_ARG;
}
if (ESP_BLE_IS_VALID_PARAM(min_conn_int, ESP_BLE_CONN_INT_MIN, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(max_conn_int, ESP_BLE_CONN_INT_MIN, ESP_BLE_CONN_INT_MAX) &&
if (ESP_BLE_IS_VALID_PARAM(min_conn_int, BLE_CONN_INT_MIN_HOST_CHECK, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(max_conn_int, BLE_CONN_INT_MIN_HOST_CHECK, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(supervision_tout, ESP_BLE_CONN_SUP_TOUT_MIN, ESP_BLE_CONN_SUP_TOUT_MAX) &&
(slave_latency <= ESP_BLE_CONN_LATENCY_MAX) &&
((supervision_tout * 10) >= ((1 + slave_latency) * ((max_conn_int * 5) >> 1))) && min_conn_int <= max_conn_int) {
@@ -1747,8 +1747,8 @@ esp_err_t esp_ble_gap_prefer_ext_connect_params_set(esp_bd_addr_t addr,
return ESP_ERR_INVALID_ARG;
}
if (ESP_BLE_IS_VALID_PARAM(phy_1m_conn_params->interval_min, ESP_BLE_CONN_INT_MIN, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(phy_1m_conn_params->interval_max, ESP_BLE_CONN_INT_MIN, ESP_BLE_CONN_INT_MAX) &&
if (ESP_BLE_IS_VALID_PARAM(phy_1m_conn_params->interval_min, BLE_CONN_INT_MIN_HOST_CHECK, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(phy_1m_conn_params->interval_max, BLE_CONN_INT_MIN_HOST_CHECK, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(phy_1m_conn_params->supervision_timeout, ESP_BLE_CONN_SUP_TOUT_MIN, ESP_BLE_CONN_SUP_TOUT_MAX) &&
(phy_1m_conn_params->latency <= ESP_BLE_CONN_LATENCY_MAX) &&
((phy_1m_conn_params->supervision_timeout * 10) >= ((1 + phy_1m_conn_params->latency) * ((phy_1m_conn_params->interval_max * 5) >> 1))) &&
@@ -1771,8 +1771,8 @@ esp_err_t esp_ble_gap_prefer_ext_connect_params_set(esp_bd_addr_t addr,
return ESP_ERR_INVALID_ARG;
}
if (ESP_BLE_IS_VALID_PARAM(phy_2m_conn_params->interval_min, ESP_BLE_CONN_INT_MIN, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(phy_2m_conn_params->interval_max, ESP_BLE_CONN_INT_MIN, ESP_BLE_CONN_INT_MAX) &&
if (ESP_BLE_IS_VALID_PARAM(phy_2m_conn_params->interval_min, BLE_CONN_INT_MIN_HOST_CHECK, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(phy_2m_conn_params->interval_max, BLE_CONN_INT_MIN_HOST_CHECK, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(phy_2m_conn_params->supervision_timeout, ESP_BLE_CONN_SUP_TOUT_MIN, ESP_BLE_CONN_SUP_TOUT_MAX) &&
(phy_2m_conn_params->latency <= ESP_BLE_CONN_LATENCY_MAX) &&
((phy_2m_conn_params->supervision_timeout * 10) >= ((1 + phy_2m_conn_params->latency) * ((phy_2m_conn_params->interval_max * 5) >> 1))) &&
@@ -1795,8 +1795,8 @@ esp_err_t esp_ble_gap_prefer_ext_connect_params_set(esp_bd_addr_t addr,
return ESP_ERR_INVALID_ARG;
}
if (ESP_BLE_IS_VALID_PARAM(phy_coded_conn_params->interval_min, ESP_BLE_CONN_INT_MIN, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(phy_coded_conn_params->interval_max, ESP_BLE_CONN_INT_MIN, ESP_BLE_CONN_INT_MAX) &&
if (ESP_BLE_IS_VALID_PARAM(phy_coded_conn_params->interval_min, BLE_CONN_INT_MIN_HOST_CHECK, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(phy_coded_conn_params->interval_max, BLE_CONN_INT_MIN_HOST_CHECK, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(phy_coded_conn_params->supervision_timeout, ESP_BLE_CONN_SUP_TOUT_MIN, ESP_BLE_CONN_SUP_TOUT_MAX) &&
(phy_coded_conn_params->latency <= ESP_BLE_CONN_LATENCY_MAX) &&
((phy_coded_conn_params->supervision_timeout * 10) >= ((1 + phy_coded_conn_params->latency) * ((phy_coded_conn_params->interval_max * 5) >> 1))) &&
components/bt/host/bluedroid/api/esp_gattc_api.c
+12 -12
View File
@@ -115,8 +115,8 @@ esp_err_t esp_ble_gattc_enh_open(esp_gatt_if_t gattc_if, esp_ble_gatt_creat_conn
}
conn_params = creat_conn_params->phy_1m_conn_params;
if (ESP_BLE_IS_VALID_PARAM(conn_params->interval_min, ESP_BLE_CONN_INT_MIN, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(conn_params->interval_max, ESP_BLE_CONN_INT_MIN, ESP_BLE_CONN_INT_MAX) &&
if (ESP_BLE_IS_VALID_PARAM(conn_params->interval_min, BLE_CONN_INT_MIN_HOST_CHECK, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(conn_params->interval_max, BLE_CONN_INT_MIN_HOST_CHECK, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(conn_params->supervision_timeout, ESP_BLE_CONN_SUP_TOUT_MIN, ESP_BLE_CONN_SUP_TOUT_MAX) &&
(conn_params->latency <= ESP_BLE_CONN_LATENCY_MAX) &&
((conn_params->supervision_timeout * 10) >= ((1 + conn_params->latency) * ((conn_params->interval_max * 5) >> 1))) &&
@@ -138,8 +138,8 @@ esp_err_t esp_ble_gattc_enh_open(esp_gatt_if_t gattc_if, esp_ble_gatt_creat_conn
}
conn_params = creat_conn_params->phy_2m_conn_params;
if (ESP_BLE_IS_VALID_PARAM(conn_params->interval_min, ESP_BLE_CONN_INT_MIN, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(conn_params->interval_max, ESP_BLE_CONN_INT_MIN, ESP_BLE_CONN_INT_MAX) &&
if (ESP_BLE_IS_VALID_PARAM(conn_params->interval_min, BLE_CONN_INT_MIN_HOST_CHECK, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(conn_params->interval_max, BLE_CONN_INT_MIN_HOST_CHECK, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(conn_params->supervision_timeout, ESP_BLE_CONN_SUP_TOUT_MIN, ESP_BLE_CONN_SUP_TOUT_MAX) &&
(conn_params->latency <= ESP_BLE_CONN_LATENCY_MAX) &&
((conn_params->supervision_timeout * 10) >= ((1 + conn_params->latency) * ((conn_params->interval_max * 5) >> 1))) &&
@@ -161,8 +161,8 @@ esp_err_t esp_ble_gattc_enh_open(esp_gatt_if_t gattc_if, esp_ble_gatt_creat_conn
}
conn_params = creat_conn_params->phy_coded_conn_params;
if (ESP_BLE_IS_VALID_PARAM(conn_params->interval_min, ESP_BLE_CONN_INT_MIN, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(conn_params->interval_max, ESP_BLE_CONN_INT_MIN, ESP_BLE_CONN_INT_MAX) &&
if (ESP_BLE_IS_VALID_PARAM(conn_params->interval_min, BLE_CONN_INT_MIN_HOST_CHECK, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(conn_params->interval_max, BLE_CONN_INT_MIN_HOST_CHECK, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(conn_params->supervision_timeout, ESP_BLE_CONN_SUP_TOUT_MIN, ESP_BLE_CONN_SUP_TOUT_MAX) &&
(conn_params->latency <= ESP_BLE_CONN_LATENCY_MAX) &&
((conn_params->supervision_timeout * 10) >= ((1 + conn_params->latency) * ((conn_params->interval_max * 5) >> 1))) &&
@@ -251,8 +251,8 @@ esp_err_t esp_ble_gattc_aux_open_with_pawr_synced(esp_gatt_if_t gattc_if, esp_bl
}
conn_params = pawr_conn_params->phy_1m_conn_params;
if (ESP_BLE_IS_VALID_PARAM(conn_params->interval_min, ESP_BLE_CONN_INT_MIN, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(conn_params->interval_max, ESP_BLE_CONN_INT_MIN, ESP_BLE_CONN_INT_MAX) &&
if (ESP_BLE_IS_VALID_PARAM(conn_params->interval_min, BLE_CONN_INT_MIN_HOST_CHECK, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(conn_params->interval_max, BLE_CONN_INT_MIN_HOST_CHECK, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(conn_params->supervision_timeout, ESP_BLE_CONN_SUP_TOUT_MIN, ESP_BLE_CONN_SUP_TOUT_MAX) &&
(conn_params->latency <= ESP_BLE_CONN_LATENCY_MAX) &&
((conn_params->supervision_timeout * 10) >= ((1 + conn_params->latency) * ((conn_params->interval_max * 5) >> 1))) &&
@@ -274,8 +274,8 @@ esp_err_t esp_ble_gattc_aux_open_with_pawr_synced(esp_gatt_if_t gattc_if, esp_bl
}
conn_params = pawr_conn_params->phy_2m_conn_params;
if (ESP_BLE_IS_VALID_PARAM(conn_params->interval_min, ESP_BLE_CONN_INT_MIN, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(conn_params->interval_max, ESP_BLE_CONN_INT_MIN, ESP_BLE_CONN_INT_MAX) &&
if (ESP_BLE_IS_VALID_PARAM(conn_params->interval_min, BLE_CONN_INT_MIN_HOST_CHECK, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(conn_params->interval_max, BLE_CONN_INT_MIN_HOST_CHECK, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(conn_params->supervision_timeout, ESP_BLE_CONN_SUP_TOUT_MIN, ESP_BLE_CONN_SUP_TOUT_MAX) &&
(conn_params->latency <= ESP_BLE_CONN_LATENCY_MAX) &&
((conn_params->supervision_timeout * 10) >= ((1 + conn_params->latency) * ((conn_params->interval_max * 5) >> 1))) &&
@@ -297,8 +297,8 @@ esp_err_t esp_ble_gattc_aux_open_with_pawr_synced(esp_gatt_if_t gattc_if, esp_bl
}
conn_params = pawr_conn_params->phy_coded_conn_params;
if (ESP_BLE_IS_VALID_PARAM(conn_params->interval_min, ESP_BLE_CONN_INT_MIN, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(conn_params->interval_max, ESP_BLE_CONN_INT_MIN, ESP_BLE_CONN_INT_MAX) &&
if (ESP_BLE_IS_VALID_PARAM(conn_params->interval_min, BLE_CONN_INT_MIN_HOST_CHECK, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(conn_params->interval_max, BLE_CONN_INT_MIN_HOST_CHECK, ESP_BLE_CONN_INT_MAX) &&
ESP_BLE_IS_VALID_PARAM(conn_params->supervision_timeout, ESP_BLE_CONN_SUP_TOUT_MIN, ESP_BLE_CONN_SUP_TOUT_MAX) &&
(conn_params->latency <= ESP_BLE_CONN_LATENCY_MAX) &&
((conn_params->supervision_timeout * 10) >= ((1 + conn_params->latency) * ((conn_params->interval_max * 5) >> 1))) &&
components/bt/host/bluedroid/api/include/api/esp_bt_defs.h
+9 -4
View File
@@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2015-2025 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2015-2026 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@@ -9,6 +9,7 @@
#include <stdint.h>
#include <stdbool.h>
#include "sdkconfig.h"
#ifdef __cplusplus
extern "C" {
@@ -215,7 +216,11 @@ typedef uint8_t esp_link_key[ESP_BT_OCTET16_LEN]; /* Link Key */
#define ESP_BLE_PRIM_ADV_INT_MIN 0x000020 /*!< Minimum advertising interval for undirected and low duty cycle directed advertising */
#endif
#define ESP_BLE_PRIM_ADV_INT_MAX 0xFFFFFF /*!< Maximum advertising interval for undirected and low duty cycle directed advertising */
#define ESP_BLE_CONN_INT_MIN 0x0006 /*!< relate to BTM_BLE_CONN_INT_MIN in stack/btm_ble_api.h */
/* Public API constant pinned to the Bluetooth Core Spec minimum (7.5 ms).
* Applications that want a sub-spec connection interval must pass the
* desired value as an integer literal; whether it is actually accepted
* depends on the controller. */
#define ESP_BLE_CONN_INT_MIN 0x0006 /*!< Minimum connection interval, 7.5 ms (BLE Core Spec minimum) */
#define ESP_BLE_CONN_INT_MAX 0x0C80 /*!< relate to BTM_BLE_CONN_INT_MAX in stack/btm_ble_api.h */
#define ESP_BLE_CONN_LATENCY_MAX 499 /*!< relate to ESP_BLE_CONN_LATENCY_MAX in stack/btm_ble_api.h */
#define ESP_BLE_CONN_SUP_TOUT_MIN 0x000A /*!< relate to BTM_BLE_CONN_SUP_TOUT_MIN in stack/btm_ble_api.h */
@@ -232,8 +237,8 @@ typedef uint8_t esp_ble_phy_mask_t;
typedef struct {
uint16_t scan_interval; /*!< Initial scan interval, in units of 0.625ms, the range is 0x0004(2.5ms) to 0xFFFF(10.24s). */
uint16_t scan_window; /*!< Initial scan window, in units of 0.625ms, the range is 0x0004(2.5ms) to 0xFFFF(10.24s). */
uint16_t interval_min; /*!< Minimum connection interval, in units of 1.25ms, the range is 0x0006(7.5ms) to 0x0C80(4s). */
uint16_t interval_max; /*!< Maximum connection interval, in units of 1.25ms, the range is 0x0006(7.5ms) to 0x0C80(4s). */
uint16_t interval_min; /*!< Minimum connection interval, in units of 1.25 ms, the range is 0x0006(7.5ms) to 0x0C80(4s). Sub-spec values are accepted only if the controller supports them. */
uint16_t interval_max; /*!< Maximum connection interval, in units of 1.25 ms, the range is 0x0006(7.5ms) to 0x0C80(4s). Same bounds as interval_min. */
uint16_t latency; /*!< Connection latency, the range is 0x0000(0) to 0x01F3(499). */
uint16_t supervision_timeout; /*!< Connection supervision timeout, in units of 10ms, the range is from 0x000A(100ms) to 0x0C80(32s). */
uint16_t min_ce_len; /*!< Minimum connection event length, in units of 0.625ms, setting to 0 for no preferred parameters. */
components/bt/host/bluedroid/btc/profile/std/gap/btc_gap_ble.c
+1 -1
View File
@@ -1958,7 +1958,7 @@ static void btc_ble_update_conn_params(BD_ADDR bd_addr, uint16_t min_int,
min_int = max_int;
}
if (min_int < BTM_BLE_CONN_INT_MIN || max_int > BTM_BLE_CONN_INT_MAX) {
if (min_int < BLE_CONN_INT_MIN_HOST_CHECK || max_int > BTM_BLE_CONN_INT_MAX) {
BTC_TRACE_ERROR("Invalid interval value.\n");
}
components/bt/host/bluedroid/common/include/common/bluedroid_user_config.h
+12
View File
@@ -355,6 +355,18 @@
#define UC_BT_BLE_HIGH_DUTY_ADV_INTERVAL FALSE
#endif
/* When set to 1, the Bluedroid host's parameter validation no longer enforces
* a minimum BLE connection interval; the actual lower limit is then left to
* the controller. See BLE_CONN_INT_MIN_HOST_CHECK in common/bt_target.h.
*
* Do not turn this on manually in menuconfig unless you know the implications.
* In normal IDF builds it follows the active Controller integration. */
#ifdef CONFIG_BT_BLE_HOST_ALLOW_SUB_SPEC_MIN_CONN_INT
#define UC_BT_BLE_HOST_ALLOW_SUB_SPEC_MIN_CONN_INT 1
#else
#define UC_BT_BLE_HOST_ALLOW_SUB_SPEC_MIN_CONN_INT 0
#endif
//GATTS
#ifdef CONFIG_BT_GATTS_ENABLE
#define UC_BT_GATTS_ENABLE CONFIG_BT_GATTS_ENABLE
components/bt/host/bluedroid/common/include/common/bt_target.h
+18
View File
@@ -422,6 +422,24 @@
#define BLE_HIGH_DUTY_ADV_INTERVAL FALSE
#endif
/* Host-side parameter validation floor (in 1.25 ms units) for the BLE
* connection interval. Internal to the Bluedroid host: not sent on air, not
* exposed via the GATT Preferred Connection Parameters Characteristic, and
* not a public API constant - those use BTM_BLE_CONN_INT_MIN (0x0006).
*
* When UC_BT_BLE_HOST_ALLOW_SUB_SPEC_MIN_CONN_INT == 1 the host stops
* enforcing a minimum (the actual lower limit is then defined entirely by
* the controller). 0x0001 is used rather than 0x0000 so the existing
* `uint16_t < MIN` range checks remain well-defined under GCC
* `-Wtype-limits`. */
#ifndef BLE_CONN_INT_MIN_HOST_CHECK
#if (UC_BT_BLE_HOST_ALLOW_SUB_SPEC_MIN_CONN_INT == 1)
#define BLE_CONN_INT_MIN_HOST_CHECK 0x0001
#else
#define BLE_CONN_INT_MIN_HOST_CHECK 0x0006
#endif
#endif
#if (UC_BT_BLE_RPA_SUPPORTED == TRUE)
#define CONTROLLER_RPA_LIST_ENABLE TRUE
#else
components/bt/host/bluedroid/stack/btm/btm_ble.c
+2 -2
View File
@@ -578,8 +578,8 @@ void BTM_BleSetPrefConnParams (BD_ADDR bd_addr,
tout: %u",
min_conn_int, max_conn_int, slave_latency, supervision_tout);
if (BTM_BLE_ISVALID_PARAM(min_conn_int, BTM_BLE_CONN_INT_MIN, BTM_BLE_CONN_INT_MAX) &&
BTM_BLE_ISVALID_PARAM(max_conn_int, BTM_BLE_CONN_INT_MIN, BTM_BLE_CONN_INT_MAX) &&
if (BTM_BLE_ISVALID_PARAM(min_conn_int, BLE_CONN_INT_MIN_HOST_CHECK, BTM_BLE_CONN_INT_MAX) &&
BTM_BLE_ISVALID_PARAM(max_conn_int, BLE_CONN_INT_MIN_HOST_CHECK, BTM_BLE_CONN_INT_MAX) &&
BTM_BLE_ISVALID_PARAM(supervision_tout, BTM_BLE_CONN_SUP_TOUT_MIN, BTM_BLE_CONN_SUP_TOUT_MAX) &&
(slave_latency <= BTM_BLE_CONN_LATENCY_MAX || slave_latency == BTM_BLE_CONN_PARAM_UNDEF)) {
if (p_dev_rec) {
components/bt/host/bluedroid/stack/include/stack/btm_ble_api.h
+5
View File
@@ -122,6 +122,11 @@ typedef UINT8 tBTM_BLE_SFP;
#define BTM_BLE_SCAN_INT_MAX 0x4000
#define BTM_BLE_SCAN_WIN_MIN 0x0004
#define BTM_BLE_SCAN_WIN_MAX 0x4000
/* Bluetooth Core Spec minimum BLE connection interval (7.5 ms). Used inside
* the host stack wherever the on-air or interoperability semantics require
* the spec value. For host-side parameter validation (which can be relaxed
* to accept sub-spec intervals) use BLE_CONN_INT_MIN_HOST_CHECK from
* common/bt_target.h instead. */
#define BTM_BLE_CONN_INT_MIN 0x0006
#define BTM_BLE_CONN_INT_MAX 0x0C80
#define BTM_BLE_CONN_LATENCY_MAX 499
components/bt/host/bluedroid/stack/l2cap/l2c_ble.c
+4 -4
View File
@@ -377,9 +377,9 @@ void l2cble_scanner_conn_comp (UINT16 handle, BD_ADDR bda, tBLE_ADDR_TYPE type,
p_lcb->ble_addr_type = type;
/* If there are any preferred connection parameters, set them now */
if ( (p_dev_rec->conn_params.min_conn_int >= BTM_BLE_CONN_INT_MIN ) &&
if ( (p_dev_rec->conn_params.min_conn_int >= BLE_CONN_INT_MIN_HOST_CHECK ) &&
(p_dev_rec->conn_params.min_conn_int <= BTM_BLE_CONN_INT_MAX ) &&
(p_dev_rec->conn_params.max_conn_int >= BTM_BLE_CONN_INT_MIN ) &&
(p_dev_rec->conn_params.max_conn_int >= BLE_CONN_INT_MIN_HOST_CHECK ) &&
(p_dev_rec->conn_params.max_conn_int <= BTM_BLE_CONN_INT_MAX ) &&
(p_dev_rec->conn_params.slave_latency <= BTM_BLE_CONN_LATENCY_MAX ) &&
(p_dev_rec->conn_params.supervision_tout >= BTM_BLE_CONN_SUP_TOUT_MIN) &&
@@ -762,8 +762,8 @@ void l2cble_process_sig_cmd (tL2C_LCB *p_lcb, UINT8 *p, UINT16 pkt_len)
STREAM_TO_UINT16 (timeout, p); /* 0x000A - 0x0C80 */
/* If we are a master, the slave wants to update the parameters */
if (p_lcb->link_role == HCI_ROLE_MASTER) {
if (min_interval < BTM_BLE_CONN_INT_MIN || min_interval > BTM_BLE_CONN_INT_MAX ||
max_interval < BTM_BLE_CONN_INT_MIN || max_interval > BTM_BLE_CONN_INT_MAX ||
if (min_interval < BLE_CONN_INT_MIN_HOST_CHECK || min_interval > BTM_BLE_CONN_INT_MAX ||
max_interval < BLE_CONN_INT_MIN_HOST_CHECK || max_interval > BTM_BLE_CONN_INT_MAX ||
latency > BTM_BLE_CONN_LATENCY_MAX ||
timeout < BTM_BLE_CONN_SUP_TOUT_MIN || timeout > BTM_BLE_CONN_SUP_TOUT_MAX ||
/* The supervision_timeout parameter defines the link supervision timeout for the connection.
components/esp_rom/esp32c3/ld/esp32c3.rom.eco7_bt_funcs.ld
+5 -5
View File
@@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2023-2026 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@@ -21,10 +21,7 @@ r_llc_rem_encrypt_proc_continue_eco = 0x40001cf0;
r_lld_ext_adv_dynamic_aux_pti_process_eco = 0x40001cfc;
r_lld_adv_start_eco = 0x40001d04;
r_lld_con_evt_canceled_cbk_eco = 0x40001d08;
r_lld_con_evt_time_update_eco = 0x40001d0c;
r_lld_con_start_eco = 0x40001d10;
r_lld_con_frm_isr_eco = 0x40001d14;
r_lld_con_tx_eco = 0x40001d18;
r_lld_ext_scan_dynamic_pti_process_eco = 0x40001d28;
r_lld_scan_frm_eof_isr_eco = 0x40001d2c;
r_lld_sync_start_eco = 0x40001d30;
@@ -110,7 +107,6 @@ r_lld_adv_frm_isr_eco = 0x40001d00;
r_lld_res_list_clear = 0x40004638;
r_lld_res_list_rem = 0x40004680;
r_lld_adv_start_hook = 0x40001c80;
r_lld_con_evt_start_cbk_eco = 0x40001d1c;
r_lld_con_tx_prog_new_packet = 0x40001b74;
r_lld_adv_ext_chain_none_construct = 0x40001b50;
r_llc_llcp_send_eco = 0x40001cf4;
@@ -127,4 +123,8 @@ r_lld_scan_process_pkt_rx_adv_rep = 0x40001284;
r_register_esp_vendor_cmd_handler = 0x40001400;
r_llc_llcp_pdu_handler_get_overwrite = 0x40001d5c;
r_llc_start_eco = 0x40001cf8;
r_lld_con_tx_eco = 0x40001d18;
r_lld_con_evt_time_update_eco = 0x40001d0c;
r_lld_con_evt_start_cbk_eco = 0x40001d1c;
r_lld_con_frm_isr_eco = 0x40001d14;
*/