Merge branch 'refactor/bitscrambler_in_esp_hal_dma_v6.0' into 'release/v6.0'

refactor(hal): bitscrambler hal -> esp_hal_dma, usj hal -> esp_hal_usb (v6.0)

See merge request espressif/esp-idf!43700

components/esp_driver_bitscrambler/CMakeLists.txt

@@ -10,6 +10,7 @@ if(CONFIG_SOC_BITSCRAMBLER_SUPPORTED)
 endif()
 
 idf_component_register(SRCS ${srcs}
+                       REQUIRES "esp_hal_dma"
                        PRIV_REQUIRES "esp_mm"
                        INCLUDE_DIRS "include"
                        LDFRAGMENTS "linker.lf")

components/esp_driver_bitscrambler/include/driver/bitscrambler.h

@@ -9,9 +9,6 @@
 #include "esp_err.h"
 #include "soc/soc_caps.h"
 #include "hal/bitscrambler_types.h"
-#if SOC_BITSCRAMBLER_SUPPORTED
-#include "soc/bitscrambler_peri_select.h"
-#endif
 
 #ifdef __cplusplus
 extern "C" {

components/esp_driver_bitscrambler/src/bitscrambler_esp32c5.c

@@ -3,11 +3,10 @@
  *
  * SPDX-License-Identifier: Apache-2.0
  */
-#include "soc/gdma_channel.h"
+#include "hal/gdma_channel.h"
 #include "bitscrambler_soc_specific.h"
 
-// Note: these are indexed by the values of the SOC_BITSCRAMBLER_ATTACH_ defines
+// Note: these are indexed by the values of the SOC_BITSCRAMBLER_ATTACH_ defines in bitscrambler_peri_select.h
-// in soc/bitscrambler_peri_select.h
 // This map is used by the bitscrambler loopback driver only.
 
 const bitscrambler_periph_desc_t g_bitscrambler_periph_desc[] = {

components/esp_driver_bitscrambler/src/bitscrambler_esp32p4.c

@@ -3,11 +3,10 @@
  *
  * SPDX-License-Identifier: Apache-2.0
  */
-#include "soc/gdma_channel.h"
+#include "hal/gdma_channel.h"
 #include "bitscrambler_soc_specific.h"
 
-// Note: these are indexed by the values of the SOC_BITSCRAMBLER_ATTACH_ defines
+// Note: these are indexed by the values of the SOC_BITSCRAMBLER_ATTACH_ defines in bitscrambler_peri_select.h
-// in soc/bitscrambler_peri_select.h
 // This map is used by the bitscrambler loopback driver only.
 
 const bitscrambler_periph_desc_t g_bitscrambler_periph_desc[] = {

components/esp_driver_bitscrambler/src/bitscrambler_soc_specific.h

@@ -6,7 +6,7 @@
 #pragma once
 
 #include "esp_private/gdma.h"
-#include "soc/bitscrambler_peri_select.h"
+#include "hal/bitscrambler_peri_select.h"
 
 #ifdef __cplusplus
 extern "C" {

components/esp_driver_bitscrambler/test_apps/.build-test-rules.yml

@@ -3,3 +3,4 @@ components/esp_driver_bitscrambler/test_apps/bitscrambler:
     - if: SOC_BITSCRAMBLER_SUPPORTED != 1
   depends_components:
     - esp_driver_bitscrambler
+    - esp_hal_dma

components/esp_driver_parlio/src/parlio_priv.h

@@ -27,7 +27,6 @@
 #include "freertos/queue.h"
 #include "freertos/idf_additions.h"
 #include "soc/soc_caps.h"
-#include "soc/gdma_channel.h"
 #include "soc/parlio_periph.h"
 #include "hal/parlio_types.h"
 #include "hal/parlio_hal.h"

components/esp_driver_rmt/src/rmt_private.h

@@ -26,7 +26,6 @@
 #include "esp_check.h"
 #include "esp_err.h"
 #include "soc/soc_caps.h"
-#include "soc/gdma_channel.h"
 #include "soc/rmt_periph.h"
 #include "hal/rmt_types.h"
 #include "hal/rmt_hal.h"

components/esp_driver_usb_serial_jtag/CMakeLists.txt

@@ -12,7 +12,7 @@ endif()
 if(${target} STREQUAL "linux")
     set(priv_requires esp_ringbuf esp_timer)
 else()
-    set(priv_requires esp_driver_gpio esp_ringbuf esp_pm esp_timer)
+    set(priv_requires esp_driver_gpio esp_ringbuf esp_pm esp_timer esp_hal_usb)
 endif()
 
 idf_component_register(SRCS ${srcs}

components/esp_driver_usb_serial_jtag/test_apps/.build-test-rules.yml

@@ -14,6 +14,7 @@ components/esp_driver_usb_serial_jtag/test_apps/usb_serial_jtag:
     - vfs
     - esp_driver_gpio
     - esp_driver_usb_serial_jtag
+    - esp_hal_usb
 
 components/esp_driver_usb_serial_jtag/test_apps/usb_serial_jtag_vfs:
   disable:
@@ -28,3 +29,4 @@ components/esp_driver_usb_serial_jtag/test_apps/usb_serial_jtag_vfs:
   depends_components:
     - vfs
     - esp_driver_usb_serial_jtag
+    - esp_hal_usb

components/esp_hal_dma/esp32c5/include/hal/bitscrambler_ll.h

@@ -4,7 +4,6 @@
  * SPDX-License-Identifier: Apache-2.0
  */
 
-
 #pragma once
 
 #include <limits.h>
@@ -29,7 +28,7 @@ extern "C" {
  *
  * @param hw BitScrambler hardware instance address.
  * @param dir Direction, BITSCRAMBLER_DIR_TX or BITSCRAMBLER_DIR_RX
- * @param peri Peripheral to select, should pick the value from soc/bitscrambler_peri_select.h
+ * @param peri Peripheral to select, should pick the value from bitscrambler_peri_select.h
  */
 static inline void bitscrambler_ll_select_peripheral(bitscrambler_dev_t *hw, bitscrambler_direction_t dir, int peri)
 {
@@ -62,7 +61,6 @@ static inline void bitscrambler_ll_disable(bitscrambler_dev_t *hw, bitscrambler_
     hw->ctrl[dir].ena = 0;
 }
 
-
 /**
  * @brief Write a word to the instruction memory
  *

components/esp_hal_dma/esp32p4/include/hal/bitscrambler_ll.h

@@ -4,7 +4,6 @@
  * SPDX-License-Identifier: Apache-2.0
  */
 
-
 #pragma once
 
 #include <limits.h>
@@ -29,7 +28,7 @@ extern "C" {
  *
  * @param hw BitScrambler hardware instance address.
  * @param dir Direction, BITSCRAMBLER_DIR_TX or BITSCRAMBLER_DIR_RX
- * @param peri Peripheral to select, should pick the value from soc/bitscrambler_peri_select.h
+ * @param peri Peripheral to select, should pick the value from bitscrambler_peri_select.h
  */
 static inline void bitscrambler_ll_select_peripheral(bitscrambler_dev_t *hw, bitscrambler_direction_t dir, int peri)
 {
@@ -62,7 +61,6 @@ static inline void bitscrambler_ll_disable(bitscrambler_dev_t *hw, bitscrambler_
     hw->ctrl[dir].ena = 0;
 }
 
-
 /**
  * @brief Write a word to the instruction memory
  *

components/esp_hal_dma/include/hal/bitscrambler_types.h

@@ -6,6 +6,10 @@
 
 #pragma once
 
+#if __has_include("hal/bitscrambler_peri_select.h")
+#include "hal/bitscrambler_peri_select.h"
+#endif
+
 #ifdef __cplusplus
 extern "C" {
 #endif
@@ -27,7 +31,6 @@ typedef enum {
     BITSCRAMBLER_LUT_WIDTH_32BIT = 2, /*!< 32-bit LUT */
 } bitscrambler_lut_width_t;
 
-
 /**
  * @brief EOF signal generating mode of bitscrambler
  */

components/esp_hal_usb/CMakeLists.txt

@@ -7,10 +7,13 @@ endif()
 set(includes "include")
 set(srcs)
 
+if(EXISTS "${CMAKE_CURRENT_LIST_DIR}/${target}/include")
+    list(APPEND includes "${target}/include")
+endif()
+
 # USB-DWC related source files and USB FSLS PHY wrapper
 if(CONFIG_SOC_USB_OTG_SUPPORTED)
     list(APPEND srcs "usb_dwc_hal.c" "usb_wrap_hal.c" "${target}/usb_dwc_periph.c")
-    list(APPEND includes "${target}/include")
 endif()
 
 # USB UTMI PHY
@@ -18,6 +21,11 @@ if(CONFIG_SOC_USB_UTMI_PHY_NUM GREATER 0)
     list(APPEND srcs "usb_utmi_hal.c")
 endif()
 
+# USB Serial JTAG
+if(CONFIG_SOC_USB_SERIAL_JTAG_SUPPORTED)
+    list(APPEND srcs "usb_serial_jtag_hal.c")
+endif()
+
 idf_component_register(SRCS ${srcs}
                     INCLUDE_DIRS ${includes}
                     REQUIRES soc hal)

components/esp_hal_usb/README.md

@@ -19,18 +19,16 @@ The USB HAL is structured in two main sub-layers:
 
 This HAL supports various USB controller and PHY types depending on the ESP chip:
 
-- **USB-DWC (DesignWare USB Controller)**: The main USB OTG controller available on:
+- **USB-DWC (DesignWare USB Controller)**: The main USB OTG controller supporting USB Host and Device modes
-  - ESP32-S2
+
-  - ESP32-S3
+- **USB Serial JTAG**: A special USB peripheral that combines USB CDC-ACM functionality with JTAG debugging capabilities
-  - ESP32-H4
-  - ESP32-P4
 
 - **USB WRAP**: A wrapper/peripheral controller that provides additional USB functionality and GPIO matrix integration
 
 - **USB PHY Types**:
   - **FSLS (Full Speed/Low Speed) Internal PHY**: Built-in PHY supporting USB Full Speed and Low Speed operation
   - **FSLS External PHY**: Support for external FSLS PHY via GPIO matrix
-  - **UTMI PHY**: UTMI+ compliant PHY interface (available on ESP32-P4)
+  - **UTMI PHY**: UTMI+ compliant PHY interface for High Speed USB support
 
 ## Features
 

components/esp_hal_usb/esp32c3/include/hal/usb_serial_jtag_ll.h

@@ -31,7 +31,6 @@ typedef enum {
     USB_SERIAL_JTAG_INTR_EP1_ZERO_PAYLOAD       = (1 << 10),
 } usb_serial_jtag_ll_intr_t;
 
-
 #ifdef __cplusplus
 extern "C" {
 #endif
@@ -116,7 +115,9 @@ static inline int usb_serial_jtag_ll_read_rxfifo(uint8_t *buf, uint32_t rd_len)
 {
     int i;
     for (i = 0; i < (int)rd_len; i++) {
-        if (!USB_SERIAL_JTAG.ep1_conf.serial_out_ep_data_avail) break;
+        if (!USB_SERIAL_JTAG.ep1_conf.serial_out_ep_data_avail) {
+            break;
+        }
         buf[i] = USB_SERIAL_JTAG.ep1.rdwr_byte;
     }
     return i;
@@ -135,7 +136,9 @@ static inline int usb_serial_jtag_ll_write_txfifo(const uint8_t *buf, uint32_t w
 {
     int i;
     for (i = 0; i < (int)wr_len; i++) {
-        if (!USB_SERIAL_JTAG.ep1_conf.serial_in_ep_data_free) break;
+        if (!USB_SERIAL_JTAG.ep1_conf.serial_in_ep_data_free) {
+            break;
+        }
         USB_SERIAL_JTAG.ep1.rdwr_byte = buf[i];
     }
     return i;
@@ -178,7 +181,7 @@ static inline int usb_serial_jtag_ll_txfifo_writable(void)
  */
 static inline void usb_serial_jtag_ll_txfifo_flush(void)
 {
-    USB_SERIAL_JTAG.ep1_conf.wr_done=1;
+    USB_SERIAL_JTAG.ep1_conf.wr_done = 1;
 }
 
 /* ---------------------------- USB PHY Control  ---------------------------- */
@@ -335,7 +338,6 @@ FORCE_INLINE_ATTR bool usb_serial_jtag_ll_module_is_enabled(void)
     usb_serial_jtag_ll_module_is_enabled(__VA_ARGS__);  \
 })
 
-
 #ifdef __cplusplus
 }
 #endif

components/esp_hal_usb/esp32c5/include/hal/usb_serial_jtag_ll.h

@@ -115,7 +115,9 @@ static inline int usb_serial_jtag_ll_read_rxfifo(uint8_t *buf, uint32_t rd_len)
 {
     int i;
     for (i = 0; i < (int)rd_len; i++) {
-        if (!USB_SERIAL_JTAG.ep1_conf.serial_out_ep_data_avail) break;
+        if (!USB_SERIAL_JTAG.ep1_conf.serial_out_ep_data_avail) {
+            break;
+        }
         buf[i] = USB_SERIAL_JTAG.ep1.val;
     }
     return i;
@@ -134,7 +136,9 @@ static inline int usb_serial_jtag_ll_write_txfifo(const uint8_t *buf, uint32_t w
 {
     int i;
     for (i = 0; i < (int)wr_len; i++) {
-        if (!USB_SERIAL_JTAG.ep1_conf.serial_in_ep_data_free) break;
+        if (!USB_SERIAL_JTAG.ep1_conf.serial_in_ep_data_free) {
+            break;
+        }
         USB_SERIAL_JTAG.ep1.val = buf[i];
     }
     return i;
@@ -177,7 +181,7 @@ static inline int usb_serial_jtag_ll_txfifo_writable(void)
  */
 static inline void usb_serial_jtag_ll_txfifo_flush(void)
 {
-    USB_SERIAL_JTAG.ep1_conf.wr_done=1;
+    USB_SERIAL_JTAG.ep1_conf.wr_done = 1;
 }
 
 /**

components/esp_hal_usb/esp32c6/include/hal/usb_serial_jtag_ll.h

@@ -31,7 +31,6 @@ typedef enum {
     USB_SERIAL_JTAG_INTR_EP1_ZERO_PAYLOAD       = (1 << 10),
 } usb_serial_jtag_ll_intr_t;
 
-
 #ifdef __cplusplus
 extern "C" {
 #endif
@@ -116,7 +115,9 @@ static inline int usb_serial_jtag_ll_read_rxfifo(uint8_t *buf, uint32_t rd_len)
 {
     int i;
     for (i = 0; i < (int)rd_len; i++) {
-        if (!USB_SERIAL_JTAG.ep1_conf.serial_out_ep_data_avail) break;
+        if (!USB_SERIAL_JTAG.ep1_conf.serial_out_ep_data_avail) {
+            break;
+        }
         buf[i] = USB_SERIAL_JTAG.ep1.rdwr_byte;
     }
     return i;
@@ -135,7 +136,9 @@ static inline int usb_serial_jtag_ll_write_txfifo(const uint8_t *buf, uint32_t w
 {
     int i;
     for (i = 0; i < (int)wr_len; i++) {
-        if (!USB_SERIAL_JTAG.ep1_conf.serial_in_ep_data_free) break;
+        if (!USB_SERIAL_JTAG.ep1_conf.serial_in_ep_data_free) {
+            break;
+        }
         USB_SERIAL_JTAG.ep1.rdwr_byte = buf[i];
     }
     return i;
@@ -178,7 +181,7 @@ static inline int usb_serial_jtag_ll_txfifo_writable(void)
  */
 static inline void usb_serial_jtag_ll_txfifo_flush(void)
 {
-    USB_SERIAL_JTAG.ep1_conf.wr_done=1;
+    USB_SERIAL_JTAG.ep1_conf.wr_done = 1;
 }
 
 /**

components/esp_hal_usb/esp32c61/include/hal/usb_serial_jtag_ll.h

@@ -115,7 +115,9 @@ static inline int usb_serial_jtag_ll_read_rxfifo(uint8_t *buf, uint32_t rd_len)
 {
     int i;
     for (i = 0; i < (int)rd_len; i++) {
-        if (!USB_SERIAL_JTAG.ep1_conf.serial_out_ep_data_avail) break;
+        if (!USB_SERIAL_JTAG.ep1_conf.serial_out_ep_data_avail) {
+            break;
+        }
         buf[i] = USB_SERIAL_JTAG.ep1.val;
     }
     return i;
@@ -134,7 +136,9 @@ static inline int usb_serial_jtag_ll_write_txfifo(const uint8_t *buf, uint32_t w
 {
     int i;
     for (i = 0; i < (int)wr_len; i++) {
-        if (!USB_SERIAL_JTAG.ep1_conf.serial_in_ep_data_free) break;
+        if (!USB_SERIAL_JTAG.ep1_conf.serial_in_ep_data_free) {
+            break;
+        }
         USB_SERIAL_JTAG.ep1.val = buf[i];
     }
     return i;
@@ -177,7 +181,7 @@ static inline int usb_serial_jtag_ll_txfifo_writable(void)
  */
 static inline void usb_serial_jtag_ll_txfifo_flush(void)
 {
-    USB_SERIAL_JTAG.ep1_conf.wr_done=1;
+    USB_SERIAL_JTAG.ep1_conf.wr_done = 1;
 }
 
 /**

components/esp_hal_usb/esp32h2/include/hal/usb_serial_jtag_ll.h

@@ -31,7 +31,6 @@ typedef enum {
     USB_SERIAL_JTAG_INTR_EP1_ZERO_PAYLOAD       = (1 << 10),
 } usb_serial_jtag_ll_intr_t;
 
-
 #ifdef __cplusplus
 extern "C" {
 #endif
@@ -116,7 +115,9 @@ static inline int usb_serial_jtag_ll_read_rxfifo(uint8_t *buf, uint32_t rd_len)
 {
     int i;
     for (i = 0; i < (int)rd_len; i++) {
-        if (!USB_SERIAL_JTAG.ep1_conf.serial_out_ep_data_avail) break;
+        if (!USB_SERIAL_JTAG.ep1_conf.serial_out_ep_data_avail) {
+            break;
+        }
         buf[i] = USB_SERIAL_JTAG.ep1.rdwr_byte;
     }
     return i;
@@ -135,7 +136,9 @@ static inline int usb_serial_jtag_ll_write_txfifo(const uint8_t *buf, uint32_t w
 {
     int i;
     for (i = 0; i < (int)wr_len; i++) {
-        if (!USB_SERIAL_JTAG.ep1_conf.serial_in_ep_data_free) break;
+        if (!USB_SERIAL_JTAG.ep1_conf.serial_in_ep_data_free) {
+            break;
+        }
         USB_SERIAL_JTAG.ep1.rdwr_byte = buf[i];
     }
     return i;
@@ -178,7 +181,7 @@ static inline int usb_serial_jtag_ll_txfifo_writable(void)
  */
 static inline void usb_serial_jtag_ll_txfifo_flush(void)
 {
-    USB_SERIAL_JTAG.ep1_conf.wr_done=1;
+    USB_SERIAL_JTAG.ep1_conf.wr_done = 1;
 }
 
 /**

components/esp_hal_usb/esp32h21/include/hal/usb_serial_jtag_ll.h

@@ -31,7 +31,6 @@ typedef enum {
     USB_SERIAL_JTAG_INTR_EP1_ZERO_PAYLOAD       = (1 << 10),
 } usb_serial_jtag_ll_intr_t;
 
-
 #ifdef __cplusplus
 extern "C" {
 #endif
@@ -116,7 +115,9 @@ static inline int usb_serial_jtag_ll_read_rxfifo(uint8_t *buf, uint32_t rd_len)
 {
     int i;
     for (i = 0; i < (int)rd_len; i++) {
-        if (!USB_SERIAL_JTAG.serial_jtag_ep1_conf.serial_jtag_serial_out_ep_data_avail) break;
+        if (!USB_SERIAL_JTAG.serial_jtag_ep1_conf.serial_jtag_serial_out_ep_data_avail) {
+            break;
+        }
         buf[i] = USB_SERIAL_JTAG.serial_jtag_ep1.val;
     }
     return i;
@@ -135,7 +136,9 @@ static inline int usb_serial_jtag_ll_write_txfifo(const uint8_t *buf, uint32_t w
 {
     int i;
     for (i = 0; i < (int)wr_len; i++) {
-        if (!USB_SERIAL_JTAG.serial_jtag_ep1_conf.serial_jtag_serial_in_ep_data_free) break;
+        if (!USB_SERIAL_JTAG.serial_jtag_ep1_conf.serial_jtag_serial_in_ep_data_free) {
+            break;
+        }
         USB_SERIAL_JTAG.serial_jtag_ep1.val = buf[i];
     }
     return i;
@@ -178,7 +181,7 @@ static inline int usb_serial_jtag_ll_txfifo_writable(void)
 */
 static inline void usb_serial_jtag_ll_txfifo_flush(void)
 {
-    USB_SERIAL_JTAG.serial_jtag_ep1_conf.serial_jtag_wr_done=1;
+    USB_SERIAL_JTAG.serial_jtag_ep1_conf.serial_jtag_wr_done = 1;
 }
 
 /**
@@ -328,8 +331,6 @@ FORCE_INLINE_ATTR bool usb_serial_jtag_ll_module_is_enabled(void)
     return (PCR.usb_device_conf.usb_device_clk_en && !PCR.usb_device_conf.usb_device_rst_en);
 }
 
-
-
 #ifdef __cplusplus
 }
 #endif

components/esp_hal_usb/esp32h4/include/hal/usb_serial_jtag_ll.h

@@ -31,7 +31,6 @@ typedef enum {
     USB_SERIAL_JTAG_INTR_EP1_ZERO_PAYLOAD       = (1 << 10),
 } usb_serial_jtag_ll_intr_t;
 
-
 #ifdef __cplusplus
 extern "C" {
 #endif
@@ -116,7 +115,9 @@ static inline int usb_serial_jtag_ll_read_rxfifo(uint8_t *buf, uint32_t rd_len)
 {
     int i;
     for (i = 0; i < (int)rd_len; i++) {
-        if (!USB_SERIAL_JTAG.serial_jtag_ep1_conf.serial_jtag_serial_out_ep_data_avail) break;
+        if (!USB_SERIAL_JTAG.serial_jtag_ep1_conf.serial_jtag_serial_out_ep_data_avail) {
+            break;
+        }
         buf[i] = USB_SERIAL_JTAG.serial_jtag_ep1.val;
     }
     return i;
@@ -135,7 +136,9 @@ static inline int usb_serial_jtag_ll_write_txfifo(const uint8_t *buf, uint32_t w
 {
     int i;
     for (i = 0; i < (int)wr_len; i++) {
-        if (!USB_SERIAL_JTAG.serial_jtag_ep1_conf.serial_jtag_serial_in_ep_data_free) break;
+        if (!USB_SERIAL_JTAG.serial_jtag_ep1_conf.serial_jtag_serial_in_ep_data_free) {
+            break;
+        }
         USB_SERIAL_JTAG.serial_jtag_ep1.val = buf[i];
     }
     return i;
@@ -178,7 +181,7 @@ static inline int usb_serial_jtag_ll_txfifo_writable(void)
  */
 static inline void usb_serial_jtag_ll_txfifo_flush(void)
 {
-    USB_SERIAL_JTAG.serial_jtag_ep1_conf.serial_jtag_wr_done=1;
+    USB_SERIAL_JTAG.serial_jtag_ep1_conf.serial_jtag_wr_done = 1;
 }
 
 /**
@@ -328,8 +331,6 @@ FORCE_INLINE_ATTR bool usb_serial_jtag_ll_module_is_enabled(void)
     return (PCR.usb_device_conf.usb_device_clk_en && !PCR.usb_device_conf.usb_device_rst_en);
 }
 
-
-
 #ifdef __cplusplus
 }
 #endif

components/esp_hal_usb/esp32p4/include/hal/usb_serial_jtag_ll.h

@@ -119,7 +119,9 @@ static inline int usb_serial_jtag_ll_read_rxfifo(uint8_t *buf, uint32_t rd_len)
 {
     int i;
     for (i = 0; i < (int)rd_len; i++) {
-        if (!USB_SERIAL_JTAG.ep1_conf.serial_out_ep_data_avail) break;
+        if (!USB_SERIAL_JTAG.ep1_conf.serial_out_ep_data_avail) {
+            break;
+        }
         buf[i] = HAL_FORCE_READ_U32_REG_FIELD(USB_SERIAL_JTAG.ep1, rdwr_byte);
     }
     return i;
@@ -138,7 +140,9 @@ static inline int usb_serial_jtag_ll_write_txfifo(const uint8_t *buf, uint32_t w
 {
     int i;
     for (i = 0; i < (int)wr_len; i++) {
-        if (!USB_SERIAL_JTAG.ep1_conf.serial_in_ep_data_free) break;
+        if (!USB_SERIAL_JTAG.ep1_conf.serial_in_ep_data_free) {
+            break;
+        }
         HAL_FORCE_MODIFY_U32_REG_FIELD(USB_SERIAL_JTAG.ep1, rdwr_byte, buf[i]);
     }
     return i;
@@ -181,7 +185,7 @@ static inline int usb_serial_jtag_ll_txfifo_writable(void)
  */
 static inline void usb_serial_jtag_ll_txfifo_flush(void)
 {
-    USB_SERIAL_JTAG.ep1_conf.wr_done=1;
+    USB_SERIAL_JTAG.ep1_conf.wr_done = 1;
 }
 
 /**

components/esp_hal_usb/esp32s3/include/hal/usb_serial_jtag_ll.h

@@ -33,7 +33,6 @@ typedef enum {
     USB_SERIAL_JTAG_INTR_EP1_ZERO_PAYLOAD       = (1 << 10),
 } usb_serial_jtag_intr_t;
 
-
 #ifdef __cplusplus
 extern "C" {
 #endif
@@ -118,7 +117,9 @@ static inline uint32_t usb_serial_jtag_ll_read_rxfifo(uint8_t *buf, uint32_t rd_
 {
     uint32_t i;
     for (i = 0; i < rd_len; i++) {
-        if (!USB_SERIAL_JTAG.ep1_conf.serial_out_ep_data_avail) break;
+        if (!USB_SERIAL_JTAG.ep1_conf.serial_out_ep_data_avail) {
+            break;
+        }
         buf[i] = USB_SERIAL_JTAG.ep1.rdwr_byte;
     }
     return i;
@@ -137,7 +138,9 @@ static inline uint32_t usb_serial_jtag_ll_write_txfifo(const uint8_t *buf, uint3
 {
     uint32_t i;
     for (i = 0; i < wr_len; i++) {
-        if (!USB_SERIAL_JTAG.ep1_conf.serial_in_ep_data_free) break;
+        if (!USB_SERIAL_JTAG.ep1_conf.serial_in_ep_data_free) {
+            break;
+        }
         USB_SERIAL_JTAG.ep1.rdwr_byte = buf[i];
     }
     return i;
@@ -180,7 +183,7 @@ static inline int usb_serial_jtag_ll_txfifo_writable(void)
  */
 static inline void usb_serial_jtag_ll_txfifo_flush(void)
 {
-    USB_SERIAL_JTAG.ep1_conf.wr_done=1;
+    USB_SERIAL_JTAG.ep1_conf.wr_done = 1;
 }
 
 /**

components/esp_hw_support/dma/include/esp_private/gdma.h

@@ -8,7 +8,6 @@
 
 #include <stdbool.h>
 #include "esp_etm.h"
-#include "soc/gdma_channel.h"
 #include "hal/gdma_types.h"
 #include "esp_err.h"
 
@@ -87,7 +86,7 @@ typedef struct {
  */
 typedef struct {
     gdma_trigger_peripheral_t periph; /*!< Target peripheral which will trigger DMA operations */
-    int instance_id;                  /*!< Peripheral instance ID. Supported IDs are listed in `soc/gdma_channel.h`, e.g. SOC_GDMA_TRIG_PERIPH_UHCI0 */
+    int instance_id;                  /*!< Peripheral instance ID. Supported IDs are listed in `hal/gdma_channel.h`, e.g. SOC_GDMA_TRIG_PERIPH_UHCI0 */
     int bus_id;                       /*!< Which system bus should the DMA attached to */
 } gdma_trigger_t;
 

components/hal/CMakeLists.txt

@@ -234,10 +234,6 @@ elseif(NOT BOOTLOADER_BUILD)
         list(APPEND srcs "ds_hal.c")
     endif()
 
-    if(CONFIG_SOC_USB_SERIAL_JTAG_SUPPORTED)
-        list(APPEND srcs "usb_serial_jtag_hal.c")
-    endif()
-
     if(CONFIG_SOC_TOUCH_SENSOR_SUPPORTED)
         # Source files for the legacy touch hal driver
         if(CONFIG_SOC_TOUCH_SENSOR_VERSION LESS 3)

components/hal/include/hal/bitscrambler_hal.h

@@ -1,15 +0,0 @@
-/*
- * SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-
-#pragma once
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#ifdef __cplusplus
-}
-#endif

components/hal/include/hal/gdma_types.h

@@ -1,11 +1,15 @@
 /*
- * SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2022-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
 
 #pragma once
 
+#if __has_include("hal/gdma_channel.h")
+#include "hal/gdma_channel.h"
+#endif
+
 #ifdef __cplusplus
 extern "C" {
 #endif

components/hal/include/hal/spi_hal.h

@@ -28,10 +28,6 @@
 #include "esp_err.h"
 #include "soc/soc_caps.h"
 #include "hal/spi_types.h"
-#include "hal/dma_types.h"
-#if SOC_GDMA_SUPPORTED
-#include "soc/gdma_channel.h"
-#endif
 #if SOC_GPSPI_SUPPORTED
 #include "hal/spi_ll.h"
 #endif
@@ -42,12 +38,6 @@ extern "C" {
 
 #if SOC_GPSPI_SUPPORTED
 
-#if SOC_GDMA_TRIG_PERIPH_SPI2_BUS == SOC_GDMA_BUS_AHB
-typedef dma_descriptor_align4_t spi_dma_desc_t;
-#else
-typedef dma_descriptor_align8_t spi_dma_desc_t;
-#endif
-
 /**
  * Input parameters to the ``spi_hal_cal_clock_conf`` to calculate the timing configuration
  */

components/hal/include/hal/spi_slave_hal.h

@@ -27,9 +27,7 @@
 #include "esp_types.h"
 #include "soc/soc_caps.h"
 #include "hal/dma_types.h"
-#if SOC_GDMA_SUPPORTED
+#include "hal/gdma_types.h"
-#include "soc/gdma_channel.h"
-#endif
 #if SOC_GPSPI_SUPPORTED
 #include "hal/spi_ll.h"
 #endif

components/hal/include/hal/spi_slave_hd_hal.h

@@ -46,11 +46,9 @@
 #include "esp_types.h"
 #include "esp_err.h"
 #include "soc/soc_caps.h"
-#if SOC_GDMA_SUPPORTED
-#include "soc/gdma_channel.h"
-#endif
 #include "hal/spi_types.h"
 #include "hal/dma_types.h"
+#include "hal/gdma_types.h"
 #if SOC_GPSPI_SUPPORTED
 #include "hal/spi_ll.h"
 #endif

components/hal/test_apps/tee/components/pms_and_cpu_intr/src/common/test_setup_utils.c

@@ -11,7 +11,7 @@
 #include "soc/soc_caps.h"
 
 #include "hal/gdma_ll.h"
-#include "soc/gdma_channel.h"
+#include "hal/gdma_types.h"
 #if SOC_AHB_GDMA_VERSION == 2
 #include "soc/ahb_dma_struct.h"
 #elif SOC_AHB_GDMA_VERSION == 1

components/mbedtls/esp_tee/esp_tee_crypto_shared_gdma.c

@@ -10,8 +10,6 @@
 #include "mbedtls/aes.h"
 #include "esp_crypto_dma.h"
 
-#include "hal/gdma_types.h"
-#include "soc/gdma_channel.h"
 #include "soc/soc_caps.h"
 
 #include "esp_tee_crypto_shared_gdma.h"

components/mbedtls/port/include/esp_crypto_dma.h

@@ -6,11 +6,11 @@
 
 #pragma once
 
-#include "hal/dma_types.h"
 #include "soc/soc_caps.h"
+#include "hal/dma_types.h"
+#include "hal/gdma_types.h"
 
 #if SOC_GDMA_SUPPORTED
-#include "soc/gdma_channel.h"
 #include "hal/gdma_ll.h"
 #endif /* SOC_GDMA_SUPPORTED */
 

components/soc/esp32/include/soc/gdma_channel.h

@@ -1,7 +0,0 @@
-/*
- * SPDX-FileCopyrightText: 2021 Espressif Systems (Shanghai) CO LTD
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-// ESP32 doesn't feature General DMA peripheral.
-// We keep this file here only for consistency's sake.

components/soc/esp32s2/include/soc/gdma_channel.h

@@ -1,7 +0,0 @@
-/*
- * SPDX-FileCopyrightText: 2021 Espressif Systems (Shanghai) CO LTD
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-// ESP32-S2 doesn't feature General DMA peripheral.
-// We keep this file here only for consistency's sake.

docs/doxygen/Doxyfile_esp32c5

@@ -1,7 +1,7 @@
 INPUT += \
         $(PROJECT_PATH)/components/esp_driver_bitscrambler/include/driver/bitscrambler.h \
         $(PROJECT_PATH)/components/esp_driver_bitscrambler/include/driver/bitscrambler_loopback.h \
-        $(PROJECT_PATH)/components/soc/$(IDF_TARGET)/include/soc/bitscrambler_peri_select.h \
+        $(PROJECT_PATH)/components/esp_hal_dma/esp32c5/include/hal/bitscrambler_peri_select.h \
         $(PROJECT_PATH)/components/ulp/lp_core/include/lp_core_i2c.h \
         $(PROJECT_PATH)/components/ulp/lp_core/include/lp_core_uart.h \
         $(PROJECT_PATH)/components/ulp/lp_core/include/lp_core_etm.h \

docs/doxygen/Doxyfile_esp32p4

@@ -33,6 +33,7 @@ INPUT += \
     $(PROJECT_PATH)/components/esp_driver_touch_sens/include/driver/touch_sens.h \
     $(PROJECT_PATH)/components/esp_driver_touch_sens/include/driver/touch_sens_types.h \
     $(PROJECT_PATH)/components/esp_hal_cam/include/hal/cam_ctlr_types.h \
+    $(PROJECT_PATH)/components/esp_hal_dma/esp32p4/include/hal/bitscrambler_peri_select.h \
     $(PROJECT_PATH)/components/esp_lcd/dsi/include/esp_lcd_mipi_dsi.h \
     $(PROJECT_PATH)/components/esp_lcd/rgb/include/esp_lcd_panel_rgb.h \
     $(PROJECT_PATH)/components/hal/include/hal/isp_types.h \
@@ -40,7 +41,6 @@ INPUT += \
     $(PROJECT_PATH)/components/hal/include/hal/ppa_types.h \
     $(PROJECT_PATH)/components/sdmmc/include/sd_pwr_ctrl.h \
     $(PROJECT_PATH)/components/sdmmc/include/sd_pwr_ctrl_by_on_chip_ldo.h \
-    $(PROJECT_PATH)/components/soc/$(IDF_TARGET)/include/soc/bitscrambler_peri_select.h \
     $(PROJECT_PATH)/components/ulp/lp_core/include/lp_core_etm.h \
     $(PROJECT_PATH)/components/ulp/lp_core/include/lp_core_i2c.h \
     $(PROJECT_PATH)/components/ulp/lp_core/include/lp_core_spi.h \

tools/ci/check_soc_headers_leak.py

@@ -19,7 +19,6 @@ allowed_soc_headers = (
     'soc/reg_base.h',
     'soc/clk_tree_defs.h',
     'soc/uart_channel.h',
-    'soc/bitscrambler_peri_select.h',
 )
 
 include_header_pattern = re.compile(r'[\s]*#[\s]*include ["<](.*)[">].*')
@@ -33,7 +32,7 @@ class PublicAPIVisits:
         self._idf_path = idf_path
 
     def __iter__(self) -> typing.Generator:
-        with open(self.doxyfile_path, 'r', encoding='utf8') as f:
+        with open(self.doxyfile_path, encoding='utf8') as f:
             for line in f:
                 line = line.strip()
                 if line.startswith('$(PROJECT_PATH)'):
@@ -48,10 +47,10 @@ def check_soc_not_in(
     idf_path: str,
     target: str,
     doxyfile_path: str,
-    violation_dict: typing.Dict[str, set],
+    violation_dict: dict[str, set],
 ) -> None:
     for file_path in PublicAPIVisits(os.path.join(idf_path, doxyfile_path), idf_path, target):
-        with open(file_path, 'r', encoding='utf8') as f:
+        with open(file_path, encoding='utf8') as f:
             for line in f:
                 match_data = re.match(include_header_pattern, line)
                 if match_data:
@@ -82,7 +81,7 @@ def main() -> None:
         print('No targets found', file=sys.stderr)
         sys.exit(1)
 
-    soc_violation_dict: typing.Dict[str, set] = {}
+    soc_violation_dict: dict[str, set] = {}
     for target in targets:
         check_soc_not_in(
             idf_path,