Mirrors/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2026-10-02 11:10:54 +03:00
Code Issues Packages Projects Releases Wiki Activity

esp32h4: remove esp32h4 target from peripherals

Browse Source
This commit is contained in:
laokaiyao
2023-04-20 15:19:45 +08:00
parent 2300982af9
commit b7053b46ef
242 changed files with 54 additions and 103861 deletions
Download Patch File Download Diff File Expand all files Collapse all files
examples/peripherals/i2c/i2c_self_test/README.md
+9 -9
View File
@@ -44,15 +44,15 @@ To run this example, you should have one ESP development board (e.g. ESP32-WROVE
**Note:** It is recommended to add external pull-up resistors for SDA/SCL pins to make the communication more stable, though the driver will enable internal pull-up resistors.
#### Pin Assignment(esp32s3):
#### Pin Assignment(esp32s3, esp32h2):
**Note:** The following pin assignments are used by default, you can change these in the `menuconfig` .
| | SDA | SCL |
| ------------------------- | ------ | ------ |
| ESP32-S3 I2C Master | GPIO1 | GPIO2 |
| ESP32-S3 I2C Slave | GPIO4 | GPIO5 |
| BH1750 Sensor | SDA | SCL |
| | SDA | SCL |
| ---------------------------------- | ------ | ------ |
| ESP32-S3/ESP32-H2 I2C Master | GPIO1 | GPIO2 |
| ESP32-S3/ESP32-H2 I2C Slave | GPIO4 | GPIO5 |
| BH1750 Sensor | SDA | SCL |
- slave:
- GPIO4 is assigned as the data signal of I2C slave port
@@ -68,13 +68,13 @@ To run this example, you should have one ESP development board (e.g. ESP32-WROVE
**Note:** It is recommended to add external pull-up resistors for SDA/SCL pins to make the communication more stable, though the driver will enable internal pull-up resistors.
#### Pin Assignment(esp32c3, esp32c2, esp32h4):
#### Pin Assignment(esp32c3, esp32c2):
**Note:** The following pin assignments are used by default, you can change these in the `menuconfig` .
| | SDA | SCL |
| ------------------------------------------- | ------ | ------ |
| ESP32-C3/ESP32-C2/ESP32-H4 I2C Master(Slave)| GPIO5 | GPIO6 |
| ESP32-C3/ESP32-C2 I2C Master(Slave) | GPIO5 | GPIO6 |
| BH1750 Sensor | SDA | SCL |
- master:
@@ -84,7 +84,7 @@ To run this example, you should have one ESP development board (e.g. ESP32-WROVE
- Connection:
- connect SDA/SCL of BH1750 sensor to GPIO5/GPIO6
**Note:** There is only one i2c device on ESP32-C3/ESP32-C2/ESP32-H4, so it is not possible to perform any ESP32/ESP32-S2 self-test example from this repo. However it is possible to test I2C with external devices. If you find anything wrong with your device, please try connecting external pull-up resistors.
**Note:** There is only one i2c device on ESP32-C3/ESP32-C2, so it is not possible to perform any ESP32/ESP32-S2 self-test example from this repo. However it is possible to test I2C with external devices. If you find anything wrong with your device, please try connecting external pull-up resistors.
### Configure the project