Merge branch 'bugfix/esp_idf_s3_deepsleep_dead_v5.3' into 'release/v5.3'

fix(hal): fix the issue of dual-core contention for RTC_CNTL regs(v5.3)

See merge request espressif/esp-idf!46183

components/soc/esp32/include/soc/Kconfig.soc_caps.in

@@ -619,6 +619,10 @@ config SOC_RTCIO_WAKE_SUPPORTED
     bool
     default y
 
+config SOC_RTC_CNTL_NEEDS_ATOMIC_ACCESS
+    bool
+    default y
+
 config SOC_SDM_GROUPS
     int
     default 1

components/soc/esp32/include/soc/soc_caps.h

@@ -291,6 +291,10 @@
 #define SOC_RTCIO_HOLD_SUPPORTED 1
 #define SOC_RTCIO_WAKE_SUPPORTED 1
 
+/* RTC_CNTL registers on this SoC are not atomic and require software protection
+ * (e.g., spinlocks) when accessed from multiple cores or threads. */
+#define SOC_RTC_CNTL_NEEDS_ATOMIC_ACCESS 1
+
 /*-------------------------- Sigma Delta Modulator CAPS -----------------*/
 #define SOC_SDM_GROUPS             1U
 #define SOC_SDM_CHANNELS_PER_GROUP 8

components/soc/esp32c2/include/soc/Kconfig.soc_caps.in

@@ -439,6 +439,10 @@ config SOC_RTC_CNTL_CPU_PD_REG_FILE_NUM
     int
     default 108
 
+config SOC_RTC_CNTL_NEEDS_ATOMIC_ACCESS
+    bool
+    default y
+
 config SOC_RTCIO_PIN_COUNT
     int
     default 0

components/soc/esp32c2/include/soc/soc_caps.h

@@ -195,6 +195,10 @@
 
 #define SOC_RTC_CNTL_CPU_PD_RETENTION_MEM_SIZE  (SOC_RTC_CNTL_CPU_PD_REG_FILE_NUM * (SOC_RTC_CNTL_CPU_PD_DMA_BUS_WIDTH >> 3))
 
+/* RTC_CNTL registers on this SoC are not atomic and require software protection
+ * (e.g., spinlocks) when accessed from multiple cores or threads. */
+#define SOC_RTC_CNTL_NEEDS_ATOMIC_ACCESS 1
+
 /*-------------------------- RTCIO CAPS --------------------------------------*/
 /* No dedicated RTCIO subsystem on ESP32-C2. RTC functions are still supported
  * for hold, wake & 32kHz crystal functions - via rtc_cntl_reg */

components/soc/esp32c3/include/soc/Kconfig.soc_caps.in

@@ -639,6 +639,10 @@ config SOC_RTC_CNTL_CPU_PD_REG_FILE_NUM
     int
     default 108
 
+config SOC_RTC_CNTL_NEEDS_ATOMIC_ACCESS
+    bool
+    default y
+
 config SOC_SLEEP_SYSTIMER_STALL_WORKAROUND
     bool
     default y

components/soc/esp32c3/include/soc/soc_caps.h

@@ -264,6 +264,10 @@
 
 #define SOC_RTC_CNTL_CPU_PD_RETENTION_MEM_SIZE  (SOC_RTC_CNTL_CPU_PD_REG_FILE_NUM * (SOC_RTC_CNTL_CPU_PD_DMA_BUS_WIDTH >> 3))
 
+/* RTC_CNTL registers on this SoC are not atomic and require software protection
+ * (e.g., spinlocks) when accessed from multiple cores or threads. */
+#define SOC_RTC_CNTL_NEEDS_ATOMIC_ACCESS 1
+
 #define SOC_SLEEP_SYSTIMER_STALL_WORKAROUND     1
 #define SOC_SLEEP_TGWDT_STOP_WORKAROUND         1
 

components/soc/esp32s2/include/soc/Kconfig.soc_caps.in

@@ -407,6 +407,10 @@ config SOC_GPIO_CLOCKOUT_CHANNEL_NUM
     int
     default 3
 
+config SOC_RTC_CNTL_NEEDS_ATOMIC_ACCESS
+    bool
+    default y
+
 config SOC_GPIO_SUPPORT_HOLD_IO_IN_DSLP
     bool
     default y

components/soc/esp32s2/include/soc/soc_caps.h

@@ -182,6 +182,10 @@
 #define SOC_GPIO_CLOCKOUT_BY_IO_MUX    (1)
 #define SOC_GPIO_CLOCKOUT_CHANNEL_NUM  (3)
 
+/* RTC_CNTL registers on this SoC are not atomic and require software protection
+ * (e.g., spinlocks) when accessed from multiple cores or threads. */
+#define SOC_RTC_CNTL_NEEDS_ATOMIC_ACCESS 1
+
 // RTC_IOs and DIG_IOs can be hold during deep sleep and after waking up
 #define SOC_GPIO_SUPPORT_HOLD_IO_IN_DSLP (1)
 

components/soc/esp32s3/include/soc/Kconfig.soc_caps.in

@@ -815,6 +815,10 @@ config SOC_RTC_CNTL_TAGMEM_PD_DMA_BUS_WIDTH
     int
     default 128
 
+config SOC_RTC_CNTL_NEEDS_ATOMIC_ACCESS
+    bool
+    default y
+
 config SOC_RTCIO_PIN_COUNT
     int
     default 22

components/soc/esp32s3/include/soc/soc_caps.h

@@ -314,6 +314,10 @@
 #define SOC_RTC_CNTL_TAGMEM_PD_DMA_BUS_WIDTH    (128)
 #define SOC_RTC_CNTL_TAGMEM_PD_DMA_ADDR_ALIGN   (SOC_RTC_CNTL_TAGMEM_PD_DMA_BUS_WIDTH >> 3)
 
+/* RTC_CNTL registers on this SoC are not atomic and require software protection
+ * (e.g., spinlocks) when accessed from multiple cores or threads. */
+#define SOC_RTC_CNTL_NEEDS_ATOMIC_ACCESS 1
+
 /*-------------------------- RTCIO CAPS --------------------------------------*/
 #define SOC_RTCIO_PIN_COUNT   22
 #define SOC_RTCIO_INPUT_OUTPUT_SUPPORTED 1  /* This macro indicates that the target has separate RTC IOMUX hardware feature,