fix(dsi): test apps manifest error

components/esp_hw_support/port/esp32p4/peripheral_domain_pd.c

@@ -28,7 +28,7 @@ bool peripheral_domain_pd_allowed(void)
     RETENTION_MODULE_BITMAP_SET(&mask, SLEEP_RETENTION_MODULE_TG0_TIMER1);
     RETENTION_MODULE_BITMAP_SET(&mask, SLEEP_RETENTION_MODULE_TG1_TIMER1);
 
-    // TODO: IDF-11369
+    // TODO: IDF-9921
     // RETENTION_MODULE_BITMAP_SET(&mask, SLEEP_RETENTION_MODULE_ADC);
 
     // ESP32P4 supports UART sleep retention
@@ -41,7 +41,7 @@ bool peripheral_domain_pd_allowed(void)
     // ESP32P4 supports RMT sleep retention
     RETENTION_MODULE_BITMAP_SET(&mask, SLEEP_RETENTION_MODULE_RMT0);
 
-    // TODO: IDF-11371
+    // TODO: IDF-9962
     // RETENTION_MODULE_BITMAP_SET(&mask, SLEEP_RETENTION_MODULE_GDMA_CH0);
     // RETENTION_MODULE_BITMAP_SET(&mask, SLEEP_RETENTION_MODULE_GDMA_CH1);
     // RETENTION_MODULE_BITMAP_SET(&mask, SLEEP_RETENTION_MODULE_GDMA_CH2);

components/esp_lcd/test_apps/.build-test-rules.yml

@@ -28,7 +28,7 @@ components/esp_lcd/test_apps/mipi_dsi_lcd:
     - esp_hw_support
     - soc
   disable:
-    - if: SOC_LCD_MIPI_DSI_SUPPORTED != 1
+    - if: SOC_MIPI_DSI_SUPPORTED != 1
   disable_test:
     - if: IDF_TARGET == "esp32p4"
       temporary: true

components/esp_lcd/test_apps/mipi_dsi_lcd/pytest_mipi_dsi_lcd.py

@@ -15,6 +15,7 @@ from pytest_embedded_idf.utils import idf_parametrize
     indirect=True,
 )
 @idf_parametrize('target', ['esp32p4'], indirect=['target'])
+@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='no runner')
 def test_dsi_lcd(dut: Dut) -> None:
     dut.run_all_single_board_cases()
 
@@ -28,6 +29,7 @@ def test_dsi_lcd(dut: Dut) -> None:
     indirect=True,
 )
 @idf_parametrize('target', ['esp32p4'], indirect=['target'])
+@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='no runner')
 def test_dsi_lcd_with_virt_flash_enc(dut: Dut) -> None:
     print(' - Erase flash')
     dut.serial.erase_flash()

components/soc/esp32p4/include/soc/reset_reasons.h

@@ -46,6 +46,7 @@ typedef enum {
     RESET_REASON_CORE_USB_UART     = 0x17, // USB Serial/JTAG controller's UART resets the digital core
     RESET_REASON_CPU_JTAG          = 0x18, // Triggered when a reset command from JTAG is received
     RESET_REASON_CPU_LOCKUP        = 0x1A, // Triggered when the CPU enters lockup (exception inside the exception handler would cause this)
+    RESET_REASON_SYS_PSDET         = 0x1B, // Power supply detect a glitch (>50ns)
 } soc_reset_reason_t;
 
 #ifdef __cplusplus

examples/peripherals/.build-test-rules.yml

@@ -320,7 +320,7 @@ examples/peripherals/lcd/i80_controller:
 
 examples/peripherals/lcd/mipi_dsi:
   disable:
-    - if: SOC_LCD_MIPI_DSI_SUPPORTED != 1
+    - if: SOC_MIPI_DSI_SUPPORTED != 1
   depends_components:
     - esp_driver_dma
     - esp_hal_lcd

examples/peripherals/lcd/mipi_dsi/main/Kconfig.projbuild

@@ -15,7 +15,7 @@ menu "Example Configuration"
 
     choice
         prompt "Select MIPI LCD model"
-        default EXAMPLE_LCD_EK79007_SUPPORT
+        default EXAMPLE_LCD_USE_EK79007
         help
             Select LCD controller model.
 

examples/peripherals/lcd/mipi_dsi/pytest_mipi_dsi_panel_lvgl.py

@@ -7,5 +7,5 @@ from pytest_embedded_idf.utils import idf_parametrize
 
 @pytest.mark.generic
 @idf_parametrize('target', ['esp32p4'], indirect=['target'])
-def test_rgb_lcd_lvgl(dut: Dut) -> None:
+def test_mipi_dsi_lcd_lvgl(dut: Dut) -> None:
-    dut.expect_exact('example: Install MIPI DSI LCD control panel')
+    dut.expect_exact('Calling app_main()')