feat(bt): Add host-agnostic BT OSAL and shared BLE profile task

- Add bt_osal: event queues, mutexes, semaphores, callouts, etc.
- Add the shared BLE profile task and event queue
- Bring both up and tear them down in the host init/deinit paths
- Add unit tests for the OSAL and the profile task

components/bt/host/bluedroid/Kconfig.in

@@ -1406,23 +1406,6 @@ config BT_BLE_RPA_TIMEOUT
         This set RPA timeout of Controller and Host.
         Default is 900 s (15 minutes). Range is 1 s to 1 hour (3600 s).
 
-config BT_BLE_HOST_ALLOW_SUB_SPEC_MIN_CONN_INT
-    bool "Allow BLE connection interval below Bluetooth Core Spec minimum (disable host check)"
-    depends on BT_BLE_ENABLED
-    default n
-    help
-        When enabled, the Bluedroid host skips the minimum BLE connection
-        interval validation (Bluetooth Core Spec minimum is 0x0006 / 7.5 ms)
-        and accepts any non-zero interval value from the application. The
-        BLE controller then enforces what is actually allowed; how small the
-        connection interval may be depends on controller capability and its
-        own configuration, not on this host option text.
-
-        End users should NOT set this option directly. In typical IDF builds it
-        follows the active Controller integration when that Controller supports
-        this mode; use the Controller's own configuration (menu entries and symbol
-        names differ by chip) instead of toggling this host symbol manually.
-
 menuconfig BT_BLE_50_FEATURES_SUPPORTED
     bool "Enable BLE 5.0 and above features(please disable BLE 4.2 if enable BLE 5.0)"
     depends on (BT_BLE_ENABLED && ((BT_CONTROLLER_ENABLED && SOC_BLE_50_SUPPORTED) || BT_CONTROLLER_DISABLED))

components/bt/host/bluedroid/api/esp_bt_main.c

@@ -17,6 +17,8 @@
 #include "config/stack_config.h"
 #include "hci_log/bt_hci_log.h"
 #include "bt_common.h"
+#include "bt_osal.h"
+#include "bt_prf_task.h"
 
 static esp_bluedroid_status_t s_bt_host_state = ESP_BLUEDROID_STATUS_UNINITIALIZED;
 
@@ -233,6 +235,17 @@ esp_err_t esp_bluedroid_init_with_cfg(esp_bluedroid_config_t *cfg)
     }
 #endif // (BT_HCI_LOG_INCLUDED == TRUE)
 
+    /* Bring up the host-agnostic bt_osal function table */
+    bt_osal_freertos_funcs_init();
+
+#if CONFIG_BT_PRF_TASK_ENABLED
+    /* Start the shared BLE profile task now that the bt_osal table is up, so
+     * profiles can post work without spawning their own tasks. */
+    if (bt_prf_task_init() != BT_OSAL_OK) {
+        LOG_WARN("bt_prf_task_init failed");
+    }
+#endif
+
     s_bt_host_state = ESP_BLUEDROID_STATUS_INITIALIZED;
 
     return ESP_OK;
@@ -289,6 +302,15 @@ esp_err_t esp_bluedroid_deinit(void)
     osi_mem_deinit();
 #endif
 
+#if CONFIG_BT_PRF_TASK_ENABLED
+    /* Stop the shared BLE profile task while the bt_osal table is still up,
+     * symmetrically with the init in esp_bluedroid_init_with_cfg(). */
+    bt_prf_task_deinit();
+#endif
+
+    /* Release the bt_osal function table set up in esp_bluedroid_init_with_cfg(). */
+    bt_osal_freertos_funcs_deinit();
+
     s_bt_host_state = ESP_BLUEDROID_STATUS_UNINITIALIZED;
     return ESP_OK;
 }