Merge branch 'fix/p4_eco5_enable_special_test_6.0' into 'release/v6.0'

fix(ci)p4 eco5 enable special test (v6.0)

See merge request espressif/esp-idf!44127

components/app_update/test_apps/test_app_update/.build-test-rules.yml

@@ -15,9 +15,6 @@ components/app_update/test_apps:
     - if: IDF_TARGET == "esp32c61" and CONFIG_NAME == "xip_psram_with_rom_impl"
       temporary: true
       reason: not supported yet  # TODO: [ESP32C61] IDF-12784
-    - if: IDF_TARGET == "esp32p4"
-      temporary: true
-      reason: p4 rev3 migration # TODO: IDF-14401
   disable_test:
     - if: CONFIG_NAME == "recovery_bootloader" and SOC_RECOVERY_BOOTLOADER_SUPPORTED == 1 and IDF_TARGET == "esp32c61"
       temporary: true

components/app_update/test_apps/test_app_update/README.md

@@ -1,2 +1,2 @@
-| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-C61 | ESP32-H2 | ESP32-S2 | ESP32-S3 |
+| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-C61 | ESP32-H2 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- |
+| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- |

components/esp_common/test_apps/.build-test-rules.yml

@@ -5,6 +5,3 @@ components/esp_common/test_apps/esp_common:
     - if: CONFIG_NAME == "psram" and SOC_SPIRAM_SUPPORTED != 1
     - if: CONFIG_NAME == "psram_noinit" and SOC_SPIRAM_SUPPORTED != 1
     - if: CONFIG_NAME == "xip_psram" and SOC_SPIRAM_XIP_SUPPORTED != 1
-    - if: IDF_TARGET == "esp32p4"
-      temporary: true
-      reason: p4 rev3 migration # TODO: IDF-14404

components/esp_common/test_apps/esp_common/README.md

@@ -1,2 +1,2 @@
-| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-C61 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-S2 | ESP32-S3 |
+| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-C61 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | --------- | -------- | -------- | -------- |
+| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | --------- | -------- | -------- | -------- | -------- |

components/esp_driver_cam/test_apps/.build-test-rules.yml

@@ -1,9 +1,6 @@
 components/esp_driver_cam/test_apps/csi:
   disable:
     - if: SOC_MIPI_CSI_SUPPORTED != 1
-    - if: IDF_TARGET == "esp32p4" # TODO: IDF-14358
-      temporary: true
-      reason: p4 rev3 migration
   depends_components:
     - esp_driver_cam
 

components/esp_driver_i2c/test_apps/i2c_test_apps/pytest_i2c.py

@@ -21,7 +21,6 @@ def test_i2c(dut: Dut) -> None:
 
 
 @pytest.mark.generic_multi_device
-@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='p4 rev3 migration # TODO: IDF-14395')
 @pytest.mark.parametrize(
     'count, config',
     [

components/esp_driver_i2s/test_apps/.build-test-rules.yml

@@ -12,7 +12,7 @@ components/esp_driver_i2s/test_apps/i2s_multi_dev:
     - if: SOC_I2S_SUPPORTED != 1
     - if: SOC_I2S_HW_VERSION_2 != 1
   disable_test:
-    - if: IDF_TARGET in ["esp32c61", "esp32p4"]  # TODO: [ESP32C61] IDF-11442, TODO: IDF-14396
+    - if: IDF_TARGET in ["esp32c61"]  # TODO: [ESP32C61] IDF-11442
       temporary: true
       reason: lack of runners
   depends_components:

components/esp_driver_i2s/test_apps/i2s_multi_dev/pytest_i2s_multi_dev.py

@@ -6,7 +6,6 @@ from pytest_embedded_idf.utils import soc_filtered_targets
 
 
 @pytest.mark.generic_multi_device
-@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='p4 rev3 migration # TODO: IDF-14396')
 @pytest.mark.parametrize('count', [2], indirect=True)
 @idf_parametrize('target', soc_filtered_targets('SOC_I2S_SUPPORTS_TDM == 1'), indirect=['target'])
 def test_i2s_multi_dev(case_tester) -> None:  # type: ignore

components/esp_driver_i3c/test_apps/i3c_test_apps/pytest_i3c.py

@@ -21,7 +21,6 @@ def test_i3c(dut: Dut) -> None:
 
 
 @pytest.mark.generic_multi_device
-@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='p4 rev3 migration # TODO: IDF-14397')
 @pytest.mark.parametrize(
     'count, config',
     [

components/esp_driver_ledc/test_apps/ledc/pytest_ledc.py

@@ -16,7 +16,6 @@ from pytest_embedded_idf.utils import idf_parametrize
     indirect=True,
 )
 @idf_parametrize('target', ['supported_targets'], indirect=['target'])
-@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='p4 rev3 migration # TODO: IDF-14398')
 def test_ledc(dut: IdfDut) -> None:
     dut.run_all_single_board_cases(reset=True)
 
@@ -36,7 +35,6 @@ def test_ledc_psram(dut: IdfDut) -> None:
 
 
 @pytest.mark.temp_skip_ci(targets=['esp32s3'], reason='s3 multi device runner has no psram')
-@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='p4 rev3 migration # TODO: IDF-14398')
 @pytest.mark.generic_multi_device
 @pytest.mark.parametrize(
     'count, config',

components/esp_driver_parlio/test_apps/.build-test-rules.yml

@@ -3,9 +3,5 @@
 components/esp_driver_parlio/test_apps/parlio:
   disable:
     - if: SOC_PARLIO_SUPPORTED != 1
-  disable_test:
-    - if: IDF_TARGET == "esp32p4"
-      temporary: true
-      reason: p4 rev3 migration # TODO: IDF-14413
   depends_components:
     - esp_driver_parlio

components/esp_driver_parlio/test_apps/parlio/pytest_parlio_unity.py

@@ -15,6 +15,5 @@ from pytest_embedded_idf.utils import idf_parametrize
     indirect=True,
 )
 @idf_parametrize('target', ['esp32c5', 'esp32c6', 'esp32h2', 'esp32p4'], indirect=['target'])
-@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='p4 rev3 migration # TODO: IDF-14413')
 def test_parlio(dut: Dut) -> None:
     dut.run_all_single_board_cases()

components/esp_driver_rmt/test_apps/.build-test-rules.yml

@@ -3,9 +3,5 @@
 components/esp_driver_rmt/test_apps/rmt:
   disable:
     - if: SOC_RMT_SUPPORTED != 1
-  disable_test:
-    - if: IDF_TARGET == "esp32p4"
-      temporary: true
-      reason: p4 rev3 migration # TODO: IDF-14414
   depends_components:
     - esp_driver_rmt

components/esp_driver_rmt/test_apps/rmt/pytest_rmt.py

@@ -17,7 +17,6 @@ from pytest_embedded_idf.utils import idf_parametrize
 @idf_parametrize(
     'target', ['esp32', 'esp32s2', 'esp32c3', 'esp32c5', 'esp32c6', 'esp32h2', 'esp32p4'], indirect=['target']
 )
-@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='p4 rev3 migration # TODO: IDF-14414')
 def test_rmt(dut: Dut) -> None:
     dut.run_all_single_board_cases()
 

components/esp_driver_sdio/test_apps/.build-test-rules.yml

@@ -2,10 +2,6 @@ components/esp_driver_sdio/test_apps/sdio/sdio_common_tests/host_sdmmc:
   enable:
     - if: IDF_TARGET in ["esp32", "esp32p4"]
       reason: runners use ESP32 / ESP32P4 SDMMC as host
-  disable:
-    - if: IDF_TARGET == "esp32p4"
-      temporary: true
-      reason: p4 rev3 migration # TODO: IDF-14359
   depends_components:
     - sdmmc
     - esp_driver_sdmmc

components/esp_driver_sdio/test_apps/sdio/sdio_common_tests/host_sdmmc/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32 |
+| Supported Targets | ESP32 | ESP32-P4 |
-| ----------------- | ----- |
+| ----------------- | ----- | -------- |
 
 # SDIO Cross Chips Test Apps: SDMMC Host App
 

components/esp_driver_sdio/test_apps/sdio/sdio_common_tests/host_sdmmc/main/test_app_main.c

@@ -9,7 +9,7 @@
 #include "esp_heap_caps.h"
 
 // Some resources are lazy allocated, the threadhold is left for that case
-#define TEST_MEMORY_LEAK_THRESHOLD (700)
+#define TEST_MEMORY_LEAK_THRESHOLD (800)
 
 static size_t before_free_8bit;
 static size_t before_free_32bit;

components/esp_driver_sdio/test_apps/sdio/sdio_common_tests/host_sdmmc/sdkconfig.defaults.esp32p4

@@ -0,0 +1 @@
+CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG=y

components/esp_driver_sdmmc/test_apps/sdmmc/sdkconfig.defaults.esp32p4

@@ -3,3 +3,4 @@ CONFIG_SDMMC_BOARD_ESP32P4_EV_BOARD=y
 CONFIG_SPIRAM=y
 CONFIG_IDF_EXPERIMENTAL_FEATURES=y
 CONFIG_SPIRAM_SPEED_200M=y
+CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG=y

components/esp_driver_sdspi/test_apps/.build-test-rules.yml

@@ -1,9 +1,6 @@
 components/esp_driver_sdspi/test_apps/sdspi:
   disable:
     - if: SOC_GPSPI_SUPPORTED != 1
-    - if: IDF_TARGET == "esp32p4"
-      temporary: true
-      reason: p4 rev3 migration # TODO: IDF-14363
   disable_test:
     - if: IDF_TARGET not in ["esp32", "esp32s3", "esp32c3", "esp32c5", "esp32p4"]
       reason: needs special runner, select few typical targets for testing

components/esp_driver_sdspi/test_apps/sdspi/README.md

@@ -1,2 +1,2 @@
-| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-C61 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-S2 | ESP32-S3 |
+| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-C61 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | --------- | -------- | -------- | -------- |
+| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | --------- | -------- | -------- | -------- | -------- |

components/esp_driver_spi/test_apps/.build-test-rules.yml

@@ -9,10 +9,6 @@
 components/esp_driver_spi/test_apps/master:
   disable:
     - if: SOC_GPSPI_SUPPORTED != 1
-  disable_test:
-    - if: IDF_TARGET == "esp32p4"
-      temporary: true
-      reason: p4 rev3 migration # TODO: IDF-14399
   <<: *spi_depends_default
 
 components/esp_driver_spi/test_apps/param:

components/esp_driver_spi/test_apps/master/pytest_spi_master.py

@@ -14,7 +14,6 @@ from pytest_embedded_idf.utils import idf_parametrize
     indirect=True,
 )
 @idf_parametrize('target', ['supported_targets'], indirect=['target'])
-@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='p4 rev3 migration # TODO: IDF-14399')
 def test_master_single_dev(case_tester) -> None:  # type: ignore
     for case in case_tester.test_menu:
         if 'test_env' in case.attributes:
@@ -40,7 +39,6 @@ def test_master_esp_flash(case_tester) -> None:  # type: ignore
 
 
 @pytest.mark.generic_multi_device
-@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='p4 rev3 migration # TODO: IDF-14399')
 @pytest.mark.parametrize(
     'count, config',
     [

components/esp_driver_spi/test_apps/param/pytest_spi_param.py

@@ -13,6 +13,5 @@ def test_param_single_dev(case_tester) -> None:  # type: ignore
 @pytest.mark.generic_multi_device
 @pytest.mark.parametrize('count', [2], indirect=True)
 @idf_parametrize('target', ['supported_targets'], indirect=['target'])
-@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='p4 rev3 migration # TODO: IDF-14399')
 def test_param_multi_dev(case_tester) -> None:  # type: ignore
     case_tester.run_all_multi_dev_cases(reset=True)

components/esp_driver_spi/test_apps/slave/pytest_spi_slave.py

@@ -13,7 +13,6 @@ def test_slave_single_dev(case_tester) -> None:  # type: ignore
 
 @pytest.mark.generic_multi_device
 @pytest.mark.parametrize('count, config', [(2, 'release'), (2, 'iram_safe')], indirect=True)
-@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='p4 rev3 migration # TODO: IDF-14399')
 @idf_parametrize('target', ['supported_targets'], indirect=['target'])
 def test_slave_multi_dev(case_tester) -> None:  # type: ignore
     case_tester.run_all_multi_dev_cases(reset=True)

components/esp_driver_spi/test_apps/slave_hd/pytest_spi_slave_hd.py

@@ -15,7 +15,6 @@ def test_slave_hd_single_dev(case_tester) -> None:  # type: ignore
 
 @pytest.mark.generic_multi_device
 @pytest.mark.parametrize('count, config', [(2, 'release')], indirect=True)
-@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='p4 rev3 migration # TODO: IDF-14399')
 @idf_parametrize('target', soc_filtered_targets('SOC_SPI_SUPPORT_SLAVE_HD_VER2 == 1'), indirect=['target'])
 def test_slave_hd_multi_dev(case_tester) -> None:  # type: ignore
     case_tester.run_all_multi_dev_cases(reset=True)

components/esp_hw_support/test_apps/.build-test-rules.yml

@@ -13,10 +13,6 @@ components/esp_hw_support/test_apps/dma:
 components/esp_hw_support/test_apps/dma2d:
   disable:
     - if: SOC_DMA2D_SUPPORTED != 1
-  disable_test:
-    - if: IDF_TARGET == "esp32p4"
-      temporary: true
-      reason: p4 rev3 migration # TODO: IDF-14471
   depends_filepatterns:
     - components/esp_hw_support/dma/**/*
   depends_components:
@@ -29,9 +25,6 @@ components/esp_hw_support/test_apps/host_test_linux:
 components/esp_hw_support/test_apps/mspi:
   disable:
     - if: IDF_TARGET not in ["esp32s3", "esp32p4"]
-    - if: IDF_TARGET == "esp32p4"
-      temporary: true
-      reason: p4 rev3 migration # TODO: IDF-14366
 
 components/esp_hw_support/test_apps/mspi_psram_with_dfs:
   disable:
@@ -44,10 +37,6 @@ components/esp_hw_support/test_apps/rtc_8md256:
 components/esp_hw_support/test_apps/rtc_clk:
   disable:
     - if: SOC_CLK_TREE_SUPPORTED != 1
-  disable_test:
-    - if: IDF_TARGET == "esp32p4"
-      temporary: true
-      reason: p4 rev3 migration # TODO: IDF-14441
 
 components/esp_hw_support/test_apps/rtc_power_modes:
   enable:
@@ -76,9 +65,6 @@ components/esp_hw_support/test_apps/usb_phy:
 components/esp_hw_support/test_apps/vad_wakeup:
   disable:
     - if: SOC_LP_VAD_SUPPORTED != 1
-    - if: IDF_TARGET == "esp32p4"
-      temporary: true
-      reason: p4 rev3 migration # TODO: IDF-14368
 
 components/esp_hw_support/test_apps/wakeup_tests:
   enable:

components/esp_hw_support/test_apps/dma2d/pytest_dma2d.py

@@ -15,6 +15,5 @@ from pytest_embedded_idf.utils import soc_filtered_targets
     indirect=True,
 )
 @idf_parametrize('target', soc_filtered_targets('SOC_DMA2D_SUPPORTED == 1'), indirect=['target'])
-@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='p4 rev3 migration # TODO: IDF-14471')
 def test_dma2d(dut: Dut) -> None:
     dut.run_all_single_board_cases()

components/esp_hw_support/test_apps/mspi/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32-S3 |
+| Supported Targets | ESP32-P4 | ESP32-S3 |
-| ----------------- | -------- |
+| ----------------- | -------- | -------- |
 
 This project tests if Flash and PSRAM can work under different configurations.
 To add new configuration, create one more sdkconfig.ci.NAME file in this directory.

components/esp_hw_support/test_apps/rtc_clk/main/test_rtc_clk.c

@@ -261,6 +261,7 @@ static void start_freq(soc_rtc_slow_clk_src_t required_src, uint32_t start_delay
             printf("PASS");
         }
         printf(" [calibration val = %"PRIu32"] \n", esp_clk_slowclk_cal_get());
+        rtc_clk_slow_src_set(SOC_RTC_SLOW_CLK_SRC_DEFAULT);
         stop_rtc_external_quartz();
         esp_rom_delay_us(500000);
     }
@@ -302,6 +303,7 @@ TEST_CASE("Test starting external RTC quartz", "[rtc_clk][test_env=xtal32k]")
         } else {
             printf("PASS\n");
         }
+        rtc_clk_slow_src_set(SOC_RTC_SLOW_CLK_SRC_DEFAULT);
         stop_rtc_external_quartz();
         esp_rom_delay_us(100000);
     }

components/esp_hw_support/test_apps/rtc_clk/pytest_rtc_clk.py

@@ -10,7 +10,6 @@ from pytest_embedded_idf.utils import soc_filtered_targets
 
 @pytest.mark.generic
 @idf_parametrize('target', soc_filtered_targets('SOC_CLK_TREE_SUPPORTED == 1'), indirect=['target'])
-@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='p4 rev3 migration # TODO: IDF-14441')
 def test_rtc_clk(case_tester: CaseTester) -> None:
     for case in case_tester.test_menu:
         if 'test_env' in case.attributes:

components/esp_hw_support/test_apps/vad_wakeup/pytest_wakeup_vad.py

@@ -6,7 +6,6 @@ from pytest_embedded_idf.utils import idf_parametrize
 from pytest_embedded_idf.utils import soc_filtered_targets
 
 
-@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='lack of runners for now')
 @pytest.mark.lp_i2s
 @idf_parametrize('target', soc_filtered_targets('SOC_LP_VAD_SUPPORTED == 1'), indirect=['target'])
 def test_efuse_component_ut(dut: Dut) -> None:

components/esp_hw_support/test_apps/vad_wakeup/sdkconfig.defaults

@@ -4,5 +4,3 @@ CONFIG_ULP_COPROC_ENABLED=y
 CONFIG_ULP_COPROC_TYPE_LP_CORE=y
 CONFIG_ULP_COPROC_RESERVE_MEM=12000
 CONFIG_ULP_PANIC_OUTPUT_ENABLE=y
-
-CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG=y

components/esp_mm/test_apps/.build-test-rules.yml

@@ -1,7 +0,0 @@
-# Documentation: .gitlab/ci/README.md#manifest-file-to-control-the-buildtest-apps
-
-components/esp_mm/test_apps/mm:
-  disable_test:
-    - if: IDF_TARGET == "esp32p4"
-      temporary: true
-      reason: p4 rev3 migration # TODO: IDF-14470

components/esp_mm/test_apps/mm/pytest_mmap.py

@@ -71,7 +71,6 @@ def test_cache(dut: Dut) -> None:
     ],
     indirect=['config', 'target'],
 )
-@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='h4 rev3 migration # TODO: IDF-14470')
 def test_cache_psram(dut: Dut) -> None:
     dut.run_all_single_board_cases(group='cache')
 

examples/storage/.build-test-rules.yml

@@ -14,10 +14,6 @@ examples/storage/emmc:
   enable:
     - if: IDF_TARGET in ["esp32s3", "esp32p4"]
       reason: only support on esp32s3 and esp32p4
-  disable:
-    - if: IDF_TARGET == "esp32p4"
-      temporary: true
-      reason: p4 rev3 migration # TODO: IDF-14356
 
 examples/storage/partition_api/partition_find:
   depends_components:
@@ -75,7 +71,7 @@ examples/storage/sd_card/sdmmc:
   disable:
     - if: SOC_SDMMC_HOST_SUPPORTED != 1
   disable_test:
-    - if: IDF_TARGET not in ["esp32"]
+    - if: IDF_TARGET not in ["esp32", "esp32p4"]
       temporary: true
       reason: lack of runners
 
@@ -86,9 +82,6 @@ examples/storage/sd_card/sdspi:
     - esp_driver_sdspi
   disable:
     - if: SOC_GPSPI_SUPPORTED != 1
-    - if: IDF_TARGET == "esp32p4"
-      temporary: true
-      reason: p4 rev3 migration # TODO: IDF-14363
   disable_test:
     - if: IDF_TARGET not in ["esp32", "esp32s3", "esp32c3", "esp32c5", "esp32p4"]
       reason: needs special runner, select few typical targets for testing

examples/storage/emmc/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32-S3 |
+| Supported Targets | ESP32-P4 | ESP32-S3 |
-| ----------------- | -------- |
+| ----------------- | -------- | -------- |
 
 # eMMC chip example (with SDMMC Host)
 

examples/storage/sd_card/sdmmc/pytest_sdmmc_card_example.py

@@ -9,7 +9,7 @@ from pytest_embedded_idf.utils import idf_parametrize
 
 
 @pytest.mark.sdcard_sdmode
-@idf_parametrize('target', ['esp32'], indirect=['target'])
+@idf_parametrize('target', ['esp32', 'esp32p4'], indirect=['target'])
 def test_examples_sd_card_sdmmc(dut: Dut) -> None:
     dut.expect('example: Initializing SD card', timeout=20)
     dut.expect('example: Using SDMMC peripheral', timeout=10)
@@ -23,14 +23,14 @@ def test_examples_sd_card_sdmmc(dut: Dut) -> None:
     speed = dut.expect(re.compile(rb'Speed: (\S+)'), timeout=10).group(1).decode()
     size = dut.expect(re.compile(rb'Size: (\S+)'), timeout=10).group(1).decode()
 
-    logging.info('Card {} {} {}MHz {} found'.format(name, _type, speed, size))
+    logging.info(f'Card {name} {_type} {speed}MHz {size} found')
 
     message_list1 = (
         'Opening file /sdcard/hello.txt',
         'File written',
         'Renaming file /sdcard/hello.txt to /sdcard/foo.txt',
         'Reading file /sdcard/foo.txt',
-        "Read from file: 'Hello {}!'".format(name),
+        f"Read from file: 'Hello {name}!'",
     )
     sd_card_format = re.compile(str.encode('Formatting card, allocation unit size=\\S+'))
     message_list2 = (
@@ -38,7 +38,7 @@ def test_examples_sd_card_sdmmc(dut: Dut) -> None:
         'Opening file /sdcard/nihao.txt',
         'File written',
         'Reading file /sdcard/nihao.txt',
-        "Read from file: 'Nihao {}!'".format(name),
+        f"Read from file: 'Nihao {name}!'",
         'Card unmounted',
     )
 

examples/storage/sd_card/sdspi/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-C61 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-S2 | ESP32-S3 |
+| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-C61 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | --------- | -------- | -------- | -------- |
+| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | --------- | -------- | -------- | -------- | -------- |
 
 # SD Card example (SDSPI)
 

examples/system/.build-test-rules.yml

@@ -1,10 +1,6 @@
 # Documentation: .gitlab/ci/README.md#manifest-file-to-control-the-buildtest-apps
 
 examples/system/app_trace_basic:
-  disable:
-    - if: IDF_TARGET == "esp32p4"
-      temporary: true
-      reason: p4 rev3 migration # TODO: IDF-14364
   disable_test:
     - if: IDF_TARGET == "esp32h21"
       temporary: true
@@ -266,9 +262,6 @@ examples/system/select:
 examples/system/sysview_tracing:
   disable:
     - if: SOC_GPTIMER_SUPPORTED != 1
-    - if: IDF_TARGET == "esp32p4"
-      temporary: true
-      reason: p4 rev3 migration # TODO: IDF-14364
   disable_test:
     - if: IDF_TARGET == "esp32h21"
       temporary: true
@@ -280,9 +273,6 @@ examples/system/sysview_tracing:
 examples/system/sysview_tracing_heap_log:
   disable:
     - if: SOC_GPTIMER_SUPPORTED != 1
-    - if: IDF_TARGET == "esp32p4"
-      temporary: true
-      reason: p4 rev3 migration # TODO: IDF-14364
   disable_test:
     - if: IDF_TARGET == "esp32h21"
       temporary: true

examples/system/app_trace_basic/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-C61 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-S2 | ESP32-S3 |
+| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-C61 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | --------- | -------- | -------- | -------- |
+| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | --------- | -------- | -------- | -------- | -------- |
 
 # Application Level Tracing Example (Basic)
 

examples/system/sysview_tracing/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-C61 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-S2 | ESP32-S3 |
+| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-C61 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | --------- | -------- | -------- | -------- |
+| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | --------- | -------- | -------- | -------- | -------- |
 # Example: Application Level Tracing - SystemView Tracing (sysview_tracing)
 
 This test code shows how to perform system-wide behavioral analysis of the program using [SEGGER SystemView tool](https://www.segger.com/products/development-tools/systemview/).

examples/system/sysview_tracing_heap_log/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-C61 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-S2 | ESP32-S3 |
+| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-C61 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | --------- | -------- | -------- | -------- |
+| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | --------- | -------- | -------- | -------- | -------- |
 
 # SystemView Heap and Log Tracing Example