Merge branch 'fix/p4_eco5_enable_special_test_6.0' into 'release/v6.0'

fix(ci)p4 eco5 enable special test (v6.0)

See merge request espressif/esp-idf!44127

components/esp_hw_support/test_apps/.build-test-rules.yml

@@ -13,10 +13,6 @@ components/esp_hw_support/test_apps/dma:
 components/esp_hw_support/test_apps/dma2d:
   disable:
     - if: SOC_DMA2D_SUPPORTED != 1
-  disable_test:
-    - if: IDF_TARGET == "esp32p4"
-      temporary: true
-      reason: p4 rev3 migration # TODO: IDF-14471
   depends_filepatterns:
     - components/esp_hw_support/dma/**/*
   depends_components:
@@ -29,9 +25,6 @@ components/esp_hw_support/test_apps/host_test_linux:
 components/esp_hw_support/test_apps/mspi:
   disable:
     - if: IDF_TARGET not in ["esp32s3", "esp32p4"]
-    - if: IDF_TARGET == "esp32p4"
-      temporary: true
-      reason: p4 rev3 migration # TODO: IDF-14366
 
 components/esp_hw_support/test_apps/mspi_psram_with_dfs:
   disable:
@@ -44,10 +37,6 @@ components/esp_hw_support/test_apps/rtc_8md256:
 components/esp_hw_support/test_apps/rtc_clk:
   disable:
     - if: SOC_CLK_TREE_SUPPORTED != 1
-  disable_test:
-    - if: IDF_TARGET == "esp32p4"
-      temporary: true
-      reason: p4 rev3 migration # TODO: IDF-14441
 
 components/esp_hw_support/test_apps/rtc_power_modes:
   enable:
@@ -76,9 +65,6 @@ components/esp_hw_support/test_apps/usb_phy:
 components/esp_hw_support/test_apps/vad_wakeup:
   disable:
     - if: SOC_LP_VAD_SUPPORTED != 1
-    - if: IDF_TARGET == "esp32p4"
-      temporary: true
-      reason: p4 rev3 migration # TODO: IDF-14368
 
 components/esp_hw_support/test_apps/wakeup_tests:
   enable:

components/esp_hw_support/test_apps/dma2d/pytest_dma2d.py

@@ -15,6 +15,5 @@ from pytest_embedded_idf.utils import soc_filtered_targets
     indirect=True,
 )
 @idf_parametrize('target', soc_filtered_targets('SOC_DMA2D_SUPPORTED == 1'), indirect=['target'])
-@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='p4 rev3 migration # TODO: IDF-14471')
 def test_dma2d(dut: Dut) -> None:
     dut.run_all_single_board_cases()

components/esp_hw_support/test_apps/mspi/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32-S3 |
-| ----------------- | -------- |
+| Supported Targets | ESP32-P4 | ESP32-S3 |
+| ----------------- | -------- | -------- |
 
 This project tests if Flash and PSRAM can work under different configurations.
 To add new configuration, create one more sdkconfig.ci.NAME file in this directory.

components/esp_hw_support/test_apps/rtc_clk/main/test_rtc_clk.c

@@ -261,6 +261,7 @@ static void start_freq(soc_rtc_slow_clk_src_t required_src, uint32_t start_delay
             printf("PASS");
         }
         printf(" [calibration val = %"PRIu32"] \n", esp_clk_slowclk_cal_get());
+        rtc_clk_slow_src_set(SOC_RTC_SLOW_CLK_SRC_DEFAULT);
         stop_rtc_external_quartz();
         esp_rom_delay_us(500000);
     }
@@ -302,6 +303,7 @@ TEST_CASE("Test starting external RTC quartz", "[rtc_clk][test_env=xtal32k]")
         } else {
             printf("PASS\n");
         }
+        rtc_clk_slow_src_set(SOC_RTC_SLOW_CLK_SRC_DEFAULT);
         stop_rtc_external_quartz();
         esp_rom_delay_us(100000);
     }

components/esp_hw_support/test_apps/rtc_clk/pytest_rtc_clk.py

@@ -10,7 +10,6 @@ from pytest_embedded_idf.utils import soc_filtered_targets
 
 @pytest.mark.generic
 @idf_parametrize('target', soc_filtered_targets('SOC_CLK_TREE_SUPPORTED == 1'), indirect=['target'])
-@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='p4 rev3 migration # TODO: IDF-14441')
 def test_rtc_clk(case_tester: CaseTester) -> None:
     for case in case_tester.test_menu:
         if 'test_env' in case.attributes:

components/esp_hw_support/test_apps/vad_wakeup/pytest_wakeup_vad.py

@@ -6,7 +6,6 @@ from pytest_embedded_idf.utils import idf_parametrize
 from pytest_embedded_idf.utils import soc_filtered_targets
 
 
-@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='lack of runners for now')
 @pytest.mark.lp_i2s
 @idf_parametrize('target', soc_filtered_targets('SOC_LP_VAD_SUPPORTED == 1'), indirect=['target'])
 def test_efuse_component_ut(dut: Dut) -> None:

components/esp_hw_support/test_apps/vad_wakeup/sdkconfig.defaults

@@ -4,5 +4,3 @@ CONFIG_ULP_COPROC_ENABLED=y
 CONFIG_ULP_COPROC_TYPE_LP_CORE=y
 CONFIG_ULP_COPROC_RESERVE_MEM=12000
 CONFIG_ULP_PANIC_OUTPUT_ENABLE=y
-
-CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG=y