Merge branch 'tracing_test_fixes_v6.0' into 'release/v6.0'

Tracing test fixes (v6.0)

See merge request espressif/esp-idf!52328

components/app_trace/Kconfig.apptrace

@@ -47,7 +47,6 @@ menu "Application Level Tracing"
     config APPTRACE_UART_TX_GPIO
         int "UART TX on GPIO<num>"
         depends on APPTRACE_DEST_UART
-        range 0 46
         default 12
         help
             This GPIO is used for UART TX pin.
@@ -55,7 +54,6 @@ menu "Application Level Tracing"
     config APPTRACE_UART_RX_GPIO
         int "UART RX on GPIO<num>"
         depends on APPTRACE_DEST_UART
-        range 0 46
         default 13
         help
             This GPIO is used for UART RX pin.

components/app_trace/app_trace_membufs_proto.c

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2021-2025 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2021-2026 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0 OR MIT
  */
@@ -75,7 +75,7 @@ static esp_err_t esp_apptrace_membufs_swap(esp_apptrace_membufs_proto_data_t *pr
 
     esp_err_t res = proto->hw->swap_start(proto->state.in_block);
     if (res != ESP_OK) {
-        ESP_APPTRACE_LOGE("Failed to swap to new block: %d", res);
+        ESP_APPTRACE_LOGV("Failed to swap to new block: %s", esp_err_to_name(res));
         return res;
     }
 
@@ -100,7 +100,7 @@ static esp_err_t esp_apptrace_membufs_swap(esp_apptrace_membufs_proto_data_t *pr
                           *(p - 8), *(p - 7), *(p - 6), *(p - 5), *(p - 4), *(p - 3), *(p - 2), *(p - 1));
         uint32_t sz = esp_apptrace_membufs_down_buffer_write_nolock(proto, (uint8_t *)(hdr + 1), hdr->block_sz);
         if (sz != hdr->block_sz) {
-            ESP_APPTRACE_LOGE("Failed to write %" PRIu32 " bytes to down buffer (%" PRIu16 " %" PRIu32 ")!",
+            ESP_APPTRACE_LOGE("Failed to write %" PRIu32 " bytes to down buffer (%" PRIu32 " %" PRIu32 ")!",
                               hdr->block_sz - sz, hdr->block_sz, sz);
         }
         hdr->block_sz = 0;
@@ -149,20 +149,18 @@ uint8_t *esp_apptrace_membufs_down_buffer_get(esp_apptrace_membufs_proto_data_t
             }
             break;
         }
-        // may need to flush
+        // may need to flush to expose host down-channel data
         if (proto->hw->host_data_pending()) {
             ESP_APPTRACE_LOGD("force flush");
             int res = esp_apptrace_membufs_swap_waitus(proto, tmo);
-            if (res != ESP_OK) {
-                ESP_APPTRACE_LOGE("Failed to switch to another block to recv data from host!");
-                /*do not return error because data can be in down buffer already*/
-            }
-        } else {
-            // check tmo only if there is no data from host
-            int res = esp_apptrace_tmo_check(tmo);
-            if (res != ESP_OK) {
-                return NULL;
+            if (res == ESP_OK) {
+                continue; /* re-check rb_down */
             }
+            ESP_APPTRACE_LOGE("Failed to switch to another block to recv data from host!");
+        }
+        /* Check the timeout even while host data is pending so a zero timeout returns immediately instead of spinning. */
+        if (esp_apptrace_tmo_check(tmo) != ESP_OK) {
+            return NULL;
         }
     }
     return ptr;

components/esp_system/panic.c

@@ -343,7 +343,7 @@ void esp_panic_handler(panic_info_t *info)
     // then only print up to details. Users should be able to probe for the other information
     // in debug mode.
 #if CONFIG_ESP_DEBUG_OCDAWARE
-    if (esp_cpu_dbgr_is_attached()) {
+    if (esp_cpu_dbgr_is_attached() && g_panic_entry_count[esp_cpu_get_core_id()] <= 1) {
         char *panic_reason_str = NULL;
         if (info->pseudo_excause) {
             panic_reason_str = (char *)info->reason;

components/esp_trace/Kconfig

@@ -76,12 +76,13 @@ menu "ESP Trace Configuration"
         config ESP_TRACE_USJ_TX_BUFFER_SIZE
             int "TX buffer size"
             default 2048
-            range 256 32768
+            range 2048 32768
             help
                 Size of the TX ring buffer for USB Serial JTAG trace transport.
                 Larger buffer allows more trace data to be queued before blocking.
 
-                Note: Buffer size must be a power of 2.
+                Note: Buffer size must be a power of 2. Minimum is 2048 since
+                smaller buffers overflow easily on the USJ transport.
 
     endmenu
 

components/esp_trace/README.md

@@ -420,7 +420,7 @@ For detailed usage instructions, see:
 ## Examples
 
 Examples demonstrating trace usage can be found in:
-- `examples/system/app_trace_basic/` - Basic application tracing
-- `examples/system/sysview_tracing/` - SystemView tracing example
-- `examples/system/esp_trace_custom_library/` - Minimal template for integrating an external trace library (encoder + FreeRTOS hooks + vtable lock)
-- `examples/system/sysview_tracing_heap_log/` - SystemView heap and log tracing example
+- `examples/system/tracing/app_trace_basic/` - Basic application tracing
+- `examples/system/tracing/sysview_tracing/` - SystemView tracing example
+- `examples/system/tracing/esp_trace_custom_library/` - Minimal template for integrating an external trace library (encoder + FreeRTOS hooks + vtable lock)
+- `examples/system/tracing/sysview_tracing_heap_log/` - SystemView heap and log tracing example

components/esp_trace/adapters/transport/adapter_transport_usb_serial_jtag.c

@@ -15,6 +15,8 @@
  * is responsible for serializing access using esp_trace_lock_init(), esp_trace_lock_take(),
  * and esp_trace_lock_give(). All transport operations (read, write, flush_nolock) are
  * invoked while the encoder holds the lock, so no transport-level locking is required.
+ *
+ * Logging: use ESP_EARLY_LOGx only, ESP_LOGx is not safe in ISR context.
  */
 
 #include <stdlib.h>
@@ -29,6 +31,7 @@
 #include "esp_cpu.h"
 #include "esp_attr.h"
 #include "esp_rom_caps.h"
+#include "esp_rom_sys.h"
 #include "esp_heap_caps.h"
 #include "esp_private/periph_ctrl.h"
 #include "hal/usb_serial_jtag_ll.h"
@@ -51,7 +54,6 @@ static const char *TAG = "usj_transport";
  */
 typedef enum {
     USJ_TX_IDLE,
-    USJ_TX_SHORT_PENDING,
     USJ_TX_ZLP_PENDING,
 } usj_tx_state_t;
 
@@ -67,11 +69,8 @@ typedef struct {
     uint32_t flush_thresh;              ///< Flush threshold in bytes
 } usj_ctx_t;
 
-/*
- * flush_nolock() runs with interrupts masked, so normal flushes use a short
- * fixed timeout even if an encoder requests a longer one.
- */
-#define USJ_FLUSH_TIMEOUT_US            (1000)      // 1 ms
+/* Default flush timeout, used on non-masked paths (e.g. panic handler). */
+#define USJ_FLUSH_TIMEOUT_US            (1000000)   // 1 s
 #define USJ_FLUSH_THRESH_BYTES          (0)         // 0 bytes
 #define USJ_FLUSH_MAX_INTR_MASKED_US    (2000)      // 2 ms
 #define USJ_FLUSH_POLL_STEP_US          (100)       // delay between no-progress polls
@@ -84,7 +83,7 @@ typedef struct {
 static uint32_t usj_write_fifo(usj_ctx_t *ctx, esp_trace_rb_t *rb)
 {
     if (!usb_serial_jtag_ll_txfifo_writable()) {
-        /* FIFO is full, no blocking */
+        /* Previous packet is not sent yet */
         return 0;
     }
 
@@ -97,17 +96,21 @@ static uint32_t usj_write_fifo(usj_ctx_t *ctx, esp_trace_rb_t *rb)
     uint32_t written = usb_serial_jtag_ll_write_txfifo(ptr, to_send);
     esp_trace_rb_consume(rb, written);
 
-    ctx->tx_state = usb_serial_jtag_ll_txfifo_writable() ? USJ_TX_SHORT_PENDING : USJ_TX_ZLP_PENDING;
+    /* Checked before wr_done, which also clears the writable flag */
+    ctx->tx_state = usb_serial_jtag_ll_txfifo_writable() ? USJ_TX_IDLE : USJ_TX_ZLP_PENDING;
+
+    /* Send the packet. A no-op if the HW already flushed a full FIFO. */
+    usb_serial_jtag_ll_txfifo_flush();
 
     return written;
 }
 
-static uint32_t usj_fill_txfifo(usj_ctx_t *ctx, bool commit_short)
+static uint32_t usj_fill_txfifo(usj_ctx_t *ctx)
 {
     esp_trace_rb_t *rb = &ctx->tx_ring;
     uint32_t total_written = 0;
 
-    while (esp_trace_rb_data_len(rb) > 0 && usb_serial_jtag_ll_txfifo_writable()) {
+    while (esp_trace_rb_data_len(rb) > 0) {
         uint32_t written = usj_write_fifo(ctx, rb);
         if (written == 0) {
             break;
@@ -115,11 +118,6 @@ static uint32_t usj_fill_txfifo(usj_ctx_t *ctx, bool commit_short)
         total_written += written;
     }
 
-    if (commit_short && ctx->tx_state == USJ_TX_SHORT_PENDING) {
-        usb_serial_jtag_ll_txfifo_flush();
-        ctx->tx_state = USJ_TX_IDLE;
-    }
-
     return total_written;
 }
 
@@ -127,7 +125,15 @@ static void usj_read_rx_fifo(usj_ctx_t *ctx)
 {
     uint8_t tmp[USJ_HW_FIFO_SIZE];
     while (usb_serial_jtag_ll_rxfifo_data_available()) {
-        uint32_t n = usb_serial_jtag_ll_read_rxfifo(tmp, sizeof(tmp));
+        /* Read only what fits, the rest stays in the HW FIFO */
+        uint32_t space = esp_trace_rb_free_len(&ctx->rx_ring);
+        if (space == 0) {
+            break;
+        }
+        if (space > sizeof(tmp)) {
+            space = sizeof(tmp);
+        }
+        uint32_t n = usb_serial_jtag_ll_read_rxfifo(tmp, space);
         if (n == 0) {
             break;
         }
@@ -185,22 +191,23 @@ static esp_err_t usj_init(esp_trace_transport_t *tp, const void *tp_cfg)
         /* Initialize TX ring buffer */
         esp_err_t ret = esp_trace_rb_init(&ctx->tx_ring, CONFIG_ESP_TRACE_USJ_TX_BUFFER_SIZE);
         if (ret != ESP_OK) {
-            ESP_LOGE(TAG, "Failed to initialize TX ring buffer");
+            ESP_EARLY_LOGE(TAG, "Failed to initialize TX ring buffer");
             goto err_ctx;
         }
 
         /* Initialize RX ring buffer to capture host commands */
         ret = esp_trace_rb_init(&ctx->rx_ring, USJ_RX_BUFFER_SIZE);
         if (ret != ESP_OK) {
-            ESP_LOGE(TAG, "Failed to initialize RX ring buffer");
+            ESP_EARLY_LOGE(TAG, "Failed to initialize RX ring buffer");
             goto err_tx_ring;
         }
 
-#if ESP_ROM_HAS_ETS_PRINTF_BUG
         /* Make sure no printf output is sent to USB-Serial-JTAG */
+#if ESP_ROM_HAS_ETS_PRINTF_BUG
         extern bool g_usb_print;
         g_usb_print = false;
 #endif
+        esp_rom_install_channel_putc(2, NULL);
 
     }
 
@@ -267,13 +274,15 @@ static esp_err_t usj_write(esp_trace_transport_t *tp, const void *data, size_t s
     /* Read any new RX data into the RX ring buffer to avoid losing host commands in case of heavy trace output */
     usj_read_rx_fifo(ctx);
 
-    /* Add data to TX ring buffer */
-    esp_trace_rb_put(rb, (const uint8_t *)data, size);
+    esp_err_t ret = esp_trace_rb_put(rb, (const uint8_t *)data, size);
+    if (ret != ESP_OK) {
+        /* Free what the HW can take, then retry before dropping the record */
+        usj_fill_txfifo(ctx);
+        ret = esp_trace_rb_put(rb, (const uint8_t *)data, size);
+    }
+    usj_fill_txfifo(ctx);
 
-    /* Try to move data to HW FIFO immediately, without forcing a short packet. */
-    usj_fill_txfifo(ctx, false);
-
-    return ESP_OK;
+    return ret;
 }
 
 static esp_err_t usj_down_buffer_config(esp_trace_transport_t *tp, uint8_t *buf, uint32_t size)
@@ -292,7 +301,7 @@ static esp_err_t usj_flush_with_timeout(usj_ctx_t *ctx, uint32_t tmo_us)
     esp_trace_rb_t *rb = &ctx->tx_ring;
 
     uint32_t pending = esp_trace_rb_data_len(rb);
-    if (pending < ctx->flush_thresh && ctx->tx_state == USJ_TX_IDLE) {
+    if ((pending == 0 || pending < ctx->flush_thresh) && ctx->tx_state == USJ_TX_IDLE) {
         return ESP_OK;
     }
 
@@ -300,9 +309,11 @@ static esp_err_t usj_flush_with_timeout(usj_ctx_t *ctx, uint32_t tmo_us)
     esp_trace_tmo_init(&timeout, tmo_us);
 
     while (esp_trace_rb_data_len(rb) > 0 || ctx->tx_state != USJ_TX_IDLE) {
-        uint32_t written = usj_fill_txfifo(ctx, true);
+        uint32_t written = usj_fill_txfifo(ctx);
 
-        if (ctx->tx_state == USJ_TX_ZLP_PENDING && usb_serial_jtag_ll_txfifo_writable()) {
+        /* Ring is empty: send a ZLP if the last packet filled the endpoint */
+        if (esp_trace_rb_data_len(rb) == 0 && ctx->tx_state == USJ_TX_ZLP_PENDING
+                && usb_serial_jtag_ll_txfifo_writable()) {
             usb_serial_jtag_ll_txfifo_flush();
             ctx->tx_state = USJ_TX_IDLE;
             continue;
@@ -363,7 +374,7 @@ static esp_err_t usj_set_config(esp_trace_transport_t *tp, esp_trace_transport_c
         ctx->flush_thresh = *(const uint32_t *)value;
         return ESP_OK;
     default:
-        ESP_LOGE(TAG, "Key %d is not supported", key);
+        ESP_EARLY_LOGE(TAG, "Key %d is not supported", key);
         return ESP_ERR_NOT_SUPPORTED;
     }
 }
@@ -387,7 +398,7 @@ static esp_err_t usj_get_config(esp_trace_transport_t *tp, esp_trace_transport_c
         *(uint32_t *)value = ctx->flush_thresh;
         return ESP_OK;
     default:
-        ESP_LOGE(TAG, "Key %d is not supported", key);
+        ESP_EARLY_LOGE(TAG, "Key %d is not supported", key);
         return ESP_ERR_NOT_SUPPORTED;
     }
 }

components/esp_trace/include/esp_trace_util.h

@@ -157,12 +157,22 @@ static inline uint32_t esp_trace_rb_data_len(const esp_trace_rb_t *rb)
 }
 
 /**
- * @brief Write data into the ring buffer (overwrites oldest data if full)
+ * @brief Get number of bytes that can still be written to the ring buffer
+ */
+static inline uint32_t esp_trace_rb_free_len(const esp_trace_rb_t *rb)
+{
+    return rb->max_size - rb->count;
+}
+
+/**
+ * @brief Write data into the ring buffer, all of it or none
+ *
+ * Data already in the buffer is never overwritten.
  *
  * @param rb    Ring buffer
  * @param data  Source data
  * @param len   Number of bytes to write
- * @return ESP_OK always (data is always accepted; oldest data may be dropped)
+ * @return ESP_OK on success, ESP_ERR_NO_MEM if the data does not fit
  */
 esp_err_t esp_trace_rb_put(esp_trace_rb_t *rb, const uint8_t *data, uint32_t len);
 

components/esp_trace/src/ports/port_utils.c

@@ -195,10 +195,10 @@ esp_err_t esp_trace_rb_init(esp_trace_rb_t *rb, uint32_t size)
 
 esp_err_t esp_trace_rb_put(esp_trace_rb_t *rb, const uint8_t *data, uint32_t len)
 {
-    /* Drop oldest data if needed to make room */
-    uint32_t free_len = rb->max_size - rb->count;
-    if (len > free_len) {
-        rb_advance_tail(rb, len - free_len);
+    /* Drop the new record instead of overwriting old ones, so that the records
+     * in the buffer stay complete */
+    if (len > rb->max_size - rb->count) {
+        return ESP_ERR_NO_MEM;
     }
 
     uint32_t head = rb->head;

conftest.py

@@ -272,6 +272,14 @@ class OpenOCD:
         resp += self.telnet.read_until(b'>')
         return to_str(resp)
 
+    def consume_output(self, duration: float) -> None:
+        if self.telnet is None:
+            return
+        end = time.time() + duration
+        while time.time() < end:
+            self.telnet.read_very_eager()
+            time.sleep(0.05)
+
     def apptrace_wait_stop(self, timeout: int = 30) -> None:
         stopped = False
         end_before = time.time() + timeout

docs/en/api-guides/tracing/custom-trace-library.rst

@@ -69,4 +69,4 @@ To capture FreeRTOS events, the external component implementing a trace encoder
 Application Example
 -------------------
 
-- :example:`system/esp_trace_custom_library` is a minimal template that wires up an external encoder, demonstrates the FreeRTOS trace-hook include chain, and shows cross-core serialization through the encoder lock.
+- :example:`system/tracing/esp_trace_custom_library` is a minimal template that wires up an external encoder, demonstrates the FreeRTOS trace-hook include chain, and shows cross-core serialization through the encoder lock.

docs/en/api-guides/tracing/gcov.rst

@@ -23,4 +23,4 @@ Coverage data can be dumped either at a hard-coded point in your application (ov
 Application Example
 -------------------
 
-- :example:`system/gcov` demonstrates how to add code coverage to a project and collect coverage data over JTAG.
+- :example:`system/tracing/gcov` demonstrates how to add code coverage to a project and collect coverage data over JTAG.

docs/en/api-guides/tracing/index.rst

@@ -101,8 +101,8 @@ Related Documentation
 Examples
 --------
 
-- :example:`system/app_trace_basic`: Basic application tracing
-- :example:`system/sysview_tracing`: SystemView tracing example
-- :example:`system/sysview_tracing_heap_log`: Heap tracing with SystemView
-- :example:`system/gcov`: Source code coverage over JTAG
-- :example:`system/esp_trace_custom_library`: External trace library integration template
+- :example:`system/tracing/app_trace_basic`: Basic application tracing
+- :example:`system/tracing/sysview_tracing`: SystemView tracing example
+- :example:`system/tracing/sysview_tracing_heap_log`: Heap tracing with SystemView
+- :example:`system/tracing/gcov`: Source code coverage over JTAG
+- :example:`system/tracing/esp_trace_custom_library`: External trace library integration template

docs/en/api-guides/tracing/sysview.rst

@@ -136,5 +136,5 @@ Good instructions on how to install, configure, and visualize data in Impulse fr
 Application Examples
 --------------------
 
-- :example:`system/sysview_tracing` demonstrates how to trace FreeRTOS task and system events using SEGGER SystemView.
-- :example:`system/sysview_tracing_heap_log` demonstrates heap allocation tracing alongside SystemView events.
+- :example:`system/tracing/sysview_tracing` demonstrates how to trace FreeRTOS task and system events using SEGGER SystemView.
+- :example:`system/tracing/sysview_tracing_heap_log` demonstrates heap allocation tracing alongside SystemView events.

docs/en/api-guides/tracing/transports.rst

@@ -396,8 +396,8 @@ Optional arguments:
 Application Examples
 --------------------
 
-- :example:`system/app_trace_basic` demonstrates how to use the Application Level Tracing Library to log messages to a host via JTAG, providing a faster alternative to UART logs.
-- :example:`system/app_trace_to_plot` demonstrates how to send and plot dummy sensor data to a host via JTAG.
+- :example:`system/tracing/app_trace_basic` demonstrates how to use the Application Level Tracing Library to log messages to a host via JTAG, providing a faster alternative to UART logs.
+- :example:`system/tracing/app_trace_to_plot` demonstrates how to send and plot dummy sensor data to a host via JTAG.
 
 API Reference
 -------------

docs/en/api-reference/system/app_trace.rst

@@ -17,9 +17,9 @@ Developers can use this library to send application specific state of execution
 Application Examples
 --------------------
 
-- :example:`system/app_trace_to_plot` demonstrates how to use the Application Level Tracing Library to send and plot dummy sensor data to a host via JTAG, providing a faster alternative to logging via UART.
+- :example:`system/tracing/app_trace_to_plot` demonstrates how to use the Application Level Tracing Library to send and plot dummy sensor data to a host via JTAG, providing a faster alternative to logging via UART.
 
-- :example:`system/app_trace_basic` demonstrates how to use the Application Level Tracing Library to log messages to a host via JTAG, providing a faster alternative to UART logs.
+- :example:`system/tracing/app_trace_basic` demonstrates how to use the Application Level Tracing Library to log messages to a host via JTAG, providing a faster alternative to UART logs.
 
 API Reference
 -------------

docs/en/api-reference/system/esp_trace.rst

@@ -13,7 +13,7 @@ For a conceptual overview, architecture, and usage guides, see :doc:`/api-guides
 Application Examples
 --------------------
 
-- :example:`system/esp_trace_custom_library` demonstrates how to integrate an external trace library (encoder) with the ``esp_trace`` core.
+- :example:`system/tracing/esp_trace_custom_library` demonstrates how to integrate an external trace library (encoder) with the ``esp_trace`` core.
 
 API Reference
 -------------

docs/en/api-reference/system/heap_debug.rst

@@ -653,15 +653,15 @@ The output from the heap trace has a similar format to the following example:
   Stop parsing trace. (Timeout 0.000000 sec while reading 1 bytes!)
   Process events from '['/tmp/heap.svdat']'...
   [0.002244575] HEAP: Allocated 1 bytes @ 0x3ffaffd8 from task "alloc" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:47
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:47
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.002258425] HEAP: Allocated 2 bytes @ 0x3ffaffe0 from task "alloc" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:48
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:48
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.002563725] HEAP: Freed bytes @ 0x3ffaffe0 from task "free" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:31 (discriminator 9)
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:31 (discriminator 9)
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.002782950] HEAP: Freed bytes @ 0x3ffb40b8 from task "main" on core 0 by:
@@ -673,39 +673,39 @@ The output from the heap trace has a similar format to the following example:
   /home/user/projects/esp/esp-idf/components/freertos/tasks.c:4590
 
   [0.102436025] HEAP: Allocated 2 bytes @ 0x3ffaffe0 from task "alloc" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:47
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:47
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.102449800] HEAP: Allocated 4 bytes @ 0x3ffaffe8 from task "alloc" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:48
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:48
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.102666150] HEAP: Freed bytes @ 0x3ffaffe8 from task "free" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:31 (discriminator 9)
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:31 (discriminator 9)
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.202436200] HEAP: Allocated 3 bytes @ 0x3ffaffe8 from task "alloc" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:47
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:47
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.202451725] HEAP: Allocated 6 bytes @ 0x3ffafff0 from task "alloc" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:48
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:48
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.202667075] HEAP: Freed bytes @ 0x3ffafff0 from task "free" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:31 (discriminator 9)
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:31 (discriminator 9)
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.302436000] HEAP: Allocated 4 bytes @ 0x3ffafff0 from task "alloc" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:47
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:47
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.302451475] HEAP: Allocated 8 bytes @ 0x3ffb40b8 from task "alloc" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:48
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:48
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.302667500] HEAP: Freed bytes @ 0x3ffb40b8 from task "free" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:31 (discriminator 9)
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:31 (discriminator 9)
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   Processing completed.
@@ -717,19 +717,19 @@ The output from the heap trace has a similar format to the following example:
   Processed 14 heap events.
 
   [0.002244575] HEAP: Allocated 1 bytes @ 0x3ffaffd8 from task "alloc" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:47
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:47
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.102436025] HEAP: Allocated 2 bytes @ 0x3ffaffe0 from task "alloc" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:47
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:47
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.202436200] HEAP: Allocated 3 bytes @ 0x3ffaffe8 from task "alloc" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:47
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:47
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.302436000] HEAP: Allocated 4 bytes @ 0x3ffafff0 from task "alloc" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:47
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:47
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   Found 10 leaked bytes in 4 blocks.

docs/zh_CN/api-guides/tracing/custom-trace-library.rst

@@ -69,4 +69,4 @@ FreeRTOS 跟踪钩子
 应用示例
 --------
 
-- :example:`system/esp_trace_custom_library` 是一个最简模板，演示如何接入外部编码器、说明 FreeRTOS 跟踪钩子头文件的包含链，以及通过编码器锁实现多核序列化。
+- :example:`system/tracing/esp_trace_custom_library` 是一个最简模板，演示如何接入外部编码器、说明 FreeRTOS 跟踪钩子头文件的包含链，以及通过编码器锁实现多核序列化。

docs/zh_CN/api-guides/tracing/gcov.rst

@@ -23,4 +23,4 @@ Gcov 使用跟踪基础设施进行主机数据传输，但尚未完全遵循 :d
 应用示例
 --------
 
-- :example:`system/gcov` 演示如何为项目添加代码覆盖率，并通过 JTAG 收集覆盖率数据。
+- :example:`system/tracing/gcov` 演示如何为项目添加代码覆盖率，并通过 JTAG 收集覆盖率数据。

docs/zh_CN/api-guides/tracing/index.rst

@@ -101,8 +101,8 @@ ESP-IDF 提供了一套跟踪系统，用于程序行为分析和调试。以较
 示例
 ----
 
-- :example:`system/app_trace_basic`：基础应用程序跟踪
-- :example:`system/sysview_tracing`：SystemView 跟踪示例
-- :example:`system/sysview_tracing_heap_log`：基于 SystemView 的堆跟踪
-- :example:`system/gcov`：通过 JTAG 获取源代码覆盖率
-- :example:`system/esp_trace_custom_library`：外部跟踪库集成模板
+- :example:`system/tracing/app_trace_basic`：基础应用程序跟踪
+- :example:`system/tracing/sysview_tracing`：SystemView 跟踪示例
+- :example:`system/tracing/sysview_tracing_heap_log`：基于 SystemView 的堆跟踪
+- :example:`system/tracing/gcov`：通过 JTAG 获取源代码覆盖率
+- :example:`system/tracing/esp_trace_custom_library`：外部跟踪库集成模板

docs/zh_CN/api-guides/tracing/sysview.rst

@@ -136,5 +136,5 @@ Start 子命令语法：
 应用示例
 --------
 
-- :example:`system/sysview_tracing` 演示如何使用 SEGGER SystemView 记录 FreeRTOS 任务与系统事件。
-- :example:`system/sysview_tracing_heap_log` 演示如何在记录 SystemView 事件的同时，对堆内存分配进行跟踪。
+- :example:`system/tracing/sysview_tracing` 演示如何使用 SEGGER SystemView 记录 FreeRTOS 任务与系统事件。
+- :example:`system/tracing/sysview_tracing_heap_log` 演示如何在记录 SystemView 事件的同时，对堆内存分配进行跟踪。

docs/zh_CN/api-guides/tracing/transports.rst

@@ -396,8 +396,8 @@ Log Trace Processor 命令选项
 应用示例
 --------
 
-- :example:`system/app_trace_basic` 演示如何使用应用层跟踪库通过 JTAG 将日志消息记录到主机，作为 UART 日志的更快替代方案。
-- :example:`system/app_trace_to_plot` 演示如何通过 JTAG 向主机发送并绘制虚拟传感器数据。
+- :example:`system/tracing/app_trace_basic` 演示如何使用应用层跟踪库通过 JTAG 将日志消息记录到主机，作为 UART 日志的更快替代方案。
+- :example:`system/tracing/app_trace_to_plot` 演示如何通过 JTAG 向主机发送并绘制虚拟传感器数据。
 
 API 参考
 --------

docs/zh_CN/api-reference/system/app_trace.rst

@@ -17,9 +17,9 @@ ESP-IDF 支持用于程序行为分析的 **应用级追踪** 功能。在 menuc
 应用示例
 ---------------
 
-- :example:`system/app_trace_to_plot` 演示了如何使用应用层跟踪库通过 JTAG 发送并绘制虚拟传感器数据到主机上，提供了比通过 UART 记录更快的替代方案。
+- :example:`system/tracing/app_trace_to_plot` 演示了如何使用应用层跟踪库通过 JTAG 发送并绘制虚拟传感器数据到主机上，提供了比通过 UART 记录更快的替代方案。
 
-- :example:`system/app_trace_basic` 演示了如何使用应用层跟踪库通过 JTAG 向主机记录消息，提供了比 UART 记录更快的替代方案。
+- :example:`system/tracing/app_trace_basic` 演示了如何使用应用层跟踪库通过 JTAG 向主机记录消息，提供了比 UART 记录更快的替代方案。
 
 API 参考
 -------------

docs/zh_CN/api-reference/system/esp_trace.rst

@@ -13,7 +13,7 @@ ESP Trace
 应用示例
 --------
 
-- :example:`system/esp_trace_custom_library` 演示如何将外部跟踪库（编码器）与 ``esp_trace`` 核心集成。
+- :example:`system/tracing/esp_trace_custom_library` 演示如何将外部跟踪库（编码器）与 ``esp_trace`` 核心集成。
 
 API 参考
 --------

docs/zh_CN/api-reference/system/heap_debug.rst

@@ -653,15 +653,15 @@ ESP-IDF 集成了用于请求 :ref:`堆内存信息 <heap-information>`、:ref:`
   Stop parsing trace. (Timeout 0.000000 sec while reading 1 byte!)
   Process events from '['/tmp/heap.svdat']'...
   [0.002244575] HEAP: Allocated 1 byte @ 0x3ffaffd8 from task "alloc" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:47
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:47
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.002258425] HEAP: Allocated 2 bytes @ 0x3ffaffe0 from task "alloc" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:48
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:48
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.002563725] HEAP: Freed bytes @ 0x3ffaffe0 from the task "free" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:31 (discriminator 9)
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:31 (discriminator 9)
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.002782950] HEAP: Freed bytes @ 0x3ffb40b8 from the task "main" on core 0 by:
@@ -673,39 +673,39 @@ ESP-IDF 集成了用于请求 :ref:`堆内存信息 <heap-information>`、:ref:`
   /home/user/projects/esp/esp-idf/components/freertos/tasks.c:4590
 
   [0.102436025] HEAP: Allocated 2 bytes @ 0x3ffaffe0 from the task "alloc" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:47
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:47
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.102449800] HEAP: Allocated 4 bytes @ 0x3ffaffe8 from the task "alloc" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:48
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:48
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.102666150] HEAP: Freed bytes @ 0x3ffaffe8 from the task "free" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:31 (discriminator 9)
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:31 (discriminator 9)
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.202436200] HEAP: Allocated 3 bytes @ 0x3ffaffe8 from the task "alloc" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:47
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:47
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.202451725] HEAP: Allocated 6 bytes @ 0x3ffafff0 from the task "alloc" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:48
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:48
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.202667075] HEAP: Freed bytes @ 0x3ffafff0 from the task "free" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:31 (discriminator 9)
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:31 (discriminator 9)
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.302436000] HEAP: Allocated 4 bytes @ 0x3ffafff0 from the task "alloc" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:47
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:47
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.302451475] HEAP: Allocated 8 bytes @ 0x3ffb40b8 from the task "alloc" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:48
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:48
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.302667500] HEAP: Freed bytes @ 0x3ffb40b8 from the task "free" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:31 (discriminator 9)
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:31 (discriminator 9)
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   Processing completed.
@@ -717,19 +717,19 @@ ESP-IDF 集成了用于请求 :ref:`堆内存信息 <heap-information>`、:ref:`
   Processed 14 heap events.
 
   [0.002244575] HEAP: Allocated 1 bytes @ 0x3ffaffd8 from the task "alloc" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:47
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:47
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.102436025] HEAP: Allocated 2 bytes @ 0x3ffaffe0 from the task "alloc" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:47
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:47
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.202436200] HEAP: Allocated 3 bytes @ 0x3ffaffe8 from the task "alloc" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:47
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:47
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   [0.302436000] HEAP: Allocated 4 bytes @ 0x3ffafff0 from the task "alloc" on core 0 by:
-  /home/user/projects/esp/esp-idf/examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c:47
+  /home/user/projects/esp/esp-idf/examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c:47
   /home/user/projects/esp/esp-idf/components/freertos/port.c:355 (discriminator 1)
 
   Found 10 leaked bytes in 4 blocks.

examples/system/.build-test-rules.yml

@@ -1,17 +1,5 @@
 # Documentation: .gitlab/ci/README.md#manifest-file-to-control-the-buildtest-apps
 
-examples/system/app_trace_basic:
-  disable_test:
-    - if: IDF_TARGET == "esp32h21"
-      temporary: true
-      reason: not supported yet #TODO: OCD-1081
-    - if: IDF_TARGET == "esp32h4"
-      temporary: true
-      reason: not supported yet #TODO: OCD-1137
-  depends_components:
-    - esp_trace
-    - app_trace
-
 examples/system/base_mac_address:
   depends_components:
     - *common_components
@@ -68,21 +56,6 @@ examples/system/esp_timer:
     - *common_components
     - esp_timer
 
-examples/system/esp_trace_custom_library:
-  disable:
-    - if: SOC_USB_SERIAL_JTAG_SUPPORTED != 1
-      reason: example transport is USB Serial JTAG
-  disable_test:
-    - if: IDF_TARGET == "esp32h21"
-      temporary: true
-      reason: lack of runners
-    - if: IDF_TARGET == "esp32h4"
-      temporary: true
-      reason: lack of runners
-  depends_components:
-    - esp_trace
-    - freertos
-
 examples/system/eventfd:
   disable:
     - if: SOC_GPTIMER_SUPPORTED != 1 and (IDF_TARGET != "esp32" and (NIGHTLY_RUN != "1" or IDF_TARGET == "linux"))
@@ -116,21 +89,6 @@ examples/system/freertos/real_time_stats:
     - *common_components
     - freertos
 
-examples/system/gcov:
-  disable_test:
-    - if: IDF_TARGET == "esp32h21"
-      temporary: true
-      reason: not supported yet #TODO: OCD-1079
-    - if: IDF_TARGET == "esp32h4"
-      temporary: true
-      reason: not supported yet #TODO: OCD-1138
-    - if: IDF_TARGET == "esp32p4"
-      temporary: true
-      reason: p4 rev3 migration # TODO: IDF-14440
-  depends_components:
-    - esp_trace
-    - app_trace
-
 examples/system/heap_task_tracking:
   disable:
     - if: IDF_TARGET != "esp32c3" and (NIGHTLY_RUN != "1" or IDF_TARGET == "linux")
@@ -299,34 +257,6 @@ examples/system/select:
     - *common_components
     - vfs
 
-examples/system/sysview_tracing:
-  disable:
-    - if: SOC_GPTIMER_SUPPORTED != 1
-  disable_test:
-    - if: IDF_TARGET == "esp32h21"
-      temporary: true
-      reason: not supported yet #TODO: OCD-1082
-    - if: IDF_TARGET == "esp32h4"
-      temporary: true
-      reason: not supported yet #TODO: OCD-1136
-  depends_components:
-    - esp_trace
-    - app_trace
-
-examples/system/sysview_tracing_heap_log:
-  disable:
-    - if: SOC_GPTIMER_SUPPORTED != 1
-  disable_test:
-    - if: IDF_TARGET == "esp32h21"
-      temporary: true
-      reason: not supported yet #TODO: OCD-1082
-    - if: IDF_TARGET == "esp32h4"
-      temporary: true
-      reason: not supported yet #TODO: OCD-1136
-  depends_components:
-    - esp_trace
-    - app_trace
-
 examples/system/task_watchdog:
   disable:
     - if: IDF_TARGET != "esp32" and (NIGHTLY_RUN != "1" or IDF_TARGET == "linux")

examples/system/gcov/main/gcov_example_func.c

@@ -1,8 +0,0 @@
-#include <stdio.h>
-
-
-void blink_dummy_func(void)
-{
-    static int i;
-    printf("blink_dummy_func: Counter = %d\n", i++);
-}

examples/system/tracing/.build-test-rules.yml

@@ -0,0 +1,71 @@
+# Documentation: .gitlab/ci/README.md#manifest-file-to-control-the-buildtest-apps
+
+examples/system/tracing/app_trace_basic:
+  disable_test:
+    - if: IDF_TARGET == "esp32h21"
+      temporary: true
+      reason: not supported yet #TODO: OCD-1081
+    - if: IDF_TARGET == "esp32h4"
+      temporary: true
+      reason: not supported yet #TODO: OCD-1137
+  depends_components:
+    - esp_trace
+    - app_trace
+
+examples/system/tracing/esp_trace_custom_library:
+  disable:
+    - if: SOC_USB_SERIAL_JTAG_SUPPORTED != 1
+      reason: example transport is USB Serial JTAG
+  disable_test:
+    - if: IDF_TARGET == "esp32h21"
+      temporary: true
+      reason: lack of runners
+    - if: IDF_TARGET == "esp32h4"
+      temporary: true
+      reason: lack of runners
+  depends_components:
+    - esp_trace
+    - freertos
+
+examples/system/tracing/gcov:
+  disable_test:
+    - if: IDF_TARGET == "esp32h21"
+      temporary: true
+      reason: not supported yet #TODO: OCD-1079
+    - if: IDF_TARGET == "esp32h4"
+      temporary: true
+      reason: not supported yet #TODO: OCD-1138
+    - if: IDF_TARGET == "esp32p4"
+      temporary: true
+      reason: p4 rev3 migration # TODO: IDF-14440
+  depends_components:
+    - esp_trace
+    - app_trace
+
+examples/system/tracing/sysview_tracing:
+  disable:
+    - if: SOC_GPTIMER_SUPPORTED != 1
+  disable_test:
+    - if: IDF_TARGET == "esp32h21"
+      temporary: true
+      reason: not supported yet #TODO: OCD-1082
+    - if: IDF_TARGET == "esp32h4"
+      temporary: true
+      reason: not supported yet #TODO: OCD-1136
+  depends_components:
+    - esp_trace
+    - app_trace
+
+examples/system/tracing/sysview_tracing_heap_log:
+  disable:
+    - if: SOC_GPTIMER_SUPPORTED != 1
+  disable_test:
+    - if: IDF_TARGET == "esp32h21"
+      temporary: true
+      reason: not supported yet #TODO: OCD-1082
+    - if: IDF_TARGET == "esp32h4"
+      temporary: true
+      reason: not supported yet #TODO: OCD-1136
+  depends_components:
+    - esp_trace
+    - app_trace

examples/system/tracing/app_trace_to_plot/README.md

@@ -23,7 +23,7 @@ This example will assume that an ESP-WROVER-KIT is used.
 
 1. Connect the JTAG interface to the target board. For details about how to set up JTAG interface, please see [JTAG Debugging](https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/jtag-debugging/index.html). Power up both the JTAG debugger and target board.
 
-2. To start the tcp socket server, you need to run `read_trace.py` tool under the `esp-idf/examples/system/app_trace_to_plot` path.
+2. To start the tcp socket server, you need to run `read_trace.py` tool under the `esp-idf/examples/system/tracing/app_trace_to_plot` path.
 
 3. After connecting JTAG interface and starting the tcp socket server, you need to [Run OpenOCD](https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/jtag-debugging/index.html#run-openocd).
 
@@ -46,7 +46,7 @@ idf.py -p PORT flash monitor
 
 (Replace PORT with the name of the serial port to use.)
 
-**Run Plotting Tool** To plot data and open TCP socket, there is a tool named `read_trace.py` under the `examples/system/app_trace_to_plot` path. Run this tool in the terminal session with configured IDF development environment by entering the command below. This command opens a TCP socket and plots the given data when OpenOCD triggered to start App Trace. If you are running tool at first time, you need to install dash with `pip install dash` in the same terminal session after running configuring IDF development environment.
+**Run Plotting Tool** To plot data and open TCP socket, there is a tool named `read_trace.py` under the `examples/system/tracing/app_trace_to_plot` path. Run this tool in the terminal session with configured IDF development environment by entering the command below. This command opens a TCP socket and plots the given data when OpenOCD triggered to start App Trace. If you are running tool at first time, you need to install dash with `pip install dash` in the same terminal session after running configuring IDF development environment.
 
 ```bash
 python read_trace.py --plot-config data.json --source tcp://localhost:53535 --output-file data.log

examples/system/tracing/app_trace_to_plot/data.json

@@ -1,7 +1,7 @@
 {
   "//data.json": "Apptrace plotting config file for 'read_trace.py'",
   "//Summary and usage": "This file is used for apptrace plotting. You can use this json file with '--plot-config' parameter of the 'read_trace.py' file is to configure graphs for visualizing sensor data",
-  "//More information": "To get more information about apptrace plotting and configuration file, please check 'app_trace_to_plot' example in '../examples/system' and 'read_trace.py' file",
+  "//More information": "To get more information about apptrace plotting and configuration file, please check 'app_trace_to_plot' example in '../examples/system/tracing' and 'read_trace.py' file",
   "Temperature sensors": {
     "data_streams" : {
       "Outside temperature": {
@@ -27,7 +27,7 @@
       }
     },
     "xaxis_title": "Timestamp",
-    "yaxis_title": "Temperature in Celcius"
+    "yaxis_title": "Temperature in Celsius"
   },
   "Altitude sensors": {
     "data_streams" : {

examples/system/tracing/esp_trace_custom_library/README.md

@@ -3,7 +3,7 @@
 
 # ESP Trace External Library Integration Example
 
-This example shows the **minimal** set of files and configuration needed to plug a third-party trace library into the [`esp_trace`](../../../components/esp_trace) component using the public `CONFIG_ESP_TRACE_LIB_EXTERNAL` extension point. It is meant as a copy-paste starting point for vendors and users who want to integrate their own trace recorder (e.g. Percepio TraceRecorder, a custom CTF emitter, a printf-style logger, …) without patching ESP-IDF itself.
+This example shows the **minimal** set of files and configuration needed to plug a third-party trace library into the [`esp_trace`](../../../../components/esp_trace) component using the public `CONFIG_ESP_TRACE_LIB_EXTERNAL` extension point. It is meant as a copy-paste starting point for vendors and users who want to integrate their own trace recorder (e.g. Percepio TraceRecorder, a custom CTF emitter, a printf-style logger, …) without patching ESP-IDF itself.
 
 The example covers:
 
@@ -94,7 +94,7 @@ esp_trace_custom_library/
 
 ### 2. Providing the FreeRTOS trace hooks
 
-`esp_trace`'s public header [`esp_trace_freertos.h`](../../../components/esp_trace/include/esp_trace_freertos.h) is included from `FreeRTOSConfig.h`. When `CONFIG_ESP_TRACE_LIB_EXTERNAL=y` is set, it pulls in **your** `esp_trace_freertos_impl.h`:
+`esp_trace`'s public header [`esp_trace_freertos.h`](../../../../components/esp_trace/include/esp_trace_freertos.h) is included from `FreeRTOSConfig.h`. When `CONFIG_ESP_TRACE_LIB_EXTERNAL=y` is set, it pulls in **your** `esp_trace_freertos_impl.h`:
 
 ```c
 #if CONFIG_ESP_TRACE_LIB_EXTERNAL
@@ -177,7 +177,7 @@ Because the transport is USB-Serial-JTAG and the console is on UART (`CONFIG_ESP
 
 ## Runtime Control — `esp_trace_start` / `_stop` / `_flush`
 
-[`esp_trace.h`](../../../components/esp_trace/include/esp_trace.h) exposes three generic lifecycle calls that dispatch to the active encoder's vtable. The application uses only the public API — it never reaches into the external library:
+[`esp_trace.h`](../../../../components/esp_trace/include/esp_trace.h) exposes three generic lifecycle calls that dispatch to the active encoder's vtable. The application uses only the public API — it never reaches into the external library:
 
 ```c
 esp_trace_start();    // resume emission (also resets the delta baseline)
@@ -194,7 +194,7 @@ In this example the library boots with `s_enabled = false`, so nothing is emitte
 
 ## Other `esp_trace` Helpers
 
-Beyond what this example uses, [`esp_trace.h`](../../../components/esp_trace/include/esp_trace.h) and [`esp_trace_util.h`](../../../components/esp_trace/include/esp_trace_util.h) also expose:
+Beyond what this example uses, [`esp_trace.h`](../../../../components/esp_trace/include/esp_trace.h) and [`esp_trace_util.h`](../../../../components/esp_trace/include/esp_trace_util.h) also expose:
 
 * `esp_trace_is_host_connected()` — gate expensive work when no host is listening.
 * `esp_trace_get_link_type()` — returns `ESP_TRACE_LINK_DEBUG_PROBE`, `_UART`, or `_USB_SERIAL_JTAG`.
@@ -203,5 +203,5 @@ Beyond what this example uses, [`esp_trace.h`](../../../components/esp_trace/inc
 
 ## See Also
 
-* [`components/esp_trace/README.md`](../../../components/esp_trace/README.md) — full architecture overview and adapter API reference.
+* [`components/esp_trace/README.md`](../../../../components/esp_trace/README.md) — full architecture overview and adapter API reference.
 * [`examples/system/sysview_tracing`](../sysview_tracing) — a production-grade integration of SEGGER SystemView built on the same extension points.

examples/system/tracing/esp_trace_custom_library/components/ext_trace_lib/include/trace_FreeRTOS.h

@@ -36,6 +36,9 @@ void init_trace_lib(esp_trace_encoder_t *enc);
 void trace_lib_start(void);
 void trace_lib_stop(void);
 
+/* @brief Get the number of trace lines written to and dropped by the transport */
+void trace_lib_get_stats(uint32_t *written, uint32_t *dropped);
+
 /* Hook implementations — defined in trace_FreeRTOS.c.
  * Kept void*-typed to avoid depending on FreeRTOS types in this header. */
 void trace_lib_task_switched_in(void);

examples/system/tracing/esp_trace_custom_library/components/ext_trace_lib/src/adapter_encoder_ext_trace_lib.c

@@ -85,14 +85,6 @@ static esp_err_t stop(esp_trace_encoder_t *enc)
     return ESP_OK;
 }
 
-static esp_err_t flush(esp_trace_encoder_t *enc)
-{
-    if (!enc || !enc->tp || !enc->tp->vt->flush_nolock) {
-        return ESP_ERR_NOT_SUPPORTED;
-    }
-    return enc->tp->vt->flush_nolock(enc->tp);
-}
-
 /**
  * @brief Panic handler
  *
@@ -104,7 +96,11 @@ static esp_err_t flush(esp_trace_encoder_t *enc)
 static void panic_handler(esp_trace_encoder_t *enc, const void *info)
 {
     (void)info;
-    flush(enc);
+
+    /* No lock here, the panicking core may already hold it */
+    if (enc && enc->tp && enc->tp->vt->flush_nolock) {
+        enc->tp->vt->flush_nolock(enc->tp);
+    }
 }
 
 static unsigned int take_lock(esp_trace_encoder_t *enc, uint32_t tmo_us)
@@ -127,6 +123,34 @@ static void give_lock(esp_trace_encoder_t *enc, unsigned int int_state)
     esp_trace_lock_give(&ctx->lock);
 }
 
+/* Total time for the flush, split over several flush_nolock() calls */
+#define EXT_TRACE_LIB_FLUSH_TMO_US  (1000000)
+
+static esp_err_t flush(esp_trace_encoder_t *enc)
+{
+    if (!enc || !enc->tp || !enc->tp->vt->flush_nolock) {
+        return ESP_ERR_NOT_SUPPORTED;
+    }
+
+    /* One call may be too short to send all the data, so repeat it and release
+     * the lock in between to keep interrupts enabled */
+    esp_trace_tmo_t tmo;
+    esp_trace_tmo_init(&tmo, EXT_TRACE_LIB_FLUSH_TMO_US);
+
+    esp_err_t err;
+    do {
+        unsigned int int_state = take_lock(enc, ESP_TRACE_TMO_INFINITE);
+        err = enc->tp->vt->flush_nolock(enc->tp);
+        give_lock(enc, int_state);
+
+        if (err != ESP_ERR_TIMEOUT) {
+            break;  /* done, or an error that repeating cannot fix */
+        }
+    } while (esp_trace_tmo_check(&tmo) == ESP_OK);
+
+    return err;
+}
+
 static const esp_trace_encoder_vtable_t s_ext_trace_lib_vt = {
     .init                  = init,
     .write                 = write,

examples/system/tracing/esp_trace_custom_library/components/ext_trace_lib/src/trace_FreeRTOS.c

@@ -35,6 +35,8 @@ static esp_trace_encoder_t *s_enc = NULL;
 static uint32_t s_ts_freq_hz = 1000000;   /* default assume 1 MHz */
 static uint32_t s_last_ts = 0;
 static volatile bool s_enabled = false;
+static uint32_t s_written = 0;
+static uint32_t s_dropped = 0;
 
 void init_trace_lib(esp_trace_encoder_t *enc)
 {
@@ -87,12 +89,26 @@ static void encode(const char *type, const char *detail)
         if (n >= (int)sizeof(line)) {
             n = (int)sizeof(line) - 1;
         }
-        esp_trace_write(s_esp_trace_handle, line, (size_t)n, 0);
+        if (esp_trace_write(s_esp_trace_handle, line, (size_t)n, 0) == ESP_OK) {
+            s_written++;
+        } else {
+            s_dropped++;  /* transport buffer was full, line dropped */
+        }
     }
 
     s_enc->vt->give_lock(s_enc, int_state);
 }
 
+void trace_lib_get_stats(uint32_t *written, uint32_t *dropped)
+{
+    if (written) {
+        *written = s_written;
+    }
+    if (dropped) {
+        *dropped = s_dropped;
+    }
+}
+
 void trace_lib_task_switched_in(void)
 {
     TaskHandle_t h = xTaskGetCurrentTaskHandle();

examples/system/tracing/esp_trace_custom_library/main/app_main.c

@@ -5,6 +5,7 @@
  */
 #include "sdkconfig.h"
 
+#include <inttypes.h>
 #include <stdio.h>
 #include <string.h>
 
@@ -13,6 +14,7 @@
 #include "freertos/queue.h"
 #include "esp_log.h"
 #include "esp_trace.h"
+#include "trace_FreeRTOS.h"
 
 static const char *TAG = "main";
 
@@ -70,7 +72,16 @@ void app_main(void)
     vTaskDelay(1000 / portTICK_PERIOD_MS);
 
     esp_trace_stop();
-    esp_trace_flush();
+    esp_err_t err = esp_trace_flush();
+
+    /* Logged from task context, so it goes to the console UART and not to the
+     * trace port. Shows whether the device sent the trace data or not. */
+    uint32_t written = 0;
+    uint32_t dropped = 0;
+    trace_lib_get_stats(&written, &dropped);
+    ESP_LOGI(TAG, "Trace flush: %s, host connected: %d, lines written: %" PRIu32 ", dropped: %" PRIu32,
+             esp_err_to_name(err), (int)esp_trace_is_host_connected(esp_trace_get_active_handle()),
+             written, dropped);
 
     ESP_LOGI(TAG, "End of trace session");
 }

examples/system/tracing/esp_trace_custom_library/pytest_esp_trace_custom_library.py

@@ -76,7 +76,6 @@ def _validate_trace_data(trace_log_path: str) -> None:
 
 def _capture_trace(ser: serial.Serial, trace_log_path: str, capture_s: float = 5.0) -> None:
     """Capture trace output from the USB-Serial-JTAG endpoint."""
-    ser.reset_input_buffer()
     with open(trace_log_path, 'w+b') as f:
         end_time = time.time() + capture_s
         while time.time() < end_time:
@@ -107,10 +106,13 @@ def _capture_trace(ser: serial.Serial, trace_log_path: str, capture_s: float = 5
 def test_esp_trace_ext_lib_usj(dut: IdfDut) -> None:
     dut.expect('Start of trace session', timeout=5)
 
-    time.sleep(1)  # wait for USJ port to be ready
+    # Open the port before the DUT starts tracing
     usj_port = '/dev/serial_ports/ttyACM-esp32'
-    ser = serial.Serial(usj_port, baudrate=1000000, timeout=10)
     trace_log_path = os.path.join(dut.logdir, 'ext_trace.log')
+    time.sleep(1)  # Wait for the USJ port to be ready
+    with serial.Serial(usj_port, baudrate=1000000, timeout=10) as ser:
+        # Discard data from before this test, the DUT is not tracing yet
+        ser.reset_input_buffer()
+        _capture_trace(ser, trace_log_path)
 
-    _capture_trace(ser, trace_log_path)
     _validate_trace_data(trace_log_path)

examples/system/tracing/esp_trace_custom_library/sdkconfig.defaults

@@ -3,4 +3,4 @@ CONFIG_ESP_TRACE_LIB_EXTERNAL=y
 CONFIG_ESP_TRACE_TS_SOURCE_ESP_TIMER=y
 CONFIG_ESP_CONSOLE_SECONDARY_NONE=y
 CONFIG_ESP_TRACE_TRANSPORT_USB_SERIAL_JTAG=y
-CONFIG_ESP_TRACE_USJ_TX_BUFFER_SIZE=32768
+CONFIG_ESP_TRACE_USJ_TX_BUFFER_SIZE=16384

examples/system/tracing/gcov/components/sample/some_funcs.c

@@ -1,3 +1,8 @@
+/*
+ * SPDX-FileCopyrightText: 2026 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Unlicense OR CC0-1.0
+ */
 #include <stdio.h>
 
 

examples/system/tracing/gcov/main/gcov_example_func.c

@@ -0,0 +1,13 @@
+/*
+ * SPDX-FileCopyrightText: 2026 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Unlicense OR CC0-1.0
+ */
+#include <stdio.h>
+
+
+void blink_dummy_func(void)
+{
+    static int i;
+    printf("blink_dummy_func: Counter = %d\n", i++);
+}

examples/system/tracing/gcov/main/gcov_example_main.c

@@ -1,11 +1,8 @@
-/* Blink Example with covergae info
-
-   This example code is in the Public Domain (or CC0 licensed, at your option.)
-
-   Unless required by applicable law or agreed to in writing, this
-   software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
-   CONDITIONS OF ANY KIND, either express or implied.
-*/
+/*
+ * SPDX-FileCopyrightText: 2026 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Unlicense OR CC0-1.0
+ */
 #include <stdio.h>
 #include "freertos/FreeRTOS.h"
 #include "freertos/task.h"

examples/system/tracing/sysview_tracing/main/sysview_tracing.c

@@ -1,11 +1,8 @@
-/* Application Trace to Host Example
-
-   This example code is in the Public Domain (or CC0 licensed, at your option.)
-
-   Unless required by applicable law or agreed to in writing, this
-   software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
-   CONDITIONS OF ANY KIND, either express or implied.
-*/
+/*
+ * SPDX-FileCopyrightText: 2026 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Unlicense OR CC0-1.0
+ */
 
 #include "esp_err.h"
 #include "sdkconfig.h"

examples/system/tracing/sysview_tracing/pytest_sysview_tracing.py

@@ -16,6 +16,24 @@ if typing.TYPE_CHECKING:
     from conftest import OpenOCD
 
 
+STOP_EVENT_ID = 0x0B  # SYSVIEW_EVTID_TRACE_STOP
+
+
+def _assert_has_stop_record(segment: bytes, label: str) -> None:
+    """Assert a SysView data segment ends with a TRACE_STOP record.
+
+    A STOP record is the STOP event ID followed by a variable-length timestamp
+    delta. Walk back over the trailing continuation bytes (0x80 bit set) to find
+    the event ID, since its offset is not fixed.
+    """
+    size = len(segment)
+    assert size >= 2, f'{label}: segment too small to contain STOP record'
+    i = size - 2
+    while i >= 0 and (segment[i] & 0x80):
+        i -= 1
+    assert i >= 0 and segment[i] == STOP_EVENT_ID, f'{label}: does not end with a TRACE_STOP record'
+
+
 def _validate_trace_data(trace_log: list[str], target: str, is_uart: bool = False) -> None:
     """Validate SysView trace data in log file(s).
 
@@ -24,23 +42,14 @@ def _validate_trace_data(trace_log: list[str], target: str, is_uart: bool = Fals
         target: Target chip name (e.g., 'esp32', 'esp32s3')
         is_uart: If True, also validate STOP record at end of file
     """
-    STOP_EVENT_ID = 0x0B  # SYSVIEW_EVTID_TRACE_STOP
-
     for idx, log in enumerate(trace_log):
         with open(log, 'rb') as f:
             content = f.read()
-            search_str = f'N=FreeRTOS Application,D={target},C=core{idx},O=FreeRTOS'.encode()
-            assert search_str in content, f'SysView trace data not found in {log}'
-            # The file must end with a TRACE_STOP record: the STOP event ID
-            # followed by a variable-length timestamp delta. Walk back
-            # over the trailing continuation bytes (0x80 bit set)
-            # to find the event ID, since its offset is not fixed.
-            size = len(content)
-            assert size >= 2, 'Trace file too small to contain STOP record'
-            i = size - 2
-            while i >= 0 and (content[i] & 0x80):
-                i -= 1
-            assert i >= 0 and content[i] == STOP_EVENT_ID, 'STOP record does not start with STOP eventID'
+        search_str = f'N=FreeRTOS Application,D={target},C=core{idx},O=FreeRTOS'.encode()
+        assert search_str in content, f'SysView trace data not found in {log}'
+        # Each core is captured to its own file; require each to end
+        # with its own TRACE_STOP record.
+        _assert_has_stop_record(content, f'core{idx}')
 
 
 def _capture_sysview_trace(ser: serial.Serial, trace_log_path: str) -> None:
@@ -125,8 +134,9 @@ def _test_sysview_tracing_jtag(openocd_dut: 'OpenOCD', dut: IdfDut) -> None:
         dut.expect('example: Created task')  # dut has been restarted by gdb since the last dut.expect()
         dut_expect_task_event()
 
-        # Do a sleep while sysview samples are captured.
-        time.sleep(3)
+        # Capture sysview samples and keep reading telnet so OpenOCD's blocking log writes don't stall its
+        # main loop and leave the 'stop' below unserviced.
+        openocd.consume_output(3)
         openocd.write('esp sysview stop')
         openocd.apptrace_wait_stop()
 
@@ -173,7 +183,7 @@ def test_sysview_tracing_uart(dut: IdfDut) -> None:
 def test_sysview_tracing_usj_serial(dut: IdfDut) -> None:
     time.sleep(1)  # wait for USJ port to be ready
     usj_port = '/dev/serial_ports/ttyACM-esp32'
-    ser = serial.Serial(usj_port, baudrate=1000000, timeout=10)
     trace_log = [os.path.join(dut.logdir, 'sys_log_usj.svdat')]  # pylint: disable=protected-access
-    _capture_sysview_trace(ser, trace_log[0])
-    _validate_trace_data(trace_log, dut.target, is_uart=True)
+    with serial.Serial(usj_port, baudrate=1000000, timeout=10) as ser:
+        _capture_sysview_trace(ser, trace_log[0])
+        _validate_trace_data(trace_log, dut.target, is_uart=True)

examples/system/tracing/sysview_tracing/sdkconfig.ci.sysview_usj

@@ -1,3 +1,4 @@
 CONFIG_ESP_CONSOLE_SECONDARY_NONE=y
 CONFIG_ESP_TRACE_TRANSPORT_USB_SERIAL_JTAG=y
 CONFIG_USE_CUSTOM_EVENT_ID=y
+CONFIG_ESP_TRACE_USJ_TX_BUFFER_SIZE=16384

examples/system/tracing/sysview_tracing_heap_log/main/sysview_heap_log.c

@@ -1,11 +1,8 @@
-/* Application Trace to Host Example
-
-   This example code is in the Public Domain (or CC0 licensed, at your option.)
-
-   Unless required by applicable law or agreed to in writing, this
-   software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
-   CONDITIONS OF ANY KIND, either express or implied.
-*/
+/*
+ * SPDX-FileCopyrightText: 2026 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Unlicense OR CC0-1.0
+ */
 
 #include "sdkconfig.h"
 #include <inttypes.h>

tools/ci/check_copyright_ignore.txt

@@ -845,9 +845,6 @@ examples/system/esp_event/user_event_loops/main/main.c
 examples/system/esp_timer/main/esp_timer_example_main.c
 examples/system/eventfd/main/eventfd_example.c
 examples/system/freertos/real_time_stats/main/real_time_stats_example_main.c
-examples/system/gcov/components/sample/some_funcs.c
-examples/system/gcov/main/gcov_example_func.c
-examples/system/gcov/main/gcov_example_main.c
 examples/system/gdbstub/main/gdbstub_main.c
 examples/system/himem/main/himem_example_main.c
 examples/system/ota/advanced_https_ota/main/advanced_https_ota_example.c
@@ -858,8 +855,6 @@ examples/system/ota/simple_ota_example/main/simple_ota_example.c
 examples/system/perfmon/main/perfmon_example_main.c
 examples/system/select/main/select_example.c
 examples/system/startup_time/main/hello_world_main.c
-examples/system/sysview_tracing/main/sysview_tracing.c
-examples/system/sysview_tracing_heap_log/main/sysview_heap_log.c
 examples/system/task_watchdog/main/task_watchdog_example_main.c
 examples/system/unit_test/components/testable/include/testable.h
 examples/system/unit_test/components/testable/mean.c

tools/ci/executable-list.txt

@@ -42,10 +42,10 @@ examples/build_system/cmake/idf_as_lib/run.sh
 examples/common_components/protocol_examples_tapif_io/make_tap_netif
 examples/storage/parttool/parttool_example.py
 examples/storage/parttool/parttool_example.sh
-examples/system/app_trace_to_plot/read_trace.py
 examples/system/ota/otatool/get_running_partition.py
 examples/system/ota/otatool/otatool_example.py
 examples/system/ota/otatool/otatool_example.sh
+examples/system/tracing/app_trace_to_plot/read_trace.py
 install.fish
 install.sh
 tools/activate.py

tools/esp_app_trace/test/sysview/README.md

@@ -5,7 +5,7 @@
     Build example `sysview_tracing_heap_log` project.
 
     ```
-    cd $IDF_PATH/examples/system/sysview_tracing_heap_log
+    cd $IDF_PATH/examples/system/tracing/sysview_tracing_heap_log
     idf.py set target esp32
     idf.py build
     cp build/sysview_tracing_heap_log.elf $IDF_PATH/tools/esp_app_trace/test/sysview/
@@ -18,12 +18,12 @@
     Flash the example and run OpenOCD and GDB using the following command in a separate console
 
     ```
-    cd $IDF_PATH/examples/system/sysview_tracing_heap_log
+    cd $IDF_PATH/examples/system/tracing/sysview_tracing_heap_log
     idf.py openocd
     ```
 
     ```
-    cd $IDF_PATH/examples/system/sysview_tracing_heap_log
+    cd $IDF_PATH/examples/system/tracing/sysview_tracing_heap_log
     xtensa-esp32-elf-gdb -x $IDF_PATH/tools/esp_app_trace/test/sysview/gdbinit build/sysview_tracing_heap_log.elf
     ```
     When program stops at `heap_trace_stop`  quit GDB and OpenOCD
@@ -39,12 +39,12 @@
     Flash the example and run OpenOCD and GDB using the following command in a separate console
 
     ```
-    cd $IDF_PATH/examples/system/sysview_tracing_heap_log
+    cd $IDF_PATH/examples/system/tracing/sysview_tracing_heap_log
     idf.py openocd
     ```
 
     ```
-    cd $IDF_PATH/examples/system/sysview_tracing_heap_log
+    cd $IDF_PATH/examples/system/tracing/sysview_tracing_heap_log
     xtensa-esp32-elf-gdb -x $IDF_PATH/tools/esp_app_trace/test/sysview/gdbinit-mcore build/sysview_tracing_heap_log.elf
     ```
     When program stops at `heap_trace_stop`  quit GDB and OpenOCD