fix(nimble): Fix for clang compilation issues

examples/bluetooth/nimble/ble_cte/ble_periodic_adv_with_cte/main/main.c

@@ -19,6 +19,11 @@
 static const char *TAG = "CTE_ADV_EXAMPLE";
 static uint8_t s_periodic_adv_raw_data[] = {0x0D, 0x09, 'C','T','E',' ','P','e','r','i','o','d','i','c'};
 
+#if !(MYNEWT_VAL(BLE_EXT_ADV) && MYNEWT_VAL(BLE_PERIODIC_ADV) && MYNEWT_VAL(BLE_AOA_AOD))
+#error "This example requires NimBLE Extended Advertising, Periodic Advertising, and CTE (AoA/AoD). " \
+       "Use a supported target from README.md (e.g. esp32h2, esp32c5, esp32c61) and run idf.py set-target before build."
+#endif
+
 /**
  * @brief Configure and start periodic advertising with CTE
  */

examples/bluetooth/nimble/ble_cte/ble_periodic_adv_with_cte/sdkconfig.defaults

@@ -1,7 +1,11 @@
-# This file was generated using idf.py save-defconfig. It can be edited manually.
-# Espressif IoT Development Framework (ESP-IDF) 5.5.0 Project Minimal Configuration
+# Minimal NimBLE config for periodic advertising with CTE (requires BLE 5.0).
 #
+# Supported targets: ESP32-H2, ESP32-C5, ESP32-C61, etc. (see README.md).
+# Run: idf.py set-target <chip> before building.
+
 CONFIG_BT_ENABLED=y
 CONFIG_BT_NIMBLE_ENABLED=y
-CONFIG_BT_NIMBLE_AOA_AOD=y
+CONFIG_BT_NIMBLE_50_FEATURE_SUPPORT=y
 CONFIG_BT_NIMBLE_EXT_ADV=y
+CONFIG_BT_NIMBLE_ENABLE_PERIODIC_ADV=y
+CONFIG_BT_NIMBLE_AOA_AOD=y

examples/bluetooth/nimble/ble_cte/ble_periodic_adv_with_cte/sdkconfig.defaults.esp32h2

@@ -1,5 +1,6 @@
-# This file was generated using idf.py save-defconfig. It can be edited manually.
-# Espressif IoT Development Framework (ESP-IDF) 5.5.0 Project Minimal Configuration
-#
 CONFIG_IDF_TARGET="esp32h2"
 CONFIG_BT_NIMBLE_SECURITY_ENABLE=n
+CONFIG_BT_NIMBLE_50_FEATURE_SUPPORT=y
+CONFIG_BT_NIMBLE_EXT_ADV=y
+CONFIG_BT_NIMBLE_ENABLE_PERIODIC_ADV=y
+CONFIG_BT_NIMBLE_AOA_AOD=y