change(sysview_heap_log): use esp sysview_mcore command for the JTAG capture

examples/system/sysview_tracing_heap_log/README.md

@@ -21,11 +21,9 @@ NOTE: In order to run this example you need OpenOCD version `v0.10.0-esp32-20190
 
     The gdbinit file includes commands to start tracing:
     ```
-    mon esp sysview start file:///tmp/heap_log.svdat
-    # For dual-core mode uncomment the line below and comment the line above
-    # mon esp sysview start file:///tmp/heap_log0.svdat file:///tmp/heap_log1.svdat
+    mon esp sysview_mcore start file:///tmp/heap_log.svdat
     ```
-    When program hits breakpoint at `heap_trace_start`, in single core mode, trace data will be saved to `/tmp/heap_log.svdat`. In dual core mode, there will be two trace data files, one for each core. `/tmp/heap_log0.svdat` and `/tmp/heap_log1.svdat`
+    When program hits breakpoint at `heap_trace_start`, trace data will be saved to `/tmp/heap_log.svdat`. The `esp sysview_mcore` command uses the SEGGER SystemView multi-core format, so a single file holds the trace for both single- and dual-core targets.
     Tracing will be stopped when program hits breakpoint at `heap_trace_stop`.
 
 3. [SEGGER SystemView tool](https://www.segger.com/products/development-tools/systemview/). By default SystemView shows only numeric values of IDs and parameters for IDF's heap messages in `Events` view. To make them pretty-looking you need to copy `SYSVIEW_FreeRTOS.txt` from the project's root directory to SystemView installation one.
@@ -54,7 +52,7 @@ To run the example and collect trace data:
 
 2. When program stops at `heap_trace_stop`  quit GDB.
 
-3. Open trace data file in SystemView tool.
+3. Open trace data file in SystemView tool. The multi-core format produced by `esp sysview_mcore` requires SEGGER SystemView v3.60 or later.
 
 4. Now you can inspect all collected events. Log messages are shown in `Terminal` view.
 
@@ -67,10 +65,7 @@ Since SystemView tool is mostly intended for OS level analysis. It allows just t
 ```
 $IDF_PATH/tools/esp_app_trace/sysviewtrace_proc.py -p -b build/sysview_tracing_heap_log.elf /tmp/heap_log.svdat
 ```
-And in dual core mode
-```
-$IDF_PATH/tools/esp_app_trace/sysviewtrace_proc.py -p -b build/sysview_tracing_heap_log.elf /tmp/heap_log0.svdat /tmp/heap_log1.svdat
-```
+The script auto-detects the multi-core capture format and processes both cores from the single file, so the same command works for single- and dual-core targets.
 
 Below is the sample scripts output.
 

examples/system/sysview_tracing_heap_log/gdbinit

@@ -6,15 +6,13 @@ maintenance flush register-cache
 
 tb heap_trace_start
 commands
-mon esp sysview start file:///tmp/heap_log.svdat
-# For dual-core mode uncomment the line below and comment the line above
-# mon esp sysview start file:///tmp/heap_log0.svdat file:///tmp/heap_log1.svdat
+mon esp sysview_mcore start file:///tmp/heap_log.svdat
 c
 end
 
 tb heap_trace_stop
 commands
-mon esp sysview stop
+mon esp sysview_mcore stop
 end
 
 c

examples/system/sysview_tracing_heap_log/pytest_sysview_tracing_heap_log.py

@@ -15,22 +15,18 @@ if typing.TYPE_CHECKING:
 
 
 def _test_examples_sysview_tracing_heap_log(openocd_dut: 'OpenOCD', idf_path: str, dut: IdfDut) -> None:
-    # Construct trace log paths
-    trace_log = [
-        os.path.join(dut.logdir, 'heap_log0.svdat')  # pylint: disable=protected-access
-    ]
-    if not dut.app.sdkconfig.get('ESP_SYSTEM_SINGLE_CORE_MODE') or dut.target == 'esp32s3':
-        trace_log.append(os.path.join(dut.logdir, 'heap_log1.svdat'))  # pylint: disable=protected-access
-    trace_files = ' '.join([f'file://{log}' for log in trace_log])
+    # Single multi-core capture file (esp sysview_mcore): one file is enough for
+    # both single- and dual-core targets.
+    trace_log = os.path.join(dut.logdir, 'heap_log.svdat')  # pylint: disable=protected-access
 
-    # Prepare gdbinit file
+    # Prepare gdbinit file pointing at this run's capture file
     gdb_logfile = os.path.join(dut.logdir, 'gdb.txt')
     gdbinit_orig = os.path.join(os.path.dirname(os.path.abspath(__file__)), 'gdbinit')
     gdbinit = os.path.join(dut.logdir, 'gdbinit')
     with open(gdbinit_orig) as f_r, open(gdbinit, 'w') as f_w:
         for line in f_r:
-            if line.startswith('mon esp sysview start'):
-                f_w.write(f'mon esp sysview start {trace_files}\n')
+            if line.startswith('mon esp sysview_mcore start'):
+                f_w.write(f'mon esp sysview_mcore start file://{trace_log}\n')
             else:
                 f_w.write(line)
 
@@ -52,8 +48,9 @@ def _test_examples_sysview_tracing_heap_log(openocd_dut: 'OpenOCD', idf_path: st
             # Wait for sysview files to be generated
             p.expect_exact('Tracing is STOPPED')
 
-    # Process sysview trace logs
-    command = [os.path.join(idf_path, 'tools', 'esp_app_trace', 'sysviewtrace_proc.py'), '-p'] + trace_log
+    # Process sysview trace log (sysviewtrace_proc.py auto-detects and splits the
+    # multi-core capture, so a single file works for single- and dual-core)
+    command = [os.path.join(idf_path, 'tools', 'esp_app_trace', 'sysviewtrace_proc.py'), '-p', trace_log]
     with pexpect.spawn(' '.join(command)) as sysviewtrace:
         sysviewtrace.expect(r'Found \d+ leaked bytes in \d+ blocks.', timeout=120)