Mirrors/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2026-10-01 18:50:34 +03:00
Code Issues Packages Projects Releases Wiki Activity

docs(lcd): update rd pin description for i80_controller example

Browse Source 
Closes https://github.com/espressif/esp-idf/issues/18277
This commit is contained in:
Chen Chen
2026-02-27 16:24:59 +08:00
parent c59aab9a07
commit 2df12ec47a
1 changed files with 9 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files
examples/peripherals/lcd/i80_controller/README.md
+9 -1
View File
@@ -37,7 +37,7 @@ The connection between ESP Board and the LCD is as follows:
| | | |
| DATA[0..7] |<------------>| DATA[0..7] |
| | | |
| PCLK +------------->| PCLK |
| PCLK +------------->| PCLK (WR) |
| | | |
| CS +------------->| CS |
| | | |
@@ -47,10 +47,16 @@ The connection between ESP Board and the LCD is as follows:
| | | |
| BK_LIGHT +------------->| BCKL |
| | | |
| 3V3 +------------->| RD |
| | | |
+-------------+ +----------------+
```
The GPIO number used by this example can be changed in [i80_controller_example_main.c](main/i80_controller_example_main.c).
> [!IMPORTANT]
> The 8080 interface also has an **RD** pin. The RD line must be **held high** when idle. (Connect to 3V3 or use pull-up resistors)
Especially, please pay attention to the binary signal level used to turn the LCD backlight on, some LCD modules need a low level to turn it on, while others require a high level. You can change the backlight level macro `EXAMPLE_LCD_BK_LIGHT_ON_LEVEL` in [i80_controller_example_main.c](main/i80_controller_example_main.c).
### Build and Flash
@@ -98,6 +104,8 @@ This example supports two ways of reading images
## Troubleshooting
* **Garbled or random display, or different image on each boot:** If your LCD has an RD pin with no internal pull-up, it must be held high. You can directly connect RD to the 3V3 or use a pull-up resistor.
* Can't get a stable UI when `EXAMPLE_LCD_I80_COLOR_IN_PSRAM` is enabled.
This is because of the limited PSRAM bandwidth, compared to the internal SRAM. You can either decrease the PCLK clock `EXAMPLE_LCD_PIXEL_CLOCK_HZ` from the menuconfig or increase the PSRAM working frequency `SPIRAM_SPEED` from the KConfig (e.g. **ESP32S3-Specific** -> **Set RAM clock speed**) or decrease the FPS in LVGL configuration. For illustration, this example has set the refresh period to 100ms in the default sdkconfig file.