mirror of
https://github.com/espressif/esp-idf.git
synced 2026-10-03 03:31:41 +03:00
docs: update get-statted documents for ESP32-C5
This commit is contained in:
Linda
@@ -2,4 +2,40 @@
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
To be updated for C5
|
||||
...
|
||||
esptool.py --chip esp32c5 -p /dev/ttyUSB0 -b 460800 --before=default_reset --after=hard_reset --no-stub write_flash --flash_mode dio --flash_freq 80m --flash_size 2MB 0x2000 bootloader/bootloader.bin 0x10000 hello_world.bin 0x8000 partition_table/partition-table.bin
|
||||
esptool.py v4.9.dev6
|
||||
Serial port /dev/ttyUSB0
|
||||
Connecting....
|
||||
Chip is ESP32-C5 (revision v1.0)
|
||||
Features: WiFi 6, BT 5, IEEE802.15.4
|
||||
Crystal is 48MHz
|
||||
MAC: 30:ed:a0:ff:fe:e0:af:38
|
||||
BASE MAC: 30:ed:a0:e0:af:38
|
||||
MAC_EXT: ff:fe
|
||||
ROM expects crystal freq: 48 MHz, detected 48 MHz
|
||||
Changing baud rate to 460800
|
||||
Changed.
|
||||
Enabling default SPI flash mode...
|
||||
Configuring flash size...
|
||||
Flash will be erased from 0x00002000 to 0x00007fff...
|
||||
Flash will be erased from 0x00010000 to 0x00034fff...
|
||||
Flash will be erased from 0x00008000 to 0x00008fff...
|
||||
Erasing flash...
|
||||
Took 0.09s to erase flash block
|
||||
Writing at 0x00007400... (100 %)
|
||||
Wrote 22528 bytes at 0x00002000 in 0.7 seconds (276.3 kbit/s)...
|
||||
Hash of data verified.
|
||||
Erasing flash...
|
||||
Took 0.37s to erase flash block
|
||||
Writing at 0x00034c00... (100 %)
|
||||
Wrote 151552 bytes at 0x00010000 in 4.4 seconds (275.6 kbit/s)...
|
||||
Hash of data verified.
|
||||
Erasing flash...
|
||||
Took 0.02s to erase flash block
|
||||
Writing at 0x00008800... (100 %)
|
||||
Wrote 3072 bytes at 0x00008000 in 0.1 seconds (281.8 kbit/s)...
|
||||
Hash of data verified.
|
||||
|
||||
Leaving...
|
||||
Hard resetting via RTS pin...
|
||||
|
||||
@@ -141,8 +141,8 @@
|
||||
|
||||
{IDF_TARGET_NAME} 支持 USB 外设，无需外部 USB 至 UART 桥，即可烧录二进制文件。
|
||||
|
||||
{IDF_TARGET_USB_PIN_DM:default="尚未更新！", esp32c3="GPIO18", esp32s3="GPIO19", esp32s2="GPIO19", esp32c6="GPIO12", esp32h2="GPIO26", esp32p4="GPIO24/26"}
|
||||
{IDF_TARGET_USB_PIN_DP:default="尚未更新！", esp32c3="GPIO19", esp32s3="GPIO20", esp32s2="GPIO20", esp32c6="GPIO13", esp32h2="GPIO27", esp32p4="GPIO25/27"}
|
||||
{IDF_TARGET_USB_PIN_DM:default="尚未更新！", esp32c3="GPIO18", esp32s3="GPIO19", esp32s2="GPIO19", esp32c6="GPIO12", esp32h2="GPIO26", esp32p4="GPIO24/26", esp32c5="GPIO13"}
|
||||
{IDF_TARGET_USB_PIN_DP:default="尚未更新！", esp32c3="GPIO19", esp32s3="GPIO20", esp32s2="GPIO20", esp32c6="GPIO13", esp32h2="GPIO27", esp32p4="GPIO25/27", esp32c5="GPIO14"}
|
||||
|
||||
{IDF_TARGET_NAME} 上的 USB 使用 **{IDF_TARGET_USB_PIN_DP}** 作为 **D+**， **{IDF_TARGET_USB_PIN_DM}** 作为 **D-**。
|
||||
|
||||
@@ -347,7 +347,7 @@ macOS 提供了 **屏幕** 命令，因此无需安装串口终端程序。
|
||||
输出示例
|
||||
^^^^^^^^^^^
|
||||
|
||||
{IDF_TARGET_STRAP_GPIO:default="[NEEDS TO BE UPDATED]", esp32="GPIO0", esp32s2="GPIO0", esp32s3="GPIO0", esp32c2="GPIO9", esp32c3="GPIO9", esp32c6="GPIO9", esp32h2="GPIO9", esp32p4="GPIO35"}
|
||||
{IDF_TARGET_STRAP_GPIO:default="[NEEDS TO BE UPDATED]", esp32="GPIO0", esp32s2="GPIO0", esp32s3="GPIO0", esp32c2="GPIO9", esp32c3="GPIO9", esp32c6="GPIO9", esp32h2="GPIO9", esp32p4="GPIO35", esp32c5="GPIO28"}
|
||||
|
||||
以下是一个日志示例。如果没看到任何输出，请尝试重置开发板。
|
||||
|
||||
|
||||
@@ -6,7 +6,7 @@
|
||||
连接失败
|
||||
-----------------
|
||||
|
||||
{IDF_TARGET_STRAP_GPIO:default="[NEEDS TO BE UPDATED]", esp32="GPIO0", esp32s2="GPIO0", esp32s3="GPIO0", esp32c2="GPIO9", esp32c3="GPIO9", esp32c6="GPIO9", esp32h2="GPIO9", esp32p4="GPIO35"}
|
||||
{IDF_TARGET_STRAP_GPIO:default="[NEEDS TO BE UPDATED]", esp32="GPIO0", esp32s2="GPIO0", esp32s3="GPIO0", esp32c2="GPIO9", esp32c3="GPIO9", esp32c6="GPIO9", esp32h2="GPIO9", esp32p4="GPIO35", esp32c5="GPIO28"}
|
||||
|
||||
如果在运行给定命令时出现如“连接失败”这样的错误，造成该错误的原因之一可能是运行 ``esptool.py`` 时出现错误。 ``esptool.py`` 是构建系统调用的程序，用于重置芯片、与 ROM 引导加载器交互以及烧录固件的工具。可以按照以下步骤进行手动复位，轻松解决该问题。如果问题仍未解决，请参考 `esptool 故障排除 <https://docs.espressif.com/projects/esptool/en/latest/esp32/troubleshooting.html>`_ 获取更多信息。
|
||||
|
||||
|
||||
@@ -59,6 +59,15 @@
|
||||
* 多种外设
|
||||
* 适用于较简单、大批量生产的物联网应用
|
||||
|
||||
.. only:: esp32c5
|
||||
|
||||
* 2.4 & 5 GHz 双频 Wi-Fi 6
|
||||
* 低功耗蓝牙
|
||||
* 802.15.4，支持 Thread 和 Zigbee 协议
|
||||
* 高性能 32 位 RISC-V 单核处理器
|
||||
* 多种外设
|
||||
* 内置安全硬件
|
||||
|
||||
.. only:: esp32c6
|
||||
|
||||
* 2.4 GHz Wi-Fi 6
|
||||
@@ -158,6 +167,13 @@
|
||||
|
||||
ESP8684-DevKitM-1 <https://docs.espressif.com/projects/espressif-esp-dev-kits/zh_CN/latest/esp8684/esp8684-devkitm-1/index.html>
|
||||
|
||||
.. only:: esp32c5
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
|
||||
ESP32-C5-DevKitC-1 <https://docs.espressif.com/projects/esp-dev-kits/zh_CN/latest/esp32c5/esp32-c5-devkitc-1/index.html>
|
||||
|
||||
.. only:: esp32c6
|
||||
|
||||
.. toctree::
|
||||
|
||||
@@ -1,6 +1,6 @@
|
||||
{IDF_TARGET_FEATURES:default="[NEEDS TO BE UPDATED]", esp32="WiFi/BT/BLE, silicon revision 1, 2 MB external flash", esp32s2="WiFi, silicon revision 0, 2 MB external flash", esp32s3="This is esp32s3 chip with 2 CPU core(s), WiFi/BLE, silicon revision 0, 2 MB external flash", esp32c2="WiFi/BLE, silicon revision 0, 2 MB embedded flash", esp32c3="WiFi/BLE, silicon revision 0, 2 MB external flash", esp32c6="WiFi/BLE, 802.15.4 (Zigbee/Thread), silicon revision v0.0, 2 MB external flash", esp32h2="BLE, 802.15.4 (Zigbee/Thread), silicon revision v0.1, 2 MB external flash", esp32p4="silicon revision v0.0, 2 MB external flash"}
|
||||
{IDF_TARGET_FEATURES:default="[NEEDS TO BE UPDATED]", esp32="WiFi/BT/BLE, silicon revision 1, 2 MB external flash", esp32s2="WiFi, silicon revision 0, 2 MB external flash", esp32s3="This is esp32s3 chip with 2 CPU core(s), WiFi/BLE, silicon revision 0, 2 MB external flash", esp32c2="WiFi/BLE, silicon revision 0, 2 MB embedded flash", esp32c3="WiFi/BLE, silicon revision 0, 2 MB external flash", esp32c6="WiFi/BLE, 802.15.4 (Zigbee/Thread), silicon revision v0.0, 2 MB external flash", esp32h2="BLE, 802.15.4 (Zigbee/Thread), silicon revision v0.1, 2 MB external flash", esp32p4="silicon revision v0.0, 2 MB external flash", esp32c5="WiFi/BLE, 802.15.4 (Zigbee/Thread), silicon revision v1.0, 2 MB external flash"}
|
||||
|
||||
{IDF_TARGET_HEAP_SIZE:default="[NEEDS TO BE UPDATED]", esp32="298968", esp32s2="253900", esp32s3="390684", esp32c2="203888", esp32c3="337332", esp32c6="473816", esp32h2="268256", esp32p4="618848"}
|
||||
{IDF_TARGET_HEAP_SIZE:default="[NEEDS TO BE UPDATED]", esp32="298968", esp32s2="253900", esp32s3="390684", esp32c2="203888", esp32c3="337332", esp32c6="473816", esp32h2="268256", esp32p4="618848", esp32c5="348724"}
|
||||
|
||||
编译工程
|
||||
=========================
|
||||
|
||||
@@ -15,20 +15,23 @@ H/W 硬件参考
|
||||
:esp32c3: 技术规格书 (PDF) <https://espressif.com/sites/default/files/documentation/esp32-c3_datasheet_cn.pdf>
|
||||
:esp32c6: 技术规格书 (PDF) <https://espressif.com/sites/default/files/documentation/esp32-c6_datasheet_cn.pdf>
|
||||
:esp32h2: 技术规格书 (PDF) <https://espressif.com/sites/default/files/documentation/esp32-h2_datasheet_cn.pdf>
|
||||
:esp32: 硬件设计指南 (PDF) <https://espressif.com/sites/default/files/documentation/esp32_hardware_design_guidelines_cn.pdf>
|
||||
:esp32s2: 硬件设计指南 (PDF) <https://espressif.com/sites/default/files/documentation/esp32-s2_hardware_design_guidelines_cn.pdf>
|
||||
:esp32s3: 硬件设计指南 (PDF) <https://espressif.com/sites/default/files/documentation/esp32-s3_hardware_design_guidelines_cn.pdf>
|
||||
:esp32c2: 硬件设计指南 (PDF) <https://espressif.com/sites/default/files/documentation/esp8684_hardware_design_guidelines_cn.pdf>
|
||||
:esp32c3: 硬件设计指南 (PDF) <https://espressif.com/sites/default/files/documentation/esp32-c3_hardware_design_guidelines_cn.pdf>
|
||||
:esp32c6: 硬件设计指南 (PDF) <https://espressif.com/sites/default/files/documentation/esp32-c6_hardware_design_guidelines_cn.pdf>
|
||||
:esp32h2: 硬件设计指南 (PDF) <https://espressif.com/sites/default/files/documentation/esp32-h2_hardware_design_guidelines_cn.pdf>
|
||||
:esp32: 勘误表及解决方法 (PDF) <https://espressif.com/sites/default/files/documentation/eco_and_workarounds_for_bugs_in_esp32_cn.pdf>
|
||||
:esp32s2: 勘误表及解决方法 (PDF) <https://www.espressif.com/sites/default/files/documentation/esp32-s2_errata_cn.pdf>
|
||||
:esp32s3: 勘误表及解决方法 (PDF) <https://www.espressif.com/sites/default/files/documentation/esp32-s3_errata_cn.pdf>
|
||||
:esp32c3: 勘误表及解决方法 (PDF) <https://www.espressif.com/sites/default/files/documentation/esp32-c3_errata_cn.pdf>
|
||||
:esp32c2: 勘误表及解决方法 (PDF) <https://www.espressif.com/sites/default/files/documentation/esp8684_errata_cn.pdf>
|
||||
:esp32c6: 勘误表及解决方法 (PDF) <https://www.espressif.com/sites/default/files/documentation/esp32-c6_errata_cn.pdf>
|
||||
:esp32h2: 勘误表及解决方法 (PDF) <https://www.espressif.com/sites/default/files/documentation/esp32-h2_errata_cn.pdf>
|
||||
:esp32c5: 技术规格书 (PDF) <https://espressif.com/sites/default/files/documentation/esp32-c5_datasheet_cn.pdf>
|
||||
:esp32: 硬件设计指南 <https://docs.espressif.com/projects/esp-hardware-design-guidelines/zh_CN/latest/esp32/index.html>
|
||||
:esp32s2: 硬件设计指南 <https://docs.espressif.com/projects/esp-hardware-design-guidelines/zh_CN/latest/esp32s2/index.html>
|
||||
:esp32s3: 硬件设计指南 <https://docs.espressif.com/projects/esp-hardware-design-guidelines/zh_CN/latest/esp32s3/index.html>
|
||||
:esp32c2: 硬件设计指南 <https://docs.espressif.com/projects/esp-hardware-design-guidelines/zh_CN/latest/esp32c2/index.html>
|
||||
:esp32c3: 硬件设计指南 <https://docs.espressif.com/projects/esp-hardware-design-guidelines/zh_CN/latest/esp32c3/index.html>
|
||||
:esp32c6: 硬件设计指南 <https://docs.espressif.com/projects/esp-hardware-design-guidelines/zh_CN/latest/esp32c6/index.html>
|
||||
:esp32h2: 硬件设计指南 <https://docs.espressif.com/projects/esp-hardware-design-guidelines/zh_CN/latest/esp32h2/index.html>
|
||||
:esp32p4: 硬件设计指南 <https://docs.espressif.com/projects/esp-hardware-design-guidelines/zh_CN/latest/esp32p4/index.html>
|
||||
:esp32c5: 硬件设计指南 <https://docs.espressif.com/projects/esp-hardware-design-guidelines/zh_CN/latest/esp32c5/index.html>
|
||||
:esp32: 芯片勘误表 <https://docs.espressif.com/projects/esp-chip-errata/zh_CN/latest/esp32/index.html>
|
||||
:esp32s2: 芯片勘误表 <https://docs.espressif.com/projects/esp-chip-errata/zh_CN/latest/esp32s2/index.html>
|
||||
:esp32s3: 芯片勘误表 <https://docs.espressif.com/projects/esp-chip-errata/zh_CN/latest/esp32s3/index.html>
|
||||
:esp32c3: 芯片勘误表 <https://docs.espressif.com/projects/esp-chip-errata/zh_CN/latest/esp32c3/index.html>
|
||||
:esp32c2: 芯片勘误表 <https://docs.espressif.com/projects/esp-chip-errata/zh_CN/latest/esp32c2/index.html>
|
||||
:esp32c6: 芯片勘误表 <https://docs.espressif.com/projects/esp-chip-errata/zh_CN/latest/esp32c6/index.html>
|
||||
:esp32h2: 芯片勘误表 <https://docs.espressif.com/projects/esp-chip-errata/zh_CN/latest/esp32h2/index.html>
|
||||
芯片变型 <https://espressif.com/zh-hans/products/socs?id={IDF_TARGET_NAME}>
|
||||
:not esp32p4: 模组 <https://www.espressif.com/zh-hans/products/modules?id={IDF_TARGET_NAME}>
|
||||
开发板 <https://www.espressif.com/zh-hans/products/devkits?id={IDF_TARGET_NAME}>
|
||||
|
||||
Reference in New Issue
Block a user