feat(ble): add priority level config on ESP32-C6

(cherry picked from commit 09337109b7)

Co-authored-by: zhaoweiliang <zhaoweiliang@espressif.com>

components/bt/controller/esp32c6/Kconfig.in

@@ -915,3 +915,65 @@ endmenu
 config BT_LE_DTM_ENABLED
     bool "Enable Direct Test Mode (DTM) feature"
     default n
+
+menu "Scheduling Priority Level Config"
+    choice BT_LE_ADV_SCHED_PRIO_LEVEL
+        prompt "The Adv scheduling priority level"
+        default BT_LE_ADV_SCHED_PRIO_LOW_LEVEL
+        help
+            The Adv scheduling priority level is used for arbitration when internal scheduling conflicts.
+        config BT_LE_ADV_SCHED_PRIO_LOW_LEVEL
+            bool "low priority level"
+        config BT_LE_ADV_SCHED_PRIO_MID_LEVEL
+            bool "medium priority level"
+        config BT_LE_ADV_SCHED_PRIO_HIGH_LEVEL
+            bool "high priority level"
+    endchoice
+
+    config BT_LE_DFT_ADV_SCHED_PRIO_LEVEL
+        int
+        default 0 if BT_LE_ADV_SCHED_PRIO_LOW_LEVEL
+        default 1 if BT_LE_ADV_SCHED_PRIO_MID_LEVEL
+        default 2 if BT_LE_ADV_SCHED_PRIO_HIGH_LEVEL
+        default 0
+
+    choice BT_LE_PERIODIC_ADV_SCHED_PRIO_LEVEL
+        prompt "The Periodic Adv scheduling priority level"
+        default BT_LE_PERIODIC_ADV_SCHED_PRIO_MID_LEVEL
+        help
+            The Periodic Adv scheduling priority level is used for arbitration when internal scheduling conflicts.
+        config BT_LE_PERIODIC_ADV_SCHED_PRIO_LOW_LEVEL
+            bool "low priority level"
+        config BT_LE_PERIODIC_ADV_SCHED_PRIO_MID_LEVEL
+            bool "medium priority level"
+        config BT_LE_PERIODIC_ADV_SCHED_PRIO_HIGH_LEVEL
+            bool "high priority level"
+    endchoice
+
+    config BT_LE_DFT_PERIODIC_ADV_SCHED_PRIO_LEVEL
+        int
+        default 0 if BT_LE_PERIODIC_ADV_SCHED_PRIO_LOW_LEVEL
+        default 1 if BT_LE_PERIODIC_ADV_SCHED_PRIO_MID_LEVEL
+        default 2 if BT_LE_PERIODIC_ADV_SCHED_PRIO_HIGH_LEVEL
+        default 1
+
+    choice BT_LE_SYNC_SCHED_PRIO_LEVEL
+        prompt "The Sync scheduling priority level"
+        default BT_LE_SYNC_SCHED_PRIO_MID_LEVEL
+        help
+            The SYNC scheduling priority level is used for arbitration when internal scheduling conflicts.
+        config BT_LE_SYNC_SCHED_PRIO_LOW_LEVEL
+            bool "low priority level"
+        config BT_LE_SYNC_SCHED_PRIO_MID_LEVEL
+            bool "medium priority level"
+        config BT_LE_SYNC_SCHED_PRIO_HIGH_LEVEL
+            bool "high priority level"
+    endchoice
+
+    config BT_LE_DFT_SYNC_SCHED_PRIO_LEVEL
+        int
+        default 0 if BT_LE_SYNC_SCHED_PRIO_LOW_LEVEL
+        default 1 if BT_LE_SYNC_SCHED_PRIO_MID_LEVEL
+        default 2 if BT_LE_SYNC_SCHED_PRIO_HIGH_LEVEL
+        default 1
+endmenu

components/bt/controller/esp32c6/esp_bt_cfg.h

@@ -300,6 +300,7 @@ extern "C" {
 #define RUN_BQB_TEST                        (0)
 #define RUN_QA_TEST                         (0)
 #define NIMBLE_DISABLE_SCAN_BACKOFF         (0)
+#define BT_LL_CTRL_PRIO_LVL_CFG ((CONFIG_BT_LE_DFT_SYNC_SCHED_PRIO_LEVEL << 4) | (CONFIG_BT_LE_DFT_PERIODIC_ADV_SCHED_PRIO_LEVEL << 2) | CONFIG_BT_LE_DFT_ADV_SCHED_PRIO_LEVEL)
 
 #ifdef __cplusplus
 }

components/bt/include/esp32c6/include/esp_bt.h

@@ -156,7 +156,7 @@ esp_err_t esp_ble_tx_power_set_enhanced(esp_ble_enhanced_power_type_t power_type
  */
 esp_power_level_t esp_ble_tx_power_get_enhanced(esp_ble_enhanced_power_type_t power_type, uint16_t handle);
 
-#define CONFIG_VERSION  0x20250606
+#define CONFIG_VERSION  0x20251022
 #define CONFIG_MAGIC    0x5A5AA5A5
 
 /**
@@ -232,6 +232,7 @@ typedef struct {
     int8_t ch39_txpwr;                               /*!< BLE transmit power (in dBm) used for BLE advertising on channel 39. */
     uint8_t adv_rsv_cnt;                             /*!< BLE adv state machine reserve count number */
     uint8_t conn_rsv_cnt;                            /*!< BLE conn state machine reserve count number */
+    uint8_t priority_level_cfg;                      /*!< The option for priority level configuration */
     uint32_t config_magic;                           /*!< Magic number for configuration validation */
 } esp_bt_controller_config_t;
 
@@ -295,6 +296,7 @@ typedef struct {
     .ch39_txpwr                 = BLE_LL_TX_PWR_DBM_N,                                  \
     .adv_rsv_cnt                = BLE_LL_ADV_SM_RESERVE_CNT_N,                          \
     .conn_rsv_cnt               = BLE_LL_CONN_SM_RESERVE_CNT_N,                         \
+    .priority_level_cfg         = BT_LL_CTRL_PRIO_LVL_CFG,                              \
     .config_magic = CONFIG_MAGIC,                                                       \
 }
 #elif CONFIG_IDF_TARGET_ESP32C61
@@ -356,6 +358,7 @@ typedef struct {
     .ch39_txpwr                 = BLE_LL_TX_PWR_DBM_N,                                  \
     .adv_rsv_cnt                = BLE_LL_ADV_SM_RESERVE_CNT_N,                          \
     .conn_rsv_cnt               = BLE_LL_CONN_SM_RESERVE_CNT_N,                         \
+    .priority_level_cfg         = BT_LL_CTRL_PRIO_LVL_CFG,                              \
     .config_magic = CONFIG_MAGIC,                                                       \
 }
 #endif