mirror of
https://github.com/espressif/esp-idf.git
synced 2026-10-02 03:00:34 +03:00
fix(bt): fixed some h4 issues reported by ci pipeline
This commit is contained in:
ShenWeilong
@@ -0,0 +1,759 @@
|
||||
|
||||
menuconfig BT_LE_50_FEATURE_SUPPORT
|
||||
bool "Enable BLE 5 feature"
|
||||
depends on !BT_NIMBLE_ENABLED
|
||||
default y
|
||||
help
|
||||
Enable BLE 5 feature
|
||||
|
||||
config BT_LE_LL_CFG_FEAT_LE_2M_PHY
|
||||
bool "Enable 2M Phy"
|
||||
depends on BT_LE_50_FEATURE_SUPPORT
|
||||
default y
|
||||
help
|
||||
Enable 2M-PHY
|
||||
|
||||
config BT_LE_LL_CFG_FEAT_LE_CODED_PHY
|
||||
bool "Enable coded Phy"
|
||||
depends on BT_LE_50_FEATURE_SUPPORT
|
||||
default y
|
||||
help
|
||||
Enable coded-PHY
|
||||
|
||||
config BT_LE_EXT_ADV
|
||||
bool "Enable extended advertising"
|
||||
depends on BT_LE_50_FEATURE_SUPPORT
|
||||
default y
|
||||
help
|
||||
Enable this option to do extended advertising. Extended advertising
|
||||
will be supported from BLE 5.0 onwards.
|
||||
|
||||
if BT_LE_EXT_ADV
|
||||
config BT_LE_MAX_EXT_ADV_INSTANCES
|
||||
int "Maximum number of extended advertising instances."
|
||||
range 0 4
|
||||
default 1
|
||||
depends on BT_LE_EXT_ADV
|
||||
help
|
||||
Change this option to set maximum number of extended advertising
|
||||
instances. Minimum there is always one instance of
|
||||
advertising. Enter how many more advertising instances you
|
||||
want.
|
||||
Each extended advertising instance will take about 0.5k DRAM.
|
||||
|
||||
config BT_LE_EXT_ADV_MAX_SIZE
|
||||
int "Maximum length of the advertising data."
|
||||
range 0 1650
|
||||
default 1650
|
||||
depends on BT_LE_EXT_ADV
|
||||
help
|
||||
Defines the length of the extended adv data. The value should not
|
||||
exceed 1650.
|
||||
|
||||
config BT_LE_ENABLE_PERIODIC_ADV
|
||||
bool "Enable periodic advertisement."
|
||||
default y
|
||||
depends on BT_LE_EXT_ADV
|
||||
help
|
||||
Enable this option to start periodic advertisement.
|
||||
|
||||
config BT_LE_PERIODIC_ADV_SYNC_TRANSFER
|
||||
bool "Enable Transfer Sync Events"
|
||||
depends on BT_LE_ENABLE_PERIODIC_ADV
|
||||
default y
|
||||
help
|
||||
This enables controller transfer periodic sync events to host
|
||||
|
||||
endif
|
||||
|
||||
config BT_LE_MAX_PERIODIC_SYNCS
|
||||
int "Maximum number of periodic advertising syncs"
|
||||
depends on BT_LE_50_FEATURE_SUPPORT && !BT_NIMBLE_ENABLED
|
||||
|
||||
range 0 8
|
||||
default 1 if BT_LE_ENABLE_PERIODIC_ADV
|
||||
default 0
|
||||
help
|
||||
Set this option to set the upper limit for number of periodic sync
|
||||
connections. This should be less than maximum connections allowed by
|
||||
controller.
|
||||
|
||||
config BT_LE_MAX_PERIODIC_ADVERTISER_LIST
|
||||
int "Maximum number of periodic advertiser list"
|
||||
depends on BT_LE_50_FEATURE_SUPPORT && !BT_NIMBLE_ENABLED
|
||||
range 1 5
|
||||
default 5
|
||||
help
|
||||
Set this option to set the upper limit for number of periodic advertiser list.
|
||||
|
||||
config BT_LE_POWER_CONTROL_ENABLED
|
||||
bool "Enable controller support for BLE Power Control"
|
||||
depends on BT_LE_50_FEATURE_SUPPORT && !BT_NIMBLE_ENABLED
|
||||
default n
|
||||
help
|
||||
Set this option to enable the Power Control feature on controller
|
||||
|
||||
config BT_LE_SUBRATE_ENABLED
|
||||
bool "Enable BLE connection subrating"
|
||||
depends on BT_LE_50_FEATURE_SUPPORT && SOC_BLE_SUBRATE_SUPPORTED
|
||||
default n
|
||||
help
|
||||
Set this option to enable the Connection Subrating feature on controller
|
||||
|
||||
config BT_LE_CTE_FEATURE_ENABLED
|
||||
bool "Enable Bluetooth LE Direction Finding (AoA/AoD)"
|
||||
depends on BT_LE_50_FEATURE_SUPPORT && SOC_BLE_CTE_SUPPORTED
|
||||
default n
|
||||
help
|
||||
Enable this option to activate Bluetooth LE Direction Finding (AoA/AoD) feature.
|
||||
Note:
|
||||
This feature allows devices to determine the direction of a Bluetooth CTE signal,
|
||||
enabling Angle of Arrival (AoA) and Angle of Departure (AoD) functionality.
|
||||
|
||||
config BT_LE_PERIODIC_ADV_WITH_RESPONSE_ENABLED
|
||||
bool "Enable BLE periodic advertising with response"
|
||||
depends on BT_LE_50_FEATURE_SUPPORT && SOC_BLE_PERIODIC_ADV_WITH_RESPONSE
|
||||
default n
|
||||
help
|
||||
This enables BLE periodic advertising with response feature
|
||||
|
||||
menuconfig BT_LE_ISO_SUPPORT
|
||||
bool "Enable BLE ISO feature"
|
||||
default n
|
||||
help
|
||||
Support BLE 5.2 ISO feature
|
||||
|
||||
config BT_LE_ISO_FRA_UNSEG
|
||||
bool "Enable Unsegmented mode for Framed PDU"
|
||||
depends on BT_LE_ISO_SUPPORT
|
||||
help
|
||||
Enable this to support the Framed Unsegmented mode.
|
||||
|
||||
config BT_LE_ISO_NSFC_EN
|
||||
bool "Enable Non-standard Flow Control (NSFC) mode"
|
||||
depends on BT_LE_ISO_SUPPORT
|
||||
default y
|
||||
help
|
||||
Enable this to support ISO non-standard flow control.
|
||||
Note:
|
||||
If non-standard flow control mode is used, no Number of
|
||||
Completed Packets event will be posted from Controller.
|
||||
Instead before transmitting an ISO packet, Host needs to
|
||||
invoke an API provided by Controller to make sure that
|
||||
the ISO packet could be accommodated by Controller.
|
||||
|
||||
config BT_LE_ISO_NSFC_NUM
|
||||
int "Maximum number of ISO packets for NSFC mode"
|
||||
depends on BT_LE_ISO_SUPPORT && BT_LE_ISO_NSFC_EN
|
||||
range 1 255
|
||||
default 12
|
||||
help
|
||||
Maximum number of ISO packets could be accommodated by
|
||||
Controller while using non-standard flow control mode.
|
||||
|
||||
config BT_LE_ISO_BUF_COUNT
|
||||
int "Number of allocated ISO buffers"
|
||||
depends on BT_LE_ISO_SUPPORT
|
||||
range 1 255
|
||||
default 12
|
||||
help
|
||||
Number of ISO buffers allocated in Controller.
|
||||
|
||||
config BT_LE_ISO_BUF_SIZE
|
||||
int "Size of each allocated ISO buffer"
|
||||
depends on BT_LE_ISO_SUPPORT
|
||||
range 1 65535
|
||||
default 251
|
||||
help
|
||||
Size of each allocated ISO buffer in Controller.
|
||||
And the allocated ISO buffers will be used to hold
|
||||
ISO Data PDUs for transmission.
|
||||
Currently a larger value is meaningless, which only
|
||||
increase memory consumption.
|
||||
|
||||
config BT_LE_ISO_BIG
|
||||
int "Maximum number of BIGs"
|
||||
depends on BT_LE_ISO_SUPPORT
|
||||
range 1 2
|
||||
default 1
|
||||
help
|
||||
Maximum number of BIGs.
|
||||
|
||||
config BT_LE_ISO_BIS
|
||||
int "Maximum number of BISes"
|
||||
depends on BT_LE_ISO_SUPPORT
|
||||
range 1 6
|
||||
default 2
|
||||
help
|
||||
Maximum number of BISes.
|
||||
|
||||
config BT_LE_ISO_BIS_PER_BIG
|
||||
int "Maximum number of BISes per BIG"
|
||||
depends on BT_LE_ISO_SUPPORT
|
||||
range 1 BT_LE_ISO_BIS
|
||||
default BT_LE_ISO_BIS
|
||||
help
|
||||
Maximum number of BISes per BIG.
|
||||
|
||||
config BT_LE_ISO_CIG
|
||||
int "Maximum number of CIGs"
|
||||
depends on BT_LE_ISO_SUPPORT
|
||||
range 1 2
|
||||
default 1
|
||||
help
|
||||
Maximum number of CIGs.
|
||||
|
||||
config BT_LE_ISO_CIS
|
||||
int "Maximum number of CISes"
|
||||
depends on BT_LE_ISO_SUPPORT
|
||||
range 1 6
|
||||
default 2
|
||||
help
|
||||
Maximum number of CISes.
|
||||
|
||||
config BT_LE_ISO_CIS_PER_CIG
|
||||
int "Maximum number of CISes per CIG"
|
||||
depends on BT_LE_ISO_SUPPORT
|
||||
range 1 BT_LE_ISO_CIS
|
||||
default BT_LE_ISO_CIS
|
||||
help
|
||||
Maximum number of CISes per CIG.
|
||||
|
||||
menu "Memory Settings"
|
||||
depends on !BT_NIMBLE_ENABLED
|
||||
|
||||
config BT_LE_MSYS_1_BLOCK_COUNT
|
||||
int "MSYS_1 Block Count"
|
||||
default 12
|
||||
help
|
||||
MSYS is a system level mbuf registry. For prepare write & prepare
|
||||
responses MBUFs are allocated out of msys_1 pool. For NIMBLE_MESH
|
||||
enabled cases, this block count is increased by 8 than user defined
|
||||
count.
|
||||
|
||||
config BT_LE_MSYS_1_BLOCK_SIZE
|
||||
int "MSYS_1 Block Size"
|
||||
default 256
|
||||
help
|
||||
Dynamic memory size of block 1
|
||||
|
||||
config BT_LE_MSYS_2_BLOCK_COUNT
|
||||
int "MSYS_2 Block Count"
|
||||
default 24
|
||||
help
|
||||
Dynamic memory count
|
||||
|
||||
config BT_LE_MSYS_2_BLOCK_SIZE
|
||||
int "MSYS_2 Block Size"
|
||||
default 320
|
||||
help
|
||||
Dynamic memory size of block 2
|
||||
|
||||
config BT_LE_MSYS_BUF_FROM_HEAP
|
||||
bool "Get Msys Mbuf from heap"
|
||||
default y
|
||||
depends on BT_LE_MSYS_INIT_IN_CONTROLLER
|
||||
help
|
||||
This option sets the source of the shared msys mbuf memory between
|
||||
the Host and the Controller. Allocate the memory from the heap if
|
||||
this option is sets, from the mempool otherwise.
|
||||
|
||||
config BT_LE_ACL_BUF_COUNT
|
||||
int "ACL Buffer count"
|
||||
default 10
|
||||
help
|
||||
The number of ACL data buffers.
|
||||
|
||||
config BT_LE_ACL_BUF_SIZE
|
||||
int "ACL Buffer size"
|
||||
default 517
|
||||
help
|
||||
This is the maximum size of the data portion of HCI ACL data packets.
|
||||
It does not include the HCI data header (of 4 bytes)
|
||||
|
||||
config BT_LE_HCI_EVT_BUF_SIZE
|
||||
int "HCI Event Buffer size"
|
||||
default 257 if BT_LE_EXT_ADV
|
||||
default 70
|
||||
help
|
||||
This is the size of each HCI event buffer in bytes. In case of
|
||||
extended advertising, packets can be fragmented. 257 bytes is the
|
||||
maximum size of a packet.
|
||||
|
||||
config BT_LE_HCI_EVT_HI_BUF_COUNT
|
||||
int "High Priority HCI Event Buffer count"
|
||||
default 30
|
||||
help
|
||||
This is the high priority HCI events' buffer size. High-priority
|
||||
event buffers are for everything except advertising reports. If there
|
||||
are no free high-priority event buffers then host will try to allocate a
|
||||
low-priority buffer instead
|
||||
|
||||
config BT_LE_HCI_EVT_LO_BUF_COUNT
|
||||
int "Low Priority HCI Event Buffer count"
|
||||
default 8
|
||||
help
|
||||
This is the low priority HCI events' buffer size. Low-priority event
|
||||
buffers are only used for advertising reports. If there are no free
|
||||
low-priority event buffers, then an incoming advertising report will
|
||||
get dropped
|
||||
endmenu
|
||||
|
||||
menu "Controller debug features"
|
||||
menuconfig BT_LE_CONTROLLER_LOG_ENABLED
|
||||
bool "Controller log enable"
|
||||
default n
|
||||
help
|
||||
Enable controller log
|
||||
|
||||
config BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2
|
||||
bool "Utilize BLE Log v2 for controller log"
|
||||
depends on BLE_LOG_ENABLED
|
||||
default y
|
||||
help
|
||||
Utilize BLE Log v2 for controller log
|
||||
|
||||
if !BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2
|
||||
config BT_LE_CONTROLLER_LOG_CTRL_ENABLED
|
||||
bool "enable controller log module"
|
||||
depends on BT_LE_CONTROLLER_LOG_ENABLED
|
||||
default y
|
||||
help
|
||||
Enable controller log module
|
||||
|
||||
config BT_LE_CONTROLLER_LOG_HCI_ENABLED
|
||||
bool "enable HCI log module"
|
||||
depends on BT_LE_CONTROLLER_LOG_ENABLED
|
||||
default y
|
||||
help
|
||||
Enable hci log module
|
||||
|
||||
config BT_LE_CONTROLLER_LOG_DUMP_ONLY
|
||||
bool "Controller log dump mode only"
|
||||
depends on BT_LE_CONTROLLER_LOG_ENABLED
|
||||
default y
|
||||
help
|
||||
Only operate in dump mode
|
||||
|
||||
config BT_LE_CONTROLLER_LOG_SPI_OUT_ENABLED
|
||||
bool "Output ble controller logs to SPI bus (Experimental)"
|
||||
depends on BT_LE_CONTROLLER_LOG_ENABLED
|
||||
depends on !BT_LE_CONTROLLER_LOG_DUMP_ONLY
|
||||
select BT_BLE_LOG_SPI_OUT_ENABLED
|
||||
default n
|
||||
help
|
||||
Output ble controller logs to SPI bus
|
||||
|
||||
config BT_LE_CONTROLLER_LOG_UHCI_OUT_ENABLED
|
||||
bool "Output ble controller logs via UART DMA (Experimental)"
|
||||
depends on BT_LE_CONTROLLER_LOG_ENABLED
|
||||
depends on !BT_LE_CONTROLLER_LOG_DUMP_ONLY
|
||||
depends on !BT_LE_CONTROLLER_LOG_SPI_OUT_ENABLED
|
||||
select BT_BLE_LOG_UHCI_OUT_ENABLED
|
||||
default y
|
||||
help
|
||||
Output ble controller logs via UART DMA
|
||||
|
||||
config BT_LE_CONTROLLER_LOG_STORAGE_ENABLE
|
||||
bool "Store ble controller logs to flash(Experimental)"
|
||||
depends on !BT_LE_CONTROLLER_LOG_DUMP_ONLY
|
||||
depends on BT_LE_CONTROLLER_LOG_ENABLED
|
||||
default n
|
||||
help
|
||||
Store ble controller logs to flash memory.
|
||||
|
||||
config BT_LE_CONTROLLER_LOG_PARTITION_SIZE
|
||||
int "size of ble controller log partition(Multiples of 4K)"
|
||||
depends on BT_LE_CONTROLLER_LOG_STORAGE_ENABLE
|
||||
default 65536
|
||||
help
|
||||
The size of ble controller log partition shall be a multiples of 4K.
|
||||
The name of log partition shall be "bt_ctrl_log".
|
||||
The partition type shall be ESP_PARTITION_TYPE_DATA.
|
||||
The partition sub_type shall be ESP_PARTITION_SUBTYPE_ANY.
|
||||
|
||||
config BT_LE_LOG_CTRL_BUF1_SIZE
|
||||
int "size of the first BLE controller LOG buffer"
|
||||
depends on BT_LE_CONTROLLER_LOG_ENABLED
|
||||
default 4096
|
||||
help
|
||||
Configure the size of the first BLE controller LOG buffer.
|
||||
|
||||
config BT_LE_LOG_CTRL_BUF2_SIZE
|
||||
int "size of the second BLE controller LOG buffer"
|
||||
depends on BT_LE_CONTROLLER_LOG_ENABLED
|
||||
default 1024
|
||||
help
|
||||
Configure the size of the second BLE controller LOG buffer.
|
||||
|
||||
config BT_LE_LOG_HCI_BUF_SIZE
|
||||
int "size of the BLE HCI LOG buffer"
|
||||
depends on BT_LE_CONTROLLER_LOG_ENABLED
|
||||
default 4096
|
||||
help
|
||||
Configure the size of the BLE HCI LOG buffer.
|
||||
endif
|
||||
|
||||
config BT_LE_CONTROLLER_LOG_WRAP_PANIC_HANDLER_ENABLE
|
||||
bool "Enable wrap panic handler"
|
||||
depends on BT_LE_CONTROLLER_LOG_ENABLED
|
||||
default n
|
||||
help
|
||||
Wrap esp_panic_handler to get controller logs when PC pointer exception crashes.
|
||||
|
||||
config BT_LE_CONTROLLER_LOG_TASK_WDT_USER_HANDLER_ENABLE
|
||||
bool "Enable esp_task_wdt_isr_user_handler implementation"
|
||||
depends on BT_LE_CONTROLLER_LOG_ENABLED
|
||||
default n
|
||||
help
|
||||
Implement esp_task_wdt_isr_user_handler to get controller logs when task wdt issue is triggered.
|
||||
|
||||
config BT_LE_CONTROLLER_LOG_OUTPUT_LEVEL
|
||||
int "The output level of controller log"
|
||||
depends on BT_LE_CONTROLLER_LOG_ENABLED
|
||||
range 0 5
|
||||
default 1
|
||||
help
|
||||
The output level of controller log.
|
||||
|
||||
config BT_LE_CONTROLLER_LOG_MOD_OUTPUT_SWITCH
|
||||
hex "The switch of module log output"
|
||||
depends on BT_LE_CONTROLLER_LOG_ENABLED
|
||||
range 0 0xFFFFFFFF
|
||||
default 0xFFFFFFFF
|
||||
help
|
||||
The switch of module log output, this is an unsigned 32-bit hexadecimal value.
|
||||
|
||||
config BT_LE_ERROR_SIM_ENABLED
|
||||
bool "Enable controller features for internal testing"
|
||||
default n
|
||||
|
||||
config BT_LE_ASSERT_WHEN_ABNORMAL_DISCONN_ENABLED
|
||||
bool "When ACL disconnects abnormally, assertion processing is performed(Experimental)"
|
||||
default n
|
||||
|
||||
config BT_LE_DEBUG_REMAIN_SCENE_ENABLED
|
||||
bool "Remain scene with GDB to capture relevant status info(Experimental)"
|
||||
default n
|
||||
help
|
||||
Retain scene with GDB to capture info, requires disabling WDT (CONFIG_ESP_INT_WDT, CONFIG_ESP_TASK_WDT_EN).
|
||||
|
||||
config BT_LE_PTR_CHECK_ENABLED
|
||||
bool "Enable boundary check for internal memory"
|
||||
default n
|
||||
|
||||
config BT_LE_MEM_CHECK_ENABLED
|
||||
bool "Enable memory allocation check"
|
||||
default n
|
||||
help
|
||||
Used in internal tests only. Enable the memory allocation check.
|
||||
endmenu
|
||||
|
||||
config BT_LE_LL_RESOLV_LIST_SIZE
|
||||
int "BLE LL Resolving list size"
|
||||
range 1 5
|
||||
default 4
|
||||
help
|
||||
Configure the size of resolving list used in link layer.
|
||||
|
||||
menuconfig BT_LE_SECURITY_ENABLE
|
||||
bool "Enable BLE SM feature"
|
||||
depends on !BT_NIMBLE_ENABLED
|
||||
default y
|
||||
help
|
||||
Enable BLE sm feature
|
||||
|
||||
config BT_LE_SM_LEGACY
|
||||
bool "Security manager legacy pairing"
|
||||
depends on BT_LE_SECURITY_ENABLE
|
||||
default y
|
||||
help
|
||||
Enable security manager legacy pairing
|
||||
|
||||
config BT_LE_SM_SC
|
||||
bool "Security manager secure connections (4.2)"
|
||||
depends on BT_LE_SECURITY_ENABLE
|
||||
default y
|
||||
help
|
||||
Enable security manager secure connections
|
||||
|
||||
config BT_LE_SM_SC_DEBUG_KEYS
|
||||
bool "Use predefined public-private key pair"
|
||||
default n
|
||||
depends on BT_LE_SECURITY_ENABLE && BT_LE_SM_SC
|
||||
help
|
||||
If this option is enabled, SM uses predefined DH key pair as described
|
||||
in Core Specification, Vol. 3, Part H, 2.3.5.6.1. This allows to
|
||||
decrypt air traffic easily and thus should only be used for debugging.
|
||||
|
||||
config BT_LE_LL_CFG_FEAT_LE_ENCRYPTION
|
||||
bool "Enable LE encryption"
|
||||
depends on BT_LE_SECURITY_ENABLE
|
||||
default y
|
||||
help
|
||||
Enable encryption connection
|
||||
|
||||
config BT_LE_CRYPTO_STACK_MBEDTLS
|
||||
bool "Override TinyCrypt with mbedTLS for crypto computations"
|
||||
default n
|
||||
depends on !BT_NIMBLE_ENABLED
|
||||
select MBEDTLS_CMAC_C
|
||||
help
|
||||
Enable this option to choose mbedTLS instead of TinyCrypt for crypto
|
||||
computations.
|
||||
|
||||
config BT_LE_WHITELIST_SIZE
|
||||
int "BLE white list size"
|
||||
range 1 15
|
||||
default 12
|
||||
depends on !BT_NIMBLE_ENABLED
|
||||
|
||||
help
|
||||
BLE list size
|
||||
|
||||
config BT_LE_LL_DUP_SCAN_LIST_COUNT
|
||||
int "BLE duplicate scan list count"
|
||||
range 1 100
|
||||
default 20
|
||||
help
|
||||
config the max count of duplicate scan list
|
||||
|
||||
config BT_LE_LL_SCA
|
||||
int "BLE Sleep clock accuracy"
|
||||
range 0 500
|
||||
default 60
|
||||
help
|
||||
Sleep clock accuracy of our device (in ppm)
|
||||
|
||||
config BT_LE_MAX_CONNECTIONS
|
||||
int "Maximum number of concurrent connections"
|
||||
depends on !BT_NIMBLE_ENABLED
|
||||
range 1 70
|
||||
default 3
|
||||
help
|
||||
Defines maximum number of concurrent BLE connections.
|
||||
Each connection will take about 1k DRAM.
|
||||
|
||||
choice BT_LE_COEX_PHY_CODED_TX_RX_TLIM
|
||||
prompt "Coexistence: limit on MAX Tx/Rx time for coded-PHY connection"
|
||||
default BT_LE_COEX_PHY_CODED_TX_RX_TLIM_DIS
|
||||
help
|
||||
When using PHY-Coded in BLE connection, limitation on max tx/rx time can be applied to
|
||||
better avoid dramatic performance deterioration of Wi-Fi.
|
||||
|
||||
config BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EN
|
||||
bool "Force Enable"
|
||||
help
|
||||
Always enable the limitation on max tx/rx time for Coded-PHY connection
|
||||
|
||||
config BT_LE_COEX_PHY_CODED_TX_RX_TLIM_DIS
|
||||
bool "Force Disable"
|
||||
help
|
||||
Disable the limitation on max tx/rx time for Coded-PHY connection
|
||||
endchoice
|
||||
|
||||
config BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EFF
|
||||
int
|
||||
default 1 if BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EN
|
||||
default 0 if BT_LE_COEX_PHY_CODED_TX_RX_TLIM_DIS
|
||||
|
||||
choice BT_LE_LP_CLK_SRC
|
||||
prompt "BLE low power clock source"
|
||||
default BT_LE_LP_CLK_SRC_MAIN_XTAL
|
||||
depends on BT_CTRL_SLEEP_ENABLE
|
||||
config BT_LE_LP_CLK_SRC_MAIN_XTAL
|
||||
bool "Use main XTAL as RTC clock source"
|
||||
help
|
||||
User main XTAL as RTC clock source.
|
||||
This option is recommended if external 32.768k XTAL is not available.
|
||||
Using the external 32.768 kHz XTAL will have lower current consumption
|
||||
in light sleep compared to using the main XTAL.
|
||||
|
||||
config BT_LE_LP_CLK_SRC_DEFAULT
|
||||
bool "Use system RTC slow clock source"
|
||||
help
|
||||
Use the same slow clock source as system RTC
|
||||
Using any clock source other than external 32.768 kHz XTAL supports only
|
||||
legacy ADV and SCAN due to low clock accuracy.
|
||||
|
||||
endchoice
|
||||
|
||||
config BT_LE_USE_ESP_TIMER
|
||||
bool "Enable Esp Timer for Callout"
|
||||
depends on !BT_NIMBLE_ENABLED
|
||||
default y
|
||||
help
|
||||
Set this option to use Esp Timer which has higher priority timer
|
||||
instead of FreeRTOS timer
|
||||
config BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP
|
||||
bool "BLE adv report flow control supported"
|
||||
default y
|
||||
help
|
||||
The function is mainly used to enable flow control for advertising reports. When it is enabled,
|
||||
advertising reports will be discarded by the controller if the number of unprocessed advertising
|
||||
reports exceeds the size of BLE adv report flow control.
|
||||
|
||||
config BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM
|
||||
int "BLE adv report flow control number"
|
||||
depends on BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP
|
||||
range 50 1000
|
||||
default 100
|
||||
help
|
||||
The number of unprocessed advertising report that bluetooth host can save.If you set
|
||||
`BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM` to a small value, this may cause adv packets lost.
|
||||
If you set `BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM` to a large value, bluetooth host may cache a
|
||||
lot of adv packets and this may cause system memory run out. For example, if you set
|
||||
it to 50, the maximum memory consumed by host is 35 * 50 bytes. Please set
|
||||
`BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM` according to your system free memory and handle adv
|
||||
packets as fast as possible, otherwise it will cause adv packets lost.
|
||||
|
||||
config BT_CTRL_BLE_ADV_REPORT_DISCARD_THRSHOLD
|
||||
int "BLE adv lost event threshold value"
|
||||
depends on BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP
|
||||
range 1 1000
|
||||
default 20
|
||||
help
|
||||
When adv report flow control is enabled, The ADV lost event will be generated when the number
|
||||
of ADV packets lost in the controller reaches this threshold. It is better to set a larger value.
|
||||
If you set `BT_CTRL_BLE_ADV_REPORT_DISCARD_THRSHOLD` to a small value or printf every adv lost event, it
|
||||
may cause adv packets lost more.
|
||||
|
||||
config BT_LE_SCAN_DUPL
|
||||
bool "BLE Scan Duplicate Options"
|
||||
default y
|
||||
help
|
||||
This select enables parameters setting of BLE scan duplicate.
|
||||
|
||||
choice BT_LE_SCAN_DUPL_TYPE
|
||||
prompt "Scan Duplicate Type"
|
||||
default BT_LE_SCAN_DUPL_TYPE_DEVICE
|
||||
depends on BT_LE_SCAN_DUPL
|
||||
help
|
||||
Scan duplicate have three ways. one is "Scan Duplicate By Device Address", This way is to use
|
||||
advertiser address filtering. The adv packet of the same address is only allowed to be reported once.
|
||||
Another way is "Scan Duplicate By Device Address And Advertising Data". This way is to use advertising
|
||||
data and device address filtering. All different adv packets with the same address are allowed to be
|
||||
reported. The last way is "Scan Duplicate By Advertising Data". This way is to use advertising data
|
||||
filtering. All same advertising data only allow to be reported once even though they are from
|
||||
different devices.
|
||||
|
||||
config BT_LE_SCAN_DUPL_TYPE_DEVICE
|
||||
bool "Scan Duplicate By Device Address"
|
||||
help
|
||||
This way is to use advertiser address filtering. The adv packet of the same address is only
|
||||
allowed to be reported once
|
||||
|
||||
config BT_LE_SCAN_DUPL_TYPE_DATA
|
||||
bool "Scan Duplicate By Advertising Data"
|
||||
help
|
||||
This way is to use advertising data filtering. All same advertising data only allow to be reported
|
||||
once even though they are from different devices.
|
||||
|
||||
config BT_LE_SCAN_DUPL_TYPE_DATA_DEVICE
|
||||
bool "Scan Duplicate By Device Address And Advertising Data"
|
||||
help
|
||||
This way is to use advertising data and device address filtering. All different adv packets with
|
||||
the same address are allowed to be reported.
|
||||
endchoice
|
||||
|
||||
config BT_LE_SCAN_DUPL_TYPE
|
||||
int
|
||||
depends on BT_LE_SCAN_DUPL
|
||||
default 0 if BT_LE_SCAN_DUPL_TYPE_DEVICE
|
||||
default 1 if BT_LE_SCAN_DUPL_TYPE_DATA
|
||||
default 2 if BT_LE_SCAN_DUPL_TYPE_DATA_DEVICE
|
||||
default 0
|
||||
|
||||
|
||||
config BT_LE_SCAN_DUPL_CACHE_SIZE
|
||||
int "Maximum number of devices in scan duplicate filter"
|
||||
depends on BT_LE_SCAN_DUPL
|
||||
range 10 1000
|
||||
default 100
|
||||
help
|
||||
Maximum number of devices which can be recorded in scan duplicate filter.
|
||||
When the maximum amount of device in the filter is reached, the cache will be refreshed.
|
||||
|
||||
config BT_LE_SCAN_DUPL_CACHE_REFRESH_PERIOD
|
||||
int "Duplicate scan list refresh period (seconds)"
|
||||
depends on BT_LE_SCAN_DUPL
|
||||
range 0 1000
|
||||
default 0
|
||||
help
|
||||
If the period value is non-zero, the controller will periodically clear the device information
|
||||
stored in the scan duuplicate filter. If it is 0, the scan duuplicate filter will not be cleared
|
||||
until the scanning is disabled. Duplicate advertisements for this period should not be sent to the
|
||||
Host in advertising report events.
|
||||
There are two scenarios where the ADV packet will be repeatedly reported:
|
||||
1. The duplicate scan cache is full, the controller will delete the oldest device information and
|
||||
add new device information.
|
||||
2. When the refresh period is up, the controller will clear all device information and start filtering
|
||||
again.
|
||||
|
||||
config BT_LE_MSYS_INIT_IN_CONTROLLER
|
||||
bool "Msys Mbuf Init in Controller"
|
||||
default y
|
||||
|
||||
config BT_LE_TX_CCA_ENABLED
|
||||
bool "Enable TX CCA feature"
|
||||
default n
|
||||
help
|
||||
Enable CCA feature to cancel sending the packet if the signal power is stronger than CCA threshold.
|
||||
|
||||
config BT_LE_CCA_RSSI_THRESH
|
||||
int "CCA RSSI threshold value"
|
||||
depends on BT_LE_TX_CCA_ENABLED
|
||||
range 20 100
|
||||
default 20
|
||||
help
|
||||
Power threshold of CCA in unit of -1 dBm.
|
||||
|
||||
choice BT_LE_DFT_TX_POWER_LEVEL_DBM
|
||||
prompt "BLE default Tx power level(dBm)"
|
||||
default BT_LE_DFT_TX_POWER_LEVEL_P9
|
||||
help
|
||||
Specify default Tx power level(dBm).
|
||||
config BT_LE_DFT_TX_POWER_LEVEL_N15
|
||||
bool "-15dBm"
|
||||
config BT_LE_DFT_TX_POWER_LEVEL_N12
|
||||
bool "-12dBm"
|
||||
config BT_LE_DFT_TX_POWER_LEVEL_N9
|
||||
bool "-9dBm"
|
||||
config BT_LE_DFT_TX_POWER_LEVEL_N6
|
||||
bool "-6dBm"
|
||||
config BT_LE_DFT_TX_POWER_LEVEL_N3
|
||||
bool "-3dBm"
|
||||
config BT_LE_DFT_TX_POWER_LEVEL_N0
|
||||
bool "0dBm"
|
||||
config BT_LE_DFT_TX_POWER_LEVEL_P3
|
||||
bool "+3dBm"
|
||||
config BT_LE_DFT_TX_POWER_LEVEL_P6
|
||||
bool "+6dBm"
|
||||
config BT_LE_DFT_TX_POWER_LEVEL_P9
|
||||
bool "+9dBm"
|
||||
config BT_LE_DFT_TX_POWER_LEVEL_P12
|
||||
bool "+12dBm"
|
||||
config BT_LE_DFT_TX_POWER_LEVEL_P15
|
||||
bool "+15dBm"
|
||||
config BT_LE_DFT_TX_POWER_LEVEL_P18
|
||||
bool "+18dBm"
|
||||
config BT_LE_DFT_TX_POWER_LEVEL_P20
|
||||
bool "+20dBm"
|
||||
endchoice
|
||||
|
||||
config BT_LE_DFT_TX_POWER_LEVEL_DBM_EFF
|
||||
int
|
||||
default -15 if BT_LE_DFT_TX_POWER_LEVEL_N15
|
||||
default -12 if BT_LE_DFT_TX_POWER_LEVEL_N12
|
||||
default -9 if BT_LE_DFT_TX_POWER_LEVEL_N9
|
||||
default -6 if BT_LE_DFT_TX_POWER_LEVEL_N6
|
||||
default -3 if BT_LE_DFT_TX_POWER_LEVEL_N3
|
||||
default 0 if BT_LE_DFT_TX_POWER_LEVEL_N0
|
||||
default 3 if BT_LE_DFT_TX_POWER_LEVEL_P3
|
||||
default 6 if BT_LE_DFT_TX_POWER_LEVEL_P6
|
||||
default 9 if BT_LE_DFT_TX_POWER_LEVEL_P9
|
||||
default 12 if BT_LE_DFT_TX_POWER_LEVEL_P12
|
||||
default 15 if BT_LE_DFT_TX_POWER_LEVEL_P15
|
||||
default 18 if BT_LE_DFT_TX_POWER_LEVEL_P18
|
||||
default 20 if BT_LE_DFT_TX_POWER_LEVEL_P20
|
||||
default 0
|
||||
@@ -34,8 +34,10 @@
|
||||
#define _OS_MEMPOOL_H_
|
||||
|
||||
#include <stdbool.h>
|
||||
#include "os/os.h"
|
||||
|
||||
#include "os/os_error.h"
|
||||
#include "os/queue.h"
|
||||
#include "btdm_mempool.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
@@ -76,10 +78,11 @@ struct os_mempool {
|
||||
SLIST_HEAD(,os_memblock);
|
||||
/** Name for memory block */
|
||||
const char *name;
|
||||
/** The number of allocated blocks. */
|
||||
uint32_t mp_alloc_blocks;
|
||||
};
|
||||
|
||||
static_assert(sizeof(struct os_mempool) == sizeof(struct btdm_mempool),
|
||||
"Error: size of os_mempool");
|
||||
|
||||
/**
|
||||
* Indicates an extended mempool. Address can be safely cast to
|
||||
* (struct os_mempool_ext *).
|
||||
|
||||
Reference in New Issue
Block a user