feat(psram): support bss on psram on p4

components/esp_system/ld/esp32p4/memory.ld.in

@@ -103,6 +103,9 @@ MEMORY
      This segment is placed at the beginning of LP RAM, as the end of LP RAM is occupied by LP ROM stack/data
   */
   lp_reserved_seg(RW) :        org = 0x50108000, len = RESERVE_RTC_MEM
+
+  /* PSRAM seg */
+  extern_ram_seg(RWX) :        org = 0x48000000, len = IDROM_SEG_SIZE
 }
 
 /* Heap ends at top of dram0_0_seg */
@@ -135,6 +138,12 @@ REGION_ALIAS("rtc_reserved_seg", lp_reserved_seg );
   REGION_ALIAS("rodata_seg_high", sram_high);
 #endif // CONFIG_APP_BUILD_USE_FLASH_SECTIONS
 
+#if CONFIG_SPIRAM_XIP_FROM_PSRAM
+  REGION_ALIAS("ext_ram_seg", drom_seg);
+#else
+  REGION_ALIAS("ext_ram_seg", extern_ram_seg);
+#endif //#if CONFIG_SPIRAM_XIP_FROM_PSRAM
+
 /**
  *  If rodata default segment is placed in `drom_seg`, then flash's first rodata section must
  *  also be first in the segment.

components/esp_system/ld/esp32p4/sections.ld.in

@@ -475,6 +475,28 @@ SECTIONS
     mapping[rodata_noload]
   } > rodata_seg_low
 
+#if CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY
+#if CONFIG_SPIRAM_XIP_FROM_PSRAM
+  /**
+   * This section is required to skip flash sections, because `extern_ram_seg`
+   * and `drom_seg` / `irom_seg` are on the same bus when xip on psram
+   */
+  .ext_ram.dummy (NOLOAD):
+  {
+    . = ORIGIN(ext_ram_seg) + (_rodata_reserved_end - _flash_rodata_dummy_start);
+    . = ALIGN (0x10000);
+  } > ext_ram_seg
+#endif  //CONFIG_SPIRAM_XIP_FROM_PSRAM
+
+  /* This section holds .ext_ram.bss data, and will be put in PSRAM */
+  .ext_ram.bss (NOLOAD) :
+  {
+    _ext_ram_bss_start = ABSOLUTE(.);
+    mapping[extern_ram]
+    ALIGNED_SYMBOL(4, _ext_ram_bss_end)
+  } > ext_ram_seg
+#endif  //CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY
+
   .dram0.bss (NOLOAD) :
   {
     ALIGNED_SYMBOL(4, _bss_start_low)