esp32/rtc: fix xtal unstable in some cases when sleep

1. add xtal buf wait to fix high temperature restart issue
2. add min sleep value to fix xtal stop due to too short sleep time issue
This commit is contained in:
jingli
2022-10-09 19:58:58 +08:00
parent 0fa55c897f
commit 0a44d09f4f
17 changed files with 36 additions and 29 deletions
@@ -86,6 +86,11 @@ typedef enum {
/* Leave this type define for compatibility */
typedef esp_sleep_source_t esp_sleep_wakeup_cause_t;
enum {
ESP_ERR_SLEEP_REJECT = ESP_ERR_INVALID_STATE,
ESP_ERR_SLEEP_TOO_SHORT_SLEEP_DURATION = ESP_ERR_INVALID_ARG,
};
/**
* @brief Disable wakeup source
*
@@ -372,7 +377,10 @@ void esp_deep_sleep_start(void) __attribute__((noreturn));
*
* @return
* - ESP_OK on success (returned after wakeup)
* - ESP_ERR_INVALID_STATE if WiFi or BT is not stopped
* - ESP_ERR_SLEEP_REJECT sleep request is rejected(wakeup source set before the sleep request)
* - ESP_ERR_SLEEP_TOO_SHORT_SLEEP_DURATION after deducting the sleep flow overhead, the final sleep duration
* is too short to cover the minimum sleep duration of the chip, when
* rtc timer wakeup source enabled
*/
esp_err_t esp_light_sleep_start(void);
+14 -6
View File
@@ -637,7 +637,7 @@ static esp_err_t esp_light_sleep_inner(uint32_t pd_flags,
rtc_vddsdio_config_t vddsdio_config)
{
// Enter sleep
esp_err_t err = esp_sleep_start(pd_flags);
uint32_t reject = esp_sleep_start(pd_flags);
// If VDDSDIO regulator was controlled by RTC registers before sleep,
// restore the configuration.
@@ -650,7 +650,8 @@ static esp_err_t esp_light_sleep_inner(uint32_t pd_flags,
// Wait for the flash chip to start up
esp_rom_delay_us(flash_enable_time_us);
}
return err;
return reject ? ESP_ERR_SLEEP_REJECT : ESP_OK;
}
/**
@@ -811,11 +812,18 @@ esp_err_t esp_light_sleep_start(void)
wdt_hal_write_protect_enable(&rtc_wdt_ctx);
}
// Enter sleep, then wait for flash to be ready on wakeup
esp_err_t err = esp_light_sleep_inner(pd_flags,
flash_enable_time_us, vddsdio_config);
esp_err_t err = ESP_OK;
int64_t final_sleep_duration_us = (int64_t)s_config.sleep_duration - (int64_t)s_config.sleep_time_adjustment;
int64_t min_sleep_duration_us = rtc_time_slowclk_to_us(RTC_CNTL_MIN_SLP_VAL_MIN, s_config.rtc_clk_cal_period);
s_light_sleep_wakeup = true;
// if rtc timer wakeup source is enabled, need to compare final sleep duration and min sleep duration to avoid late wakeup
if ((s_config.wakeup_triggers & RTC_TIMER_TRIG_EN) && (final_sleep_duration_us <= min_sleep_duration_us)) {
err = ESP_ERR_SLEEP_TOO_SHORT_SLEEP_DURATION;
} else {
// Enter sleep, then wait for flash to be ready on wakeup
err = esp_light_sleep_inner(pd_flags, flash_enable_time_us, vddsdio_config);
s_light_sleep_wakeup = true;
}
// System timer has been stopped for the duration of the sleep, correct for that.
uint64_t rtc_ticks_at_end = rtc_time_get();