Mirrors/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2026-10-03 03:31:41 +03:00
Code Issues Packages Projects Releases Wiki Activity

feat(lcd): support i80 lcd driver on esp32p4

Browse Source
This commit is contained in:
morris
2024-09-04 11:39:55 +08:00
parent 14f723244c
commit 03df9a2df2
27 changed files with 272 additions and 148 deletions
Download Patch File Download Diff File Expand all files Collapse all files
components/esp_lcd/rgb/esp_lcd_panel_rgb.c
+9 -9
View File
@@ -196,7 +196,7 @@ static esp_err_t lcd_rgb_panel_destroy(esp_rgb_panel_t *rgb_panel)
lcd_ll_enable_clock(rgb_panel->hal.dev, false);
}
if (rgb_panel->panel_id >= 0) {
PERIPH_RCC_RELEASE_ATOMIC(lcd_periph_signals.panels[rgb_panel->panel_id].module, ref_count) {
PERIPH_RCC_RELEASE_ATOMIC(lcd_periph_rgb_signals.panels[rgb_panel->panel_id].module, ref_count) {
if (ref_count == 0) {
lcd_ll_enable_bus_clock(rgb_panel->panel_id, false);
}
@@ -306,7 +306,7 @@ esp_err_t esp_lcd_new_rgb_panel(const esp_lcd_rgb_panel_config_t *rgb_panel_conf
rgb_panel->panel_id = panel_id;
// enable APB to access LCD registers
PERIPH_RCC_ACQUIRE_ATOMIC(lcd_periph_signals.panels[panel_id].module, ref_count) {
PERIPH_RCC_ACQUIRE_ATOMIC(lcd_periph_rgb_signals.panels[panel_id].module, ref_count) {
if (ref_count == 0) {
lcd_ll_enable_bus_clock(panel_id, true);
lcd_ll_reset_register(panel_id);
@@ -332,7 +332,7 @@ esp_err_t esp_lcd_new_rgb_panel(const esp_lcd_rgb_panel_config_t *rgb_panel_conf
}
// install interrupt service, (LCD peripheral shares the interrupt source with Camera by different mask)
int isr_flags = LCD_RGB_INTR_ALLOC_FLAGS | ESP_INTR_FLAG_SHARED | ESP_INTR_FLAG_LOWMED;
ret = esp_intr_alloc_intrstatus(lcd_periph_signals.panels[panel_id].irq_id, isr_flags,
ret = esp_intr_alloc_intrstatus(lcd_periph_rgb_signals.panels[panel_id].irq_id, isr_flags,
(uint32_t)lcd_ll_get_interrupt_status_reg(rgb_panel->hal.dev),
LCD_LL_EVENT_VSYNC_END, lcd_default_isr_handler, rgb_panel, &rgb_panel->intr);
ESP_GOTO_ON_ERROR(ret, err, TAG, "install interrupt failed");
@@ -801,7 +801,7 @@ static esp_err_t rgb_panel_invert_color(esp_lcd_panel_t *panel, bool invert_colo
// inverting the data line by GPIO matrix
for (int i = 0; i < rgb_panel->data_width; i++) {
if (rgb_panel->data_gpio_nums[i] >= 0) {
esp_rom_gpio_connect_out_signal(rgb_panel->data_gpio_nums[i], lcd_periph_signals.panels[panel_id].data_sigs[i],
esp_rom_gpio_connect_out_signal(rgb_panel->data_gpio_nums[i], lcd_periph_rgb_signals.panels[panel_id].data_sigs[i],
invert_color_data, false);
}
}
@@ -857,34 +857,34 @@ static esp_err_t lcd_rgb_panel_configure_gpio(esp_rgb_panel_t *panel, const esp_
gpio_hal_iomux_func_sel(GPIO_PIN_MUX_REG[panel_config->data_gpio_nums[i]], PIN_FUNC_GPIO);
gpio_set_direction(panel_config->data_gpio_nums[i], GPIO_MODE_OUTPUT);
esp_rom_gpio_connect_out_signal(panel_config->data_gpio_nums[i],
lcd_periph_signals.panels[panel_id].data_sigs[i], false, false);
lcd_periph_rgb_signals.panels[panel_id].data_sigs[i], false, false);
}
}
if (panel_config->hsync_gpio_num >= 0) {
gpio_hal_iomux_func_sel(GPIO_PIN_MUX_REG[panel_config->hsync_gpio_num], PIN_FUNC_GPIO);
gpio_set_direction(panel_config->hsync_gpio_num, GPIO_MODE_OUTPUT);
esp_rom_gpio_connect_out_signal(panel_config->hsync_gpio_num,
lcd_periph_signals.panels[panel_id].hsync_sig, false, false);
lcd_periph_rgb_signals.panels[panel_id].hsync_sig, false, false);
}
if (panel_config->vsync_gpio_num >= 0) {
gpio_hal_iomux_func_sel(GPIO_PIN_MUX_REG[panel_config->vsync_gpio_num], PIN_FUNC_GPIO);
gpio_set_direction(panel_config->vsync_gpio_num, GPIO_MODE_OUTPUT);
esp_rom_gpio_connect_out_signal(panel_config->vsync_gpio_num,
lcd_periph_signals.panels[panel_id].vsync_sig, false, false);
lcd_periph_rgb_signals.panels[panel_id].vsync_sig, false, false);
}
// PCLK may not be necessary in some cases (i.e. VGA output)
if (panel_config->pclk_gpio_num >= 0) {
gpio_hal_iomux_func_sel(GPIO_PIN_MUX_REG[panel_config->pclk_gpio_num], PIN_FUNC_GPIO);
gpio_set_direction(panel_config->pclk_gpio_num, GPIO_MODE_OUTPUT);
esp_rom_gpio_connect_out_signal(panel_config->pclk_gpio_num,
lcd_periph_signals.panels[panel_id].pclk_sig, false, false);
lcd_periph_rgb_signals.panels[panel_id].pclk_sig, false, false);
}
// DE signal might not be necessary for some RGB LCD
if (panel_config->de_gpio_num >= 0) {
gpio_hal_iomux_func_sel(GPIO_PIN_MUX_REG[panel_config->de_gpio_num], PIN_FUNC_GPIO);
gpio_set_direction(panel_config->de_gpio_num, GPIO_MODE_OUTPUT);
esp_rom_gpio_connect_out_signal(panel_config->de_gpio_num,
lcd_periph_signals.panels[panel_id].de_sig, false, false);
lcd_periph_rgb_signals.panels[panel_id].de_sig, false, false);
}
// disp enable GPIO is optional
if (panel_config->disp_gpio_num >= 0) {