At urgent request from @hpk42, this adds a config option `team_profile`.
This option is only settable via SQLite (not exposed in the UI), and the
only thing it does is disabling synchronization of seen status.
I tested manually on my Android phone that it works.
Not straigthforward to write an automatic test, because we want to test that something
does _not_ happen (i.e. that the seen status is _not_ synchronized), and
it's not clear how long to wait before we check.
Probably it's fine to just not add a test.
This is what I tried:
```python
@pytest.mark.parametrize("team_profile", [True, False])
def test_markseen_basic(team_profile, acfactory):
"""
Test that seen status is synchronized iff `team_profile` isn't set.
"""
alice, bob = acfactory.get_online_accounts(2)
# Bob sets up a second device.
bob2 = bob.clone()
bob2.start_io()
alice_chat_bob = alice.create_chat(bob)
bob.create_chat(alice)
bob2.create_chat(alice)
alice_chat_bob.send_text("Hello Bob!")
message = bob.wait_for_incoming_msg()
message2 = bob2.wait_for_incoming_msg()
assert message2.get_snapshot().state == MessageState.IN_FRESH
message.mark_seen()
# PROBLEM: We're not waiting 'long enough',
# so, the 'state == MessageState.IN_SEEN' assertion below fails
bob.create_chat(bob).send_text("Self-sent message")
self_sent = bob2.wait_for_msg(EventType.MSGS_CHANGED)
assert self_sent.get_snapshot().text == "Self-sent message"
if team_profile:
assert message2.get_snapshot().state == MessageState.IN_FRESH
else:
assert message2.get_snapshot().state == MessageState.IN_SEEN
```
This adds information of all used transports to `Context.get_info` in
the key `used_transport_settings`.
The format is the same as in `used_account_settings`. The new property
also contains the primary account, so we could remove
`used_account_settings` now, though there is also
`entered_account_settings` in which it stays in relation.
- there is an alternative pr at
https://github.com/chatmail/core/pull/7584, which gives each transport
it's own key, which improves readability.
closes#7581
- Db encryption does nothing with blobs, so fs/disk encryption is recommended.
- Isolation from other apps is needed anyway.
- Experimental database encryption was removed on iOS and Android.
- Delta Touch is using CFFI API with a manually entered password because Ubuntu Touch does not offer
filesystem or disk encryption, but we don't want new users of these APIs, such as bot developers.
And enable it by default as the standard Header Protection is backward-compatible.
Also this tests extra IMF header removal when a message has standard Header Protection since now we
can send such messages.
Omit Legacy Display Elements from "text/plain" and "text/html" (implement 4.5.3.{2,3} of
https://www.rfc-editor.org/rfc/rfc9788 "Header Protection for Cryptographically Protected Email").
adb brought this up in an internal discussion.
With the recent introduction of channels it becomes easier to hit the
limit
and it becomes impossible to send messages to a channel with more than
1000 members, this pr fixes that.
---------
Co-authored-by: Hocuri <hocuri@gmx.de>
For multiple transports we will need to run
multiple IMAP clients in parallel.
UID validity change detected by one IMAP client
should not result in UID resync
for another IMAP client.
We use query_and_then() instead of query_map() function now.
The difference is that row processing function
returns anyhow::Result, so simple fallible processing
like JSON parsing can be done inside of it
when calling query_map_vec() and query_map_collect()
without having to resort to query_map()
and iterating over all rows again afterwards.
`login_param` module is now for user-visible entered login parameters,
while the `transport` module contains structures for internal
representation of connection candidate list
created during transport configuration.
It's used in `fetch_existing_msgs()`, but we can remove it and tell users that they need to
move/copy messages from Sentbox to Inbox so that Delta Chat adds all contacts from them. This way
users will be also informed that Delta Chat needs users to CC/BCC/To themselves to see messages sent
from other MUAs.
The motivation is to reduce code complexity, get rid of the extra IMAP connection and cases when
messages are added to chats by Inbox and Sentbox loops in parallel which leads to various message
sorting bugs, particularly to outgoing messages breaking sorting of incoming ones which are fetched
later, but may have a smaller "Date".
We do not try to delete resent messages
anymore. Previously resent messages
were distinguised by having duplicate Message-ID,
but future Date, but now we need to download
the message before we even see the Date.
We now move the message to the destination folder
but do not fetch it.
It may not be a good idea to delete
the duplicate in multi-device setups anyway,
because the device which has a message
may delete the duplicate of a message
the other device missed.
To avoid triggering IMAP busy move loop
described in the comments
we now only move the messages
from INBOX and Spam folders.
This way, the statistics / self-reporting bot will be made into an
opt-in regular sending of statistics, where you enable the setting once
and then they will be sent automatically. The statistics will be sent to
a bot, so that the user can see exactly which data is being sent, and
how often. The chat will be archived and muted by default, so that it
doesn't disturb the user.
The collected statistics will focus on the public-key-verification that
is performed while scanning a QR code. Later on, we can add more
statistics to collect.
**Context:**
_This is just to give a rough idea; I would need to write a lot more
than a few paragraphs in order to fully explain all the context here_.
End-to-end encrypted messengers are generally susceptible to MitM
attacks. In order to mitigate against this, messengers offer some way of
verifying the chat partner's public key. However, numerous studies found
that most popular messengers implement this public-key-verification in a
way that is not understood by users, and therefore ineffective - [a 2021
"State of Knowledge" paper
concludes:](https://dl.acm.org/doi/pdf/10.1145/3558482.3581773)
> Based on our evaluation, we have determined that all current E2EE
apps, particularly when operating in opportunistic E2EE mode, are
incapable of repelling active man-in-the-middle (MitM) attacks. In
addition, we find that none of the current E2EE apps provide better and
more usable [public key verification] ceremonies, resulting in insecure
E2EE communications against active MitM attacks.
This is why Delta Chat tries to go a different route: When the user
scans a QR code (regardless of whether the QR code creates a 1:1 chat,
invites to a group, or subscribes to a broadcast channel), a
public-key-verification is performed in the background, without the user
even having to know about this.
The statistics collected here are supposed to tell us whether Delta Chat
succeeds to nudge the users into using QR codes in a way that is secure
against MitM attacks.
**Plan for statistics-sending:**
- [x] Get this PR reviewed and merged (but don't make it available in
the UI yet; if Android wants to make a release in the meantime, I will
create a PR that removes the option there)
- [x] Set the interval to 1 week again (right now, it's 1 minute for
testing)
- [ ] Write something for people who are interested in what exactly we
count, and link to it (see `TODO[blog post]` in the code)
- [ ] Prepare a short survey for participants
- [ ] Fine-tune the texts at
https://github.com/deltachat/deltachat-android/pull/3794, and get it
reviewed and merged
- [ ] After the next release, ask people to enable the
statistics-sending
Create unprotected group in test_create_protected_grp_multidev
The test is renamed accordingly.
SystemMessage::ChatE2ee is added in encrypted groups
regardless of whether they are protected or not.
Previously new encrypted unprotected groups
had no message saying that messages are end-to-end encrypted
at all.
Ignoring `receive_imf_inner()` errors, i.e. silently skipping messages on failures, leads to bugs
never fixed. As for temporary I/O errors, ignoring them leads to lost messages, in this case it's
better to bubble up the error and get the IMAP loop stuck. However if there's some logic error, it's
better to show it to the user so that it's more likely reported, and continue receiving messages. To
distinguish these cases, on error, try adding the message as partially downloaded with the error set
to `msgs.error`, this way the user also can retry downloading the message to finally see it if the
problem is fixed.
The setting is already removed from the UIs,
but users who had it disabled previously have
no way to enable it. After this change
encryption is effectively always preferred.
Also verify not yet verified contacts w/o setting a verifier for them (in the db it's stored as
`verifier_id=id` though) because we don't know who verified them for another device.
`get_connectivity()` is expected to return immediately, not when the scheduler finishes updating its
state in `start_io()/stop_io()/pause_io()`, otherwise it causes app non-responsiveness.
Instead of read-locking `SchedulerState::inner`, store the `ConnectivityStore` collection in
`Context` and fetch it from there in `get_connectivity()`. Update it every time we release a write
lock on `SchedulerState::inner`.
The info will look like:
```
debug_assertions=On - DO NOT RELEASE THIS BUILD
```
or:
```
debug_assertions=Off
```
I tested that this actually works when compiling on Android.
<details><summary>This is how it looked before the second
commit</summary>
<p>
The deltachat_core_version line in the info will look like:
```
deltachat_core_version=v2.5.0 [debug build]
```
or:
```
deltachat_core_version=v2.5.0 [release build]
```
I tested that this actually works when compiling on Android.
</p>
</details>
A donation request device message is added if >= 100 messages have been sent and delivered. The
condition is checked every 30 days since the first message is sent. The message is added only once.
Add `logged_debug_assert` macro logging a warning if a condition is not satisfied, before invoking
`debug_assert!`, and use this macro where `Context` is accessible (i.e. don't change function
signatures for now).
Follow-up to 0359481ba4.
Save:
- (old contact id) -> (new contact id) mapping.
- The message id starting from which all messages are already migrated.
Run the migration from `housekeeping()` for at least 500 ms and for >= 1000 messages per run.
