UIs may want to display smth like "Transferring..." after "Establishing connection between
devices..." on nonzero progress. Before, progress on the receiver side was starting with 2 after
receiving enough data.
This fixes the HTML display of messages containing forwarded messages. Before, forwarded messages
weren't rendered in HTML and if a forwarded message is long and therefore truncated in the chat, it
could only be seen in the "Message Info". In #4462 it was suggested to display "Show Full
Message..." for each truncated message part and save to `msgs.mime_headers` only the corresponding
part, but this is a quite huge change and refactoring and also it may be good that currently we save
the full message structure to `msgs.mime_headers`, so i'd suggest not to change this for now.
Otherwise the "Show Full Message..." button appears somewhere in the middle of the multipart
message, e.g. after a text in the first message bubble, but before a text in the second
bubble. Moreover, if the second/n-th bubble's text is shortened (ends with "[...]"), the user should
scroll up to click on "Show Full Message..." which doesn't look reasonable. Scrolling down looks
more acceptable (e.g. if the first bubble's text is shortened in a multipart message).
I'd even suggest to show somehow that message bubbles belong to the same multipart message, e.g. add
"[↵]" to the text of all bubbles except the last one, but let's discuss this first.
without the prefix,
it looks as if it is part of the Message-ID,
esp. if Message-ID is longer,
a break on different delimiters may look exactly the same.
see #6329 for some screenshots that initially confused me :)
A user reported to me that after they left a group, they were implicitly readded, but there's no any
readdition message, so currently it looks in the chat like leaving it has no effect, just new
messages continue to arrive. The readdition probably happened because some member didn't receive the
user's self-removal message, anyway, at least there must be a message that the user is readded, even
if it isn't known by whom.
A NDN may arrive days after the message is sent when it's already impossible to tell which message
wasn't delivered looking at the "Failed to send" info message, so it only clutters the chat and
makes the user think they tried to send some message recently which isn't true. Moreover, the info
message duplicates the info already displayed in the error message behind the exclamation mark and
info messages do not point to the message that is failed to be sent.
Moreover it works rarely because `mimeparser.rs` only parses recipients from `x-failed-recipients`,
so it likely only works for Gmail. Postfix does not add this `X-Failed-Recipients` header. Let's
remove this parsing too. Thanks to @link2xt for pointing this out.
This PR:
- Moves the note about the false positive to the end of the test output,
where it is more likely to be noticed
- Also notes in test_modify_chat_disordered() and
test_setup_contact_*(), in addition to the existing note in
test_was_seen_recently()
This fixes HTML display of truncated (long) sent messages ("Show full message" in UIs). Before,
incorrect HTML was stored (with missing line breaks etc.) for them. Now stored plaintext is
formatted to HTML upon calling `MsgId::get_html()` and this results in the same HTML as on a
receiver side.
Also cleaned up test_connectivity()
which tested that state does not flicker to WORKING
when there are no messages to be fetched.
The state is expected to flicker to WORKING
when checking for new messages,
so the tests were outdated since
change 3b0b2379b8
This better reflects that this state means
we just connected and there may me work to do.
This state is converted to DC_CONNECTIVITY_WORKING
instead of DC_CONNECTIVITY_CONNECTED state now.
Before this change when IMAP connected
to the server, it switched
from DC_CONNECTIVITY_NOT_CONNECTED
to DC_CONNECTIVITY_CONNECTING,
then to DC_CONNECTIVITY_CONNECTED (actually preparing)
then to DC_CONNECTIVITY_WORKING
and then to DC_CONNECTIVITY_CONNECTED again (actually idle).
On fast connections this resulted in flickering "Connected"
string in the status bar right before "Updating..."
and on slow connections this "Connected" state
before "Updating..." lasted for a while
leaving the user to wonder if there are no new messages
or if Delta Chat will still switch to "Updating..."
before going into "Connected" state again.
Already apply rust beta (1.84) clippy suggestions now, before they let
CI fail in 6 weeks.
The newly used functions are available since 1.70, our MSRV is 1.77, so
we can use them.
A sync message for accepting or blocking a 1:1 chat may arrive before the first message from the
contact, when it does not exist yet. This frequently happens in non-chatmail accounts that have
moving to the DeltaChat folder disabled because Delta Chat unconditionally uploads sync messages to
the DeltaChat folder. Let's create a hidden contact in this case and a 1:1 chat for it.
this partly reverts experimental #3516
that allowed any .xdc sent to "Saved Messages" to request internet.
this helped on pushing map integration forward.
meanwhile, however, we have that map integration (#5461 and #5678),
that implies `info.internet_access` being set.
experimental `manifest.request_internet_access` is no longer needed therefore.
future will tell, if we revive the option at some point or
go for more intrations ('sending' is discussed often :) -
but currently it is not needed.
with this PR, when an `.xdc` with `request_integration = map` in the
manifest is added to the "Saved Messages" chat, it is used _locally_ as
an replacement for the shipped maps.xdc (other devices will see the
`.xdc` but not use it)
this allows easy development and adapting the map to use services that
work better in some area.
there are lots of known discussions and ideas about adding more barriers
of safety. however, after internal discussions, we decided to move
forward and also to allow internet, if requested by an integration (as
discussed at
https://github.com/deltachat/deltachat-core-rust/pull/3516).
the gist is to ease development and to make users who want to adapt,
actionable _now_, without making things too hard and adding too high
barriers or stressing our own resources/power too much.
note, that things are still experimental and will be the next time -
without the corresponding switch being enabled, nothing will work at
all, so we can be quite relaxed here :)
for android/ios, things will work directly. for desktop, allow_internet
needs to be accepted unconditionally from core. for the future, we might
add a question before using an integration and/or add signing. or sth.
completely different - but for now, the thing is to get started.
nb: "integration" field in the webxdc-info is experimental as well and
should not be used in UIs at all currently, it may vanish again and is
there mainly for simplicity of the code; therefore, no need to document
that.
successor of https://github.com/deltachat/deltachat-core-rust/pull/5461
this is how it looks like currently - again, please note that all that
is an experiment!
<img width=320
src=https://github.com/deltachat/deltachat-core-rust/assets/9800740/f659c891-f46a-4e28-9d0a-b6783d69be8d>
<img width=320
src=https://github.com/deltachat/deltachat-core-rust/assets/9800740/54549b3c-a894-4568-9e27-d5f1caea2d22>
... when going out of experimental, there are loots of ideas, eg.
changing "Start" to "integrate"
this PR adds the `href` from `update.href` to the IncomingWebxdcNotify
event (DC_EVENT_INCOMING_WEBXDC_NOTIFY in cffi)
purpose is to add a "Start" button to the notifications that allow
starting the app immediately with the given href
Text parts are using quoted-printable encoding
which takes care of wrapping long lines,
so using format=flowed is unnecessary.
This improves compatibility with receivers
which do not support format=flowed.
Receiving format=flowed messages is still possible, receiver side of
Delta Chat is unchanged.
- **feat: add `AccountsChanged` and `AccountsItemChanged` events**
- **emit event and add tests**
closes#6106
TODO:
- [x] test receiving synced config from second device
- [x] bug: investigate how to delay the configuration event until it is
actually configured - because desktop gets the event but still shows
account as if it was unconfigured, maybe event is emitted before the
value is written to the database?
- [x] update node bindings constants
this PR removes most usages of the `descr` parameter.
- to avoid noise in different branches etc. (as annoying on similar, at
a first glance simple changes), i left the external API stable
- also, the effort to do a database migration seems to be over the top,
so the column is left and set to empty strings on future updates - maybe
we can recycle the column at some point ;)
closes#6245
add `update.href` property option to update objects send via
`Context::send_webxdc_status_update()`.
when set together with `update.info`,
UI can implement the info message as a link that is passed to the webxdc
via `window.location.href`.
for that purpose, UI will read the link back from
`Message::get_webxdc_href()`.
Practically,
this allows e.g. an calendar.xdc
to emits clickable update messages
opening the calendar at the correct date.
closes#6219
documentation at https://github.com/webxdc/website/pull/90
