Add a stock string `%1$s invited you to join this channel.\n\nWaiting
for the device of %2$s to reply…`, which is shown when a user starts to
join a channel.
I did _not_ add an equivalent to `%1$s replied, waiting for being added
to the group…`, which is shown when vg-auth-required was received. I
don't think that this would add any information that's interesting to
the user, other than 'something is happening, hang on'. And the more
text on the screen, the less likely that anyone reads it. But if others
think differently, we can also add it.
With this PR, joining a channel looks like this:
```
Msg#2003: info (Contact#Contact#Info): Messages are end-to-end encrypted. [NOTICED][INFO]
Msg#2004: info (Contact#Contact#Info): Alice invited you to join this channel.
Waiting for the device of Alice to reply… [NOTICED][INFO]
Msg#2007🔒: (Contact#Contact#2001): You joined the channel. [FRESH][INFO]
```
Fix#7435
For most messages, `calc_sort_timestamp()` makes sure that they are at the correct place; esp. that they are not above system messages or other noticed/seen messages.
Most callers of `add_info_msg()`, however, didn't call `calc_sort_timestamp()`, and just used `time()` or `smeared_time()` to get the sort timestamp. Because of this, system messages could sometimes wrongly be sorted above other messages.
This PR fixes this by making the sort timestamp optional in `add_info_msg*()`. If the sort timestamp isn't passed, then the message is sorted to the bottom of the chat. `sent_rcvd_timestamp` is not optional anymore, because we need _some_ timestamp that can be shown to the user (most callers just pass `time()` there).
Regardless of whether chatmail relay is used or not,
bcc_self should be enabled when second device is added.
It should also be enabled again even if the user
has turned it off manually.
Created new test_folders.py
Moved existing JSON-RPC tests:
- test_reactions_for_a_reordering_move
- test_delete_deltachat_folder
Ported tests:
- test_move_works_on_self_sent
- test_moved_markseen
- test_markseen_message_and_mdn
- test_mvbox_thread_and_trash (renamed to test_mvbox_and_trash)
- test_scan_folders
- test_move_works
- test_move_avoids_loop
- test_immediate_autodelete
- test_trash_multiple_messages
The change also contains fixes for direct_imap fixture
needed to use IMAP IDLE in JSON-RPC tests.
Actually it will be not as breaking if you used the constants, because
this pr also changes the constants.
closes#7029
Note that I had to change the constants from enum to namespace, this has
the side effect, that you can no longer also use the constants as types,
you need to instead prefix them with `typeof ` now.
- sort garbage to the beginning, readable text to the end
- instead of `%20`, make use of `+` to encode spaces
- shorter invite links and smaller QR codes by truncation of the names
the truncation of the name uses chars() which does not respect grapheme clusters, so
that last character may be wrong. not sure if there is a nice and easy
alternative, but maybe it's good engoug - the real, full name will come
over the wire (exiting truncate() truncates on word boundaries, which is
maybe too soft here - names may be long, depending on the language, and
not contain any space)
moreover, this resolves the "name too long" issue from
https://github.com/chatmail/core/issues/7015
---------
Co-authored-by: Hocuri <hocuri@gmx.de>
Follow-up for https://github.com/chatmail/core/pull/7042, part of
https://github.com/chatmail/core/issues/6884.
This will make it possible to create invite-QR codes for broadcast
channels, and make them symmetrically end-to-end encrypted.
- [x] Go through all the changes in #7042, and check which ones I still
need, and revert all other changes
- [x] Use the classical Securejoin protocol, rather than the new 2-step
protocol
- [x] Make the Rust tests pass
- [x] Make the Python tests pass
- [x] Fix TODOs in the code
- [x] Test it, and fix any bugs I find
- [x] I found a bug when exporting all profiles at once fails sometimes,
though this bug is unrelated to channels:
https://github.com/chatmail/core/issues/7281
- [x] Do a self-review (i.e. read all changes, and check if I see some
things that should be changed)
- [x] Have this PR reviewed and merged
- [ ] Open an issue for "TODO: There is a known bug in the securejoin
protocol"
- [ ] Create an issue that outlines how we can improve the Securejoin
protocol in the future (I don't have the time to do this right now, but
want to do it sometime in winter)
- [ ] Write a guide for UIs how to adapt to the changes (see
https://github.com/deltachat/deltachat-android/pull/3886)
## Backwards compatibility
This is not very backwards compatible:
- Trying to join a symmetrically-encrypted broadcast channel with an old
device will fail
- If you joined a symmetrically-encrypted broadcast channel with one
device, and use an old core on the other device, then the other device
will show a mostly empty chat (except for two device messages)
- If you created a broadcast channel in the past, then you will get an
error message when trying to send into the channel:
> The up to now "experimental channels feature" is about to become an officially supported one. By that, privacy will be improved, it will become faster, and less traffic will be consumed.
>
> As we do not guarantee feature-stability for such experiments, this means, that you will need to create the channel again.
>
> Here is what to do:
> • Create a new channel
> • Tap on the channel name
> • Tap on "QR Invite Code"
> • Have all recipients scan the QR code, or send them the link
>
> If you have any questions, please send an email to delta@merlinux.eu or ask at https://support.delta.chat/.
## The symmetric encryption
Symmetric encryption uses a shared secret. Currently, we use AES128 for
encryption everywhere in Delta Chat, so, this is what I'm using for
broadcast channels (though it wouldn't be hard to switch to AES256).
The secret shared between all members of a broadcast channel has 258
bits of entropy (see `fn create_broadcast_shared_secret` in the code).
Since the shared secrets have more entropy than the AES session keys,
it's not necessary to have a hard-to-compute string2key algorithm, so,
I'm using the string2key algorithm `salted`. This is fast enough that
Delta Chat can just try out all known shared secrets. [^1] In order to
prevent DOS attacks, Delta Chat will not attempt to decrypt with a
string2key algorithm other than `salted` [^2].
## The "Securejoin" protocol that adds members to the channel after they
scanned a QR code
This PR uses the classical securejoin protocol, the same that is also
used for group and 1:1 invitations.
The messages sent back and forth are called `vg-request`,
`vg-auth-required`, `vg-request-with-auth`, and `vg-member-added`. I
considered using the `vc-` prefix, because from a protocol-POV, the
distinction between `vc-` and `vg-` isn't important (as @link2xt pointed
out in an in-person discussion), but
1. it would be weird if groups used `vg-` while broadcasts and 1:1 chats
used `vc-`,
2. we don't have a `vc-member-added` message yet, so, this would mean
one more different kind of message
3. we anyways want to switch to a new securejoin protocol soon, which
will be a backwards incompatible change with a transition phase. When we
do this change, we can make everything `vc-`.
[^1]: In a symmetrically encrypted message, it's not visible which
secret was used to encrypt without trying out all secrets. If this does
turn out to be too slow in the future, then we can remember which secret
was used more recently, and and try the most recent secret first. If
this is still too slow, then we can assign a short, non-unique (~2
characters) id to every shared secret, and send it in cleartext. The
receiving Delta Chat will then only try out shared secrets with this id.
Of course, this would leak a little bit of metadata in cleartext, so, I
would like to avoid it.
[^2]: A DOS attacker could send a message with a lot of encrypted
session keys, all of which use a very hard-to-compute string2key
algorithm. Delta Chat would then try to decrypt all of the encrypted
session keys with all of the known shared secrets. In order to prevent
this, as I said, Delta Chat will not attempt to decrypt with a
string2key algorithm other than `salted`
BREAKING CHANGE: A new QR type AskJoinBroadcast; cloning a broadcast
channel is no longer possible; manually adding a member to a broadcast
channel is no longer possible (only by having them scan a QR code)
This is similar to old `dcaccount:` with URL,
but creates a 9-character username on the client
and avoids making an HTTPS request.
The scheme is reused to avoid the apps
needing to register for the new scheme.
`http` support is removed because it was
not working already, there is a check
that the scheme is `https` when the URL
is actually used and the core has
no way to make HTTP requests without TLS.
Create unprotected group in test_create_protected_grp_multidev
The test is renamed accordingly.
SystemMessage::ChatE2ee is added in encrypted groups
regardless of whether they are protected or not.
Previously new encrypted unprotected groups
had no message saying that messages are end-to-end encrypted
at all.
This mechanism replaces `Chat-Verified` header.
New parameter `_verified=1` in `Autocrypt-Gossip`
header marks that the sender has the gossiped key
verified.
Using `_verified=1` instead of `_verified`
because it is less likely to cause troubles
with existing Autocrypt header parsers.
This is also how https://www.rfc-editor.org/rfc/rfc2045
defines parameter syntax.
MX record lookup was only used to detect Google Workspace domains.
They can still be configured manually.
We anyway do not want to encourage creating new profiles
with Google Workspace as we don't have Gmail OAUTH2 token anymore
and new users can more easily onboard with a chatmail relay.
I have not updated Python interpreters for legacy bindings
in scripts/run_all.sh because I have not checked
if manylinux images already exist and work for building wheels.
Legacy Python bindings are deprecated
and we don't publish new releases for them.
