Also change how NO response is treated. NO response means there is an
error moving/copying the messages. When there are no matching
messages, the response is "OK No matching messages, so nothing copied"
according to some RFC 9051 examples.
- do not attempt to mark reserved meessages as seen when
messages with empty Message-ID are marked as seen on IMAP
- do not reconnect on Seen flag synchronization failures This avoid
reconnection loops in case of permanent errors in `sync_seen_flags`
* Make set_config() look a bit nicer
* Add OnlyFetchMvbox option
* Add test for the config
* Add option to only watch mvbox
This is supposed to support having a server-side rule which moves
emails to the mvbox already. The new option makes sure the mvbox is
wathched and also makes sure no messages are feched from folders other
than the mvbox and the spam folder if enabled. It does not interact
with the other settings.
* Fixup ignore conditions
* Cleanup some bits
* Watch the mvbox when `WatchMvboxOnly` is set
* Rename back to only_fetch_mvbox (flub said it's OK for him)
* typo
* clippy, more typos
Co-authored-by: Hocuri <hocuri@gmx.de>
Synchronizing seen flags doubles the time required to scan all
folders. Delta Chat only marks messages as Seen on Inbox or DeltaChat,
so there is no need to check for Seen flag on other folders.
This operation takes roughly 0.3 s on a moderate size database.
Calling it once before scanning all folders and scanning
the watched folder instead of each time after downloading
a message from a folder speeds up IMAP loop.
This operation takes roughly 0.3 s on a moderate size database.
Calling it once before scanning all folders and scanning
the watched folder instead of each time after downloading
a message from a folder speeds up IMAP loop.
- Replace .ok_or_else() and .map_err() with anyhow::Context where possible.
- Use .context() to check Option for None when it's an error
- Resultify Chatlist.get_chat_id()
- Add useful .context() to some errors
- IMAP error handling cleanup
Seen status is only synchronized on servers supporting IMAP CONDSTORE
extension. At the end of fetch loop iteration, flags are fetched for
all messages modified since previous synchronization and highest
modification sequence is stored into `imap_sync` table.
We had an unhelpful log in the Testing group:
- it repeatedly says "src/imap.rs:1010: dc_receive_imf error: add_parts error" but the actual error is not shown
- it says "deltachat-ffi/src/lib.rs:186: dc_get_config(): invalid key" but it doesn't say what key it's trying to set
`imap` table maps Message-IDs to UIDs on the server. `dc_receive_imf`
no longer gets the UID of the message as an argument and does not
insert the folder and UID of the message into the `msgs`
table. `server_folder` and `server_uid` columns in `msgs` table are
deprecated.
MoveMsg and DeleteMsgOnImap jobs are removed. Now messages are moved
and deleted only in the `fetch_move_delete` procedure that consults
the `target` column of the `imap` table to determine where the message
should go.
Where the message should go is determined after prefetching by the
`imap::target_folder()` procedure. Messages are only downloaded once
they reach their target folder to avoid race conditions in multidevice
setting, such as:
1. One device trying to FETCH the message while the other tries to
MOVE it.
2. One device marking the message as \Seen in the Inbox while the
other has already copied unseen message to the Movebox and is going to
delete the \Seen message in the Inbox.
3. Device downloads the message from the Inbox while there are newer
messages in the Movebox placed there by the other device, thus
processing the messages out of order.
When there is an outgoing message in a chat, mark all older messages in this chat as seen.
Android already has a similar behavior, however, this led to the issue https://github.com/deltachat/deltachat-android/issues/2163 and should be changed back.
--
From the issue description at https://github.com/deltachat/deltachat-android/issues/2163, I implemented these fixes:
> Core should take care that if the last message in a chat is not fresh|noticed, no messages in the chat can be fresh. [...] Do this [...] in a function that's called at the end of fetch_new_messages(). Then dc_receive_imf() wouldn't get slower by this and we could re-use the same function for migration.
So, I didn't do this inside `dc_receive_imf()` in order not to make it take even longer. This obviously has the downside of higher complexity.
And I think we should implement this:
> On Androd, show the unread badge when unread!=0 again (see deltachat/deltachat-android@618af02). Then the user can see that there is a chat with an unread message and click it to get rid of it.
because it shouldn't be the UI's job to decide whether an unread badge is shown, but the core's.
Generally we could also just remove the device message as we have the
connectivity view, OTOH if you are not using DC a lot, it may be useful
to be notified without opening DC.
And apart from this one bug it's working fine.
* draft a download-api
* basic implementation
* allow partial downloads for protected chats
* use a separate column for download_state
* force a minimal timeout for delete_server_after in combination with partial messages
* add a warning if a possible download may expire by delete_server_after
* test load_imap_deletion_msgid()
* add a test for a partial download
* improve documentation and visibility
* let get_download_limit() return Result<Option>
* rusty getters
* apply MIN_DELETE_SERVER_AFTER to shown availability time
* move stub-creation to download.rs, use stock-strings, nicer logging
* make clippy happy (cargo clippy --tests)
* refine tests and comments
* fix typo
* remove superfluous closure in ffi
* respect partial_download for immediately scheduled DeleteMsgOnImap jobs
There is a real risk of an active attack when connecting to non-.onion
servers over Tor, as bad Tor exit nodes are cheap to set up.
It's probably not needed for .onion domains, but we don't make an
exception for now.
This adds following settings:
- Socks5Enabled
- Socks5Host
- Socks5Port
- Socks5User
- Socks5Password
Currently http requests and dns requests are not getting executed as they currently can't get tunneled through socks5 proxy. Therefore gmail with oauth2 wont work through tor.
* add imap::get_quota_roots()
* schedule quote-checking job on getting connectivity-html
* get quota and debug print it
* basic quota output
* update quota at most once per minute, emit event on changes
* use more meaningful names
* add some comments, move update_recent_quota() to quota.rs
* show root name only if there are several roots
* make clippy happy, some refactorings
* allow only one update-quota job per time
* add now supported QUOTA to standards.md
See https://support.delta.chat/t/discussion-how-to-show-error-states/1363/10 <!-- comment -->
It turns out that it's pretty easy to distinguish between lots of states (currently Error/NotConnected, Connecting…, Getting new messages… and Connected). What's not that easy is distinguishing between an actual error and no network, because if the server just doesn't respond, it could mean that we don't have network or that we are trying ipv6, but only ipv4 works.
**WRT debouncing:**
Sending of EVENT_CONNECTIVITY_CHANGED is not debounced, but emitted every time one of the 3 threads (Inbox, Mvbox and Sentbox) has a network error, starts fetching data, or is done fetching data.
This means that it is emitted:
- 9 times when dc_maybe_network() is called or we get network connection
- 12 times when we lose network connection
Some measurements: dc_get_connectivity() takes a little more than 1ms (in my measurements back in March), dc_get_connectivity_html() takes 10-20ms. This means that it's no immmediate problem to call them very often, might increase battery drain though. For the UI it may be a lot of work to update the title everytime; at least Android is smart enough to update the title only once.
Possible problems (we don't have to worry about them now I think):
- Due to the scan_folders feature, if the user has lots of folders, the state could be "Connecting..." for quite a long time, generally DC seemed a little unresponsive to me because it took so long for "Connecting..." to go away. Telegram has a state "Updating..." that sometimes comes after "Connecting...".
To be done in other PRs:
- Better handle the case that the password was changed on the server and authenticating fails, see https://github.com/deltachat/deltachat-core-rust/issues/1923 and https://github.com/deltachat/deltachat-core-rust/issues/1768
- maybe event debouncing (except for "Connected" connectivity events)
fix https://github.com/deltachat/deltachat-android/issues/1760
`Imap` structure is always created in a configured state now. There is
no default value for `ImapConfig` anymore.
Also resultify Scheduler::start() to fail on database errors, for
example if IMAP configuration cannot be read from the database during
`start_io()`. Previosuly errors during reading keys such as
`mvbox_watch` were simply ignored and folders were not watched until
the application is completely restarted, now start_io() will fail and
scheduler will only be started at the next start_io() call which
usually happens when app is brought to the foreground.
* Add failing test for #2369
* Completely ignore Drafts folder
fix#2369
* Also ignore messages that have the Draft flag set but are not in the Drafts folder
The problem was:
If a message has the \Deleted flag set, we ignore it. But we forgot to
update last_uid, so that uid_next was not updated at 47e639b777/src/imap.rs (L730) and the same message was
fetched over and over again.
Fix#2429
Using `impl AsRef<str>` as the argument instead of `&str` makes it
possible to call the function with `&str`, `String` and other types
that implement `AsRef` trait.
The cost of it is that compiled binary contains mulitple versions of
the same function, one for each variant of types. If function contains
multiple generic `impl AsRef` arguments, the number of versions possibly
compiled into binary grows exponentially with the number of arguments.
Simple way to avoid it is to call `.as_ref()` on the caller side to
convert the argument to `&str`. In most cases even adding a `&` and
relying on `Deref` coercion is sufficient.
This patch changes many functions that accepted `impl AsRef<str>` and
`impl AsRef<Path>` to accept `&str` and `&Path` instead.
In some places `.clone()` calls are removed. Calling `.clone()` on
`String` and passing `String` to a function accepting `impl
AsRef<str>` is completely unnecessary as `&str` reference could be
passed instead. There is no clippy warning against it yet, but
changing argument type to `&str` allowed to find these cases.
The result of debloating is not impressive, several hundred kilobytes
are saved, which is about 3% of the `.so` binary, but the code is
cleaner too.
