Encrypted message may create unencrypted groups
if the message does not have a Chat-Group-ID.
This can happen if v1 client sends an encrypted
message to opportunistically encrypted ad hoc group.
In this case `from_id` corresponds to the key-contact,
but we should add address-contact of the sender
to the member list.
This adds a test for https://github.com/chatmail/core/pull/7032/.
The crash happened if you received a message that has the from contact
also in the "To: " and "Chat-Group-Member-Fpr: " headers. Not sure how
it happened that such a message was created; I managed to create one in
a test, but needed to access some internals of MimeFactory for that.
I then saved the email that is sent by Alice into the test-data
directory, and then made a test that Bob doesn't crash if he receives
this email. And as a sanity-check, also test that Bob marks Fiona as
verified after receiving this email.
this PR adds a info message "messages are end-to-end-encrypted" also for
chats created by eg. vcards. by the removal of lock icons, this is a
good place to hint for that in addition; this is also what eg. whatsapp
and others are doing
the wording itself is tweaked at
https://github.com/deltachat/deltachat-android/pull/3817 (and there is
also the rough idea to make the message a little more outstanding, by
some more dedicated colors)
~~did not test in practise, if this leads to double "e2ee info messages"
on secure join, tests look good, however.~~ EDIT: did lots of practise
tests meanwhile :)
most of the changes in this PR are about test ...
ftr, in another PR, after 2.0 reeases, there could probably quite some
code cleanup wrt set-protection, protection-disabled etc.
---------
Co-authored-by: Hocuri <hocuri@gmx.de>
Part of #6884.
The channel owner will not be notified in any way that you left, they
will only see that there is one member less.
For the translated stock strings, this is what we agreed on in the
group:
- Add a new "Leave Channel" stock string (will need to be done in UIs)
- Reword the existing "Are you sure you want to leave this group?"
string to "Are you sure you want to leave?" (the options are "Cancel"
and "Leave Group" / "Leave Channel", so it's clear what you are leaving)
(will need to be done in the deltachat-android repo, other UIs will pick
it up automatically)
- Reword the existing "You left the group." string to "You left". (done
here, I will adapt the strings in deltachat-android, too)
I adapted DC Android by pushing
6df2740884
to https://github.com/deltachat/deltachat-android/pull/3783.
---------
Co-authored-by: l <link2xt@testrun.org>
BREAKING CHANGE: messages with invalid images, images of unknown size,
huge images, will have Viewtype::File
After changing the logic of Viewtype selection, I had to fix 3 old tests
that used invalid Base64 image data.
Co-authored-by: iequidoo <117991069+iequidoo@users.noreply.github.com>
This change introduces a new type of contacts
identified by their public key fingerprint
rather than an e-mail address.
Encrypted chats now stay encrypted
and unencrypted chats stay unencrypted.
For example, 1:1 chats with key-contacts
are encrypted and 1:1 chats with address-contacts
are unencrypted.
Groups that have a group ID are encrypted
and can only contain key-contacts
while groups that don't have a group ID ("adhoc groups")
are unencrypted and can only contain address-contacts.
JSON-RPC API `reset_contact_encryption` is removed.
Python API `Contact.reset_encryption` is removed.
"Group tracking plugin" in legacy Python API was removed because it
relied on parsing email addresses from system messages with regexps.
Co-authored-by: Hocuri <hocuri@gmx.de>
Co-authored-by: iequidoo <dgreshilov@gmail.com>
Co-authored-by: B. Petersen <r10s@b44t.com>
instead of showing addresses in info message, provide an API to get the
contact-id.
UI can then make the info message tappable and open the contact profile
in scope
the corresponding iOS PR - incl. **screencast** - is at
https://github.com/deltachat/deltachat-ios/pull/2652 ; jsonrpc can come
in a subsequent PR when things are settled on android/ios
the number of parameters in `add_info_msg_with_cmd` gets bigger and
bigger, however, i did not want to refactor this in this PR. it is also
not really adding complexity
closes#6702
---------
Co-authored-by: link2xt <link2xt@testrun.org>
Co-authored-by: Hocuri <hocuri@gmx.de>
This implements new group consistency algorithm described in
<https://github.com/deltachat/deltachat-core-rust/issues/6401>
New `Chat-Group-Member-Timestamps` header is added
to send timestamps of member additions and removals.
Member is part of the chat if its addition timestamp
is greater or equal to the removal timestamp.
A user reported to me that after they left a group, they were implicitly readded, but there's no any
readdition message, so currently it looks in the chat like leaving it has no effect, just new
messages continue to arrive. The readdition probably happened because some member didn't receive the
user's self-removal message, anyway, at least there must be a message that the user is readded, even
if it isn't known by whom.
with this PR, when an `.xdc` with `request_integration = map` in the
manifest is added to the "Saved Messages" chat, it is used _locally_ as
an replacement for the shipped maps.xdc (other devices will see the
`.xdc` but not use it)
this allows easy development and adapting the map to use services that
work better in some area.
there are lots of known discussions and ideas about adding more barriers
of safety. however, after internal discussions, we decided to move
forward and also to allow internet, if requested by an integration (as
discussed at
https://github.com/deltachat/deltachat-core-rust/pull/3516).
the gist is to ease development and to make users who want to adapt,
actionable _now_, without making things too hard and adding too high
barriers or stressing our own resources/power too much.
note, that things are still experimental and will be the next time -
without the corresponding switch being enabled, nothing will work at
all, so we can be quite relaxed here :)
for android/ios, things will work directly. for desktop, allow_internet
needs to be accepted unconditionally from core. for the future, we might
add a question before using an integration and/or add signing. or sth.
completely different - but for now, the thing is to get started.
nb: "integration" field in the webxdc-info is experimental as well and
should not be used in UIs at all currently, it may vanish again and is
there mainly for simplicity of the code; therefore, no need to document
that.
successor of https://github.com/deltachat/deltachat-core-rust/pull/5461
this is how it looks like currently - again, please note that all that
is an experiment!
<img width=320
src=https://github.com/deltachat/deltachat-core-rust/assets/9800740/f659c891-f46a-4e28-9d0a-b6783d69be8d>
<img width=320
src=https://github.com/deltachat/deltachat-core-rust/assets/9800740/54549b3c-a894-4568-9e27-d5f1caea2d22>
... when going out of experimental, there are loots of ideas, eg.
changing "Start" to "integrate"
I.e. add the "Messages are guaranteed to be end-to-end encrypted from now on." message and mark the
chat as protected again because no user action is required in this case. There are a couple of
problems though:
- If the program crashes earlier than the protection is restored, the chat remains
protection-broken. But this problem already exists because `ChatId::set_protection()` is never
retried.
- If multiple old unverified messages are received, protection messages added in between don't
annihilate, so they clutter the chat.
If a message from an old contact's setup is received, the outdated Autocrypt header isn't applied,
so the contact verification preserves. But the chat protection breaks because the old message is
sorted to the bottom as it mustn't be sorted over the protection info message (which is `InNoticed`
moreover). Would be nice to preserve the chat protection too e.g. add a "protection broken" message,
then the old message and then a new "protection enabled" message, but let's record the current
behaviour first.
Received messages shouldn't mingle with just sent ones and appear somewhere in the middle of the
chat, so we go after the newest non fresh message.
But if a received outgoing message is older than some `InSeen` message, better sort the received
message purely by timestamp (this is an heuristic in order not to break the Gmail-like case
simulated by `verified_chats::test_old_message_4()`). We could place the received message just
before that `InSeen` message, but anyway the user may not notice it.
At least this fixes outgoing messages sorting for shared accounts where messages from other devices
should be sorted the same way as incoming ones.
This reverts commit 1caf672904.
Otherwise public key signature is regenerated each time the key is
loaded and test `key::tests::test_load_self_existing` which loads the
key twice fails when two loads happen on different seconds.
Closes#5976
Otherwise it's impossible to remove a member with missing key from a protected group. In the worst
case a removed member will be added back due to the group membership consistency algo.
Otherwise, e.g. if a message is a large GIF, but its viewtype is set to `Image` by the app, this GIF
will be recoded to JPEG to reduce its size. GIFs and other special viewtypes must be always detected
and sent as is.
as discussed in several chats, this PR starts making it possible to use
Webxdc as integrations to the main app. In other word: selected parts of
the main app can be integrated as Webxdc, eg. Maps [^1]
this PR contains two parts:
- draft an Webxdc Integration API
- use the Webxdc Integration API to create a Maps Integration
to be clear: a Webxdc is not part of this PR. the PR is about marking a
Webxdc being used as a Map - and core then feeds the Webxdc with
location data. from the view of the Webxdc, the normal
`sendUpdate()`/`setUpdateListener()` is used.
things are still marked as "experimental", idea is to get that in to
allow @adbenitez and @nicodh to move forward on the integrations into
android and desktop, as well as improving the maps.xdc itself.
good news is that we currently can change the protocol between Webxdc
and core at any point :)
# Webxdc Integration API
see `dc_init_webxdc_integration()` in `deltachat.h` for overview and
documentation.
rust code is mostly in `webxdc/integration.rs` that is called by other
places as needed. current [user of the API is
deltachat-ios](https://github.com/deltachat/deltachat-ios/pull/1912),
android/desktop will probably follow.
the jsonrpc part is missing and can come in another PR when things are
settled and desktop is really starting [^2] (so we won't need to do all
iterations twice :) makes also sense, when this is done by someone
actually trying that out on desktop
while the API is prepared to allow other types of integrations (photo
editor, compose tools ...) internally, we currently ignore the type. if
that gets more crazy, we probably also need a dedicated table for the
integrations and not just a single param.
# Maps Integration
rust code is mostly in `webxdc/maps_integration.rs` that is called by
`webxdc/integration.rs` as needed.
EDIT: the idea of having a split here, is that
`webxdc/maps_integration.rs` really can focus on the json part, on the
communication with the .xdc, including tests
this PR is basic implementation, enabling to move forward on
integrations on iOS, but also on desktop and android.
the current implementation allows already the following:
- global and per-chat maps
- add and display POIs
- show positions and tracks of the last 24 hours
the current maps.xdc uses leaflet, and is in some regards better than
the current android/desktop implementations (much faster, show age of
positions, fade out positions, always show names of POIs, clearer UI).
however, we are also not bound to leaflet, it can be anything
> [**screenshots of the current
state**](https://github.com/deltachat/deltachat-ios/pull/1912)
> 👆
to move forward faster and to keep this PR small, the following will go
to a subsequent PR:
- consider allowing webxdc to use a different timewindow for the
location
- delete POIs
- jsonrpc
[^1]: maps are a good example as anyways barely native (see android
app), did cause a lot of pain on many levels in the past (technically,
bureaucratically), and have a comparable simple api
[^2]: only going for jsonrpc would only make sense if large parts of
android/ios would use jsonrpc, we're not there
---------
Co-authored-by: link2xt <link2xt@testrun.org>
Let's add a 1-minute tolerance to `Params::MemberListTimestamp`.
This adds to the group membership consistency algo the following properties:
- If remote group membership changes were made by two members in parallel, both of them are applied,
no matter in which order the messages are received.
- If we remove a member locally, only explicit remote member additions/removals made in parallel are
allowed, but not the synchronisation of the member list from "To". Before, if somebody managed to
reply earlier than receiving our removal of a member, we added it back which doesn't look good.
Currently when a user sets up another device by logging in, a new key is created. If a message is
sent from either device outside, it cannot be decrypted by the other device.
The message is replaced with square bracket error like this:
```
<string name="systemmsg_cannot_decrypt">This message cannot be decrypted.\n\n• It might already help to simply reply to this message and ask the sender to send the message again.\n\n• If you just re-installed Delta Chat then it is best if you re-setup Delta Chat now and choose "Add as second device" or import a backup.</string>
```
(taken from Android repo `res/values/strings.xml`)
If the message is outgoing, it does not help to "simply reply to this message". Instead, we should
add a translatable device message of a special type so UI can link to the FAQ entry about second
device. But let's limit such notifications to 1 per day. And as for the undecryptable message
itself, let it go to Trash if it can't be assigned to a chat by its references.
In particular TLSRPT reports
contain files that may be interesting for admins.
Currently Delta Chat drops the attachment
so message appears as a text message without actual payload.
Before this fix actual contents of the message
reposted by Schleuder is considered a mailing list footer and removed,
not visible even in the "Show Full Message..." view.
With this change there will be two message bubbles,
one for header and one for the contents,
but it is still better than losing the contents completely.
Attempting to parse header part is out of scope for this change.
Put a copy of Message-ID into hidden headers and prefer it over the one in the IMF header section
that servers mess up with.
This also reverts "Set X-Microsoft-Original-Message-ID on outgoing emails for amazonaws (#3077)".
