A second background_fetch() while one is already running returned
without emitting the event, and the FFI returned 1 for it,
so a UI waiting for an event hangs dc_get_next_event().
Emit the event in any case, so waiting for it is safe.
With I/O stopped, `background_fetch()` connected only to the transport of `configured_addr`
and we now instead fan out to all transports in a controlled loop.
If a first transport finished fetching new messages
cancel all other attempts and return.
This is meant to address the problem that amzd described
where a profile with one functioning and one hanging transport,
shows the first notification, then hangs 15 seconds waiting for the hanging transport.
meanwhile a second NSE arrives and dies, and the second message is not notified
or only generically.
Also drop the quota check from this background fetch path:
its result is in-memory only, discarded when the iOS notification service exits,
and the regular scheduler fetching refreshes it every 60s anyway.
Moreover, quota errors/running full is pretty rare
since relays generally automatically stay under quota these days.
It's another round trip for each transport of each profile and simply not necessary.
Also adds previously missing online tests.
Removing a relay now takes effect immediately:
- the profile stops fetching and advertising it,
- secondary devices immediately apply the removal through the transport sync,
Upgrading removes unpublished relays and triggers keyupdates.
BREAKING CHANGE: set_transport_unpublished() is removed: UIs call delete_transport() when the user removes a relay.
BREAKING CHANGE: list_transports_ex() and the TransportListEntry type are removed: use list_transports().
BREAKING CHANGE: delete_transport() no longer refuses to remove the primary transport: it refuses only to remove the last one and re-elects the sending transport as needed.
BREAKING CHANGE: TransportsModified is now also emitted on the device modifying the transports, not only on devices applying the synced change.
Deprecated: DC_STR_PHASING_OUT
Authentication failures may happen because of internal server errors.
Device message saying "Please check if the email address and the password are correct"
was written for classic email setups when the user knows the password.
For users of chatmail relays this message is not actionable,
but still appears when relay fails to check the password.
it is outdated and incomplete, and always was experimental.
it is not in use in any UI but to get the name of the chat in Ubuntu
Touch, i created an issue for that at
https://codeberg.org/lk108/deltatouch/issues/305
moreover it is used for python bindings as get_summary(), not sure how
much that is in use,
we can leave the API for that for now, but we should not encourage
further usage of the API
---------
Co-authored-by: adb <adb@merlinux.eu>
The chat is always going to be encrypted, this is enough.
We actually do mark the contact as verified,
but the meaning of this verification is unclear
and we don't even display it visibly in the chat anymore.
Adds following stock strings:
- You were removed by %1$s.
- You were added by %1$s.
and implicit equivalents:
- You were removed.
- You were added.
Closes: #8419
Signed-off-by: Jagoda Ślązak <jslazak@jslazak.com>
this PR, created together with @adbenitez, improves the connectivity
state passed to UI, which has changed a lot since multi relay:
- change the algorithm for `get_connectivity()`: this is roughly the
"best" connectivity of all relays now, so if one is connected, we're
already fine. this was discussed widely one to one, and that part
already closes#8554
- the PR adds a test for that, previously, that was untested
- additionally, do not regard unpublished relays in
`get_connectivity()`: e.g. unpublished relays are no longer given to
peers - so if only that is connected, the overall state should not be
"connected". therefore, we just ignore unpublished relays there
- in `get_connectivity_html()`, we continue showing unpublished relays,
however, we tune them down visually and flag them as such
- for the docs, remove the "range for some future use" wording. it was
never used like that, and that future will probably not arrive :)
<img width="320"
src="https://github.com/user-attachments/assets/1805c525-72d1-4197-b865-6e2d6fbc8819"
/>
---------
Co-authored-by: Hocuri <hocuri@gmx.de>
Unifies internal naming of single/direct/1:1/normal chats
to match the naming used in the API.
Closes: #8368
Signed-off-by: Jagoda Ślązak <jslazak@jslazak.com>
---------
Signed-off-by: Jagoda Ślązak <jslazak@jslazak.com>
BREAKING CHANGE: provider lookup APIs were removed from CFFI and JSON-RPC.
also removes offline provider database code and generated provider data,
provider-specific fields in configure/transport paths, and REPL providerinfo.
Heartbeat notifications are only used on iOS for classic mail servers
but both code and privacy wise (notification server sees IP addresses from those users)
not something we want to support any longer (was discussed with bjoern).
BREAKING CHANGE: removed oauth2 module, dc_get_oauth2_url FFI function, DC_LP_AUTH flags and configured/serverflags, and the oauth2 parameter/field from SMTP/IMAP clients, JSON-RPC interfaces, and CLI tools.
also contains regenerated provider data after dropping oauth in the update script.
BREAKING CHANGE: UIs should not behave differently for chatmail relays than for classical email servers; most usages of `is_chatmail` can be replaced by `force_encryption`
Fix https://github.com/chatmail/core/issues/8195
Supersedes https://github.com/chatmail/core/pull/8217
The most interesting change is in `delete_expired_imap_messages()`
because there, messages are marked for deletion on single-device
chatmail profiles.
The logic in `delete_expired_imap_messages()` was wrong before, and
pre-messages were not deleted at all. This is fixed by also querying
`pre_rfc724_mid` in addition to `rfc724_mid` from the `msgs` table.
In order not to make the SQL statement too complex, I split it into two.
WRT tests:
- `test_immediate_autodelete()` tests the auto-deletion;
`test_imap_autodelete_fully_downloaded_msg()` tests that even for a
message that is split into pre- and post-message, both messages are
deleted.
- A lot of tests test that if bcc_self is on, messages are not
auto-deleted. E.g. `test_one_account_send_bcc_setting()` and
`test_markseen_message_and_mdn()` relies on the fact that messages stay
on the server when bcc_self is on.
- Unfortunately, it is not possible to test that messages are only
deleted for chatmail servers, because we don't have any tests that use a
non-chatmail server.
This also solves the problem with the fact that
it's not clear from the resulting HTML
that this error message is referring to quota and not something else.
See https://github.com/chatmail/core/pull/8130.
`OutPreparing` is deprecated since 2024-12-07, replace it with `OutFailed`, such messages are
probably not interesting anymore. `OutMdnRcvd` is not used in the db for new messages since
a30c6ae1f7, `OutDelivered` is stored instead.
Remove unused info_only option from `get_chat_msgs_ex()`.
This option was meant to show an "audit log" of a group, i.e. only the
info messages. This feature was removed again from Desktop, but the
option still lingered around in Core.
This also adds a doc comment to the JsonRPC functions, because I
wanted to note somewhere that the parameter is deprecated, and I needed
some place to put this note.
Closes https://github.com/chatmail/core/issues/7980.
Unpublished transports are not advertised to contacts, and self-sent messages are not sent there, so that we don't cause extra messages to the corresponding inbox, but can still receive messages from contacts who don't know the new relay addresses yet.
- This adds `list_transports_ex()` and `set_transport_unpublished()` JsonRPC functions
- By default, transports are published, but when updating, all existing transports except for the primary one become unpublished in order not to break existing users that followed https://delta.chat/legacy-move
- It is not possible to unpublish the primary transport, and setting a transport as primary automatically sets it to published
An alternative would be to change the existing list_transports API rather than adding a new one list_transports_ex. But to be honest, I don't mind the _ex prefix that much, and I am wary about compatibility issues. But maybe it would be fine; see b08ba4bb8 for how this would look.
this adds an api to make the newest incoming message of a chat as "fresh",
so that UI can offer a "mark chat unread" option as usual for messengers
(eg. swipe right on iOS toggels between "read" and "unread").
"mark unread" is one of the most requested missing features,
used by many ppl to organize their every day messenger usage -
tho "pinning" and "saved messages" are similar,
it seems to be missed often.
we follow a very simple approach here
and just reset the state to `MessageState::InFresh`.
this does not introduce new states or flows.
therefore, chats without any incoming message cannot be marked as fresh.
in practise, this is probably not really an issue,
as the "mark fresh" is usually used to undo a "mark noticed" operation -
and then you have incoming message.
also, most status messages as "all messages are e2ee" count as incoming.
to avoid double sending of MDN,
we remove `Param::WantsMdn` once the MDN is scheduled.
in case MDN are used for syncing, MDN is still sent as before.
many other messenger show a "badge without number",
if we want that as well,
we can always track the "manually set as fresh" state in a parameter.
but for now, it is fine without and showing a "1", which alsso makes sense as badges may be summed up.
there is an iOS pr that uses this new feature,
jsonrpc is left out until api is settled.
also out of scope is synchronisation -
main reason is that "mark noticed" is not synced as well, so we avoid an imbalance here.
both, "mark noticed" as well as "mark fresh" should be synced however,
as soon as this feature is merged.
encryption info needs a dedicated string for "Messages are end-to-end encrypted"
as the UI will add more infomation to the info messages,
smth. as "Tap for more information".
an alternative fix would have been to let the UI render the info-message
differently, but adding another string to core causes less friction.
fix https://github.com/chatmail/core/issues/7766
Implementation notes:
- Descriptions are only sent with member additions, when the description
is changed, and when promoting a previously-unpromoted group, in order
not to waste bandwith.
- Descriptions are not loaded everytime a chat object is loaded, because
they are only needed for the profile. Instead, they are in their own
table, and can be loaded with their own JsonRPC call.
---------
Co-authored-by: iequidoo <117991069+iequidoo@users.noreply.github.com>
this PR cleans up with some easy, deprecated stuff.
i roughly checked that they are no longer in use - by these checks,
other deprecated function were kept, eg.
dc_provider_new_from_email_with_dns() and dc_chat_is_protected() is
still used by deltatouch - to not add noise there, we remove them here
on the next cleanup ...
for DC_STR_*, however, if they are in used, the corresponding lines
should just be removed
this will cleanup https://c.delta.chat/deprecated.html as well
