Message.set_text() and Message.get_text() are modified accordingly
to accept String and return String.
Messages which previously contained None text
are now represented as messages with empty text.
Use Message.set_text("".to_string())
instead of Message.set_text(None).
get_chat_msgs() function is split into new get_chat_msgs() without flags
and get_chat_msgs_ex() which accepts booleans instead of bitflags.
FFI call dc_get_chat_msgs() is still using bitflags for compatibility.
JSON-RPC calls get_message_ids() and get_message_list_items()
accept booleans instead of bitflags now.
This fixes the case with multiple devices on the joining side: if we observe such a message from
another device, we mark an inviter as verified and an accepted contact thus causing a subsequent
"vg-member-added" message -- in case of a verified group -- to create it properly.
- Return Result from set_verified() so that it can't be missed.
- Pass Fingerprint to set_verified() by value to avoid cloning it inside. This optimises out an
extra clone() if we already have a value that can be moved at the caller side. However, this may
add an extra clone() if set_verified() fails, but let's not optimise the fail scenario.
- If bcc_self is set, gossip headers must be added despite of the number of group members.
- If another device observes Secure-Join, instead of looking for Secure-Join-Fingerprint in
"vg-member-added"/"vc-contact-confirm" messages it must use keys from Autocrypt-Gossip headers as
described in the Countermitm doc
(https://countermitm.readthedocs.io/en/latest/new.html#joining-a-verified-group-secure-join).
This allows to distinguish exceptions,
such as database errors, from invalid user input.
For example, if the From: field of the message
does not look like an email address, the mail
should be ignored. But if there is a database
failure while writing a new contact for the address,
this error should be bubbled up.
Very small PR; Motivation: Easier navigation using Go-To-definition.
Because, using go-to-definition of rust-analyzer on parse() doesn't take you to the actual parse() implementation but its trait definiton. On the other hand, it's very easy to find EmailAddress::new().
Hold the same write lock while checking if ongoing
process is already allocated and while allocating it.
Otherwise it is possible for two parallel processes
running alloc_ongoing() to decide that no ongoing
process is allocated and allocate two ongoing processes.
This makes the contact ID its own newtype instead of being a plain
u32. The change purposefully does not yet try and reap any benefits
from this yet, instead aiming for a boring change that's easy to
review. Only exception is the ToSql/FromSql as not doing that yet
would also have created churn in the database code and it is easier to
go straight for the right solution here.
The state bob needs to maintain during a secure-join process when
exchanging messages used to be stored on the context. This means if
the process was killed this state was lost and the securejoin process
would fail. Moving this state into the database should help this.
This still only allows a single securejoin process at a time, this may
be relaxed in the future. For now any previous securejoin process
that was running is killed if a new one is started (this was already
the case).
This can remove some of the complexity around BobState handling: since
the state is in the database we can already make state interactions
transactional and correct. We no longer need the mutex around the
state handling. This means the BobStateHandle construct that was
handling the interactions between always having a valid state and
handling the mutex is no longer needed, resulting in some nice
simplifications.
Part of #2777.
* Add AcManager
See https://github.com/deltachat/deltachat-core-rust/pull/2901#issuecomment-998285039
This reduces boilerplate code again therefore, improving the
signal-noise-ratio and reducing the mental barrier to start
writing a unit test.
Slightly off-topic:
I didn't add any advanced functions like `manager.get("alice");` because
they're not needed yet; however, once we have the AcManager we can
think about fancy things like:
```rust
acm.send_text(&alice, "Hi Bob, this is Alice!", &bob);
```
which automatically lets bob receive the message.
However, this may be less useful than it seems at first, since most of
the tests I looked at wouldn't benefit from it, so at least I won't do
it until I have a test that would benefit from it.
* Remove unnecessary RefCell
* Rename AcManager to TestContextManager
* Don't store TestContext's in a vec for now as we don't need this; we can re-add it later
* Rename acm -> tcm
This replaces the EventSink callbacks with simple channel senders.
This simplifies the TestContext a lot as that is much simpler to
handle. It then also removes the special-casing of the LogSink since
it now is another even sender, only injected at the very start.
* test one-to-one chats on setup-contact/secure-join
only one chat is created after scanning a QR code:
- on setup-contact, one-to-ones are created on both sided
- on secure-join, the joined group chat is created;
one-to-ones are not created intitally,
but should become visible on receiving messages
* make sure, Alice creates the chat with Bob on setup-contact
not totally sure if that change in #2508 was on-purpose,
however, all yet released versions
did create the one-to-one chat also on the Inviter's (Alice) side,
so, let's stay with that,
i do not see many reasons to change that.
* unblock hidden (Blocked::Yes) one-to-one chats
one-to-one chats may be hidden by secure-join,
in case someone later writes a message to it
(not unlikely), the chat needs to be shown.
before, messages are just not shown,
the corresponding chat did not appear.
the 'Blocked' wording of a 'Chat' must not be mixed with the
'Blocking' of a contact. 'Chat-Blocking' is mostly a visibility thing,
that may change as messages come in.
this change should not affect _really_ blocked contacts -
they are filtered out already before
and their messages are usually not even downloaded.
also, before allow_creation is checked,
that may disallow chat creation for show_emails reasons.
all in all, it just does the same
as if the user has manualy deleted the chat before and it would be created.
* simplify test
* refactor: cleanup send_handshake_msg()
- rename to send_alice_handshake_msg() as used by Alice only
- remove dead code from Bob
(Bob's code is at BobState::send_handshake_message() since some time)
- take a contact_id and not a chat_id;
this makes things less confusing when
info-messages are put to the final group chat
* always directly return chat-id from dc_join_securejoin()
* take care not to create a group twice
* adapt documentation
* add info-msg on group invites; add inviter directly after creation
* document existing 'joinqr' command in repl tool
* do not create empty one-to-one chats for group-joins
* refactor: cleanup fingerprint_equals_sender()
- the function takes a contact_id directly now.
before it consumes the first contact of a one-to-one chat -
which may be easily confused with the group-chat in creation.
moreover, the conversion contact_id -> chat_id -> contact_id
is unneeded overhead.
* show info-messages in destination chat for alice
* fingerprint_equals_sender() returns Err on database failure
* tweak documentation
* clarify what an 'unfinished tasks' task is.
* add regression test for create_for_contact_with_blocked()
* rename Blocked::Manually to better fitting Blocked::Yes
* tweak test_secure_join() and make sure, Alice and Bob have only on chat after a group-join
* add basic multi-device-sync functions
* generate json
* add context.parse_sync_items()
* add context.execute_sync_items()
* piggyback sync-commands message, add body for human-readable part
* avoid double json renderings
* mimeparser parses incoming .json sync-files
* do not piggyback sync-files
* execute sync items
* return status of send_sync_msg()
* send sync messages as multipart/report
* add a per-item-timestamp and also allow adding other per-item-fields in the future
* if the self-chat does not exist, create it blocked/hidden
* create tokens closer to real qr-code needs
* respect bcc_self setting, add test for that
* sync qr code tokens after promoting groups
* send sync-messages only if an experimental switch is set
* trigger send_sync_msg() after sending messages and after creating/redraw/revive qr-code
* add DC_STR_* constants to deltachat.h
* adapt to refactored qr module as of #2729
* tweak test
* use SendSyncMsgs config name instead of SendExperimentalSyncMsgs - we can remove or rename the config nevertheless, but have the option to keep it without renaming
* tweak docs
* remove currently unused effective timestamp calculation
* clarify when send_sync_msg() is called
* make sure, sync-messages are encrypted and are sent by SELF
* tweak docs, fix typos
