Hold scheduler lock during the whole procedure of scheduler starting
and stopping. This ensures that two processes can't get two read locks
in parallel and start loops or send the stop signal twice.
Also remove shutdown channels: it is enough to wait
for the loop handle without receiving a shutdown signal
from the end of the loop.
* Do ephemeral deletion in background loop
1. in start_io start ephemeral async task, in stop_io cancel ephemeral async task
2. start ephemeral async task which loops like this:
- wait until next time a message deletion is needed or an interrupt occurs (see 3.)
- perform delete_expired_messages including sending MSGS_CHANGED events
3. on new messages (incoming or outgoing) with ephemeral timer:
- interrupt ephemeral async task
* Changelog
* Fix and improve test
* no return value needed
* address @link2xt review comments
* slight normalization: have only one place where we wait for interrupt_receiver
* simplify sql statement -- and don't exit the ephemeral_task if there is an sql problem but rather wait
* Remove now-unused `ephemeral_task` JoinHandle
The JoinHandle is now inside the Scheduler.
* fix clippy
* Revert accidental move of the line
* Add log
Co-authored-by: holger krekel <holger@merlinux.eu>
Co-authored-by: link2xt <link2xt@testrun.org>
The state bob needs to maintain during a secure-join process when
exchanging messages used to be stored on the context. This means if
the process was killed this state was lost and the securejoin process
would fail. Moving this state into the database should help this.
This still only allows a single securejoin process at a time, this may
be relaxed in the future. For now any previous securejoin process
that was running is killed if a new one is started (this was already
the case).
This can remove some of the complexity around BobState handling: since
the state is in the database we can already make state interactions
transactional and correct. We no longer need the mutex around the
state handling. This means the BobStateHandle construct that was
handling the interactions between always having a valid state and
handling the mutex is no longer needed, resulting in some nice
simplifications.
Part of #2777.
* Make set_config() look a bit nicer
* Add OnlyFetchMvbox option
* Add test for the config
* Add option to only watch mvbox
This is supposed to support having a server-side rule which moves
emails to the mvbox already. The new option makes sure the mvbox is
wathched and also makes sure no messages are feched from folders other
than the mvbox and the spam folder if enabled. It does not interact
with the other settings.
* Fixup ignore conditions
* Cleanup some bits
* Watch the mvbox when `WatchMvboxOnly` is set
* Rename back to only_fetch_mvbox (flub said it's OK for him)
* typo
* clippy, more typos
Co-authored-by: Hocuri <hocuri@gmx.de>
To create encrypted account with account manager, call
dc_accounts_add_closed_account(). Open this account with
dc_context_open() using the passphrase you want to use for encryption.
When application is loaded next time and account manager is created,
it will open all accounts that have no passphrase set. For encrypted
accounts dc_context_is_open() will return 0. To open them, call
dc_context_open() with the correct passphrase. After opening, call
dc_context_start_io() on this account or just dc_accounts_start_io()
to start all accounts that are not started yet.
Support for legacy SQLite-based backup format is removed in this
commit.
- Replace .ok_or_else() and .map_err() with anyhow::Context where possible.
- Use .context() to check Option for None when it's an error
- Resultify Chatlist.get_chat_id()
- Add useful .context() to some errors
- IMAP error handling cleanup
Also resultified `get_watched_folders`.
Python test `test_moved_markseen` is modified to test using incoming
message instead of BCC-self message, because BCC-self message is
detected immediately in the Inbox.
`imap` table maps Message-IDs to UIDs on the server. `dc_receive_imf`
no longer gets the UID of the message as an argument and does not
insert the folder and UID of the message into the `msgs`
table. `server_folder` and `server_uid` columns in `msgs` table are
deprecated.
MoveMsg and DeleteMsgOnImap jobs are removed. Now messages are moved
and deleted only in the `fetch_move_delete` procedure that consults
the `target` column of the `imap` table to determine where the message
should go.
Where the message should go is determined after prefetching by the
`imap::target_folder()` procedure. Messages are only downloaded once
they reach their target folder to avoid race conditions in multidevice
setting, such as:
1. One device trying to FETCH the message while the other tries to
MOVE it.
2. One device marking the message as \Seen in the Inbox while the
other has already copied unseen message to the Movebox and is going to
delete the \Seen message in the Inbox.
3. Device downloads the message from the Inbox while there are newer
messages in the Movebox placed there by the other device, thus
processing the messages out of order.
* add basic multi-device-sync functions
* generate json
* add context.parse_sync_items()
* add context.execute_sync_items()
* piggyback sync-commands message, add body for human-readable part
* avoid double json renderings
* mimeparser parses incoming .json sync-files
* do not piggyback sync-files
* execute sync items
* return status of send_sync_msg()
* send sync messages as multipart/report
* add a per-item-timestamp and also allow adding other per-item-fields in the future
* if the self-chat does not exist, create it blocked/hidden
* create tokens closer to real qr-code needs
* respect bcc_self setting, add test for that
* sync qr code tokens after promoting groups
* send sync-messages only if an experimental switch is set
* trigger send_sync_msg() after sending messages and after creating/redraw/revive qr-code
* add DC_STR_* constants to deltachat.h
* adapt to refactored qr module as of #2729
* tweak test
* use SendSyncMsgs config name instead of SendExperimentalSyncMsgs - we can remove or rename the config nevertheless, but have the option to keep it without renaming
* tweak docs
* remove currently unused effective timestamp calculation
* clarify when send_sync_msg() is called
* make sure, sync-messages are encrypted and are sent by SELF
* tweak docs, fix typos
* draft a download-api
* basic implementation
* allow partial downloads for protected chats
* use a separate column for download_state
* force a minimal timeout for delete_server_after in combination with partial messages
* add a warning if a possible download may expire by delete_server_after
* test load_imap_deletion_msgid()
* add a test for a partial download
* improve documentation and visibility
* let get_download_limit() return Result<Option>
* rusty getters
* apply MIN_DELETE_SERVER_AFTER to shown availability time
* move stub-creation to download.rs, use stock-strings, nicer logging
* make clippy happy (cargo clippy --tests)
* refine tests and comments
* fix typo
* remove superfluous closure in ffi
* respect partial_download for immediately scheduled DeleteMsgOnImap jobs
* resultify update_recent_quota()
* add a device-message if quota exceeds QUOTA_WARN_THRESHOLD_PERCENTAGE
* check if a quota warning should be added during housekeeping, this is at least once a day
* dc_get_config("quota_exceeding") is useful for bots
* make clippy happy
* reword QuotaExceedingMsgBody message
* avoid lots of warnings if quota jitters around the warning threshold
* allow clippy::assertions_on_constants
these constants depend on each other, it makes sense to check that they are not changed in an incompatible way
This adds following settings:
- Socks5Enabled
- Socks5Host
- Socks5Port
- Socks5User
- Socks5Password
Currently http requests and dns requests are not getting executed as they currently can't get tunneled through socks5 proxy. Therefore gmail with oauth2 wont work through tor.
* add imap::get_quota_roots()
* schedule quote-checking job on getting connectivity-html
* get quota and debug print it
* basic quota output
* update quota at most once per minute, emit event on changes
* use more meaningful names
* add some comments, move update_recent_quota() to quota.rs
* show root name only if there are several roots
* make clippy happy, some refactorings
* allow only one update-quota job per time
* add now supported QUOTA to standards.md
the WAL files come from sqlite WAL mode,
they have the same name as the database file with an extra `-wal` suffix.
according to https://sqlite.org/wal.html#the_wal_file ,
the WAL file is part of the persistent state of the database
and should be kept with the database if the database is copied or moved.
Contact request chats are not merged into a single virtual "deaddrop"
chat anymore. Instead, they are shown in the chatlist the same way as
other chats, but sending of messages to them is not allowed and MDNs
are not sent automatically until the chat is "accepted" by the user.
New API:
- dc_chat_is_contact_request(): returns true if chat is a contact
request. In this case option to accept and block the chat via
dc_accept_chat() and dc_block_chat() should be shown in the UI.
- dc_accept_chat(): accept contact request and unblock the chat
- dc_block_chat(): decline contact request and block the chat
Removed API:
- dc_create_chat_by_msg_id(): deprecated 2021-02-07 in favor of
dc_decide_on_contact_request()
- dc_marknoticed_contact(): deprecated 2021-02-07 in favor of
dc_decide_on_contact_request()
- dc_decide_on_contact_request(): this call requires a message ID from
deaddrop chat as input. As deaddrop chat is removed, this call can't
be used anymore.
- dc_msg_get_real_chat_id(): use dc_msg_get_chat_id() instead, the
only difference between these calls was in handling of deaddrop chat
- removed DC_CHAT_ID_DEADDROP and DC_STR_DEADDROP constants
`Imap` structure is always created in a configured state now. There is
no default value for `ImapConfig` anymore.
Also resultify Scheduler::start() to fail on database errors, for
example if IMAP configuration cannot be read from the database during
`start_io()`. Previosuly errors during reading keys such as
`mvbox_watch` were simply ignored and folders were not watched until
the application is completely restarted, now start_io() will fail and
scheduler will only be started at the next start_io() call which
usually happens when app is brought to the foreground.
* Add failing test for #2369
* Completely ignore Drafts folder
fix#2369
* Also ignore messages that have the Draft flag set but are not in the Drafts folder
Using `impl AsRef<str>` as the argument instead of `&str` makes it
possible to call the function with `&str`, `String` and other types
that implement `AsRef` trait.
The cost of it is that compiled binary contains mulitple versions of
the same function, one for each variant of types. If function contains
multiple generic `impl AsRef` arguments, the number of versions possibly
compiled into binary grows exponentially with the number of arguments.
Simple way to avoid it is to call `.as_ref()` on the caller side to
convert the argument to `&str`. In most cases even adding a `&` and
relying on `Deref` coercion is sufficient.
This patch changes many functions that accepted `impl AsRef<str>` and
`impl AsRef<Path>` to accept `&str` and `&Path` instead.
In some places `.clone()` calls are removed. Calling `.clone()` on
`String` and passing `String` to a function accepting `impl
AsRef<str>` is completely unnecessary as `&str` reference could be
passed instead. There is no clippy warning against it yet, but
changing argument type to `&str` allowed to find these cases.
The result of debloating is not impressive, several hundred kilobytes
are saved, which is about 3% of the `.so` binary, but the code is
cleaner too.
This moves the module-level lookup and creation functions to the
types, which make the naming more consistent. Now the lookup_* get_*
and create_* functions all behave similarly.
Peraps even more important the API of the lookup now allows
distinguishing failure from not found. This in turn is important to
be able to remove reliance on a ChatId with a 0 or "unset" value. The
locations where this ChatId(0) is still used is in database queries
which should be solved in an independed commit.
ct.name was insufficient, as authname, overridden name and email address
fallback were not taken into account.
Dropping this condition increases performance by 25% according to the
benchmark.
Also add a test for search_msgs.
It reduces the time by ~20% according to `search_msgs` benchmark.
Sorting by IDs is sufficient for global search as IDs increase in the
order of message reception.
&str queries are not persistent by default. To make queries persistent,
they have to be constructed with sqlx::query.
Upstream sqlx does not contain the change that make all queries
persistent, but it is not needed anymore. but
Switches from rusqlite to sqlx to have a fully async based interface
to sqlite.
Co-authored-by: B. Petersen <r10s@b44t.com>
Co-authored-by: Hocuri <hocuri@gmx.de>
Co-authored-by: link2xt <link2xt@testrun.org>
