Previously system messages were always added to the end of the chat,
even if the message triggering them was sent earlier. This is
especially important for messages about disappearing timer reset
triggered by classic email messages, as they should be placed right
after the message resetting the timer.
"Archived Chats" also contain old contact requests now
(an maybe new one if the user archives them),
so, there may be easily some thousands chats in "Archived Chats" -
and the count has no real meaning to the user,
esp. as we not even display the number of "Real Chats".
Might be that this "Link" will go away anyway sooner or later,
however, for now, it is just fine to remove the badge counter.
* add a test for archived requests
* fix archived requests
* move requests but the last one to "Archived Chats"
this way, the app looks familiar after the contact request upgrade.
the subselect was copied from the old get_last_deaddrop_fresh_msg()
(which was removed by the contact request upgrade #2514)
* just move all old requests to "Archived Chats"
ux-wise, the advantage of keeping the last one is questionable,
one may think, always the last one is shown in chatlist.
showing _all_ fresh request is not doable
as past cores did not really take care of that
and the db-state is not consistent in that regard.
that would make the already complicated code even more complicated,
so we decided to go the easy way.
Contact request chats are not merged into a single virtual "deaddrop"
chat anymore. Instead, they are shown in the chatlist the same way as
other chats, but sending of messages to them is not allowed and MDNs
are not sent automatically until the chat is "accepted" by the user.
New API:
- dc_chat_is_contact_request(): returns true if chat is a contact
request. In this case option to accept and block the chat via
dc_accept_chat() and dc_block_chat() should be shown in the UI.
- dc_accept_chat(): accept contact request and unblock the chat
- dc_block_chat(): decline contact request and block the chat
Removed API:
- dc_create_chat_by_msg_id(): deprecated 2021-02-07 in favor of
dc_decide_on_contact_request()
- dc_marknoticed_contact(): deprecated 2021-02-07 in favor of
dc_decide_on_contact_request()
- dc_decide_on_contact_request(): this call requires a message ID from
deaddrop chat as input. As deaddrop chat is removed, this call can't
be used anymore.
- dc_msg_get_real_chat_id(): use dc_msg_get_chat_id() instead, the
only difference between these calls was in handling of deaddrop chat
- removed DC_CHAT_ID_DEADDROP and DC_STR_DEADDROP constants
Normally they should not end up in contact requests, but if they do,
we want to show them. Otherwise it is completely impossible to see
them until the chat is moved out of contact requests.
Since classical messages are not deleted when show_emails setting is
set to "0" and remain in the database, they should be shown
somewhere. Otherwise they may reappear later when the setting is
enabled again.
Using `impl AsRef<str>` as the argument instead of `&str` makes it
possible to call the function with `&str`, `String` and other types
that implement `AsRef` trait.
The cost of it is that compiled binary contains mulitple versions of
the same function, one for each variant of types. If function contains
multiple generic `impl AsRef` arguments, the number of versions possibly
compiled into binary grows exponentially with the number of arguments.
Simple way to avoid it is to call `.as_ref()` on the caller side to
convert the argument to `&str`. In most cases even adding a `&` and
relying on `Deref` coercion is sufficient.
This patch changes many functions that accepted `impl AsRef<str>` and
`impl AsRef<Path>` to accept `&str` and `&Path` instead.
In some places `.clone()` calls are removed. Calling `.clone()` on
`String` and passing `String` to a function accepting `impl
AsRef<str>` is completely unnecessary as `&str` reference could be
passed instead. There is no clippy warning against it yet, but
changing argument type to `&str` allowed to find these cases.
The result of debloating is not impressive, several hundred kilobytes
are saved, which is about 3% of the `.so` binary, but the code is
cleaner too.
This moves the module-level lookup and creation functions to the
types, which make the naming more consistent. Now the lookup_* get_*
and create_* functions all behave similarly.
Peraps even more important the API of the lookup now allows
distinguishing failure from not found. This in turn is important to
be able to remove reliance on a ChatId with a 0 or "unset" value. The
locations where this ChatId(0) is still used is in database queries
which should be solved in an independed commit.
This introduces the explicit ChatIdBlocked struct to more explicitly
create a chat with a blocked status. It also adds a common shortcut
to ChatId itself which is more natural to use in many cases.
* Remove sql::error submodule
Use anyhow errors instead.
* Remove explicit checks for open SQL connection
An error will be thrown anyway during attempt to execute query.
* Don't use `with_conn()` and remove it
* Remove unused `with_conn_async`
* Resultify markseen_msgs
- Currently, group images are compressed as well because it was easier to implement that way.
- Currently, in the unlikely case that the avatar is compressed down to 20x20 pixels but still bigger than 20KB, the user doesn't get any indication of this, the avatar simply isn't changed (at least on Android).
If we want to change this, the easiest way is probably to let `dc_set_config()` in the ffi call `error!()` if `Selfavatar` can't be set. The same might make sense for some or all other configs. BUUUUUT: At least Android doesn't show error!() toasts anymore, probably because they were used too often and too spammy.
- The factor by which we scale down if the file is too big is 1.5.
&str queries are not persistent by default. To make queries persistent,
they have to be constructed with sqlx::query.
Upstream sqlx does not contain the change that make all queries
persistent, but it is not needed anymore. but
Switches from rusqlite to sqlx to have a fully async based interface
to sqlite.
Co-authored-by: B. Petersen <r10s@b44t.com>
Co-authored-by: Hocuri <hocuri@gmx.de>
Co-authored-by: link2xt <link2xt@testrun.org>
This should make colors used by Delta Chat for emails similar to colors
used by XMPP clients implementing the same specification[1], such as
Conversations and Snikket.
Previously Delta Chat used only hardcoded 16 colors, so this change
should also increase the number of colors and make it easier to
distinguish different contacts.
[1] https://xmpp.org/extensions/xep-0392.html
This changes the internal stock strings API to be more strongly typed,
ensuring that the caller can not construct the stock string in the
wrong way.
The old approach left it to the callers to figure out how a stock
string should be created, now each stock string has their specific
arguments and callers can not make mistakes. In particular all the
subtleties and different ways of calling stock_system_msg() disappear.
This could not use a trait for stock strings, as this would not allow
having per-message typed arguments. So we needed a type per message
with a custom method, only by convention this method is .stock_str().
The type is a enum without variants to avoid allowing someone to
create the type.
Sadly the fallback string and substitutions are still far away from
each other, but it is now only one place which needs to know how to
construct the string instead of many.
renaming mailing lists and setting mailinglists images
(possible locally, but not synced)
was blocked because the function real_group_exists() checked
the chattype on a numerically.
it is not 100% clear to me,
why this function exist at all,
it just checks if a record with type=120 (group) exists under the given id -
this is the same as loading the chat and check chat.typ afterwards.
might be a premature optimisation relict from core-c
or made some error handling easier there.
* Copypaste-merge my old work
* Start implementing mailinglists the new way
* Create pseudo contact
* Fine-tune docs
* Remove some unnecessary changes
* style
* Make a stock str
* Fix a crash. Yes, this line caused a panic when reconfiguring on Android
(without a reasonable error log). Also, I could not receive any messages
anymore.
* rfmt
* Add tests and make them pass
* Even more tests
* rfmt
* Enhance test and fix bug
* Don't update the sender name when prefetching because maybe it's a mailing list
* Use an enum instead of numbers for the decision
* Don't remove anyone from mailing lists
* Fix bug in the regex
* Adjust error msg
* Compile error after rebase
* Correctly emit event
* Add dc_msg_is_mailing_list so that you can find out whether messages in the deaddrop belong to mailing lists.
* Add received headers to unit tests
* Comments, small tweaks
* Use dc_msg_get_override_sender_name instead of dc_msg_get_sender_name
* Add dc_msg_get_sender_first_name() because sometimes the first name was not correctly shown in mailing lists
* small fixes, don't let the user modify mailing list groups
* Hide contacts for addresses like noreply@github.com and reply+AEJ...@reply.github.com
When testing mailing lists, I noticed that sometimes a mailing list
contact got a name (like, hocuri <noreply@github.com>). It turned out
that ages ago, I had accidentally written an email to - in this example
- hocuri <noreply@github.com> and it had been added to the contacts
list.
This hides email addresses from the contacts list that are obviously not
meant to be written at and prevents updating the names.
* Comment, clippy
* Replace u32 with ChatId
* Resolve lost of small issues from the reviews
* remove dc_msg_get_sender_first_name
* add dc_msg_get_real_chat_id()
this allows to check if a contact request belongs to a mailing list
and to show name/avatar/whatever of the mailinglist.
another approach was to duplicate some chat-apis for messages
(eg. dc_msg_is_mailing_list()) however that would require far more new apis.
the idea to change the behavior of dc_msg_get_chat_id() would be
more clean, however, that easily breaks existing implementations
and can led to hard to find bugs.
* remove now unused Message.is_mailing_list()
* if a name for a mailing list is missing, use List-ID
* fix comment
* fix error message
* document how dc_get_chat_contacts() works for mailing lists
* refine decide api (#2185)
* add DC_DECIDE* constants to deltachat.h, tweak documentation
* use StartChat/Block/NotNow instead of Yes/Never/NotNow
* decide_on_contact_request works on ctx/msg-id
functions working on message-objects
usually do not read or write directly on the database.
therefore, decide_on_contact_request()
should not work with message-objects as well,
it is even a bit misleading, as eg. chat-id of the object is not modified.
instead, the function works on context,
similar to dc_send_msg(), dc_create_chat() and so on.
for now, i moved it to context, could maybe be part od MsgId.
* Update src/chatlist.rs
Co-authored-by: Hocuri <hocuri@gmx.de>
Co-authored-by: Hocuri <hocuri@gmx.de>
* refine documentation
* re-add accidentally deleted Param::MailingList
* remove pseudo-contact in domain @mailing.list
1. the pseudo-contact was added to the mailing list contacts,
which is not needed.
might be that we want to add the recent contacts there in a subsequent pr
(we do not know all contacts of a mailing list)
2. the pseudo-contact was used to block
mailing lists; this is done by setting the chat to Blocked::Manually now
3- the pseudo-contact was used for unblocking;
as it is very neat not to require additional ui for mailing list unblocking,
might be that we introduce a similar pseudo-contact for this limited purpose
in a subsequent pr, however, the pseudo-contact needs to exist only
during unblocking then, maybe also the special domain is not needed,
we'll see :)
* Move dc_decide_on_contact_request() up to the dc_context section as it's a member of dc_context now
More specifically, to the "handle messages" section
* re-introduce Chattype::Mailinglist (#2195)
* re-introduce Chattype::Mailinglist
* exhaustive chattype-check in fetch_existing_msgs() and get_summary2()
* exhaustive chattype-check in ndn_maybe_add_info_msg()
* exhaustive chattype-check in message::fill()
* remove dc_chat_is_mailing_list() from ffi
Co-authored-by: B. Petersen <r10s@b44t.com>
